General Laboratory

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Savant SPD121P-230 Speed Vac Centrifugal Vacuum Concentrator Lab Spares/Repairs

ITEM-30217

Savant SPD121P-230 Speed Vac Centrifugal Vacuum Concentrator

This was removed from a university lab where it was surplus to requirements.

The unit is operational and powers on successfully. However, as the lid does not lock properly, it is listed as Spares or Repair.

It is in good cosmetic condition with minor marks.

Rotor holds 40 x 2ml tubes

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Benchtop Centrifuge with S40 Rotor Lab

ITEM-29821

This Jouan B4i Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

This item includes the following rotor:

Thermo Jouan High Throughput Swing-Out Rotor Model S40

Max Load 2.00kg

Max speed 4300 (rpm)

This item ran at 4000rpm with S40 Rotor fitted.

As stated in the manual, the maximum speed for a swing-out rotor on this unit is 4000 rpm.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Packard 9200 Hydrogen Generator B920000 Lab Spares/Repairs

ITEM-28161

Packard 9200 Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen.

It is in reasonably good cosmetic condition, but has some marks from use.

it is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

Sigma 2-16P Centrifuge with Nr.12148 15300/min Rotor Lab

ITEM-28148

This Sigma 2-16P Centrifuge with Nr.12148 15300/min Rotor was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It does begin to whistle above 10000rpm, but we believe this is just down to the lid seal.

It has had new lid struts fitted and new QR lid release plugs.

With it is a Sigma Nr.12148 15300/min Centrifuge Rotor.

Good used condition.

Measures:

Approx 17cm.

Centre bore: 10.8mm.

Tube holes: 10.8 x 36.2mm.

24 sample holes.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Helix CTI-Cryogenics Compressor Model: SCW Part no: 8032211 Lab Spares/Repairs

ITEM-26078

This Helix CTI-Cryogenics Compressor Model: SCW Part no: 8032211 was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition but the front vent/panel is bent in one corner, preventing it from being secured. There are scratches and other marks along the surface and edges.

The unit does not power up and is sold for spares/repairs.

The absorber was last changed March 1997

Weight & dimensions are as follows:

L 52cm x W 50cm x H 42cm

75kg

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair

ITEM-26006

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up but shows error 21 - wiring fault.

It is sold for spares/repairs.

A 4600rpm rotor is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Incubator Model - 170-300 Spares/Repairs

ITEM-25477

RS Biotech Galaxy R CO2 Incubator Model - 170-300

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has no screen. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Scotsman Ice Machine Model AF20 Lab Spares/Repairs

ITEM-24772

This was removed from a university lab where it was surplus to requirements.

The unit powers up and holds mains water pressure but has an issue with evaporation temperature being high, and/or and issue with auger rotation. It likely requires an NTC sensor.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional Dishwasher GG05 Spares/Repairs

ITEM-24741

Miele Professional Dishwasher GG05

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested. The inlet pressure is sufficient, the filter has been checked, cleaned and the propeller adjusted but shows an error 404 message which indicates there is an inlet issue.

It is sold for spares/repairs as it needs a new inlet.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan MR22i Refrigerated Centrifuge with SWM180.5 Rotor Lab Spares/Repairs

ITEM-24229

Jouan M22i refrigerated centrifuge with Jouan 5000rpm rotor

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, we are unable to test it further as there's an error with the door lock sensor that prevents any use.

Also, the screen visibility is poor, therefore it is listed as Spares/Repair.

Includes:

Jouan four bucket rotor SWM180.5

Max 5000 rpm

Load charge 2.000kg

£ 500.00 (ex. VAT) 1 in stock

Bright B5151 Laboratory Cryostat Lab

ITEM-23971

This Bright Microtome 5040 Laboratory Cryostat was removed from a university lab where it was surplus to requirements.

The unit powers up and the light works. It has been tested with a digital thermometer (not included).

It was set to -35˚C. We ran for it for 6 hours and Quick Freezer Temperature got to -35˚c, Specimen Temperature got to -14˚c and the chamber Temperature got to -15˚c.

£ 500.00 (ex. VAT) 1 in stock

Huber Minichiller Refrigerated Laboratory Water Bath Lab

ITEM-23396

This Huber Minichiller Refrigerated Laboratory Water Bath was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included).

When set to -20˚C it dropped to -12˚C after running for 5 hours. It is not designed to heat.

It is in good cosmetic condition with some marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell Hearson MN2950 Autoclave Lab Spares/Repairs

ITEM-20667

This was removed from a university lab where it was surplus to requirements.

It is sold for spares/repairs as the wiring has been deemed unsafe.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Panasonic MIR-554-PE Cooled Incubator Lab Spares/Repairs

ITEM-20210

This Panasonic MIR-554-PE Cooled Incubator was removed from a university lab where it was surplus to requirements.

The unit powers and incubates well, but has a faulty cooling system.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs

Interior dimensions:

D52cm x W64cm x H127cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model - MCO-17AIC Lab Spares/Repairs

ITEM-20014

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the CO2 functions do not work. This is caused by a power board fault.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Bench-Top Lab Centrifuge 14000rpm + Tube Rotor Lab

ITEM-11932

This unit was removed from a lab as surplus to requirements.

At our site, we tested it and it ran up to 14,000 rpm smoothly.

We have not tested the unit any further.

£ 500.00 (ex. VAT) No longer available

Liebherr Model LKUEXV 1610 Laboratory Fridge Lab

ITEM-39025

Liebherr Model LKUEXV 1610 Laboratory Fridge Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

It is in great cosmetic condition.

3 x Shelves (60x60cm)

Internal dimensions - L43 W44 H67cm

Instruction manual included.

£ 500.00 (ex. VAT) No longer available

Liebherr MediLine LGUEX 1500 Freezer Lab

ITEM-41360

Liebherr MediLine LGUEX 1500 Freezer Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

It is in great cosmetic condition.

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 490.00 (ex. VAT) 1 in stock

Air Science DWS 48 Downdraft Fume Hood- 48" / 1200mm Wide Downflow Workstation

ITEM-32030

This Air Science DWS 48 Ductless Fume Hood Workstation was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and in full working order.

Work area 122 x 50cm

£ 490.00 (ex. VAT) No longer available

Liebherr 1610 LKUEXV Laboratory Refrigerator Fridge Lab

ITEM-39026

Liebherr 1610 LKUEXV Laboratory Fridge Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

It is in great cosmetic condition.

3 x Shelves (60x60cm)

Internal dimensions - L43 W44 H67cm

Instruction manual included.

£ POA No longer available

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

This item is new in stock. Please enquire for further details.

£ 485.00 (ex. VAT) 1 in stock

Mettler Toledo F2 Class 20KG Calibration Weight 11118212 Lab

ITEM-31757

Mettler Toledo 20KGF2 Class Calibration Weight

This was removed from a laboratory where it was surplus to requirements.

The unit is in good cosmetic condition but the case has marks from use.

£ 485.00 (ex. VAT) 1 in stock

Buchi R-210 Rotavapor Rotary Evaporator & Heidolph Heizbad WB Water Bath Lab

ITEM-31450

Buchi R-210 Rotavapor Rotary Evaporator & Heidolph Heizbad WB Water Bath

This was removed from a university lab where it was surplus to requirements.

The system powers up and the motor and the water bath are in full working order. It is in reasonable cosmetic condition with marks and stains.

Included are;

1 x Buchi Rotavapor

Type - R-210

SN - 0700006764

Adjustable height from 47 to 57cm

1 x Heidolph Water Bath

Type - Heizbad WB

SN - 029902413

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 475.00 (ex. VAT) 1 in stock

Elga Model: PURELAB FLEX Water Purification System Lab

ITEM-34576

This was removed from a university lab where it was surplus to requirements.

We were unable to test the unit as it was not supplied with the PSU

Max Pressure: 1.5/22 Inlet.

bar/psi: 1.5/22 Working.

Elga LC197 - Biofilter fitted - Expiry Date 2020-02.

Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

£ 470.00 (ex. VAT) 1 in stock

Lot of WestBart Cryogenic Laboratory Chest Freezer Racking Lab

ITEM-38813

Lot of WestBart Cryogenic Laboratory Chest Freezer Racking

This was removed from a university lab where it was surplus to requirements.

Included are the following;

The Different Sizes of racking

22 X 3 Shelves

External Dimensions - 14 x 14 x 56

Internal Dimensions - Per Shelf 3 X - 14 x 14 x 25

8 X 10 Rod Shelves

External Dimensions - 14 x 14 x69

Internal Dimensions - Per Shelf 10 X - 14 x 14 x 6

8 X 8 Shelves with open sides

External Dimensions - 14 x 14 x 67

Internal Dimensions - Per Shelf 8 X - 14 x 14 x 8

4 X 4 Shelves

External Dimensions - 56 x 14 x 42

Internal Dimensions - Per Shelf 4 X - 56 - 14 - 10

4 X 7 Shelves

External Dimensions - 56 x 14 x 42

Internal Dimensions - Per Shelf 4 X - 56 - 14 - 6

1 X 7 shelves with notches

External Dimensions - 56 x 14 x 42

Internal Dimensions - Per Shelf 4 X - 56 - 14 - 6

1 X 1 shelf with 4 Side vents

External Dimensions - 55 x 14 x 24

Internal Dimensions - 47 x 14 x 18

1 X 40 Shelf Slots

External Dimensions - 16 x 14 x 46

Internal Dimensions - 16 x 14 x 42

£ 460.00 (ex. VAT) 1 in stock

Sanyo MIR-262 Laboratory Incubator Lab

ITEM-34942

This Sanyo MIR-262 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition with marks from use.

3 Shelves - 57 x 48cm

£ 455.00 (ex. VAT) 1 in stock

ELE Paqualab 25 Portable Incubator + Accessories for Water Testing

ITEM-25139

This ELE Paqualab 25 Portable Incubator with Accessories was removed from a university lab where it was surplus to requirements.

The ELE Paqualab 25 includes a universal incubator with 2 pre-set temperatures (normally 37°C and 44°C), a membrane filtration kit, connecting cables and operating manual. All components are housed in a convenient rigid carrying case which can also accommodate a number of electronic meters from the ELE Paqualab range.

The unit is in good cosmetic condition with some light marks from use. It is housed in a travel case along with the accessories. The case is in good cosmetic condition.

The unit powers up and seems to be in working order. There is a rocker switch on the unit that can be set to 37ºC and 44ºC it was tested with a digital thermometer (not included).

Set at 37ºC our thermometer read 37.2˚C

Set at 44ºC our thermometer read 44.1˚C

Accessories:

25x pairs of Aluminium Petri Dishes

1x sample stand

1x dual Crocodile clip lead (red/black)

2x plastic bottles of Gelman Filtration products (Filters)

1x plastic bottle of m-Lauryl Sulphate Broth 1x 38.1g Batch No. 224318

1x Gelman performance and spec sheet

1x Gleman plastic widget

1x open box of Gelman GN-6 Grid 47mm sterilised membranes

(box contents not counted)

1x 300ml Aluminium vessel (gold in colour)

1x 200ml Aluminium vessel (silver in colour)

1x Aluminium Cartridge

1x sealed 50ml tube of Multipurpose Grease 556-446

1x sealed bag Magnifying Glass7017A0001

1x 110mm cover slip forceps L325/01

1x 12v plug adaptor

4x 60ml empty plastic bottles w/ lids

£ 455.00 (ex. VAT) 1 in stock

BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet Lab

ITEM-29789

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it was surplus to requirements.

The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this.

It is in good cosmetic condition with minor marks from use.

Internal dimensions are: L114cm x W40cm x H66cm.

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 450.00 (ex. VAT) 1 in stock

Air Liquide GT 38 Liquid Nitrogen Dewar with 6 x Storage Racks

ITEM-45507

GT 38 Liquid Nitrogen Dewar with Storage Racks

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition. We are unable to test it at our facility.

Includes:

6 x Metal Cylinders

£ 450.00 (ex. VAT) 1 in stock

Statebourne Bio 35 Liquid Nitrogen Dewar & Trolley Lab

ITEM-45190

Statebourne Bio 35 Nitrogen Dewar

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition. We are unable to test it at our facility.

Includes:

6 x Metal Cylinders

Double walled vacuum vessel.

£ 450.00 (ex. VAT) 1 in stock

Envair Bio 2+ Class 2 Microbiological Safety Cabinet Lab

ITEM-41393

Envair Bio 2+ Class 2 Microbiological Safety Cabinet

This was removed from a laboratory where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included.

Internal dimensions:

Dx55 Wx106 Hx70cm

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus BB 16 Function Line CO2 Incubator Lab

ITEM-39055

Heraeus BB 16 Function Line CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

£ 450.00 (ex. VAT) 1 in stock

ELMI Sky Line Digital Orbital Rocking Shaker Rocker S-4 Lab

ITEM-35383

ELMI Sky Line Digital Orbital Rocking Shaker Rocker S-4 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The power supply is not included.

£ 450.00 (ex. VAT) 1 in stock

Wentworth Laboratories Model AVT701 Vibration Isolation Table Lab

ITEM-30553

Wentworth Laboratories Model AVT701 Vibration Isolation Table

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition but has marks from use. It has not been tested.

Plate on top dimensions - 68 x 49.5cm

Whole table dimensions - 90x63x75cm LWH

£ 450.00 (ex. VAT) 1 in stock

LEEC F1 Glassware Drying Cabinet Warming Oven Lab

ITEM-37238

LEEC F1 Glassware Drying Cabinet Warming Oven Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

£ 445.00 (ex. VAT) 1 in stock

6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg

ITEM-36492

6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg

These were removed from a working lab where they were surplus to requirements.

All are in good cosmetic condition with minor marks.

Included are

Mettler Toledo F2 100g

Serial#: B128168752

Mettler Toledo F1 200g

Serial#: 132554

Troemner 200g

Serial#: 76359

Fisherbrand F1 1kg

Serial#: 06-J14833-12

Mettler Toledo F2 1kg

Serial#: B128168753

Mettler Toledo F1 1kg

Serial#: 158691

£ 440.00 (ex. VAT) 1 in stock

Perkin Elmer C6 Chiller Pyris Cooling Accessory Lab

ITEM-35527

Perkin Elmer C6 Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test tit further. It is in good cosmetic condition with minor marks from use.

RECERTIFIED ITEM

£ 435.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab

ITEM-35168

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.

It is in good cosmetic condition with minor marks from use.

3 Shelves - 52 x 42.5cm

£ 435.00 (ex. VAT) 1 in stock

Sigma 3 K 18 Refrigerated Laboratory Centrifuge Lab

ITEM-29721

This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed.

It is in reasonably good cosmetic condition with minor marks from use.

£ 430.00 (ex. VAT) No longer available

Du Pont Sorvall Benchtop Centrifuge Model - RT 6000D with H1000B 3600RPM Rotor

ITEM-25304

This Du Pont Sorvall Benchtop Centrifuge Model - RT 6000D with H1000B 3600RPM Rotor was removed from a university lab where it was surplus to requirements.

The item powers on with rotor speed running smoothly up to 3600rpm.

The temperature was first set to 4˚c which it reached quickly. The temperature was then set to its minimum setting of -20˚c. After an hour of running, the display read -14˚c but the thermometer was reading -20˚c.

The item is in a reasonable, used cosmetic condition with marks from use.

Rotor:-

Du Pont Instruments Sorvall H1000B

3600 Max RPM

4 x Sorvall Buckets (PN - 11053)

15 x Sorvall bucket adapters:-

1 x Green 00455 for 4 x 50ml tubes

2 x Green 00836 for 35 x 5ml tubes

2 x Black 00884 for 10 x 15ml tubes

2 x Purple 00847 for 20 x 12ml tubes

4 x Blue 00904 for 4 x 50ml tubes

4 x Yellow 00186 for 1 tube - diameter 63mm

£ 430.00 (ex. VAT) 1 in stock

Jeio Tech Lab Companion Orbital Laboratory Shaker Model - SKC-6075 Lab

ITEM-24382

This Lab Companion Orbital Laboratory Shaker Model - SKC-6075 was removed from a university lab where it was surplus to requirements.

The item powers on and appears to be in good working order with shaker speed running up to 410rpm. It comes with 8 Non-slip mats

The item is in good used cosmetic condition with light marks.

£ 430.00 (ex. VAT) 1 in stock

Grant-Bio PHMP Microplate Thermoshaker Shaking Incubator Lab

ITEM-23299

This Grant-Bio PHMP Microplate Thermoshaker was removed from a university lab where it was surplus to requirements.

The unit powers up and was tested with a digital thermometer (not included). The power supply is included.

It is in good cosmetic condition, with some very minor marks from use.

£ 425.00 (ex. VAT) 1 in stock

MVE XLC 230 Liquid Nitrogen Dewar Lab

ITEM-29731

MVE XLC 230 Liquid Nitrogen Dewar

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with marks from use but has not been tested.

It comes with 6 storage racks each with 8 draws.

Internal Dimensions are: D70cm x W40cm.

£ 420.00 (ex. VAT) 1 in stock

Schutt Homgen Type 3.200 011 Homogeniser Lab

ITEM-34580

This Schutt Homgen Type 3.200 011 Homogeniser was removed from a university lab where it was surplus to requirements.

The unit powers up and the chuck turns but there is no tool attached. It is in good working order.

It is in reasonable cosmetic condition but has some marks and rust from age.

£ 415.00 (ex. VAT) 1 in stock

Wentworth Laboratories Model 701 Vibration Isolation Table Lab

ITEM-30552

This Wentworth Laboratories Model 701 Vibration Isolation Table was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with some marks and some light rusting. It has not been tested.

Plate on top dimensions - 61 x 41cm