General Laboratory

NEW ITEM

£ 1,000.00 (ex. VAT) 1 in stock

22 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab

ITEM-35858

22 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights

These were removed from a university lab where they were surplus to requirements.

The units are brand new and unused.

Includes:

22 x Ohaus 200g weights

22 x power supplies

22 x manuals

£ 1,000.00 (ex. VAT) 1 in stock

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

ITEM-35931

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

Max RPM-1800

Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes.

Centrifuge model number- VR maxi-1

Centrifuge serial number- 804040235

Freeze dryer model number- CT/DW 110

Freeze dryer serial number- 804050097

Maxi dry model number- MAXI-DRY PLUS

Maxi dry serial number- 804060037

£ 1,000.00 (ex. VAT) 1 in stock

Barnstead Genevac miVac Duo Concentrator DUC-23050-A00 Lab

ITEM-36306

Barnstead Genevac miVac Duo Concentrator DUC-23050-A00

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working to 1400rpm, and the heating function is also working. It has not been tested under a vacuum.

It is in good cosmetic condition with minor marks form use. There is some cosmetic crazing on the lid.

£ 1,000.00 (ex. VAT) 1 in stock

FLUIDX X-seal HT124S Variable Temperature Thermal Sealer Lab

ITEM-36488

FLUIDX X-seal HT124S Variable Temperature Thermal Sealer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

FLUIDX X-seal Thermal Sealer

Model: Xseal HT124S

Serial#: 41135

£ 1,000.00 (ex. VAT) 1 in stock

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

ITEM-36505

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

This was removed from a university lab where it was surplus to requirements.

All the units power up but have not been tested further.

It is in good cosmetic condition with minor marks.

It is made up of the following modules;

1x Tecan RSP 5031 Robotic Sample Processor

S/N: 1652 JR

1x Emka STC 8808

S/N: 00454

1x Emka IOS 3

S/N: 00371

1x Emka Switching Unit

S/N: No serial number

1x Haake DC10 Circulator

Type: 003-2859

S/N: 1WDIN12879

£ 1,000.00 (ex. VAT) 1 in stock

Statebourne Biostor 24 Cryogenic Liquid Nitrogen Storage Dewar Lab

ITEM-23970

This Statebourne Biostor 24 Cryogenic Liquid Nitrogen Storage Dewar was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in reasonably good cosmetic condition with some marks from use.

Specs;

Volume 380L

Internal diameter 788mm

External diameter 900mm

Internal height 835mm

External height 1193mm

£ 1,000.00 (ex. VAT) 1 in stock

Elga Veolia Purelab Chorus PC110COBPM1 Water Purification System

ITEM-49689

Elga Veolia Purelab Chorus PC110COBPM1 Water Purification System

This system was removed from a facility where it was surplus to requirements.

The item is in good cosmetic condition, with a small crack on the main unit. It powers on, but no further testing has been carried out.

Included components:

ELGA LC197 Biofilter
Tubing set

£ 1,000.00 (ex. VAT) 1 in stock

Newport Pneumatic Isolation Optical Table System w/ Thorlabs PBH51510 Breadboard

ITEM-50638

Newport Pneumatic Isolation Optical Table System – M-VIS3030-IG2-125A Frame with Thorlabs PBH51510 Breadboard

This system is sold on behalf of a client where it is no longer required.

It is in good cosmetic condition.

The equipment consists of a compact pneumatic-isolation optical table assembly comprising a Newport vibration-isolated wheeled frame paired with a Thorlabs Performance Series I optical breadboard.

System Components

Optical Table Frame

Newport pneumatic isolation frame

Model: M-VIS3030-IG2-125A
Dimensions: 750 × 750 mm
Integrated pneumatic vibration isolation
Fitted with wheels for easy movement

Optical Breadboard

Thorlabs Performance Series I breadboard

Model: PBH51510
Dimensions: 750 × 750 × 60 mm
M6 tapped hole pattern
60 mm thick damped construction

The system is available for collection from Cambridge, UK.

£ 1,000.00 (ex. VAT) 1 in stock

Chart MVE 500 Series MVE510AF-GB Liquid Nitrogen Tank Dewar

ITEM-31739

Chart MVE 500 Series MVE510AF-GB Liquid Nitrogen Tank Dewar

This was removed from a university lab where it was surplus to requirements.

The unit powers up and we have the password available. We were unable to test it further.

It is in good cosmetic condition with marks from use.

Model no. MVE510AF-GB

Ref - 11905075

SN - CAB2111410005

Internal dimensions - D91 x W52.5cm

6 x Triangular storage holders sized 22 x 23 x 64cm (Blue spacers inside drawers)

RECERTIFIED ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Integra Cellspin Cell Control Magnetic Stirrer Four-Platform System Lab

ITEM-27676

Integra Cellspin Cell Control Stirrer Four-Platform System

This was removed from a lab where it was surplus to requirements.

The unit has been tested by a service engineer and is in full recertified working order.

This listing consists of:

1 x Integra Cellspin Controller.

4 x Integra Cellspin Platforms.

3 x 186050 2m Control Cables.

1 x 186238 Controller PSU.

This system will allow you to run either 1 or 2 x Platforms at once. Only one controller cable is needed for this setup.

The system includes 2 x spare platforms and 2 x spare control cables. Another controller could be purchased from the distributor to allow for 2 complete 2 platform systems. We can quote for an extra brand-new controller if required.

The platforms have all had brand-new belts fitted and have been rpm-tested through the range.

Note that these platforms require spinner flasks to operate correctly. These can be purchased separately from the distributor. We can also quote for these flasks if required.

£ 1,000.00 (ex. VAT) 1 in stock

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2 Lab

ITEM-29785

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2

This was removed from a university lab where it was surplus to requirements.

At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed.

It is in excellent cosmetic condition with hardly any marks from use.

There are various accessories included.

£ 1,000.00 (ex. VAT) 1 in stock

TMC Optics Active Vibration Isolation Table Model: 63-530

ITEM-49432

TMC Optics Active Vibration Isolation Table Model: 63-530

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with minimal surface rust present.

£ 1,000.00 (ex. VAT) 1 in stock

Eppendorf Concentrator 5301 Centrifuge w/ F 45-48-11 Rotor Lab

ITEM-49440

Eppendorf Concentrator 5301 Centrifuge w/ F 45-48-11 Rotor Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Includes;

Fixed-angle rotor F-45-48-11 Voor 48 x 1,5/2 ml

£ 1,000.00 (ex. VAT) 1 in stock

Binder BD 115 Incubator Lab

ITEM-47350

Binder BD 115 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The lab confirmed the unit was in full working order prior to removal.

£ 1,000.00 (ex. VAT) 1 in stock

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837 Lab

ITEM-47367

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility.

The lab reported it was in good working condition prior to removal

£ 1,000.00 (ex. VAT) 1 in stock

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837

ITEM-47368

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility.

The lab reported it was in good working condition prior to removal

£ 990.00 (ex. VAT) 1 in stock

Anglia Scientific Cryotome Model 0600 Cryostat Lab

ITEM-39085

Anglia Scientific Cryotome Model 0600 Cryostat

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It is in reasonable cosmetic condition with minor marks.

(digital thermometer not included).

Model- 0600

S/N- 9002459

£ 990.00 (ex. VAT) 1 in stock

C.B.S Scientific Optimizer PCR Workstation Lab

ITEM-36000

C.B.S Scientific Optimizer PCR Workstation

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Includes:

-GE fluorescent light

-GE Germicidal lamp

£ 900.00 (ex. VAT) 1 in stock

Polytron PT 10-35 Homogeniser Stirrer with Kinematica PCU 8 S

ITEM-47511

Polytron PT 10-35 Homogeniser Stirrer with Kinematica PCU 8 S

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and appears to be in good working order.

Includes:

Kinematica PCU 8 S control unit
Stand for mounting the homogeniser

Model: PCU 8 S

Serial No.: 990777-2

£ 900.00 (ex. VAT) 1 in stock

Labcaire Model - BH12 Class II Biological Safety Cabinet

ITEM-41421

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements.

The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included.

It is in reasonably good cosmetic condition internally and externally.

Inside dimensions - D63 W120 H70cm

Hours - 1078 1.2

£ 900.00 (ex. VAT) 1 in stock

Tecan Genesis RSP 100/4 Genesis Liquid Handling System w/ 2200 x 1000ul Tips Lab

ITEM-37708

This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed.

Includes the following:

1 x case of 96 Tecan Series Disposable Tips order No. 612 512.1

1 x Gemini Software Manual V3.10

1 x Tecan EVOware Training handbook

1 x Gemini Software Training Course booklet

1 x Genesis RSP Operating Manual

1 x Genesis Instruments Setup and Service Manual V4.1

£ 900.00 (ex. VAT) 1 in stock

LMS Series 2 Model 230A Cooled Incubator, 290 L Lab

ITEM-47521

LMS Series 2 Model 230A Cooled Incubator, 290 L Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 900.00 (ex. VAT) 1 in stock

Jouan IGO150 CELLlife CO2 Laboratory Incubator Lab

ITEM-17203

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation.

It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level.

Internal dimensions 48x58x48cm LWH

£ 900.00 (ex. VAT) 1 in stock

Sartorius Stedim BioSealer Calibration-Holder Kit

ITEM-36474

Sartorius Stedim BioSealer Calibration-Holder Kit

This was removed from a working lab where it was surplus to requirements.

The unit looks to be unused but has been opened.

It is in excellent cosmetic condition with minor marks.

£ 900.00 (ex. VAT) 1 in stock

Labcaire Model SC12R Recirculating Class II Microbiological Safety Cabinet Lab

ITEM-25328

This Labcaire Recirculating Class II Microbiological Safety Cabinet Model SC12R was removed from a university lab where it was surplus to requirements. The unit was last used 3 years ago and the lab are confident it was working when least used.

The unit powers up and both the fan and white light work. There is no UV light fitted.

It is in reasonably good cosmetic condition with some marks from use. The last inspection record recommends that the Pre-Filter is replaced

Inside dimensions - D58 W120 H62cm

£ 850.00 (ex. VAT) 1 in stock

Beckman JS-24 Swinging Bucket Rotor - No Buckets JS-24.38 Lab

ITEM-48442

Beckman JS-24 Swinging Bucket Rotor - No Buckets JS-24.38 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and remains untested.

Please note; This sale is for the rotor only, there are no buckets included.

Platform: Avanti
Rotor Type: Swinging-Bucket (High Performance)
Maximum RPM: 24,000 rpm

£ 850.00 (ex. VAT) 1 in stock

Beckman Coulter SX4250 Swinging Bucket Rotor 4500RPM w/ 4 Buckets Lab

ITEM-47197

Beckman Coulter SX4250 Swinging Bucket Rotor 4500RPM Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition but is untested.

Includes:

4 x Beckman Coulter 392252 SX4250 Centrifuge Rotor Buckets 250mL 4500RPM

Max RPM- 4500

£ 850.00 (ex. VAT) 1 in stock

Miele Mielabor G7733 Glassware Washer Lab

ITEM-41639

Miele Mielabor G7733 GlassWasher Lab

This item was removed from a university where it was surplus to requirements.

It powers on and completes a full wash cycle during testing, but is in poor cosmetic condition.

Please note; The top of the unit has rotted slightly due to its wooden construction, but it is purely cosmetic.

£ 840.00 (ex. VAT) 1 in stock

Sanyo MCO-15AC Lab Incubator Co2 Lab

ITEM-42716

Sanyo MCO-15AC Lab Incubator CO2 Lab

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in complete working order.

Item supplied with three shelves.

It is in good cosmetic condition, however the door handle has been removed, the latch and seal remain in good working order.

£ 810.00 (ex. VAT) 1 in stock

Eppendorf ThermoStat C Dry Block Heater Lab

ITEM-48334

Eppendorf ThermoStat C Dry Block Heater Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The lab confirmed it was in good working order prior to removal.

£ 800.00 (ex. VAT) 1 in stock

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

ITEM-47241

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Included;

6 x Sample Storage Racks.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Hitachi Sorvall Discovery M120 Refrigerated S/R Broken Motor Mount Lab

ITEM-47196

Sorvall Discovery M120 Floor-Standing Refrigerated Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, further testing was not possible due to the motor mount being broken.

Therefore, it is listed as Spares/Repair.

$Image of Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab$

£ 800.00 (ex. VAT) 1 in stock

Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab

ITEM-46195

Oxford Cry Systems Crystal Diffractometer Cryostream Probe

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was not possible to test the functionality at our facility.

Includes:

Single crystal diffractometer cryostream probe

£ 800.00 (ex. VAT) 1 in stock

New Brunswick Scientific Ultra Low Temperature Freezer Model U410 -45

ITEM-41362

New Brunswick Scientific Ultra Low-Temperature Freezer Model-U410 -45

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order to -45˚C. It was tested with a digital thermometer (not included).

It is in great cosmetic condition.

£ 800.00 (ex. VAT) 1 in stock

Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab

ITEM-37244

Beckman GS-6KR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.

Includes:-

Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
4 x Buckets, the cover for one of the baskets is not included.

£ 800.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab

ITEM-47240

GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Included;

6 x Storage Racking.

£ 800.00 (ex. VAT) 1 in stock

Nuaire Laboratory CO2 Incubator Model NU-5500E Lab

ITEM-46363

Nuaire Laboratory Incubator Model NU-5500E Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 800.00 (ex. VAT) 1 in stock

Intavis AG DigestPro MSi Automated Protein Digestion System w/ Consumables

ITEM-48807

Intavis AG DigestPro MSi Automated Protein Digestion System with Dell Optiplex PC and Consumables

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on successfully and is in very good cosmetic condition. The robot communicates correctly with the included PC and responds to manual X, Y, and Z input. Further functional testing has not been performed at our facility.

Includes:

Intavis AG DigestPro MSi Automated Protein Digestion System
Dell Optiplex 380 PC with monitor, keyboard, and mouse
Running Windows XP
Installed Digest 3.0.31 software
Needle box with Allen key
Ducting with connections to the machine
Pack of 25 – 96 Well Reaction Plate
Pack of 100 – Top Cover for Bottle
1x Acrylic plate with 4x tubing connectors
Silicone sealing membrane
Reagent tube kit

£ 800.00 (ex. VAT) 1 in stock

Thermo IEC Centra CL3-R Refrigerated Centrifuge - 4600rpm Lab

ITEM-18032

This Thermo IEC Centra CL3-R Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested. It is in good working order.

It is in reasonably good cosmetic condition with some marks from use.

The unit comes with;

1 x IEC 243 Rotor.

4 x 12-04 Thermo 51138 271.0G Buckets.

2 x Thermo Electron IEC 6562 140.0 GMS 02-06 Adaptors.

2 x Thermo Electron IEC 6566E 156.0G Adaptors.

The 6562 Adaptors have 8 wells that are 17.5mm in diameter and 100mm deep. The 6566E Adaptors have 58.5mm deep tube wells but extend to the top of the adapter making them 99mm deep.

£ 800.00 (ex. VAT) 1 in stock

Jouan SA EB115 Elec Sans Therm Incubator Lab

ITEM-49428

Jouan SA EB115 Elec Sans Therm Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition.

£ 800.00 (ex. VAT) 1 in stock

Carbolite ESF 12/10 Electric Smelting Furnace Lab

ITEM-49692

Carbolite ESF 12/10 Electric Smelting Furnace

This item was removed from a university where it was surplus to requirement.

It is in reasonably good used cosmetic condition and in working order.

This item is fitted with a 3 Pin Single Phase 16amp Blue Plug.

£ 800.00 (ex. VAT) 1 in stock

Set of 7 S+B Wheeled Laboratory Cupboards

ITEM-43100

Set of 7 S+B Wheeled Laboratory Cupboards

These items were removed from a university laboratory where they were surplus to requirements.

All units are in good cosmetic condition with minimal wear from previous use. The wheels are in good condition and move smoothly.

Set Comprises

3 × S+B Large Cupboards

External Dimensions (L × W × H): 104 × 48 × 86 cm
Weight: 65 kg each
Each cupboard has three compartments, with eight shelf slots per compartment (no shelves included).
Internal dimensions of each compartment: 44 × 32 × 71 cm

2 × S+B Medium Cupboards

External Dimensions (L × W × H): 90 × 48 × 85 cm
Weight: 60 kg each
Each unit includes one fitted shelf.
Internal dimensions: 86 × 44 × 71 cm

2 × S+B Small Cupboards

External Dimensions (L × W × H): 75 × 48 × 75 cm
Weight: 50 kg each
Each unit includes one fitted shelf.
Internal dimensions: 71 × 44 × 62 cm

£ 800.00 (ex. VAT) 1 in stock

MAT BioMAT-2 1200EXH Class II Microbiological Safety Cabinet Lab

ITEM-49808

MAT BioMAT-2 1200EXH Class II Microbiological Safety Cabinet Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

ITEM-46523

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably poor cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

ITEM-47673

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs

ITEM-45166

New Brunswick Innova 44R Incubator Broken Shaker Lab

This item was removed from a university lab where it was surplus to requirements.

The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.

The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.

Due to the faulty shaker element, this item is listed as Spares/Repair.

Specifications:

Model: Innova 44R
Condition: Fair, requires repair for shaker motor
Functionality: Incubation temperatures tested and reached correctly

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m

ITEM-42459

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 154 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Audion AudionVac Digital VMS 133 Vacuum Sealing Machine

ITEM-47135

Audion AudionVac Digital VMS 133 Vacuum Sealing Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in working order.

Includes;

User Manual
3 x Marble Platform

£ 750.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP Swinging Bucket Rotor Lab

ITEM-46180

Eppendorf A-2-DWP Swinging Bucket Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we have not tested it at our facility.

Specifiactions;

Capacity: 2 x deep-well plates
Max RPM: 3700
Compatible Models: 5804/5804R/5810/5810R

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m

ITEM-42418

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 149 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

General Laboratory

Filters