General Laboratory
Items 351 to 400 of 972

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,350.00 (ex. VAT) 1 in stock
Kendro HeraCell 150 Heraeus Incubator Lab
ITEM-41645
HeraCell 150 Heraeus Incubator Lab
This item was removed from a university where it was surplus to requirement.
The unit has been recertified and is in good working order.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,350.00 (ex. VAT) 1 in stock
Hera Cell 150 Incubator Heraeus Thermo Electron Corporation Lab
ITEM-41601
Hera Cell 150 Incubator Heraeus Thermo Electron Corporation Lab
This item was removed from a university where it was surplus to requirement.
The unit has been recertified, and is in reasonably good cosmetic condition.

£ 1,350.00 (ex. VAT) 1 in stock
LabCaire TC 1200 Class II Safety Cabinet Lab
ITEM-41594
LabCaire TC 1200 Class II Safety Cabinet Lab
This was removed from a laboratory where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. (Socket tester not included)
I

£ 1,350.00 (ex. VAT) 1 in stock
Panasonic MDF-U33V-PE Ultra-Low Temperature Freezer Lab
ITEM-46192
Panasonic MDF-U33V-PE Ultra-Low Temperature Freezer Lab
This item was removed from a university lab where it was surplus to requirement.
The unit is in good cosmetic condition and in full working order.

£ 1,350.00 (ex. VAT) 1 in stock
New Brunswick Innova 4300 Incubator Shaker Lab
ITEM-46265
New Brunswick Innova 4300 Incubator Shaker
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in reasonably good cosmetic condition. It functions well, although it is slow to reach the set RPM.
Includes:
- Flask Mounts with Fittings
- Test Tube Holding Racks

£ 1,350.00 (ex. VAT) 1 in stock
Miele Professional G 7883 Laboratory Glassware Washer Lab
ITEM-35870
Miele Professional G7883 Laboratory Glassware Washer
This was removed from a university lab where it was surplus to requirements.
It has been pressure tested at our site, and the lab confirmed it was fully working prior to removal.
It powers up and is in reasonably good cosmetic condition with marks from use.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,350.00 (ex. VAT) 1 in stock
Sanyo MCO-18AC CO2 Incubator Lab
ITEM-38888
Sanyo MCO-18AC CO2 Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.
It is in good cosmetic condition.
This unit has been professionally serviced and is in full working order.
The service report is available on request.

£ 1,350.00 (ex. VAT) 1 in stock
MVE Cryo-Shipper Mini 5.9Ltr with ShipsLog 3 Temperature Data Logger Lab
ITEM-38173
MVE Cryo-Shipper Mini 5.9Ltr with ShipsLog 3 Temperature Data Logger Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Neck Opening in (mm): 8.50 (216.0)
Overall Height in (mm): 20.0 (508)
Outside Diameter in (mm): 11.60 (295)
This item includes the following:
ShipsLog 3 Temperature data logger.

£ 1,350.00 (ex. VAT) 1 in stock
Don Whitley Scientific miniMACS Anaerobic Workstation Glovebox Safety Cabinet
ITEM-30207
This Don Whitley Scientific miniMACS Anaerobic Workstation was removed from a university lab where it was surplus to requirements.
The unit has been looked at by a qualified service engineer.
The pump works from the main socket but not from the instrument socket. They cleaned the filter which was previously making the pump run loudly. They repaired the fans which were previously broken.
They have tested the cabinet with a vacuum pump and it seems it is holding the vacuum. Although one piece of plexiglass holding the right door lock is broken. The system holds a vacuum despite this.
The temperature was tested up to 37˚c, it took about an hour to reach this.
It is in reasonably good cosmetic condition but has some minor marks from use and the aforementioned crack.

£ 1,350.00 (ex. VAT) 1 in stock
Air Liquide Arpege 55 Liquid Nitrogen Dewar lab
ITEM-44612
Air Liquide Arpege 55 Dewar lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic, but we are unable to test it further at our facility.
Inner Dimensions:
38(W)x38(L)x66(H) cm
Also included:
6 x Storage Sample Racks

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,350.00 (ex. VAT) 1 in stock
Heraeus HeraCell 150 Incubator Lab
ITEM-41679
Heraeus Hera Cell 150 Incubator Lab
This item was removed from a university where it was surplus to requirement.
The unit has been recertified and is in very good cosmetic condition.

£ 1,335.00 (ex. VAT) 1 in stock
Scanlaf Mars 1200 Biohazard Safety Cabinet Class 2 Lab
ITEM-36473
Scanlaf Mars 1200 Biohazard Safety Cabinet Class 2
This was removed from a university lab where it was surplus to requirements.
The unit is in full working order and in good cosmetic condition with marks from use.
There is no stand supplied.

£ 1,315.00 (ex. VAT) 1 in stock
Genevac miVac Duo Centrifugal Concentrator DUC-23050-A00 Lab
ITEM-35032
This Genevac miVac Duo Centrifugal Concentrator was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
The unit is in reasonably good cosmetic condition but has a cosmetic crack in the lid and the seal has split.

£ 1,300.00 (ex. VAT) 1 in stock
New Brunswick Scientific Classic C24 Incubator Shaker Lab
ITEM-31977
This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where it was surplus to requirements.
The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm.
It is in reasonable cosmetic condition but has some fairly heavy usage marks.
Internal dimensions - L54 W52 H36cm
Shaker Platform - 45.5 x 45.5cm
Tube stand inside holds 20 x 50ml tubes

£ 1,300.00 (ex. VAT) 1 in stock
Jouan Water Jacketed Incubator Model IG150 Lab
ITEM-29770
This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.
It is in good cosmetic condition with minor marks.
Internal dimensions are: L41cm x W41cm x H60cm.

NEW ITEM
NEW ITEM
£ 1,300.00 (ex. VAT) 1 in stock
Sartorius Stedim 16374 Calibration Kit & Specially Designed Holder for BioWelder
ITEM-36493
Sartorius Stedim 16374 Calibration Kit & Specially Designed Holder for BioWelder
This was removed from a working lab where it was surplus to requirements.
We believe it is new and unused.

£ 1,280.00 (ex. VAT) 1 in stock
Lauda Alpha Model RA 8 Chilling Thermostatic Water Bath
ITEM-38848
Lauda Alpha RA 8 Cooling Thermostatic Water Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digital thermometer used for testing not included).
It is in good cosmetic condition with minor marks.

£ POA 1 in stock
Brema Laboratory Ice Flaker Machine Model - GB 1555 A Lab
ITEM-28134
This item is new in stock. Please enquire for further details.

£ 1,270.00 (ex. VAT) 1 in stock
Lauda Alpha Model RA 8 Cooling Thermostatic Water Bath Lab
ITEM-38844
Lauda Alpha RA 8 Cooling Thermostatic Water Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digital thermometer used for testing not included).
It is in good cosmetic condition with minor marks.

£ 1,270.00 (ex. VAT) 1 in stock
Jouan IGO150 CELLlife CO2 Laboratory Incubator Lab
ITEM-17203
This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation.
It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level.
Internal dimensions 48x58x48cm LWH

£ 1,260.00 (ex. VAT) 1 in stock
Lauda Alpha RA 8 ChillingThermostatic Water Bath Lab
ITEM-38850
Lauda Alpha RA 8 Cooling Thermostatic Water Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digital thermometer used for testing not included).
It is in good cosmetic condition with minor marks.

£ 1,255.00 (ex. VAT) 1 in stock
Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab
ITEM-23391
This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition with marks from use. All modules power up.
We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.
The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.
The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.
We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.
The system is made up of the following;
1 x Matrix Hydra II
Cat no. 109610
1 x Matrix 2 Position Stage
1 x Apogent Discoveries Matix Hydro Pump Module
The unit powers on with all 3 Fills working.
1 x Matrix P1 Control Box
1 x Innovadyne 1-Channel Nanofill
The unit powers up.
1 x Grant Instruments Type MS1
The unit powers up.
Dell Laptop with Microsoft Mouse
Model - PP04X
Hydra II-Plus-One Control Software Version 3.1.3 Installed
The unit powers up and the software runs.
Software Discs:
Matrix Hydra II-Plus-One Control Software Version 3.1.3
Matrix Hydra II-Plus-One Control Software Version 3.1.2
SuperLogics LE Software Suite Rev 2.9
2 x Socket Installation discs
Various tubing and accessories
Operating instructions

£ 1,250.00 (ex. VAT) 1 in stock
Beckman JA-25.50 Rotor- 25,000RPM Lab
ITEM-46447
Beckman JA-25.50 Rotor- 25,000RPM Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition, it has not been tested.
Specifications:
- Platform -Avanti
- Rotor Type -Fixed-Angle (High Performance)
- Maximum RPM -25,000 rpm
- Max g-Force -75,600.00
- k-Factor -418
- Number of Tubes -8x50 mL / 29x104 mm(8x50 mL / 1x4 in)

£ 1,250.00 (ex. VAT) 1 in stock
Beckman Model JA-25.50 Rotor- 25,000RPM Lab
ITEM-46448
Beckman JA-25.50 Rotor- 25,000RPM Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition, it has not been tested.
Specficiations;
- Platform -Avanti
- Rotor Type -Fixed-Angle (High Performance)
- Maximum RPM -25,000 rpm
- Max g-Force -75,600.00
- k-Factor -418
- Number of Tubes -8x50 mL / 29x104 mm(8x50 mL / 1x4 in)

£ 1,250.00 (ex. VAT) 1 in stock
Heto Drywinner DW 1,0-60E Freeze Dryer Lab
ITEM-45094
Heto Drywinner DW 1,0-60E Freeze Dryer
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in fair cosmetic condition. The vacuum elements have been tested with an in-house vacuum pump and are fully functional, with taps successfully shutting off airflow.
The unit has been temperature tested (thermometer not included).
Specifications:
- Model: DW 1,0-60E
- Serial No.: 97711001B

£ 1,250.00 (ex. VAT) 1 in stock
BMG LabTechnologies ThermoStar Microplate Incubator Shaker Lab
ITEM-46380
BMG LabTechnologies ThermoStar Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and in working order.

£ 1,250.00 (ex. VAT) 1 in stock
Foster Eco Pro G2 Model EP700G Lab Refrigerator W/ Internal Sockets Lab
ITEM-46207
Foster Eco Pro G2 Model EP700G Refrigerator W/ Internal Sockets Lab
This item was removed from a university lab where it was surplus to requirement.
The unit powers up and is in good working order (socket tester not included).
It is in good cosmetic condition.

£ 1,250.00 (ex. VAT) 1 in stock
QL-1000 Laboratory Hydrogen Generator Lab
ITEM-35669
QL-1000 Laboratory Hydrogen Generator
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
It is in good cosmetic condition with minor marks.

£ 1,250.00 (ex. VAT) 1 in stock
Thermo Fisher Scientific NESLAB RTE 7 Circulating Water Bath Refrigerated Lab
ITEM-44712
Thermo Fisher Scientific NESLAB RTE 7 Circulating Water Bath Refrigerated Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition.

£ 1,250.00 (ex. VAT) 1 in stock
Heraeus Labofuge 400R Refrigerated Centrifuge With Swing Rotor Lab
ITEM-41466
Heraeus Labofuge 400R Refrigerated Centrifuge With Swing Rotor Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition.
Also includes the following:
1 x Heraeus 8179 Swingout Rotor 4 x 180ml
1 x Round Bucket 180ml
75008172
8 x Bucket Insert

NEW ITEM
NEW ITEM
£ 1,250.00 (ex. VAT) 1 in stock
Thermo Scientific Digital Waving Rotator 88882004 Lab
ITEM-41794
Thermo Scientific Digital Waving Rotator 88882004 Lab
This item was removed from a university where it was surplus to requirement.
It is in excellent cosmetic condition and in good working order, it has been tested to its MAX (120 RPM).
The box was only opened for testing. We believe this unit is brand new and unused.
The unit comes with the following:
2 x Power Supply Cables
1 x Physical Manual
2 x Spare shocks

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,250.00 (ex. VAT) 1 in stock
Sorvall Discovery 100SE Refrigerated Floor Standing Centrifuge Lab Spares/Repair
ITEM-29790
Sorvall Discovery 100SE
This was removed from a university lab where it was surplus to requirements.
The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside.
It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage.
It is sold for spares/repairs.

£ 1,250.00 (ex. VAT) 1 in stock
Beckman Coulter JA-25.50 Fixed Angle Rotor 8x50ml 25000RPM Lab
ITEM-46145
Beckman Coulter JA-25.50 Fixed Angle Rotor 8x50ml 25000RPM Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.

£ 1,250.00 (ex. VAT) 1 in stock
Beckman Coulter JA-25.50 Fixed Angle Rotor
ITEM-39053
This Beckman Coulter JA-25.50 Fixed Angle Rotor was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used.
Capacity: 8 x 50 mL
Max RPM: 25,000

£ 1,250.00 (ex. VAT) 1 in stock
Savant Universal Vacuum System UVS400A with VaporNet Lab
ITEM-34906
Savant Universal -UVS400A- Vacuum
Model: UVS400A
SN: UVS400A-9J430168-4
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It was tested with a digital thermometer (not included).
It is in reasonable cosmetic condition, with marks from use.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,240.00 (ex. VAT) 1 in stock
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
ITEM-36282
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work.
It is in good cosmetic condition with marks from use.
The system consists of:
1 x CAS1200 Robot
SN - A110618
1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.
Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.
All leads needed are included.

£ 1,235.00 (ex. VAT) 1 in stock
Heraeus Megafuge 1.0R Refrigerated Centrifuge With 2800RPM Rotor
ITEM-39094
Heraeus Megafuge 1.0R Refrigerated Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. The refrigeration was tested at 4˚C and worked well.
It is in good cosmetic condition with marks from use.
Rotor max RPM- 2800
The rotor holds 24 x 15ml tubes

£ 1,230.00 (ex. VAT) 1 in stock
Jouan VXS 570 Laboratory Deep Freezer -85C Lab ULT Ultra Low Temperature Freezer
ITEM-21171
This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to requirements.
The unit powers up and was tested with a digital thermometer.
It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C.
The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.

£ 1,230.00 (ex. VAT) 1 in stock
Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV) Lab
ITEM-32019
This Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV)was removed from a university lab where it was surplus to requirements.
Both units have been tested with and CO2 and temperature sensor and are in good working order. They will require calibration upon installation.
They are in good cosmetic condition with minor marks from use.
Top:-
Model - MCO-17AI
SN - 60301691
External dimensions - L70 W63 H90cm
Internal dimensions - L50 W48 H66cm
3 Shelves - 45 x 45cm
Net Weight - 91kg
Bottom:-
Model - MCO-18AIC (UV)
SN - 31112791
External dimensions - L71 W64 H91cm
Internal dimensions - L51 W48 H66cm
3 Shelves - 45 x 45cm
Net Weight - 93kg

£ 1,220.00 (ex. VAT) 1 in stock
Amersham Biosciences Ettan Spotter,PC & Software,Various Parts & Accessories Lab
ITEM-39898
Amersham Biosciences Ettan Spotter, Various Parts & Accessories
This was removed from a university lab where it was surplus to requirements.
The unit has been tested and works well.
A Windows XP PC with Ettan Digester software is included.
It is in good cosmetic condition with minor marks
Included are;
Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003 x 2
215 Utility Programs
Ettan Spotter Test Procedure
Ettan Spotter Instrument Handbook
Ettan Spotter User Manual
Ettan Spotter Safety Handbook
Ettan Digester Control Software 1.10
Calibration Plate
Calibration Tool
Distance Tool
215 Level Sensor Cable Assy
Fuse, 2.5 amp T-2.5
Clip, Extruded Cable/Tubing
Fuse Drawer 110/120V
Coupling 1/4-28, PVDF
Shielded Gsioc Cable 30"

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,220.00 (ex. VAT) 1 in stock
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
ITEM-36281
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work.
It is in good cosmetic condition with marks from use.
The system consists of:
1 x CAS1200 Robot
SN - A080821
1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.
Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.
All leads needed are included.

£ 1,220.00 (ex. VAT) 1 in stock
MVE CryoShipper 8.5 ltr Nitrogen Dewer Lab
ITEM-38175
MVE CryoShipper 8.5 ltr Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it at our facility.
Neck Opening in (mm): 8.50 (216.0)
Overall Height in (mm): 21.5 (546)
Outside Diameter in (mm): 14.50 (369)
ShipsLog 3 Temperature Lid fitted.
The data log is not included.
Last calibrated: 04:01:2021.
Last serviced: 04:06:2021.

£ 1,205.00 (ex. VAT) 1 in stock
Ventana 750-200 Discovery Slide Staining System Lab
ITEM-39265
This Ventana 750-200 Discovery Slide Staining System was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further at our facility.
It is in reasonably good cosmetic condition with minor marks.
Includes:
-Instruction manual
-Discovery 10X EZ prep solution (expired on 28/12/2017)
-7 x reagent bottle modules
Item is missing waste module
Model- 750-200
S/N- 810683

£ 1,205.00 (ex. VAT) 1 in stock
Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank Lab
ITEM-34946
Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested at our facility.
8 x Storage Racks - 12.5 x 8 x 48.5cm
9 sections per pack - 12.5 x 7.5cm

£ 1,200.00 (ex. VAT) 1 in stock
Texol Genysis NitroGenerator Nitrogen Generator
ITEM-42154
Texol Genysis NitroGenerator Nitrogen Generator
This item was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition, with some stain marks on the top and side panels.
It is mounted on four wheels and operates on a 24-volt power system, but no power adapter is supplied.
When powered on, the front power light illuminated, and the programmer inside the front door displayed system information. No further testing could be carried out as the unit must be controlled by an external system.
Power supply not included.

£ 1,200.00 (ex. VAT) 1 in stock
LabNet Accuseal Semi-Automated Plate Heat-Sealer Lab
ITEM-46189
LabNet Accuseal Semi-Automated Plate Heat-Sealer Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and in good working order.

£ 1,200.00 (ex. VAT) 1 in stock
Sanyo MDF-U5386S Ultra Low Temperature Freezer ULT Lab
ITEM-41763
Sanyo MDF-U5386S Ultra Low Temperature Freezer ULT
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition internally and externally.

£ 1,200.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Laboratory Automation Workstation Lab
ITEM-42116
Beckman Coulter Biomek NXp Laboratory Automation Workstation
This system was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition with some surface wear. According to the previous owner, the system is fully operational but was sold due to lack of use and space constraints.
This Biomek NXp was serviced in December 2023
Specifications:
- Model: Biomek NXp
- Serial No.: A318400876
Additional Components:
- DFMZ Design Filtration Microzone
- Model: DA1-1x2-2
- Serial No.: 952213
Accessories Included:
- Insert Pak 11mm Non-Sterile (Serial No.: 3364)
- 2 x Top Plate, Multi-Config Peltier ALP (Part No.: A32165 REV AA)
- 15 x Reservoirs, 75 ml, Case Sterile (Lot: P61122MPI)
- Physical Manual: Version 3.3 Tutorial

£ 1,200.00 (ex. VAT) 1 in stock
Sanyo Medicool Pharmaceutical Refrigerator Model - MPR -511 Lab
ITEM-40074
Sanyo Medicool Pharmaceutical Refrigerator Model - MPR -511
This item was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It was tested with a digital thermometer (not included).
It is in great cosmetic condition.
Unit includes 5 Shelves: 76x45 cm

£ 1,200.00 (ex. VAT) 1 in stock
Ventana Model 750-200 Discovery Slide Staining System Lab
ITEM-39266
This Ventana 750-200 Discovery Slide Staining System was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further at our facility.
It is in reasonably good cosmetic condition with minor marks.
Includes:
-Instruction manual
-Discovery 10X EZ prep solution (expired on 28/12/2018)
-LCS predilute (expired on 30/11/2018)
-RiboWash bulk reagent (expired on 31/5/2010)
-Reaction buffer concentrate (10x) (expired on 30/6/2019)
-Cell conditioning solution (CC1) (expired on 31/3/2018)
-7 x reagent bottle modules
-Waste module
-Relevant cables
-Temperature verifier slides (expired on 30/4/2020)
Items 351 to 400 of 972