General Laboratory

£ 1,000.00 (ex. VAT) 1 in stock

Oaken Commercial Incubator & Hatcher Lab

ITEM-37224

Oaken Commercial Incubator & Hatcher

This item was removed from a university lab where it was surplus to requirements.

The incubator powers on, with the internal light and fan in working order.

The unit is in reasonable cosmetic condition and in working order (thermometer not included).

Includes:

12 x Egg Trays (Dimensions: 50 x 36 cm, each holding up to 88 eggs)

£ 1,000.00 (ex. VAT) 1 in stock

Kryo 560-16 Planer Controlled Rate Freezer Lab

ITEM-37138

Kryo 560-16 Planer Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

1x Kryo 560-16 Planer:

Model. K10/16

Powers on
Interior is in excellent condition.

£ 1,000.00 (ex. VAT) 1 in stock

Planer Kryo 10 Series ii, MVE Lab 30, Controlled Rate Freezer System Lab

ITEM-35705

Planer Kryo 10 Series ii, MVE Lab 30, Controlled Rate Freezer System Lab

This system was removed from a university where it was surplus to requirement.

All units are in reasonably good cosmetic condition.

The Planer Kyro 10 Series ii Freezer & Planer Kyro 10 Series ii Biomed MR2 Printer both power on and pair successfully. The printer requires a Passcode which is available on request.

We were unable to test the Planer LNP 4-C Freezer & Power Supply as the power supply cable is not included, therefore we are unable to confirm its working order.

Also included are the following:

2 x washers for Paner Freezer

Serial#: 24 707

2 x Spare paper for Planer Freezer

Trolley stand with wheels

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card Lab Spares/Repairs

ITEM-35094

Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with its cycle timer. It is sold for spares/repairs.

£ 1,000.00 (ex. VAT) 1 in stock

Thermo Scientific Haake A28 Water Bath Lab

ITEM-34892

Thermo Scientific Haake A28 Chiller Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and holds water with no leak, however, as there is no controller included so we are unable to conduct further testing.

£ 1,000.00 (ex. VAT) 1 in stock

PALL ICELLIS Nano Perfusion Module Lab

ITEM-34860

PALL ICELLIS Nano Perfusion Module

This was removed from a university lab where it was surplus to requirements.

We do not have the correct PSU so it has not been tested.

It is in good cosmetic conditon with minor marks.

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter FX6100 Fixed Angle Rotor 10200RPM Lab

ITEM-34801

This Beckman Coulter FX6100 Fixed Angle Rotor 10200RPM was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use but has not been tested.

For use in Allegra X-12 series centrifuges.

For 1000ml tubes.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs

ITEM-34798

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-HC Centrifuge Lab Spares/Repairs

ITEM-31551

Beckman Coulter Avanti J-HC Centrifuge

This item was removed from a university lab where it was surplus to requirements.

The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted.

The spindle is bent.

Therefore, it is listed as Spares/Repair.

£ 1,000.00 (ex. VAT) 1 in stock

MAT BioMAT 2 Microbiological Safety Cabinet Class 2 II Lab

ITEM-31179

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet

This was removed from a university lab where it was surplus to requirements.

The item powers on with airflow and both UV and white lights working.

It is in good cosmetic condition with some marks from use.

Cabinet Dimensions - L120 W63 141cm

Frame Dimensions - L112 W60 H84cm

Internal workspace dimensions - D54 W106 H70cm

£ 1,000.00 (ex. VAT) 1 in stock

Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 Lab

ITEM-28195

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 was removed from a university lab where it was surplus to requirements.

The item powers on with blowers and both Light & UV working.

The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height.

The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway.

The lab reported that the filter has been removed.

Inside dimensions - D57.5 W118 H72cm

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Centrifuge Model - J2-21 Spares/Repairs

ITEM-26290

This Beckman Centrifuge Model - JS-21 Cat no. 341737 was removed from a university lab where it was surplus to requirements.

The unit powers up but has a fault with the shaft and bearings.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Priorclave Autoclave Type - PS/MUA/C60 Lab Spares/Repairs

ITEM-25293

Priorclave Autoclave Type - PS/MUA/C60 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however it is not in working condition and is listed as Spares/Repair. It has a board/display fault.

Image of Priorclave Tactrol 2 PS/QCS/EH150 Laboratory Autoclave Lab Spares/Repairs

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Priorclave Tactrol 2 PS/QCS/EH150 Laboratory Autoclave Lab Spares/Repairs

ITEM-23949

This Priorclave PS/QCS/EH150 Laboratory Autoclave was removed from a university lab where it was surplus to requirements.

The unit has been stripped for parts. Useful parts remaining are 2 x output boards, power supply and heaters.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Priorclave EV100 Top-Loader Autoclave Lab Spares/Repairs

ITEM-21246

This was removed from a university lab where it was surplus to requirements.

The system has a main board fault. It does not heat up as a result.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave W/ Silent Master Lab Faulty

ITEM-08317

This Tuttnauer Autoclave 5050ELV-D Steriliser W/ Silent Master Air Compressor was removed from a university lab where it was surplus to requirements.

The unit powers up but is sold for spares/repairs as it has a heater fault.

I

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Tuttnauer Vertical Laboratory Autoclave 5050ELV D Steriliser Lab 110L Faulty

ITEM-04932

This Tuttnauer Autoclave 5050ELV-D Steriliser was removed from a university lab where it was surplus to requirements.

The system has been stripped for parts and is sold for spares/repairs.

£ 1,000.00 (ex. VAT) 1 in stock

PTI F10S-6x500 10,000RPM Rotor Lab

ITEM-45557

PTI F10S-6x500 10,000RPM Rotor Lab

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in good cosmetic condition but has not been tested further.

Specifications:

Rotor Speed: 10,000 RPM
Capacity: 6 x 500 ml test tube holders
Serial No.: 60628

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter SW 55 Ti 55,000RPM Rotor Lab

ITEM-45559

Beckman Coulter SW 55 Ti Rotor

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in good cosmetic condition and is designed for a maximum speed of 55,000 RPM.

Specifications:

Max RPM: 55,000
Serial No.: 14E 0512

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Sartorius Certomat BS-1 Double Stack Shaking Incubator Lab Spares/Repairs

ITEM-45555

Sartorius Certomat BS-1 Double Stack Shaking Incubator

This item was removed from a university laboratory where it was surplus to requirements.

Both incubator units are in good used cosmetic condition and power on, but each has functional issues:

Top Unit: Heats up as expected but does not shake.
Bottom Unit: Powers up but displays an error message in German on startup and continuously loops the startup sequence.

Efforts to troubleshoot both units were unsuccessful, and therefore are sold as Spares/Repair.

£ 990.00 (ex. VAT) 1 in stock

Anglia Scientific Cryotome Model 0600 Cryostat Lab

ITEM-39085

Anglia Scientific Cryotome Model 0600 Cryostat

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It is in reasonable cosmetic condition with minor marks.

(digital thermometer not included).

Model- 0600

S/N- 9002459

£ 990.00 (ex. VAT) 1 in stock

C.B.S Scientific Optimizer PCR Workstation Lab

ITEM-36000

C.B.S Scientific Optimizer PCR Workstation

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Includes:

-GE fluorescent light

-GE Germicidal lamp

£ 990.00 (ex. VAT) 1 in stock

Piramoon Technologies F15-6x100 FiberLite 15,000rpm 24,700g Centrifuge Rotor Lab

ITEM-35716

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor

This was removed from a university lab where it was surplus to requirements.

The item is in very good cosmetic condition and also includes its original carry case.

Items features are as follows:

15000rpm

24,700 X G

6x 100ml tube holders

Quick release autolock

SPARES/REPAIR ITEM

£ 990.00 (ex. VAT) 1 in stock

PEAK Scientific PH600 Precision Hydrogen Generator Lab

ITEM-34765

PEAK Scientific PH600 Precision Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs due to the nature of the instrument and that it is untested.

SPARES/REPAIR ITEM

£ 985.00 (ex. VAT) 1 in stock

Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

ITEM-39716

Lab Companion IS-971R Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.

It is in good cosmetic condition with minor marks

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 980.00 (ex. VAT) 1 in stock

PEAK Scientific Hydrogen Generator PH600

ITEM-34766

PEAK Scientific PH600 Precision Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs due to the nature of the instrument and that it is untested.

RECERTIFIED ITEM

£ 975.00 (ex. VAT) 1 in stock

Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB Lab

ITEM-28101

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a university lab where it was surplus to requirements.

The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it.

The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed.

It is in excellent cosmetic condition with some minor marks from use.

4 Shelves - 49.5 x 49.5cm

Internal dimensions - D52 W50 H55cm

£ 965.00 (ex. VAT) 1 in stock

Julabo SE High Tech Heating Circulator Water Bath Lab

ITEM-38834

Julabo SE High Tech Heating Circulator Water Bath

This was removed from a university lab where it was surplus to requirements.

The unit is in good working order but is missing the plug for the drain, which will need to be replaced before it can be used. We rerouted the water with a hose for testing.

It is in good cosmetic condition with minor marks.

£ 960.00 (ex. VAT) 1 in stock

Lot of Thermo Scientific Rotor Bucket Adapters & Lids TX-750 T-25 T-75 Lab

ITEM-38715

Lot of Thermo Scientific Rotor Bucket Adapters & Lids

All items look to be new and unused, but a lot of the packaging has been opened so we cannot confirm this. We removed the packaging for the photos.

Included are the following:

Thermo Scientific TX-750 Round Bucket Adapters x 2

Part#: 75003638

Thermo Scientific Adapters for T-25 Nunc Easy Flask x 2

Part#: 75008384

Thermo Scientific Adapters for T-75 Nunc Easy Flask x 2

Part#: 75008383

Thermo Scientific Centrifuge Rotor Bucket Adapters 21x15mL x 4

Part#: 75003719

Thermo Scientific TX-750 Swinging Bucket Rotor Lid x 2

Part#: 75003609

Thermo Scientific Carriers for microplates and T-75 Flasks for TX-750 rotor x 4

Part#: 75003617

£ 960.00 (ex. VAT) 1 in stock

Jun-Air 2000-40MD2 Silent Air Laboratory Compressor Lab

ITEM-36663

This Jun-Air 2000-40MD2 Compressor was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. The item is in a reasonable, used cosmetic condition. There is some damage in the top right of the unit.

Hours - 11134 71

£ 960.00 (ex. VAT) 1 in stock

BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station Lab

ITEM-34875

BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

ITEM-39911

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The system is faulty and requires a new controller.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs.

£ 950.00 (ex. VAT) 1 in stock

BECKMAN Model J2-21 Floor Standing Centrifuge Lab

ITEM-21249

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order but is not supplied with a rotor.

It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

Astell ASB270BT16963 Autoclave Front Loading Floor Standing Autoclave Lab Faulty

ITEM-20660

Astell ASB270BT16963 Autoclave Front Loading Floor Standing Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit does power up, but the lab reported that it had a vacuum fault. It has not been tested at our facility. It requires a 5 Pin 32amp plug.

It is in reasonably good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

Medline Scientific Incubated Shaker Model - IS-971RF Spares/Repairs

ITEM-20411

This Medline Scientific Incubated Shaker Model - IS-971RF was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It was set to 37˚C but only reached 31˚C. The display would keep reverting to 22.2˚C as well. There was a note from the lab stating that it had some heating issues.

Inside dimensions - L89.5 x W63 x D48cm

Platform size - 46 x 76cm

The shaker speed ran up to 160rpm. We tried setting it to the max of 300 but it wouldn't run at that.

Cosmetically it is in a reasonable used condition but all the light tubes work bar one.

It is sold for spares/repairs due to the fault.

£ 940.00 (ex. VAT) 1 in stock

Dako Autostainer Plus Automated Slide Stainer Processing/Staining System Lab

ITEM-23478

This Dako Autostainer Plus Automated Slide Processing/Staining System was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The lab did report it to be in good working order but it has not been tested further than power-up at our site.

Accessories included;

1x PT link Monitor Software CD 16-20088

1x PT link Monitor Software CD PT11330

1x Powervar CD e Library SM- 520 Rev. B

3x Sets of PT Link Quick Guides

3x User guides

1x Autostrainer plus User guide

2x 20ml diameter Tube stands

1x set of safety instructions

1x 3Mtr DB9M to DB9F Extension cable

2x 6.3ml tubing black/clear

3x 10ltr Nalgene Bottles

£ 925.00 (ex. VAT) 1 in stock

Labcaire Model - BH12 Class II Biological Safety Cabinet Lab

ITEM-25327

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working.

The unit powers up and both the fans and the white lights are working. There is no UV light fitted.

It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit.

Inside dimensions - D62.5 W120 H70cm

Hours - 14001.4

£ 920.00 (ex. VAT) 1 in stock

Leica Reichert Ultracut E Microtome System Type - 701704 Lab

ITEM-27392

This Leica Reichert Ultracut E Microtome System was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition. The Ultracut takes power from the control unit. The lights work and everything moves well.

Included are;

Leica Reichert Ultracut E Microtome

Type - 701704

Head - Reichert Stereo Star Zoom

0.7X to 4.2X 570

2 x Eye pieces - 15X W.F 184

£ 910.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks

6 Baskets/Drawers - 51 x 50 x 15cm

Image of Gallenkamp Laboratory Shaking Incubator Cat no. I0C400.XX2.C Lab Faulty

SPARES/REPAIR ITEM

£ 900.00 (ex. VAT) No longer available

Gallenkamp Laboratory Shaking Incubator Cat no. I0C400.XX2.C Lab Faulty

ITEM-19848

This Gallenkamp Laboratory Shaking Incubator Cat no. I0C400.XX2.C was removed from a university lab where it was surplus to requirements.

The unit powers up but is showing "er1". It was reported that the digital screen is working but the incubator can't increase/hold the temperature and the shaking rotor (RMP) is also not working.

It is in reasonably good cosmetic condition with marks and stains from general use.

Internal dimensions - 53.5 x 83cm - Depth - 43cm

Shaker Platform - 69 x 49cm

£ 900.00 (ex. VAT) 1 in stock

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab

ITEM-44705

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

£ 900.00 (ex. VAT) 1 in stock

Labcaire Model - BH12 Class II Biological Safety Cabinet

ITEM-41421

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements.

The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included.

It is in reasonably good cosmetic condition internally and externally.

Inside dimensions - D63 W120 H70cm

Hours - 1078 1.2

£ 900.00 (ex. VAT) 1 in stock

Tecan Genesis RSP 100/4 Genesis Liquid Handling System w/ 2200 x 1000ul Tips Lab

ITEM-37708

This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed.

Includes the following:

1 x case of 96 Tecan Series Disposable Tips order No. 612 512.1

1 x Gemini Software Manual V3.10

1 x Tecan EVOware Training handbook

1 x Gemini Software Training Course booklet

1 x Genesis RSP Operating Manual

1 x Genesis Instruments Setup and Service Manual V4.1

SPARES/REPAIR ITEM

£ 900.00 (ex. VAT) 1 in stock

Beckman Refrigerated Centrifuge Spares/Repairs Lab

ITEM-37628

Beckman L7-65 Refrigerated Centrifuge L7-65R

This was removed from a university lab where it was surplus to requirements.

The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds.

For this reason it is sold for spares/repairs.

£ 900.00 (ex. VAT) 1 in stock

Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor

ITEM-35614

Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

Maximum capacity- 6x1000ml

Max RPM- 4200

Includes:

X18 Beckman 4x50ml tube slots (345371)

X14 Beckman 14x15ml tube slots (339180)

X3 1000ml buckets 1066g (368575)

X3 1000ml buckets 1067g (368575)

Model number- JS-4.2

Serial number- 07U2791

£ 900.00 (ex. VAT) 1 in stock

Beckman Avanti 30 Compact Centrifuge with F0850 Rotor & Manual

ITEM-17362

Beckman Avanti 30 Compact Centrifuge with F0850 Rotor & Manual

This item was removed from a university lab where it was surplus to requirements.

It is in good clean condition with minor marks around the display screen. The centrifuge powers on, with screen and controls functioning correctly.

Temperature and RPM settings are operational, and are in good working order (thermometer not included).

Specifications:

RPM Range: 0-30,000 RPM (max RPM with F0850 Rotor fitted: 16,500)\
Time Range: 0-9 hours 59 minutes
Temperature Range: -20°C to 40°C

Includes:

Beckman F0850 Rotor
Capacity: 8 x 50 ml
Max RPM: 16,500
Rotor removal tool
Beckman Avanti 30 Compact Centrifuge Instruction Manual
Beckman Instructions for using F0850 fixed-angle rotor

£ 895.00 (ex. VAT) 1 in stock

Genlab SP/LCI/320/SS/DIG Laboratory Incubator Lab

ITEM-38909

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks, including a dent in the back panel.

6 Shelves - 51 x 50cm

£ 895.00 (ex. VAT) 1 in stock

Wheaton 2-Tier Modular Roller Apparatus Cat No 348970CE Lab

ITEM-38695

Wheaton Modular Roller Apparatus Cat No 348970CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. The speed adjustment knob is missing, but still works.

Item has 2 tiers & 12 rollers.

Roller Area x 2: 52cm x 67cm.

£ 895.00 (ex. VAT) 1 in stock

Calipur Life Sciences TurboVap II Evaporation Concentration Water Bath Lab

ITEM-24409

This was removed from a university lab where it was surplus to requirements.

The water bath module is in working order, but we have not tested the air inlet at our facility.

It is in good cosmetic condition with minor marks from use.

PN - 103193/1

General Laboratory

Filters