Our General Laboratory category offers a wide selection of high-quality, second-hand equipment designed to meet the diverse needs of laboratories. Specializing in essential lab tools such as balances, incubators, hot plates, and centrifuges, our range is ideal for research, educational, and industrial facilities.


Equipment undergoes varying levels of testing, including functionality checks, as well as temperature and CO2 performance assessments, ensuring reliable solutions for your laboratory’s daily operations and environmental control needs.

Items 701 to 750 of 1411

Image of Newport Anti-Vibration Isolation Table Top Metric

£ 500.00 (ex. VAT) 1 in stock

Newport Anti-Vibration Isolation Table Top Metric

ITEM-54910

Newport Anti-Vibration Isolation Table Top Metric


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition.

Image of PHCBI MIR-554-PE Cooled Incubator Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

PHCBI MIR-554-PE Cooled Incubator Lab

ITEM-55410

PHCBI MIR-554-PE Cooled Incubator Lab


This item was removed from a facility where it was surplus to requirement.


It powers on, however it failed to reach its minimum temperature.


It is therefore listed as Spares/Repair.

Image of Liebherr Premium GSS 3626-25 Freezer

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Liebherr Premium GSS 3626-25 Freezer

ITEM-55655

Liebherr Premium GSS 3626-25 Freezer


This item was removed from a facility where it was surplus to requirements.


The freezer is in good working order and is in used cosmetic condition with signs of prior use.


Please note: the door handle has snapped off completely. However, the door still opens, closes, and seals correctly.


The unit is supplied with 8 drawers. The rear of one drawer is broken/cracked in two places.

Image of Moffat Blue Seal Turbofan E23M3 Oven

£ 500.00 (ex. VAT) 1 in stock

Moffat Blue Seal Turbofan E23M3 Oven

ITEM-50970

Moffat Blue Seal Turbofan E23M3 Oven


This item was removed from a facility where it was surplus to requirement.


The oven powers on and successfully reached its maximum rated temperature of 250°C during testing.


Please note that the unit produces noise consistent with worn motor bearings. The bearings may require replacement, or the motor assembly may need attention.


For this reason, we recommend that the oven is serviced prior to use.

Image of Mettler Toledo Coulometer DL32 Titrator Lab

£ 500.00 (ex. VAT) 1 in stock

Mettler Toledo Coulometer DL32 Titrator Lab

ITEM-52352

Mettler Toledo Coulometer DL32 Titrator Lab


This item was removed from a facility where it was surplus to requirement.


The previous owner stated it was in working order prior to removal.


Please note: The power supply is not included.

Image of Radiometer Analytical TIM856 Titration Manager Lab

£ 500.00 (ex. VAT) 1 in stock

Radiometer Analytical TIM856 Titration Manager Lab

ITEM-52346

Radiometer Analytical TIM856 Titration Manager Lab


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


The previous owner stated it was in working order prior to removal.

Image of Liebherr Mediline LGex 3410 Laboratory Freezer

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Liebherr Mediline LGex 3410 Laboratory Freezer

ITEM-55578

Liebherr Mediline LGex 3410 Laboratory Freezer


This item was removed from a facility where it was surplus to requirement.


It is in good working order.


Image of Miele Professional G 7881 Glassware Washer

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional G 7881 Glassware Washer

ITEM-55615

Miele Professional G 7881 Glassware Washer


This item was removed from a facility where it was surplus to requirement.


The unit is able to complete a rinse cycle and drain correctly, however, heated programs trigger an F26 Boiler Protection Error.


Due to this fault, the unit is being sold for spares or repair.

Image of Lab Bubble Sample Protection PCR Bubble BUB-PCR-SA-RED w/ Fan Unit

£ 500.00 (ex. VAT) 1 in stock

Lab Bubble Sample Protection PCR Bubble BUB-PCR-SA-RED w/ Fan Unit

ITEM-55271

Lab Bubble Sample Protection PCR Bubble BUB-PCR-SA-RED w/ Fan Unit


This item was removed from a facility where it was surplus to requirement.


It is in good working order.


Image of Sigma Fixed-Angle Rotor Nr. 12158 26200rpm

£ 500.00 (ex. VAT) 1 in stock

Sigma Fixed-Angle Rotor Nr. 12158 26200rpm

ITEM-52729

Sigma Fixed-Angle Rotor Nr. 12158 26200rpm


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition and remains untested.


Includes stand.

Image of Oxford Cryosystems Cryodrive 2.0 Helium Compressor Model - 972B000A

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Oxford Cryosystems Cryodrive 2.0 Helium Compressor Model - 972B000A

ITEM-54084

Oxford Cryosystems Cryodrive 2.0 Helium Compressor (Model 972B000A)


This item has been removed from a facility as part of a surplus clearance.


The unit briefly powers on, with the green power light illuminating; however, no further activity is observed and the system is unable to initialise.


Due to this fault, the unit is being sold as Spares/Repair.

Image of Anti-Vibration Isolation Table

£ 500.00 (ex. VAT) 1 in stock

Anti-Vibration Isolation Table

ITEM-55829

Anti-Vibration Isolation Table


This item was removed from a facility where it was surplus to requirements.


The table is in used condition, with some pitting/corrosion to the tabletop. This does not appear to impact use.

Image of Sanyo CO2 Incubator Model MCO 96 Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model MCO 96 Lab

ITEM-54729

Sanyo CO2 Incubator Model MCO 96 Lab


This item was removed from a facility where it was surplus to requirement.


It is in good working order.


Image of Ion Bench Laboratory Bench  135x120x60 LxWxH cm Lab

£ 500.00 (ex. VAT) 1 in stock

Ion Bench Laboratory Bench 135x120x60 LxWxH cm Lab

ITEM-50610

Ion Bench Laboratory Bench 135x120x60 LxWxH cm Lab


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.


Weight: 120kg

Dimensions: Lx134 Wx120 Hx60 cm

Image of Limpsfield LPN3/2051 Gas Burner 2051 KW/hr (7.0MBtu/hr)

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Gas Burner 2051 KW/hr (7.0MBtu/hr)

ITEM-37791

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and in good working order.


The item details are as follows:


Model LPN3/2051

Serial No.01336

Manufactured 18.09.15

Output 2051 KW/hr 7.0 MBtu/hr

Dungs Control System


With Autoflame Combustion Management System

Part Nos. MM10005, MM10004 Serial Nos. 20066, 52511


WEG W22 7.5hp 415 volt fan motor



2.5" gas inlet pipe

Image of Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

ITEM-37790

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and in good working order.


The item details are as follows:


Model LPN3/2051

Serial No. 1561

Manufactured 24.02.17

Output 2051 KW/hr 7.0 MBtu/hr

Dungs Control System


With Autoflame Combustion Management System

Part Nos. MM10005, MM10004 Serial Nos. 21267, 52981


WEG W22 7.5hp 415 volt fan motor

Image of Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

ITEM-37793

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and in good working order.


The item details are as follows:


Model LPN3/2051

Serial No. 1616

Manufactured 30.06.16

Output 2051 KW/hr 7.0 MBtu/hr


Dungs gas train valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter


Caldaia A Condensazione control box with probes and a programmable thermostat to control the boiler at lower temperatures.


With Autoflame Combustion Management System

Part Nos. MM10005, MM10004 Serial Nos. 21549, 53299


TEC 5.5KW 415 volt fan motor Type 5.523TECAB35-IE3 T3A 13251-2



2.5" gas inlet pipe

Image of Bright Instrument SC12CL 5030 Microtome Cryostat

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Bright Instrument SC12CL 5030 Microtome Cryostat

ITEM-48821

Bright Instrument SC12CL 5030 Microtome Cryostat – Spares/Repair


This item was removed from a university where it was surplus to requirements.


The unit is in good cosmetic condition and powers on, however, during temperature testing the system did not begin cooling.


Therefore, it is listed as Spares/Repair.


Model: SC12CL 5030

Image of Liebherr Mediline LKexv 3910 Laboratory Refrigerator

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Liebherr Mediline LKexv 3910 Laboratory Refrigerator

ITEM-51298

Liebherr Mediline LKexv 3910 Laboratory Refrigerator


This item was removed from a facility where it was surplus to requirement.


It is in good working order.


Image of Thermo Scientific Versette Automated Liquid Handler Lab

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Versette Automated Liquid Handler Lab

ITEM-38433

Thermo Scientific Versette Automated Liquid Handler


This item was removed from a university where it was surplus to requirement.


It is in reasonably good cosmetic condition, with 2 noticeable cracks present.


This item powers on, we are unable to conduct further testing at our facility.


This item was last serviced by a Thermo Scientific Engineer in April 2022.

Image of Redd & Whyte Preddator Liquid Handling Robot System Lab

£ 500.00 (ex. VAT) 1 in stock

Redd & Whyte Preddator Liquid Handling Robot System Lab

ITEM-36367

Redd & Whyte Preddator Liquid Handling Robot System


This was removed from a university lab where it was surplus to requirements.


The unit powers up, passes all self-checks and the arm moves. It is in good cosmetic condition with minor marks from use.


There is a laptop with it, which unfortunately has had the hard drive removed and has no software. There are a lot of discs supplied but none are the control software for the system.


1x Windows XP Professional Installation CD 2002

1x Dell Monitor Software CD

1x Dell Installation Software CD

1x Windows XP Professional Installation CD, discs1, 2, 3 and 4

1x Datalogic WinHost 2.00 Configuration CD 2004

1x Moxa Networking CD

1x Windows XP Professional Guide Pamphlet


Image of Astell Scientific Top Loading Autoclave AACO52 Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell Scientific Top Loading Autoclave AACO52 Lab

ITEM-23259

This Astell Scientific Top Loading Autoclave AACO52 was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request.


It is in good cosmetic condition with minor marks from use.

Image of New Brunswick Scientific G-24 Environmental Incubator Shaker

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific G-24 Environmental Incubator Shaker

ITEM-52626

New Brunswick Scientific G-24 Environmental Incubator Shaker


This item was removed from a facility where it was surplus to requirement.


It is in good working order.


Please note:  A faint high-pitched knocking noise was noted during operation, although the platform remained relatively stable, additionally the temperature controller display fluctuated slightly during testing.

Image of Grant XUB5UK Ultrasonic Bath Lab

£ 500.00 (ex. VAT) 1 in stock

Grant XUB5UK Ultrasonic Bath Lab

ITEM-51300

Grant XUB5UK Ultrasonic Bath Lab


This item was removed from a facility where it was surplus to requirement.


It is in good working order.


Image of Tefcold SE10-45 Low Temperature Chest Freezer Lab

£ 500.00 (ex. VAT) 1 in stock

Tefcold SE10-45 Low Temperature Chest Freezer Lab

ITEM-51291

Tefcold SE10-45 Low Temperature Chest Freezer Lab

This item was removed from a facility where it was surplus to requirement.


It is in good working order.


Image of  Eppendorf Mobile Centrifuge Table Model 5821

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Mobile Centrifuge Table Model 5821

ITEM-51293

Eppendorf Mobile Centrifuge Table Model 5821


This item was removed from a facility where it was surplus to requirement.


It is in excellent cosmetic condition.


Dimensions;


  • External length (cm) 70
  • External width (cm) 64
  • External height (cm) 47

It is compatible with following centrifuge:


  • 5810, 5810R, 5804 & 5804 R
Image of Genevac Technologies Table Lx130 Wx70 Hx82 cm Lab

£ 500.00 (ex. VAT) 1 in stock

Genevac Technologies Table Lx130 Wx70 Hx82 cm Lab

ITEM-48653

Genevac Technologies Table (Lx130 x Wx70 x Hx82 cm)


This item was removed from a facility where it was surplus to requirements.


It was previously used with a Genevac VC3000TA and Genevac HT-8 system, with a vacuum pump mounted underneath.


The table remains in relatively good condition overall, with some areas of surface rust present.

Image of Scanbur Warming Cabinet Type-48-VS-III Lab

£ 500.00 (ex. VAT) 1 in stock

Scanbur Warming Cabinet Type-48-VS-III Lab

ITEM-44883

Scanbur Warming Cabinet Type-48-VS-III Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order.


It is in good cosmetic condition, other than tape holding on a damaged alarm light cover.

Image of Union Carbide Liquified Gas Container Liquid Nitrogen Dewar Lab

£ 500.00 (ex. VAT) 1 in stock

Union Carbide Liquified Gas Container Liquid Nitrogen Dewar Lab

ITEM-46190

Union Carbide Liquified Gas Container Dewar


This item was removed from a university lab where it was surplus to requirement.


It is in reasonably good cosmetic condition, we are unable to test it further at our facility.


Image of Sanyo MCO-175 CO2 Incubator Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.


This item is fixed with castors.

Image of Sorvall RC 5C Plus RC-5C+ Centrifuge Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC 5C Plus RC-5C+ Centrifuge Lab

ITEM-37328

Sorvall RC 5C Plus Centrifuge Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and powers on.

However, during testing, the item produced the following code: Error Code 4 - indicating a 'Drive system failure'.


Which prevented further testing from being conducted.


Therefore, it is listed as Spares/Repair.


Image of Grant FH15 Flow Heater and FC20 Flow Cooler Lab

£ 500.00 (ex. VAT) 1 in stock

Grant FH15 Flow Heater and FC20 Flow Cooler Lab

ITEM-42784

Grant FH15 Flow Heater and FC20 Flow Cooler


This system was removed from a university laboratory where it was surplus to requirements.


The FH15 Flow Heater powered on with the pump running. The heater light illuminated when the set temperature was increased above ambient.

The FC20 Flow Cooler powered on, and both the compressor and fan could be heard operating.


These units do not include a built-in tank and require an external header tank to function as part of a complete system. Due to this, full-range temperature testing was not performed.

It is in good cosmetic condition.


Includes:

  • Grant FH15 Flow Heater (Serial No. 72311)
  • Grant FC20 Flow Cooler (Serial No. 72311)

  • Model: FH15 / FC20
  • Serial No.: 72311
Image of Triple Red Duo Organic 60 Ultra Pure Water Purification System Lab

£ 500.00 (ex. VAT) 1 in stock

Triple Red Duo Organic 60 Ultra Pure Water Purification System Lab

ITEM-45397

Triple Red Duo Organic 60 Ultra Pure Water Purification System


This item was removed from a university where it was surplus to requirements.


It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.


Included Components:

  • Avidity Carbon Pre-Filter
  • P/N: TR-2057
  • Install Date: 26/7/23
  • Avidity Cartridge Pack
  • P/N: TR-2050
  • Install Date: 26/7/23
  • Avidity Cartridge Polisher
  • P/N: TR-2051
  • Install Date: 26/7/23

Specifications:

  • Model: Organic 60 Ultra Pure Water Purification System
  • Serial No.: 0916961-01

Image of Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker  Lab

£ 500.00 (ex. VAT) 1 in stock

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker Lab

ITEM-46239

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker


This item was removed from a laboratory where it was surplus to requirements.


The shaker powers on and operates at the maximum RPM of 400.

It is in poor cosmetic condition.


Model: AK-82

Image of Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

£ 500.00 (ex. VAT) 1 in stock

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

ITEM-46240

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker


This item was removed from a laboratory where it was surplus to requirements.


The shaker powers on and operates at the maximum RPM of 400. It is in reasonably good cosmetic condition.


Model: AK-82

Image of Eppendorf A-2-DWP 3,700 rpm Rotor

£ 500.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP 3,700 rpm Rotor

ITEM-46920

Eppendorf A-2-DWP Rotor


This item was removed from a university laboratory where it was surplus to requirements.


It is in good cosmetic condition. It was unable to be tested further.


Specifications:

  • Maximum speed: 3,700 rpm
  • Maximum RCF: 2,250 × g
  • Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
  • Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

Image of ELGA Purelab Option S 15 Model OS015XXM1 2018

£ 500.00 (ex. VAT) 1 in stock

ELGA Purelab Option S 15 Model OS015XXM1 2018

ITEM-51523

ELGA Purelab Option S 15 Model OS015XXM1 2018


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.


Last Service: 04/03/2025

Image of Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

ITEM-48418

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and remains untested.


Specifications;

  • Platform: Floor Prep
  • Rotor Type: Swinging-Bucket (Ultracentrifugation)
  • Maximum RPM: 40,000 rpm
  • Max g-Force: 285,000.00
  • k-Factor: 137
  • Number of Tubes: 6×14 mL / 14×95 mm(6×14 mL / 1×4 in)
Image of Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

ITEM-48416

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and remains untested.


Specifications;

  • Rotor Type Ultra – Swinging Bucket
  • Maximum Speed 41,000 rpm
  • Maximum RCF at r max (g) 288,000 x g
  • k-Factor 124
  • Rotor Material Titanium
  • Bucket Material Titanium, Anodized Aluminum Cap

Image of LTE Scientific Falcon 30 Benchtop Laboratory Autoclave Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LTE Scientific Falcon 30 Benchtop Laboratory Autoclave Lab

ITEM-46403

LTE Scientific Falcon 30 Benchtop Laboratory Autoclave


This item was removed from a university lab where it was surplus to requirements.


The unit powers on and is in reasonably good cosmetic condition. However, it failed a recent service.


Therefore, it is listed as Spares/Repair.

Image of Sorvall RC-3B Plus Floor Standing Centrifuge Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-3B Plus Floor Standing Centrifuge Lab

ITEM-46525

Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in reasonably good cosmetic condition but has not been tested on site due to the service report attached stating;


Rotor lock: Seized, cannot remove rotor

No reported problems Service and check as above Unit is old

Note 6: door seal has shrunk and will not go back into place

Note 9: chamber is corroded due to substance.

Note 10: gas struts have failed, lid is heavy and can fall.

Note 12: drive shaft housing corroded.


Therefore, it is listed as Spares/Repair.

Image of Systec DB-45 Autoclave Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Systec DB-45 Autoclave Lab

ITEM-46571

Systec DB-45 Autoclave Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

Image of Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220

ITEM-46647

Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however, the previous owner has stated it is not in working order.

Image of Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump Lab

ITEM-48347

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump – Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It is in good cosmetic condition and powers on; however, the previous owner has stated it is faulty, with the fault unspecified. Supplied with cables for connecting to the rest of a system, along with an Automatic Backpressure Valve (PN-900-13702-000).


Includes:


  • Cables for system connection
  • Automatic Backpressure Valve (PN-900-13702-000)
Image of Genevac VC3000TA Vapour Condenser Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Genevac VC3000TA Vapour Condenser Lab

ITEM-48656

Genevac VC3000TA Vapour Condenser Spares/Repair Lab


This item was removed from a facility where it was surplus to requirement.


It is in good cosmetic condition, but was unable to be tested as it requires connection to a Genevac Centrifugal Evaporator. (Not included)


Additionally, the previous owner notified us that it was faulty, although the fault was not diagnosed,


It is therefore listed as Spares/Repair

Image of Bellco Biotechnology Production Roller Apparatus Model 7340-10230

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Bellco Biotechnology Production Roller Apparatus Model 7340-10230

ITEM-49770

Bellco Biotechnology Production Roller Apparatus (Model 7340-10230) – Spares/Repair


This item was removed from a facility where it was surplus to requirements.


The unit is in poor cosmetic condition and is missing several rollers. The rear panels were loose but have been secured with new nuts and bolts. The item powers on, and the motor can be heard running; however, the rollers do not move at all.


Due to this operational fault and missing components, the unit is offered as Spares/Repair.


Model: 7340-10230

Image of Thermo Scientific Max Q 4000 Shaking Incubator Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Max Q 4000 Shaking Incubator Lab

ITEM-50208

Thermo Scientific MaxQ 4000 Shaking Incubator – Spares/Repair


This was removed from a laboratory environment where it was surplus to requirements.


The unit powers on and is in good cosmetic condition with minor marks from use.


Following inspection and basic fault-finding, power is confirmed as reaching the unit and the PSU is functioning correctly.


However, power is not being passed through the control board to the PSU. This indicates a likely fault with the power control board.


The unit is therefore listed as Spares/Repair.

Image of MTI Corporation Hot Sealing Machine

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MTI Corporation Hot Sealing Machine

ITEM-50824

MTI Corporation Hot Sealing Machine


This item has been removed from a facility as part of a surplus clearance.


The powers on, however, it is currently non-functional due to a pneumatic/sealing fault.


Due to this issue, the unit is being sold as spares or repair.

Image of Beckman L5-50B Ultracentrifuge Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L5-50B Ultracentrifuge Lab

ITEM-51430

Beckman L5-50B Ultracentrifuge Spares/Repair Lab


This item was removed from a facility where it was surplus to requirement.


The unit powers on, however, it displays a balance error which prevents any further testing from being carried out.


It is therefore being sold for Spares/Repair.

Image of Sorvall RC-6 Plus Floor Standing Centrifuge Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-6 Plus Floor Standing Centrifuge Lab

ITEM-52688

Sorvall RC-6 Plus Floor Standing Centrifuge


This item was removed from a facility where it was surplus to requirement.


The unit powers on but displays alarm “E38”. The onboard information menu advises that alarms E10–E95 are intended for service personnel, therefore no further fault information could be obtained.


Please note that the centrifuge arrived with several internal connections unplugged.


Due to this fault, the unit could not be fully tested and is therefore being sold for spares or repair.

Items 701 to 750 of 1411

Filters

Price (£)

to

Condition