General Laboratory
Items 951 to 1000 of 1183
£ 260.00 (ex. VAT) 1 in stock
Electrothermal Slide Drying Bench Model MH6616 Lab
ITEM-45550
Electrothermal Slide Drying Bench MH6616 Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in reasonably good cosmetic condition.
£ 260.00 (ex. VAT) 1 in stock
Electrothermal Slide Drying Bench MH6616 Lab
ITEM-45541
Electrothermal Slide Drying Bench MH6616 Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in reasonably good cosmetic condition.
£ 260.00 (ex. VAT) 1 in stock
Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E Lab Faulty CO2 Sensor
ITEM-20233
This Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). The temperature sensor was replaced and seems to be working as it should. However, the unit appears to have a faulty CO2 sensor and will not regulate properly.
When set at 37ºC the display showed 37˚C and our thermometer read 37.7ºC
When set at 55ºC the display showed 58.4˚C and our thermometer read 55.5ºC
Unit dimensions L68cm x W65cmx H103cm
Interior dimensions:
H60cm x W50cm x D48cm
£ 260.00 (ex. VAT) 1 in stock
Mettler Toledo 340 pH Meter with Probe Lab
ITEM-38367
Mettler Toledo 340 pH Meter with Probe
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with minor marks.
£ 260.00 (ex. VAT) 1 in stock
VWR 6L Model VWB6 Water Bath Lab
ITEM-35999
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order (digital thermometer not included).
It is in good cosmetic condition with minor marks.
Includes manual
£ 260.00 (ex. VAT) 1 in stock
LABCONCO 7455100 Centrifugal Evaporator Rotor with 148 x 2ml Wells Lab
ITEM-20036
LABCONCO Centrifugal Evaporator Rotor with 148 x 2ml Wells
This was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition with some light marks from use but has not been tested.
£ 255.00 (ex. VAT) 1 in stock
Lot of Cole Parmer MasterFlex Pump Heads & Drives - 7014-52, 7024-20, 7013-20
ITEM-27758
Lot of Cole Parmer MasterFlex Perstaltic Pump Heads
These were removed from a university lab where they were surplus to requirements.
Included are;
2 x Masterflex Cole Parmer Pump Drives
Mod Nos. 7544-06
Speed 6rpm
The units power on and are in good cosmetic condition with marks and stains.
1x Pump drive has what looks like a terminal block wire connector. We attached a plug for testing but later removed it.
Pump Drive Dims:
L27cm x W10cm x H11cm
Pump-Head Dims:
L6cm x W7.5cm x H8cm
Masterflex Cole Parmer Pump Heads:
Part Nos. 3,358,609 - all have the same Part No.
2x Model 7014-52
The units are in good cosmetic condition.
There are some surface stains on all of the unit's ball bearings from general use. The ballbearing mechanism was tested by hand the action felt smooth.
2x Model 7024-20
The units are in good cosmetic condition. The ballbearing mechanism was tested by hand the action felt smooth.
2x 7013-20
The unit is in good cosmetic condition.
The ballbearing mechanism was tested by hand the action felt it had some resistance. One of the fluid dispersing mechanisms stuck inside the housing of one of these pump heads.
£ 255.00 (ex. VAT) 1 in stock
PTI F10B-6x500 Centrifuge Rotor Lab
ITEM-26438
This PTI F10B-6x500 Centrifuge Rotor was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition but has some heavy staining.
It has not been tested and will need to be inspected for safety by a qualified technician or engineer before use.
It holds 6 x 500mL vessels.
£ 255.00 (ex. VAT) 1 in stock
Haskris Recirculating Chiller Model: R050 Lab
ITEM-22031
This Haskris Recirculating Chiller Model: R050 was removed from a university lab where it was surplus to requirements.
The unit powers up and the warning light indicates the tank is full. It has not been tested further.
The item is in reasonable cosmetic condition but there are some stains/scratches on the outer panels as well as rust and other water damage.
£ 255.00 (ex. VAT) 1 in stock
Oxford Intelligent Level Meter ILM 210 Lab
ITEM-20504
This Oxford Intelligent Level Meter ILM 210 was removed from a university lab where it was surplus to requirements.
The unit powers on but we were unable to test it further. The unit shows an error on the display, but this is down to it not being connected to gas.
It was not tested further.
It is in good cosmetic condition with some minor marks from use.
£ 250.00 (ex. VAT) 1 in stock
IKA-Labortechnik Ultra-Turrax T25 S7 Laboratory Homogeniser
ITEM-45363
IKA-Labortechnik Ultra-Turrax T25 S7 Laboratory Homogeniser
This item was removed from a university laboratory where it was surplus to requirements.
The homogeniser powers on and operates smoothly across all speed settings. The speed control functions as intended, with no issues observed.
It is in reasonably good cosmetic condition, with marks from use.
Homogeniser teeth not included.
Specifications.
- Model: T25 S7
- Serial No.: 682708
- Minimum Speed: 8000 RPM
- Maximum Speed: 24000 RPM
£ 250.00 (ex. VAT) 1 in stock
VWR Clifton NE2-22D 22L Waterbath Lab
ITEM-45278
VWR Clifton NE2-22D 22L Waterbath Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition
There is no lid included.
£ 250.00 (ex. VAT) 1 in stock
Cytiva VIA Thaw MD1000 Dry Automated Thawing Machine Lab
ITEM-45308
Cytiva VIA Thaw MD1000 Dry Automated Thawing Machine
This item was removed from a university lab where it was surplus to requirements.
It powers on and is in very good cosmetic condition, still in its original packaging.
Included Components:
- VIA Thaw MD1000 Operator Manual
- VIA Thaw MD1000 Clue Card
- VIA Thaw MD1000/VIA Thaw L1000 Thawing Tray Assembly
Specifications:
- Model: VIA Thaw MD1000
- Serial No.: TBM0920201
Note: Item was temperature-tested for thawing functionality (thermometer not included).
£ 250.00 (ex. VAT) 1 in stock
Heraeus Instruments Rotor #8155 4100RPM with 4 Buckets & Adaptors Lab
ITEM-44974
Heraeus Rotor #8165
This item was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition.
Specifications:
- Rotor Capacity: 4x500ml
- Max Speed: 4100 min
Included:
- 2 x Buckets #8160D
- 2 x Buckets #8160H
- 4 x Adaptors (hold 4 x 50ml tubes each)
- 2 x Adaptors (hold 12 x 12-15ml tubes each)
£ 250.00 (ex. VAT) 1 in stock
Sigma 4-15 Benchtop Centrifuge with Sigma Swing Bucket Rotor and Buckets Lab
ITEM-42158
Sigma 4-15 Benchtop Centrifuge with Sigma Swing Bucket Rotor and Buckets
This item was removed from a university lab where it was surplus to requirements.
The centrifuge and rotors are in good cosmetic condition and good working order.
Includes the following:
- Sigma Centrifuge model: 4-15
- Serial No.: 107405
- Part No.: 10730
- Year: 2004
- Max speed: 13,500 rpm
- Sigma Swing Bucket Rotor:
- Model No.: 1150 19/D
- Max speed: 5100 rpm
- Max weight: 4 x 200g
- Buckets:
- 4 x Sigma 13350 Swinging Buckets (277/D, 666g)
- Tube Holders:
- 4 x Sigma 90147 Tube Holders (347g, 10 x 22mm tube positions)
£ 250.00 (ex. VAT) 1 in stock
StateBourne CryoLab 10 Liquid Nitrogen Cryogenic Storage Dewar
ITEM-41587
StateBourne CryoLab 10 Liquid Nitrogen Cryogenic Storage Dewar
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic, we are unable to test it further at our facility.
£ 250.00 (ex. VAT) 1 in stock
IKA Vibrax VXR Basic Orbital Shaker Lab
ITEM-39106
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.
£ 250.00 (ex. VAT) 1 in stock
Stuart SB 161-3 Magnetic Stirrer 3-Position Lab
ITEM-39102
Stuart SB 161-3 Magnetic Stirrer 3-Position
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.
£ 250.00 (ex. VAT) 1 in stock
Heidolph RZR 50 Overhead Benchtop Stirrer Lab
ITEM-37714
This Heidolph RZR 2102 Control-z High Viscosity Overhead Stirrer was removed from a working lab where it was surplus to requirements.
The unit powers up and is in good working order.
Gear 1: 45-300rpm
Gear 2: 300-2000rpm
It is in good cosmetic condition with minor surface damage.
The unit sits on a sturdy cast iron 'H" base 42 x 44cm
Power supply inlcluded.
£ 250.00 (ex. VAT) 1 in stock
Planer Kryo 360 - 1.7 Controlled Rate Freezer - Chamber GDKRYO 360CH-1.7-230
ITEM-37028
Planer Kryo 360 - 1.7 Controlled Rate Freezer - Chamber GDKRYO 360CH-1.7-230
This was removed from a university lab where it was surplus to requirements.
The unit powers up but unfortunately without the controller we were unable to test the freezing function.
It is in good cosmetic condition with minor marks.
Model - GDKRYO 360CH-1.7-230
SN - 28092-2013
Capacity - 1.7L
£ 250.00 (ex. VAT) 1 in stock
VWR 6L Water Bath Model VWB6 Lab
ITEM-35998
VWR 6L Water Bath Model VWB6
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order (digital thermometer not included).
It is in good cosmetic condition with minor marks.
Includes manual
£ 250.00 (ex. VAT) 1 in stock
DW Scientific MACS-MG-1000 Anaerobic Workstation Laboratory Incubated Glovebox
ITEM-24289
This DW Scientific MACS-MG-1000 Anaerobic Workstation Laboratory Incubated Glovebox was removed from a university lab where it was surplus to requirements.
The unit has not been used in some years and will need a full service before it is used again. The gloves will also all need replacing.
All the parts of the unit are in very good condition. and they all powered on with no issues. It's in good working order. The door lock system on the glove ports all works correctly.
The heating function works and was tested with a digital thermometer
It was set to 37˚C, our thermometer measured 36.7˚C ad the display was showing 36.9˚C. The temperature did fluctuate slightly but was never above the set value.
The gas system was not tested.
The glove box's internal dimensions are 185cm(L) x 69cm (W) x 79cm (H).
The airlock unit's internal dimensions are 30cm (L) x 35cm (W) x 30cm (H).
The system is mounted on a substantial metal frame with wheels that stands at 94cm to platform height.
£ 250.00 (ex. VAT) 1 in stock
Beckman Coulter SW 41 Ti 41,000 RPM Rotor Lab
ITEM-45556
Beckman Coulter SW 41 Ti 41,000 RPM Rotor
This item was removed from a university where it was surplus to requirement.
It is in good used condition, we are unable to test it further at our facility.
Includes all 5 Buckets.
Specifications.
- Max Speed: 41,000 RPM
- Model: SW 41 Ti
- S/N: 13 E 2946
£ 245.00 (ex. VAT) 1 in stock
Labnet Spectrafuge 24D Benchtop Laboratory Centrifuge with Rotor Lab
ITEM-36076
Labnet Spectrafuge 24D Benchtop Laboratory Centrifuge with Rotor
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order to 13,300rpm, but does whistle at higher speeds.
It is in good cosmetic condition with marks from use.
Model#: 24D
Cat#: C2400-T-230
Serial#: D 607625
The rotor holds 24 x 1.5/2ml tubes.
£ 235.00 (ex. VAT) 1 in stock
Beckman Coulter Type JA 14 Rotor - 6 x 250ml - 14000rpm Lab
ITEM-35937
This Beckman Coulter Type JA 14 Rotor was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition but has not been tested at our facility.
Max RPM- 14000
Capacity- 6 x 250ml
Type- JA 14
Serial number- 91E634
£ 235.00 (ex. VAT) 1 in stock
FisherBrand Grant FB60307 Heated Laboratory Water Bath lab
ITEM-27768
This FisherBrand Grant FB60307 Heated Laboratory Water Bath was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. it was tested with a digital thermometer (not included).
Set the temp at 37ºC, our thermometer read 38.2ºC (units internal thermometer read 37.4ºC)
Set the temp at 55ºC, our thermometer read 55.9ºC (units internal thermometer read 55.6ºC)
Set the temp at 99ºC, our thermometer read 93.6ºC (units internal thermometer read 96.1ºC)
Accessories:
Plastic Inserts;
1x Melform, L46cm x W25cm x H2cm
2x Bourgeat, L25cm x W10cm x H2cm
2x Bourgeat, L25cm x W19cm x H2cm
Lid: L39cm x W29cm x H18cm
Interior Dims:
L50cm x W30cm x D20cm
£ 230.00 (ex. VAT) 1 in stock
Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge with Rotor Lab
ITEM-25267
This Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge was removed from a university lab where it was surplus to requirements.
The item powers on and is in working order with the speed running up to 4000rpm.
The item is in a reasonable, used cosmetic condition.
It is fitted with a Fanem Rotor with 8 x 15ml Yellow buckets
£ 230.00 (ex. VAT) 1 in stock
Thermo Scientific CRYOPLUS 2 Liquid Nitrogen Storage System Lab
ITEM-19550
This unit was removed from a lab during a clearout. The unit requires LN2 to be properly tested which we do not have at our site so the unit has not been tested by us. However we anticipate that it should be in good working order.
Lockable freezer
Powers on
In good condition with a few scuffs and scratches and surface rust.
Partial damage to the rubber seal on RHS of the lid of the freezer.
Functioning buttons
Freezer lock Key supplied
Button lock keys supplied
Easy to move around on four rotating wheels.
Please note if you encounter any issues with this unit within 45 days of delivery we can of course offer a full refund in exchange of return of the equipment but we cannot cover costs for lost nitrogen, samples, or other consequential loss.
£ 230.00 (ex. VAT) 1 in stock
Hettich E1547 Lab Centrifuge Rotor 48 x 3g, 1136, 13000 RPM
ITEM-09570
This rotor was removed from a lab during a clearout.
We have not tested the rotor so it will need to be checked and tested prior to use in your centrifuge.
£ 225.00 (ex. VAT) 1 in stock
SAVANT DNA Speed Vac DNA110-230 Concentrator Centrifuge Lab
ITEM-45213
Savant DNA Speed Vac DNA110-230 Concentrator Centrifuge
This item was removed from a university lab where it was surplus to requirements.
The concentrator centrifuge powers on and is in good cosmetic condition.
Model: DNA110-230
Serial No.: DNA110-6D1503
£ 225.00 (ex. VAT) No longer available
Sorvall RT6000B Centrifuge w/3600 RPM Rotor - Sorvall H1000B Lab
ITEM-23286
This Sorvall RT 6000B Centrifuge w/3600 RPM Rotor - Sorvall H1000B was removed from a university lab where it was surplus to requirements.
The unit powers up and the rotor runs well up to 3600rpm.
The refrigeration was tested with a digital thermometer (not included).
We set the chamber temperature dial to 4°c and the thermometer dropped to 4.5°c.
We then set the temperature to the minimum of -20°c and it dropped quite quickly to -28°c.
It is in reasonably good cosmetic condition with some marks from use. the rotor has some rust on it
Included with it are;
1 x Rotor - Sorvall H1000B
3600 Max RPM
4 x Du Pont Swinging Buckets (PN - 11053)
2 x Yellow Sorvall Bucket Adapters (00846) 25mm hole diameter.
2 x Blue Sorvall Bucket Adapters (00830) for 50ml tubes.
2 x Black Sorvall Bucket Adapters (00884) for 15ml tubes.
£ 220.00 (ex. VAT) 1 in stock
Leitz Weltzar Microtome Lab
ITEM-25167
This Leitz Weltzar Microtome was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition and all the levers and dials move freely.
£ 215.00 (ex. VAT) 1 in stock
SAVANT DNA Speed Vac DNA110-230 Concentrator Centrifuge Lab
ITEM-34836
This SAVANT DNA Speed Vac DNA110 Concentrator Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. The filter is missing from the solvent exhaust.
It is in good cosmetic condition with marks from use.
£ 215.00 (ex. VAT) 1 in stock
Large Job Lot of Plastic Laboratory Cryogenic Storage Boxes Nalgene Simport
ITEM-31064
Large Job Lot of Plastic Laboratory Cryogenic Storage Boxes Nalgene Simport
These were removed from a lab where they were surplus to requirements. They have all been used but are in reasonably good cosmetic condition.
117 x Simport T314-2100
18 x Nalgene System 100
4 x Nalgene (Cat no. 5026-0909)
4 x Nalgene (Cat no. 5027-0909)
1 x Taylor-Wharton
1 x Nunc
1 x Thermo Scientific
2 x Blue Unbranded
2 x Green Unbranded
2 x Star Lab
4 x CryoFreeze
2 x Fisherbrand (Clear)
19 x Clear Unbranded
3 x Novus Biologicals
39 x Nalgene (Cat no. 5025-0505)
£ 215.00 (ex. VAT) 4 in stock
Maestro CH1 Undersink Water Chiller Lab
ITEM-10520
This Maestro CH1 Undersink Water Chiller was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further.
It is in good cosmetic condition with some marks from use.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.
£ 210.00 (ex. VAT) 1 in stock
Thermo Scientific CRYOPLUS 2 Liquid Nitrogen Storage System Lab
ITEM-18933
This unit was removed from a lab during a clearout. The unit requires LN2 to be properly tested which we do not have at our site so the unit has not been tested by us. However we anticipate that it should be in good working order.
Lockable freezer
Powers on
Has dents and scratches, along with rust stains along the metal joints and the base.
Mold along rubber of lid. There's liquid and rubbish inside that cannot be entirely removed.
Functioning buttons
Freezer lock Key supplied
Button lock keys supplied
Easy to move around on four rotating wheels.
Please note if you encounter any issues with this unit within 45 days of delivery we can of course offer a full refund in exchange of return of the equipment but we cannot cover costs for lost nitrogen, samples, or other consequential loss.
£ 210.00 (ex. VAT) 1 in stock
MSE Mistral 6000 Laboratory Ultracentrifuge Rotor Bucket Inserts & Manual Lab
ITEM-18720
This MSE Mistral 6000 Laboratory Ultracentrifuge Rotor Bucket Inserts & Manual was removed from a university lab where it was surplus to requirements.
The inserts are in good condition but may have some pen marks and scuffs. None of the units have been tested.
Included are;
18 x Blue with 37 holes in each.
7 x Green with 19 holes in each.
5 x White with 19 holes in each.
3 x Red with 5 holes in each.
2 x Grey with 16 holes in each.
12 x Small tubes
1 x Larger tube
1 x Minstral 6000 Large Capacity Refrigerated Centrifuge Operating Manual.
We were unable to test the accessories.
£ 205.00 (ex. VAT) 1 in stock
Sorvall HB-6 13000rpm Centrifuge Rotor - 6 x 50ml Lab
ITEM-24811
This Sorvall HB-6 13000rpm Centrifuge Rotor was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition with marks from use but has not been tested. It will need to be inspected by a qualified technician or engineer before it is used again.
It holds 6 x 50mL tubes.
£ 205.00 (ex. VAT) 1 in stock
LDC Analytical Solvent Delivery System Consta Metric 3200 Lab
ITEM-24598
This LDC Analytical Solvent Delivery System Consta Metric 3200 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. There are some light scuffs and scratches around the unit from general use. We were unable to test it further at our facility.
£ 205.00 (ex. VAT) 1 in stock
Heraeus HeraCell 240 CO2 Laboratory Incubator Lab
ITEM-24395
This Heraeus Hera Cell 240 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers on and was charged with CO2 to 5% and tested with a digital thermometer (not included).
The temperature was set to 37˚c which it reached after running for an hour. (the thermometer read 41˚c)
It was then set to the maximum of 55˚c and it reached about an hour or so later (the thermometer read 59˚c).
It is in reasonable, used cosmetic condition with marks from use.
Inside dimensions - D56 W61 H67 CM
2 Shelves - 50 x 56cm
£ 200.00 (ex. VAT) 1 in stock
Scie-Plas GLE-UVSC UV Sterilisation Cabinet / Workstation Lab
ITEM-45365
Scie-Plas GLE-UVSC UV Sterilisation Cabinet / Workstation
This item was removed from a university laboratory where it was surplus to requirements.
The cabinet powers on, with both UV and white lights functioning. The UV light automatically switches off when the cabinet is opened. It is in fair cosmetic condition, with visible stress marks and cracks on the plexiglass as shown.
Specifications.
- Model: GLE-UVSC
- Serial No.: 2567
£ 200.00 (ex. VAT) 1 in stock
Taylor-Wharton Liquid Nitrogen Dewar Tank Model - LS750 Lab
ITEM-19982
This Taylor-Wharton Liquid Nitrogen Dewar Tank Model - LS750 was removed from a university lab where it was surplus to requirements.
It is supplied with 6 x Sample Racks with 30 x Nalgene Sample boxes (cat no. 5025-0505).
The cap is missing off the blue polystyrene lid but it is in otherwise in reasonably good cosmetic condition.
We were told that the vacuum on this vessel still holds well, but we have not tested it at our site. If you encounter any issues within 45 days of purchase we can offer a refund in exchange for the return of goods. But we cannot reimburse consequential loss for lost nitrogen, samples, etc.
£ 200.00 (ex. VAT) 1 in stock
Oertling Vintage Balance Scales Model 146 Metric Manufactured In Britain
ITEM-42186
Oertling Vintage Balance Scales Model 146 Metric Manufactured in Britain
This Vintage Balance Scale was removed from a university lab where it was surplus to requirements.
This item is in excellent condition.
The model was produced between 1953 and 1980 and features a hardwood case with a cast iron chassis. All adjusting
levers and mechanical parts move freely. No further testing was conducted.
Specifications:
- Model: 146
- Serial No.: 24895
£ 200.00 (ex. VAT) 1 in stock
Reichert-Jung UltraCut Microtome 701701
ITEM-40913
This Reichert-Jung UltraCut Microtome 701701 was removed from a university lab where it was surplus to requirements.
The item is in reasonably good cosmetic condition and is mechanically sound.
We were unable to power it up as we did not have the correct PSU.
£ 200.00 (ex. VAT) 1 in stock
LDC Analytical Solvent Delivery System ConstaMetric 3200 Lab
ITEM-24600
This LDC Analytical Solvent Delivery System Consta Metric 3200 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. There are some light scuffs and scratches around the unit from general use. We were unable to test ti further at our facility.
£ 200.00 (ex. VAT) 1 in stock
LDC Analytical Solvent Delivery System Consta Metric 3200 Lab
ITEM-24599
This LDC Analytical Solvent Delivery System Consta Metric 3200 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. There are some light scuffs and scratches around the unit from general use. We were unable to test ti further at our facility.
£ 200.00 (ex. VAT) 1 in stock
Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank Lab
ITEM-17263
This Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has some marks from use. It comes with a set of 6 freezer racks.
We were assured this unit was in good working order and held vacuum. However we do not have a supply of nitrogen at our site so we have not tested it ourselves.
If there is any problem we can certainly offer a full refund in exchange of return of the item, and within the UK we will arrange pickup as long as you can put the unit back onto the pallet.
However we cannot reimburse lost nitrogen costs or sample loss etc.
£ 195.00 (ex. VAT) 1 in stock
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes Lab
ITEM-36134
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes
This was removed from a university lab where it was surplus to requirements
The unit was tested at 2800 rpm at 50 Hz, and 3500 rpm at 60 Hz. It ran at both speeds without an issue.
Itt comes with a choice of interchangeable rotors for different microtube sizes/combinations 0.5/0.2/1.5
It is in excellent cosmetic condition.
Item also includes:
2 x Protein LoBind Tube 0.5mL
100 Safe-Lock Tubes
Cat#: 022431064
DNA LoBind Tube 0.5mL
500 Safe-Lock Tubes
Cat#: 0030 108 400
DNA LoBind Tube 1.5mL
250 Safe-Lock Tubes
Cat#: 022431021
£ 195.00 (ex. VAT) 1 in stock
ALC T537 Microplate Rotor with Plate Buckets 4100rpm Lab
ITEM-19021
This ALC T537 Microplate Rotor was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition but has some marks from use.
The buckets are marked 1 & 2. ALC O-V17 O-M17 O-E17 O-F17.
Cat.No. 1120076
The unit has not been tested and will need to be inspected for safety before it is used.
£ 190.00 (ex. VAT) 1 in stock
Janke & Kunkel IKA-Labortechnik TP18/10 Homogeniser & TR50 Controller Lab
ITEM-24950
Janke & Kunkel IKA-Labortechnik TP18/10 Homogeniser & TR50 Controller
This was removed from a university lab where it was surplus to requirements.
The items are in reasonable cosmetic condition with marks from use. The feet on the base of the controller have broken off.
Both items power on and the homogeniser is working.
Items 951 to 1000 of 1183