General Laboratory

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 4000 Benchtop Orbital Incubator Shaker

ITEM-55028

Thermo Scientific MaxQ 4000 Benchtop Orbital Incubator Shaker

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however, it failed to heat when tested.

Due to the heating fault, this item is listed as spares or repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Max Q 4000 Shaking Incubator Lab

ITEM-50208

Thermo Scientific MaxQ 4000 Shaking Incubator – Spares/Repair

This was removed from a laboratory environment where it was surplus to requirements.

The unit powers on and is in good cosmetic condition with minor marks from use.

Following inspection and basic fault-finding, power is confirmed as reaching the unit and the PSU is functioning correctly.

However, power is not being passed through the control board to the PSU. This indicates a likely fault with the power control board.

The unit is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

PHCBI MIR-554-PE Cooled Incubator Lab

ITEM-55410

PHCBI MIR-554-PE Cooled Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It powers on, however it failed to reach its minimum temperature.

It is therefore listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Buchi Rotavapor R-200 and Buchi Heating Bath B-490

ITEM-52561

Buchi Rotavapor R-200 and Buchi Heating Bath B-490

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

Buchi Rotavapor R-200
Buchi Heating Bath B-490

£ 500.00 (ex. VAT) 1 in stock

Mettler Toledo Coulometer DL32 Titrator Lab

ITEM-52352

Mettler Toledo Coulometer DL32 Titrator Lab

This item was removed from a facility where it was surplus to requirement.

The previous owner stated it was in working order prior to removal.

Please note: The power supply is not included.

£ 500.00 (ex. VAT) 1 in stock

Radiometer Analytical TIM856 Titration Manager Lab

ITEM-52346

Radiometer Analytical TIM856 Titration Manager Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

£ 500.00 (ex. VAT) 1 in stock

Lab Bubble Sample Protection PCR Bubble BUB-PCR-SA-RED w/ Fan Unit

ITEM-55271

Lab Bubble Sample Protection PCR Bubble BUB-PCR-SA-RED w/ Fan Unit

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Statebourne Cryogenics Liquid Nitrogen Refrigerator BM12 Faulty Lab

ITEM-48690

Statebourne Cryogenics Liquid Nitrogen Refrigerator BM12 S/R Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but the lid does not close properly. The previous owner has stated that the unit is not working.

Due to these issues, it is listed for spares or repairs.

Model: BM12 S/R

£ 500.00 (ex. VAT) 1 in stock

Stuart SBS40 Shaking Water Bath Lab

ITEM-50253

Stuart SBS40 Shaking Water Bath Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell AAA091 Floor Standing Autoclave Lab

ITEM-53093

Astell AAA091 Floor Standing Autoclave Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

The previous owner stated it was faulty and is therefore listed as Spares/Repair.

Please note: It does not have a plug fitted.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Floor Standing Centrifuge

ITEM-55754

Beckman Coulter Avanti J-E Floor Standing Centrifuge

This item was removed from a facility where it was surplus to requirements.

The unit powers on. However, during testing the following error appeared: “F1-FRS, Call Service”.

This fault is likely related to a vacuum system error.

Due to the fault noted above, no further testing has been carried out and the item is being sold as spares or repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator

ITEM-47640

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the display screen does not power on.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MSC 1.2 MSC-Advantage Class 2 Biological Safety Cabinet

ITEM-52394

Thermo Scientific MSC 1.2 MSC-Advantage Class 2 Biological Safety Cabinet

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however, the blower only operates when the window is fully closed and does not run in the normal working position.

It is therefore listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Techne TE-10D Tempette Thermoregulator Immersion Circulator

ITEM-53811

Techne TE-10D Tempette Thermoregulator Immersion Circulator

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hermle Z 300 K Centrifuge Lab

ITEM-47684

Hermle Z 300 K Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and shows minimal wear.

However, during testing it failed to reach the set temperature, stabilizing at 25°C, and did not achieve the rotor’s maximum speed of 5000 RPM, reaching only 4000 RPM.

Therefore, it is listed as spares/repair.

Model: Z 300 K

Serial No.: 55060105

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Exhaust Air Plenum DD Unit (New)

ITEM-52416

Thermo Scientific Exhaust Air Plenum DD Unit (New)

This item was removed from a university where it was surplus to requirement.

It is new its original packaging.

Includes;

Metal Vent Ring
Silicone Caulk

£ 500.00 (ex. VAT) 1 in stock

Inoxcva Cryoseal IN50 Liquid Nitrogen Cryogenic Container/Dewar/Tank W/ t

ITEM-56061

Inoxcva Cryoseal IN50 Liquid Nitrogen Cryogenic Container/Dewar/Tank W/ t

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leica Cryocut 1800 Reichert-Jung CM1800 Lab

ITEM-37479

Leica Cryocut 1800 Reichert-Jung CM1800 Microtome Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good mechanical order, however it failed the PAT on insulation.

Therefore, further testing could not be conducted and it is listed as Spares/Repair.

Specifications:

Cat No. 042019409
Serial No. 25320449

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific SORVALL RC 6+ Centrifuge

ITEM-49704

Thermo Scientific SORVALL RC 6+ Centrifuge

This item was removed from a facility where it was surplus to requirement.

The unit powers on and was able to cool down to 4°C during testing; however, a noticeable electrical burning smell developed during operation.

The start capacitor became excessively warm and there appears to be an issue relating to the cooling system circuitry, possibly involving a faulty relay or capacitor control fault.

Due to these faults, the unit is being sold for spares or repair.

£ 500.00 (ex. VAT) 1 in stock

ALC PK110 Benchtop Centrifuge w/ ALC O-G26 Rotor 4000rpm Lab

ITEM-51449

ALC PK110 Benchtop Centrifuge w/ ALC O-G26 Rotor 4000rpm Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 6/24

£ 500.00 (ex. VAT) 1 in stock

Moffat Blue Seal Turbofan E23M3 Oven

ITEM-50970

Moffat Blue Seal Turbofan E23M3 Oven

This item was removed from a facility where it was surplus to requirement.

The oven powers on and successfully reached its maximum rated temperature of 250°C during testing.

Please note that the unit produces noise consistent with worn motor bearings. The bearings may require replacement, or the motor assembly may need attention.

For this reason, we recommend that the oven is serviced prior to use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional G 7881 Glassware Washer

ITEM-55615

Miele Professional G 7881 Glassware Washer

This item was removed from a facility where it was surplus to requirement.

The unit is able to complete a rinse cycle and drain correctly, however, heated programs trigger an F26 Boiler Protection Error.

Due to this fault, the unit is being sold for spares or repair.

£ 500.00 (ex. VAT) 1 in stock

Sigma Fixed-Angle Rotor Nr. 12158 26200rpm

ITEM-52729

Sigma Fixed-Angle Rotor Nr. 12158 26200rpm

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Includes stand.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model MCO 96 Lab

ITEM-54729

Sanyo CO2 Incubator Model MCO 96 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

ITEM-37793

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The item details are as follows:

Model LPN3/2051

Serial No. 1616

Manufactured 30.06.16

Output 2051 KW/hr 7.0 MBtu/hr

Dungs gas train valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter

Caldaia A Condensazione control box with probes and a programmable thermostat to control the boiler at lower temperatures.

With Autoflame Combustion Management System

Part Nos. MM10005, MM10004 Serial Nos. 21549, 53299

TEC 5.5KW 415 volt fan motor Type 5.523TECAB35-IE3 T3A 13251-2

2.5" gas inlet pipe

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Bright Instrument SC12CL 5030 Microtome Cryostat

ITEM-48821

Bright Instrument SC12CL 5030 Microtome Cryostat – Spares/Repair

This item was removed from a university where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however, during temperature testing the system did not begin cooling.

Therefore, it is listed as Spares/Repair.

Model: SC12CL 5030

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific G-24 Environmental Incubator Shaker

ITEM-52626

New Brunswick Scientific G-24 Environmental Incubator Shaker

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: A faint high-pitched knocking noise was noted during operation, although the platform remained relatively stable, additionally the temperature controller display fluctuated slightly during testing.

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Mobile Centrifuge Table Model 5821

ITEM-51293

Eppendorf Mobile Centrifuge Table Model 5821

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition.

Dimensions;

External length (cm) 70
External width (cm) 64
External height (cm) 47

It is compatible with following centrifuge:

5810, 5810R, 5804 & 5804 R

£ 500.00 (ex. VAT) 1 in stock

Genevac Technologies Table Lx130 Wx70 Hx82 cm Lab

ITEM-48653

Genevac Technologies Table (Lx130 x Wx70 x Hx82 cm)

This item was removed from a facility where it was surplus to requirements.

It was previously used with a Genevac VC3000TA and Genevac HT-8 system, with a vacuum pump mounted underneath.

The table remains in relatively good condition overall, with some areas of surface rust present.

£ 500.00 (ex. VAT) 1 in stock

Scanbur Warming Cabinet Type-48-VS-III Lab

ITEM-44883

Scanbur Warming Cabinet Type-48-VS-III Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, other than tape holding on a damaged alarm light cover.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Genevac VC3000TA Vapour Condenser Lab

ITEM-48656

Genevac VC3000TA Vapour Condenser Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, but was unable to be tested as it requires connection to a Genevac Centrifugal Evaporator. (Not included)

Additionally, the previous owner notified us that it was faulty, although the fault was not diagnosed,

It is therefore listed as Spares/Repair

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MTI Corporation Hot Sealing Machine

ITEM-50824

MTI Corporation Hot Sealing Machine

This item has been removed from a facility as part of a surplus clearance.

The powers on, however, it is currently non-functional due to a pneumatic/sealing fault.

Due to this issue, the unit is being sold as spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L5-50B Ultracentrifuge Lab

ITEM-51430

Beckman L5-50B Ultracentrifuge Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however, it displays a balance error which prevents any further testing from being carried out.

It is therefore being sold for Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-6 Plus Floor Standing Centrifuge Lab

ITEM-52688

Sorvall RC-6 Plus Floor Standing Centrifuge

This item was removed from a facility where it was surplus to requirement.

The unit powers on but displays alarm “E38”. The onboard information menu advises that alarms E10–E95 are intended for service personnel, therefore no further fault information could be obtained.

Please note that the centrifuge arrived with several internal connections unplugged.

Due to this fault, the unit could not be fully tested and is therefore being sold for spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Savant MICROMODULYO Freeze Dryer

ITEM-50209

Thermo Savant MICROMODULYO Freeze Dryer

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however, the temperature switch indicator never illuminated, even after approximately 2 hours of operation.

The system also failed to achieve its maximum cooling temperature during testing.

Due to these faults, the unit is being sold for spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Benchtop Refrigerated Centrifuge w/ Eppendorf A-44-4 Rotor Lab

ITEM-42840

Eppendorf 5804 R Benchtop Refrigerated Centrifuge with Eppendorf A-44-4 Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, however during testing the following error was noted - 'Error 3' likely caused by a faulty speed sensor or frequency converter.

It is therefore listed as Spares/Repair.

Includes:

Eppendorf A-44-4 rotor (max speed 5000 rpm)
4 Eppendorf swinging buckets with tube adaptors (tube size 2.8 cm diameter x 7.5 cm depth)

Specifications:

Max speed: 14,000 rpm
Temperature range: -9 to 40˚C

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Revco UXF Ultra Low Temperature Freezer

ITEM-52383

Thermo Scientific Revco UXF Ultra Low Temperature Freezer Spares/Repair

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however it powers down and restarts after approximately 3–5 minutes.

Additionally, on start-up, an error message is displayed: “Failed to connect to SD Card.”

No further testing has been carried out due to the fault described above. As such, the unit is offered as spares/repair.

Model: Revco UXF

Model No: UXF60086V

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Microliter 48 x 2 mL Sealed Aluminum Fixed Angle Rotor

ITEM-54954

Thermo Scientific Microliter 48 x 2 mL Sealed Aluminum Fixed Angle Rotor

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab

ITEM-47421

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge displays an E33 error, indicating a fault with the main board. The working condition of the remaining parts is unknown:

2 x Lid locks (at least one reported to have an issue)
1 x Motor
1 x Compressor
1 x Display board
1 x Temperature sensor

Due to the issues stated above, this centrifuge is listed as Spares/Repair.

Please note: There is no rotor included.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-162 Lab Incubator

ITEM-56217

Sanyo MIR-162 Lab Incubator

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Electron Corporation NESLAB Merlin M33 Recirculating Chiller S/R

ITEM-49854

Thermo Electron NESLAB Merlin M33 Recirculating Chiller – Spares/Repair

This item was removed from a facility where it was surplus to requirements.

It is in poor cosmetic condition with areas of surface rust throughout. The cooling fluid has been drained; however, algae and particulate material are present inside the reservoir.

The unit was briefly tested but did not operate, so it is listed as Spares/Repair.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU.437.400E Biological Safety Cabinet Lab

ITEM-50586

Nuaire NU.437.400E Biological Safety Cabinet Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and in complete working order. (Socket tester not included.)

External Size (HxWxD) 1524 × 1362 × 841 mm
Internal Work Area (HxWxD) 724 × 1178 × 597 mm
Weight 227 kg (500 lb)

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Vacutech Cryo Arm Lab

ITEM-45169

Vacutech Cryo Arm Lab

This item was removed from a university lab where it was surplus to requirement.

It is in excellent condition, we are told it is brand new.

£ 500.00 (ex. VAT) 1 in stock

Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab

ITEM-37244

Beckman GS-6KR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.

Includes:-

Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
4 x Buckets, the cover for one of the baskets is not included.

£ 500.00 (ex. VAT) 1 in stock

Sartorius Certomat BS-1 Incubator Shaker 8865124 Lab

ITEM-35713

Sartorius Certomat BS-1 Incubator Shaker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected.

The shaker is in good working order.

The system is in good cosmetic condition with minor marks..

This is the heating only model. It will not refrigerate.

£ 500.00 (ex. VAT) 1 in stock

Neslab Cryocool CC-100 II Immersion Cooler Lab

ITEM-35994

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 500.00 (ex. VAT) 1 in stock

Neslab Cryocool Immersion Cooler CC-100 II Lab

ITEM-35995

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 500.00 (ex. VAT) 1 in stock

Baker Hypoxycool Culture Media Hypoxia Conditioner Lab

ITEM-37960

Baker Hypoxycool Culture Media Hypoxia Conditioner

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility.

Internal dimensions 38 x 38 x 30cm (LxWxH)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hitachi Sorvall Discovery M120 Refrigerated S/R Broken Motor Mount Lab

ITEM-47196

Sorvall Discovery M120 Floor-Standing Refrigerated Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, further testing was not possible due to the motor mount being broken.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

LabCaire TC 1200 Class II Safety Cabinet Lab

ITEM-41594

LabCaire TC 1200 Class II Safety Cabinet Lab

This was removed from a laboratory where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. (Socket tester not included)

I