General Laboratory

£ 800.00 (ex. VAT) 1 in stock

New Brunswick Scientific Ultra Low Temperature Freezer Model U410 -45

ITEM-41362

New Brunswick Scientific Ultra Low-Temperature Freezer Model-U410 -45

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order to -45˚C. It was tested with a digital thermometer (not included).

It is in great cosmetic condition.

£ 800.00 (ex. VAT) 1 in stock

MVE Cryo-Shipper Mini 5.9Ltr with ShipsLog 3 Temperature Data Logger Lab

ITEM-38173

MVE Cryo-Shipper Mini 5.9Ltr with ShipsLog 3 Temperature Data Logger Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Neck Opening in (mm): 8.50 (216.0)

Overall Height in (mm): 20.0 (508)

Outside Diameter in (mm): 11.60 (295)

This item includes the following:

ShipsLog 3 Temperature data logger.

£ 800.00 (ex. VAT) 1 in stock

Buchi Rotavapor R-124 and Buchi Waterbath B-481

ITEM-52569

Buchi Rotavapor R-124 and Buchi Waterbath B-481

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

Buchi Rotavapor R-124
Model - R-124
S/N - 10011521

Buchi Waterbath B-481
Model - B-481

£ 800.00 (ex. VAT) 1 in stock

Heidolph Laborota 4001 Rotavapor w/ Heidolph Heizbad WB Digit Waterbath

ITEM-52565

Heidolph Laborota 4001 Rotavapor w/ Heidolph Heizbad WB Digit Waterbath

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

Heidolph Laborota 4001 Rotavapor
Model - Laborota 4001
S/N - 090101631

Heidolph Heizbad WB Digit Waterbath
Model - B-490
S/N - 080107466

£ 800.00 (ex. VAT) 1 in stock

Wentworth Laboratories Model AVT 701 Anti-Vibration Table

ITEM-54734

Wentworth Laboratories Model AVT 701 Anti-Vibration Table

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

£ 800.00 (ex. VAT) 1 in stock

Jun-Air OF302-25MQ Air Compressor Lab

ITEM-55070

Jun-Air OF302-25MQ Air Compressor Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Total hours: 2190(8)

£ 800.00 (ex. VAT) 1 in stock

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature Data Logger Lab

ITEM-38169

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Neck Opening in (mm): 8.50 (216.0)

Overall Height in (mm): 21.5 (546)

Outside Diameter in (mm): 14.50 (369)

Also includes the following:

ShipsLog 3 Temperature data logger.

£ 800.00 (ex. VAT) 1 in stock

Lancer Labsec 1400 14UP Glassware Dryer Lab

ITEM-36873

This Lancer Labsec 1400 14UP Glassware Dryer was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

£ 800.00 (ex. VAT) 1 in stock

Piramoon PTI Fiberlite F8S-6x1000Y 8000rpm Centrifuge Rotor Lab

ITEM-36650

This Piramoon PTI Fiberlite F8S-6x1000Y 8000rpm Centrifuge Rotor was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition but has some scuff marks around the thread.

It has not been tested at our facility.

£ 800.00 (ex. VAT) 1 in stock

IWT Techniplast ATA Laboratory Washer AT 116

ITEM-30227

IWT Techniplast ATA Laboratory Washer AT 116

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 800.00 (ex. VAT) 1 in stock

Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab

ITEM-37244

Beckman GS-6KR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.

Includes:-

Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
4 x Buckets, the cover for one of the baskets is not included.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Hitachi Sorvall Discovery M120 Refrigerated S/R Broken Motor Mount Lab

ITEM-47196

Sorvall Discovery M120 Floor-Standing Refrigerated Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, further testing was not possible due to the motor mount being broken.

Therefore, it is listed as Spares/Repair.

£ 800.00 (ex. VAT) 1 in stock

Nuaire Laboratory CO2 Incubator Model NU-5500E Lab

ITEM-46363

Nuaire Laboratory Incubator Model NU-5500E Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

RECERTIFIED ITEM

£ 800.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

ITEM-37017

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

Please note: This item has had its humidity sensor removed, therefore it no longer supports humidity control features.

It is in good cosmetic condition with minor marks.

2 Shelves - 52 x 48cm

$Image of Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab$

£ 800.00 (ex. VAT) 1 in stock

Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab

ITEM-46195

Oxford Cry Systems Crystal Diffractometer Cryostream Probe

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was not possible to test the functionality at our facility.

Includes:

Single crystal diffractometer cryostream probe

£ 800.00 (ex. VAT) 1 in stock

Jouan SA EB115 Elec Sans Therm Incubator Lab

ITEM-49428

Jouan SA EB115 Elec Sans Therm Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition.

£ 800.00 (ex. VAT) 1 in stock

Antech Scientific CryoMaster 900 Liquid Nitrogen Cryogenic Storage Dewar

ITEM-51295

Antech Scientific CryoMaster 900 Liquid Nitrogen Cryogenic Storage Dewar

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested on site.

The previous owner stated it was in working order prior to removal

Dimensions;

External length (cm) 46
External width (cm) 46
External height (cm) 98

£ 800.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab

ITEM-47240

GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Included;

6 x Storage Racking.

£ 800.00 (ex. VAT) 1 in stock

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

ITEM-47241

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Included;

6 x Sample Storage Racks.

£ 800.00 (ex. VAT) 1 in stock

Sartorius ENTRIS124I-1S 4dp Balance Lab

ITEM-56157

Sartorius ENTRIS124I-1S 4dp Balance Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: It will require calibrating before use.

RECERTIFIED ITEM

£ 800.00 (ex. VAT) 1 in stock

Sigma SciQuip Refrigerated Centrifuge - 1-15K w/ Sigma 12024-H Rotor Lab

ITEM-58316

Sigma SciQuip Refrigerated Centrifuge - 1-15K w/ Sigma 12024-H Rotor Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 790.00 (ex. VAT) 1 in stock

Wentworth Laboratories Ltd AVT 701 Anti-Vibration Table

ITEM-54449

Wentworth Laboratories Ltd AVT 701 Anti-Vibration Table

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

£ 770.00 (ex. VAT) 1 in stock

IKA RV10 Digital Rotary Evaporator w/ IKA HB10 Digital Water Bath

ITEM-52568

IKA RV10 Digital Rotary Evaporator w/ IKA HB10 Digital Water Bath

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

IKA RV10 Digital Rotary Evaporator
Model - RV 10 D S99

IKA HB10 Digital Water Bath
Model - HB 10 D S99
S/N - 07.353419

£ 760.00 (ex. VAT) 1 in stock

IKA RV10 Digital Rotary Evaporator w/ IKA HB10 Digital Water Bath

ITEM-52567

IKA RV10 Digital Rotary Evaporator w/ IKA HB10 Digital Water Bath

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

IKA RV10 Digital Rotary Evaporator
Model - RV 10 D S99
S/N - 07.355593

IKA HB10 Digital Water Bath
Model - HB 10 D S99

£ 760.00 (ex. VAT) 1 in stock

Grant XUB5 Digital Ultrasonic Water Bath Lab

ITEM-51361

Grant XUB5 Digital Ultrasonic Water Bath

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

2 x ILS 1200mm K8 Industrial Fume Cupboards

ITEM-52758

2 x 1800mm K8 Industrial Fume Cupboards

These Fume Cupboards were removed from a facility where they were surplus to requirement.

The units were in good cosmetic condition; however, they were over-dismantled on site by the client and components have been mixed between the two cupboards. They will not be reassembled.

For this reason, both fume cupboards are being sold strictly as spares/repairs.

Dimensions (each unit):

1800mm (W) x 1000mm (D) x 2150mm (H)
100mm lower opening

Specification:

Trespa linings and baffle
AFA4000/2 Airow alarm
Low energy LED lamp
1 x Cold water valve and outlet
1 x DI water valve and outlet
2 x Vulcathene drip cups
2 x Vulcathene bottle traps
2 x Double switched socket outlets

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab

ITEM-50356

Beckman Coulter Biomek 2000 Laboratory Automation Workstation

This item was removed from a laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition.

Please note: The plastic trays within the working area show signs of use and appear to be slightly warped.

The item powers on, however we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

IKA RV10 Digital Rotary Evaporator w/ IKA HB10 Digital Water Bath

ITEM-52566

IKA RV10 Digital Rotary Evaporator w/ IKA HB10 Digital Water Bath

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

IKA RV10 Digital Rotary Evaporator
Model - RV 10 D S99
S/N - 07.355588

IKA HB10 Digital Water Bath
Model - HB 10 D S99
S/N - 07.347824

RECERTIFIED ITEM

£ 750.00 (ex. VAT) 1 in stock

Genlab CI/100 Cooled Incubator Lab

ITEM-55640

Genlab CI/100 Cooled Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: During inspection and testing, a loud grating noise was heard from the internal fan assembly. Investigation found the rubber retaining stopper to be perishing and occasionally allowing the fan to move out of position. The stopper was repositioned for testing and the unit operated correctly afterwards, however movement during transport may cause the issue to reoccur.

RECERTIFIED ITEM

£ 750.00 (ex. VAT) 1 in stock

Sigma 1-14 Benchtop Centrifuge w/ Rotor 14800 RPM

ITEM-52707

Sigma 1-14 Benchtop Centrifuge with Rotor – 14,800 RPM

This item was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition and is in good working order.

Please note that a high-pitched whine becomes noticeable when the unit is operated above approximately 10,000 RPM.

£ 750.00 (ex. VAT) 1 in stock

Purite HP160 BP/IT L300255 Water Purification System w/ Accessories Lab

ITEM-54548

Purite L300255 Water Purification System w/ Accessories Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Inlcudes;

Pretreat PT8 (EXP: 10.19)
Puripac PP8 (EXP:04.22)
HP700 Deioniser (PN: L991024)

£ 750.00 (ex. VAT) 1 in stock

Planer Kryo 360 - 3.3, LNP 4 and GOMRV Controlled Rate Freezer System

ITEM-54735

Planer Kryo 360 - 3.3, LNP 4 and GOMRV Controlled Rate Freezer System

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP Deepwell Plate Rotor 3700 RPM Lab

ITEM-51837

Eppendorf A-2-DWP Deepwell Plate Rotor 3700 RPM Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

RECERTIFIED ITEM

£ 750.00 (ex. VAT) 1 in stock

OHAUS Frontier FC5706 Benchtop Centrifuge w/ OHAUS 21/490 Rotor Lab

ITEM-53126

OHAUS Frontier FC5706 Benchtop Centrifuge w/ OHAUS 21/490 Rotor Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

OHAUS 21/490 Rotor 6000RPM

Frontier Centrifuge FC5706 Instruction Manual
Frontier Centrifuge User Guide

£ 750.00 (ex. VAT) 1 in stock

MVE CryoShipper 8.5 ltr Nitrogen Dewer Lab

ITEM-38175

MVE CryoShipper 8.5 ltr Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

Neck Opening in (mm): 8.50 (216.0)

Overall Height in (mm): 21.5 (546)

Outside Diameter in (mm): 14.50 (369)

ShipsLog 3 Temperature Lid fitted.

The data log is not included.

Last calibrated: 04:01:2021.

Last serviced: 04:06:2021.

£ 750.00 (ex. VAT) 1 in stock

Bright Refrigerated Cryostat Microtome OTF/AS Lab

ITEM-31880

Bright Refrigerated Cryostat Microtome OTF/AS

This was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 750.00 (ex. VAT) 1 in stock

Labcaire PCR8 PCR Workstation/Laminar Flow Cabinet Lab

ITEM-51575

Labcaire PCR8 PCR Workstation/Laminar Flow Cabinet Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; There is no UV bulb fitted.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

ITEM-46523

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably poor cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Grant XUB5 Digital Ultrasonic Water Bath Lab

ITEM-51360

Grant XUB5 Digital Ultrasonic Water Bath

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

NEW ITEM

£ 750.00 (ex. VAT) 4 in stock

Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab

ITEM-52663

Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab

This item was removed from a facility where it was surplus to requirement.

It is brand new in its original packaging.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

£ 750.00 (ex. VAT) 1 in stock

Corbett Robotics CAS1200 Liquid Handling System

ITEM-45135

Corbett Robotics CAS-1200 Liquid Handling System

This item was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in good cosmetic condition.

Includes:

Manual
Model: CAS-1200

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab

ITEM-46521

Sanyo MCO-18AIC CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-46522

Sanyo MCO-17AI CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition, although the door handle has snapped off. This does not affect its functionality.

£ 750.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 CO2 Incubator Lab

ITEM-46576

Heraeus Heracell 150 CO2 Incubator

This item was removed from a university where it was surplus to requirements.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition but will require a replacement screw-in type CO2 filter, as the original has a broken end.

The unit was successfully tested using a filter from another incubator.

Model: Heracell 150

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

ITEM-37249

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

This item was removed from a university where it was surplus to requirement.

It is in good, used cosmetic condition.

Specifications:

Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
Angle: 45° Fixed, 12 to 87° Swinging Bucket
Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 750.00 (ex. VAT) 1 in stock

Nuaire DH Autoflow NU-5500E CO2 Air-Jacketed Incubator Lab

ITEM-49731

Nuaire DH Autoflow CO2 Air-Jacketed Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

It was last serviced in December 2024.

£ 750.00 (ex. VAT) 1 in stock

Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR Lab

ITEM-18169

This Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR was removed from a university lab where it was surplus to requirements.

Autoclave has now been fully tested by a technician and confirmed to be fully working.

The only recommendation is that the safety valve is replaced prior to use. A brand new one should be fitted on installation by the new user.

Internal dimensions:-

Depth - 41cm

Width - 30cm

Height - 30cm

Holes size on tray - 21mm

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m

ITEM-42459

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 154 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m

ITEM-42418

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 149 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop