General Laboratory

£ 6,500.00 (ex. VAT) 1 in stock

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave Lab

ITEM-34883

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further at our facility.

It is sin good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 6,135.00 (ex. VAT) 1 in stock

Astell Scientific Top Loading Autoclave AACO52 Lab

ITEM-23259

This Astell Scientific Top Loading Autoclave AACO52 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request.

It is in good cosmetic condition with minor marks from use.

£ 6,110.00 (ex. VAT) 1 in stock

Beckman Avanti Model J-25 Refrigerated Centrifuge Lab

ITEM-36881

Beckman Avanti Model J-25 Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a JA20 rotor (Not included). It worked well up to the tested speed of the rotor's max of 20,000rpm. The refrigeration works well.

It is in reasonably good cosmetic condition with some minor marks.

£ 6,100.00 (ex. VAT) 1 in stock

Priorclave Model PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35119

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 6,010.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45129

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 2295
M24 Controller

£ 6,000.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45128

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 1861
M24 Controller

£ 6,000.00 (ex. VAT) 1 in stock

Binder CB-S 170 CO2 Incubator Double Stack Lab

ITEM-39009

Binder CB-S 170 CO2 Incubator Double Stack Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 6,000.00 (ex. VAT) 1 in stock

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab

ITEM-39002

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, white light, UV, and window up/down function properly.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 78 x 180cm

Unit height with stand: 226cm

Included is Vacuubrand VHC PRO Vacuum Hand Controller as well as the stand.

Socket tester not included.

£ 6,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips

ITEM-38068

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips

This was removed from a university lab where it was surplus to requirements.

The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand ne

It is in good cosmetic condition with minor marks from use.

The system includes:

Biomek NXP Workstation

Serial No. A318410608

Beckman Coulter FX Device Controller

Cat No. 719366

Serial No. 00717635AM0718110002

Beckman Coulter Accuframe

Serial No. 00717820AG0711110001

ThinkCentre PC with Windows 7

Serial No. 1S5852BL2MJWLDN9

Software:

Biomek System Install Disk v3.3

Beckman Coulter Sami Workstation Software v4.0

Beckman Coulter Recovery DVD MORBK29A

Biomek Tutorials v3.3

Accounts and Permissions v3.1

Additional parts/Accessories:

2 x Manuals Biomek NX and NXP v3.3 Tutorial

1 x Active Curtain test rod

Beckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes

1 x Roylan Developments StoragePod Dundee serial No. 000224 15 x 14 x 40cm

1 x complete front polycarbonate safety screen kit with all parts and fixings

10 x data leads

120 x 96 well plates, chimney well TC with lids

5 x workstation table fittings

9 x microplate holders

1 x pipette exchanger holder

12 x ferrite cable noise reducers

£ 6,000.00 (ex. VAT) 1 in stock

Priorclave PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35118

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 6,000.00 (ex. VAT) 1 in stock

Oxford Cryofree System

ITEM-30345

Oxford Cryofree System

This was removed from a university lab where it was surplus to requirements.

The unit has not been fully tested.

The system includes;

1x Oxford Intelligent Gas Handling System with Femto Power Thermometry unit:

Part No. CSB1001

The unit powers on.

1x Oxford Instruments Cyrofree Cylinder

Project No. 418726

The unit is in good cosmetic condition.

There are some light tape marks and some colour bleaching from general use.

1x Trivac Pump:

Type D65B

3 Phase 16A Plug

1x/10-4

The unit powers on and is in good cosmetic condition.

6 x Cylindrical Vessels:

Volume and Dims of Vessels:

•4.5L (H62cm x W13.5cmx L13.5cm)

•5.25L (H59cm x W12.5cm x L12.5cm)

•2.25L (H33.5cm x W9.25cm x L9.25cm)

•2L (H34cm x W9cm x L9cm)

•11.5L (H75cmx W22cm x L22cm)

• 4.5L (H72cmx W13.5cm x L13.5cm)

1x Metal flex Hose:

2x Metal 3x valve sealed Cylinders:

£ 6,000.00 (ex. VAT) 1 in stock

Bespoke Purpose Built Laboratory Autoclave Room Lab

ITEM-38271

Bespoke Purpose Built Laboratory Autoclave Room

This is being sold on behalf of a client. It is surplus to requirements.

The unit is in good working order, but will need to be dismantled on site by a potential buyer. The class 1 cabinet is included in the sale.

The system is located in Alnwick, Northumberland.

Any potential buyer will need to be able to dismantle the system for removal.

It is going to need a lot of building work to be demolished, supported and reinstated for the removal. Also the water mains etc. The unit is mounted to the floor but has extensive pipework that goes approximately 4-5 feet below ground.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 6,000.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 4000 Liquid Handler Laboratory Automation Workstation Lab

ITEM-26794

This Beckman Coulter Biomek 4000 Liquid Handler Laboratory Automation Workstation is being sold on behalf of a university. It is surplus to requirements.

The system is in full working order. It was purchased by the university in 2014 as part of a special package for £45k+VAT. We have the original PO documentation details all parts etc.

The system is still at the universities site, but we are able to arrange delivery including international delivery. If you require anything from the instrument such as sample runs etc please let us know.

Viewings will be possible on request.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 5,995.00 (ex. VAT) 1 in stock

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.8 + Stand

ITEM-38897

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.8 + Stand

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. This model is not fitted with a UV light.

It is in good cosmetic condition with minor marks from use.

£ 5,550.00 (ex. VAT) 1 in stock

Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab

ITEM-39001

Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, UV, white light, and window up/down function properly.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 78 x 150cm

Includes:

-Manual

-Stand for unit

£ 5,500.00 (ex. VAT) 1 in stock

Thermo Fisher Class 2 Safe 2020 1.5 Biological Safety Cabinet Lab

ITEM-39000

Thermo Fisher Class 2 Safe 2020 1.5 Biological Safety Cabinet

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, white light, UV, and window up/down function properly.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 64 x 120cm

Includes:

-Manual

-Stand for unit

RECERTIFIED ITEM

£ 5,500.00 (ex. VAT) 1 in stock

Priorclave Tactrol 2 PS/QCS/EH150 Laboratory Autoclave Lab

ITEM-25467

This Priorclave Tactrol 2 Autoclave Type - PS/QCS/EH150 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with marks from use.

£ 5,430.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Multifuge X3R Centrifuge with 4700RPM Rotor

ITEM-35878

Thermo Scientific Heraeus Multifuge X3R Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It has a cycle count of 417.

It is in excellent cosmetic condition.

Rotor - Thermo Scientific 75003607 - Max 4700 RPM

Buckets - 4 x Thermo Scientific 75003607

Adaptors:

2 x Green Sorvall Heraeus 75003638- fits 5 x 50ml tubes

2 x Brown Sorvall Heraeus 5003639- fits 12 x 15ml tubes 5003639

Includes Instruction manual

The centrifuge was set to -10ºc successfully. It was then set to 4ºc successfully and finally set to 37ºc

Cycle count - 417

Serial number- 41006326

Model number- X3R

£ 5,385.00 (ex. VAT) No longer available

Thermo Scientific Heraeus Multifuge X3R Centrifuge & 4700RPM Rotor & Buckets Lab

ITEM-35880

Thermo Scientific Heraeus Multifuge X3R Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It has a cycle count of 336.

It is in excellent cosmetic condition.

Included with it are;

Rotor - Thermo Scientific 75003607 - Max 4700 RPM

Buckets - 4 x Thermo Scientific 75003608

Adaptors:

2 x Green Sorvall Heraeus 75003638- fits 5 x 50ml tubes

4 x Thermo Scientific Bucket Lids

RECERTIFIED ITEM

£ 5,315.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Refrigerated Incubator Shaker SHKA5000-8CE Lab

ITEM-21099

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation.

It is in good cosmetic condition with marks from use.

Internal Dimensions: L 86cm x W 56cm x H 47cm.

Shaking area Dimensions: L 76cm x W 46cm.

RECERTIFIED ITEM

£ 5,270.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Refrigerated Shaking Incubator Lab

ITEM-30255

Thermo Scientific MaxQ 5000 Refrigerated Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation.

It is in good cosmetic condition with marks from use.

Internal dimensions - L86 W56 H47cm

Shaker Platform - 76 x 46cm

£ 5,245.00 (ex. VAT) 1 in stock

Thermo Scientific Safe 2020 Class 2 Safety Cabinet S2020 1.8 Lab

ITEM-36707

Thermo Scientific Safe 2020 Class 2 Safety Cabinet S2020 1.8

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is not fitted with a UV lamp.

It is in good cosmetic condition with marks from use.

Frame dimensions - L191 W71 H89cm

£ 5,220.00 (ex. VAT) 1 in stock

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2 Lab

ITEM-29785

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2

This was removed from a university lab where it was surplus to requirements.

At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed.

It is in excellent cosmetic condition with hardly any marks from use.

There are various accessories included.

£ 5,200.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Refrigerated Incubator Shaker SHKE5000-8CE Lab

ITEM-25607

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It was tested with a digital thermometer (not included).

It is in good cosmetic condition with minor marks.

£ 5,015.00 (ex. VAT) 1 in stock

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.5 + Stand

ITEM-38898

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.5 + Stand

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It does not have the UV option.

It is in good cosmetic condition with marks from use.

it is supplied with a dismantled stand.

£ 5,000.00 (ex. VAT) 1 in stock

2 x Newport RS4000 & Bridge in H-Configuration Optical Table Assembly 4.5 x 6M

ITEM-45638

Newport RS4000 H-Configuration Optical Table Assembly

This item is being sold on behalf of a client. It is surplus to requirements.

This large optical table system consists of an assembly of 3 Newport RS4000 Metric tables configured in the form of an "H."

It consists of 2 x 6 Meter Tables & 1 x Bridge Section 2 Meter Table - full dimensions listed below.

Table Dimensions:

Long Tables (2):
Length: 6 metres
Width: 1.5 metres
Thickness: 30 cm
Bridge Section:
Length: 2 metres
Width: 1.5 metres
Total Assembled Dimensions (As shown in diagram):
Length: 6 meters
Width: 4.5 meters

Please note that this sale is for the Optic Tables only, the supporting legs are not included.

Collection available from Surrey, United Kingdom, but we may be able to arrange shipping for an additional cost.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 5,000.00 (ex. VAT) 1 in stock

Foster + Freeman MVC3000 Fingerprint Fuming Cabinet

ITEM-44965

Foster + Freeman MVC3000 Fuming Cabinet

This item was removed from a university lab where it was surplus to requirements.

The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.

Therefore, further testing could not be conducted.

There is no filter fitted, the unit should work fine with one in.

Specifications:

1 Shelf: 74 x 58 cm
2 Baskets: 57 x 30 x 15 cm
Underneath space: 75 x 64 x 32 cm

Model: MVC3000

Serial No: 3175

£ 5,000.00 (ex. VAT) 1 in stock

Julabo FP50 GB Circulating Water Bath Lab

ITEM-44660

Julabo FP50 Circulating Water Bath Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in excellent cosmetic condition and appears to have had little use.

£ 5,000.00 (ex. VAT) 1 in stock

Vacucell Evo 111 Vacuum Oven w/ Vacustation & Hybrid RC 6 Pump VU 111 EVO Lab

ITEM-44396

Vacucell Evo 111 Double Compartment Vacuum Oven With Vacustation Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and full working order.

The previous client has stated that it was not used since its purchase in 2018.

This item requires a Password for operation, which is available on request when purchased.

Also includes the following:

1 x Vacuubrand Chemistry Hybrid RC 6 Pump

Full working order.

1 x Epson Printer

Full working order.

£ 5,000.00 (ex. VAT) 1 in stock

Peak Scientific Nitrogen Gas Generator N300DR Lab

ITEM-41417

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

RECERTIFIED ITEM

£ 5,000.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C Lab

ITEM-40009

Thermo Scientific Cytomat 24 C Lab

This item was removed from a university where it was surplus to requirement.

The unit has been professionally serviced and is in full working order.

The service report is available on request.

This item also includes the following:

1 x Operating instructions

1 x Software Documentation

£ 5,000.00 (ex. VAT) 1 in stock

Oxford Instruments OptistatDN Nitrogen Bath Cryostats Lab

ITEM-39964

This Oxford Instruments OptistatDN Nitrogen Bath Cryostats from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition, but due to the nature of the item we are unable to test it.

£ 5,000.00 (ex. VAT) 1 in stock

Thermo Fisher Class 2 Safe 2020 1.2 Biological Safety Cabinet Lab

ITEM-39004

Thermo Fisher Safe 2020 1.2 Class 2 Biological Safety Cabinet

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and the fan, airflow, white light, UV and window up/down function properly. It was last serviced in April 2024.

It is in good cosmetic condition with some minor marks from use.

Safe Working area 64 x 120cm

Includes:

-Manual

-Stand for unit

Socket tester not included.

£ 5,000.00 (ex. VAT) 1 in stock

Leica TP 1020 Tissue Processor Lab

ITEM-38202

Leica TP 1020 Tissue Processor

This system was removed from a university laboratory where it was surplus to requirements.

The unit is in good, clean condition, though the left-hand sliding door is cracked. This does not affect operation.

The unit powered on with the screen and controls working correctly. Carousel movement on all axis.

Specifications:

Model: TP 1020-_-1
Serial No.: 3741/03.2009
Activated carbon fume filter installed: 23-08-11
Wax bath capacity: 1.8 litres (2 baths)
Reagent container capacity: 1.8 litres (10 containers)
Version: V1.13
Number of programs: 9
Wax bath temperature range: 45˚C - 65˚C
Excess temperature cut-out: 75˚C ± 4˚C

Wax bath test results:

First bath stabilised at 68.7˚C
Second bath stabilised at 69.2˚C
(Tests were conducted without wax.)

£ 5,000.00 (ex. VAT) 1 in stock

Parker 4278 NitroFlowLab Nitrogen Gas Generator Lab

ITEM-37633

Parker NitroFlowLab 4278 Nitrogen Gas Generator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Running Hours: 26,042

Power supply cable included.

Product details:

Model 4278 Cryo

Serial No. 4278-18NFLC00010

Manufactured 29.05.18

0-8 barg operating pressure

10˚C to 35˚C operating temperature

£ 5,000.00 (ex. VAT) 1 in stock

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator Lab

ITEM-35037

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer used for testing not included).

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 5,000.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE Lab

ITEM-31545

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been extensively tested. It is in full working order.

It is in good cosmetic condition with minor marks.

This is the non-refrigerated model of this incubator.

RECERTIFIED ITEM

£ 4,790.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab

ITEM-34732

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.

The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it.

The system consists of:

1 x Beckman Coulter Biomek NXp Robot.

s/n A318410173.

Cat No A31841.

96 Well head.

1 x Beckman Coulter Tiploader.

1 x Beckman Coulter AccuFrame.

1 x Microscan MS-3 Laser (Barcode Reader)

1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.

This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

£ 4,620.00 (ex. VAT) 1 in stock

Thermo Scientific MSC 1.8 Class 2 Laboratory Safety Cabinet Lab

ITEM-35941

Thermo Scientific MSC 1.8 Class 2 Laboratory Safety Cabinet

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 4,550.00 (ex. VAT) 1 in stock

Beckman Coulter Optima L-90K Ultracentrifuge Lab

ITEM-35051

Beckman Coulter Optima L-90K Ultracentrifuge

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order. A full report is available on request.

It is in good cosmetic condition with minor marks.

£ 4,500.00 (ex. VAT) 1 in stock

Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Lab

ITEM-45551

Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Super-Lite Autoclavable Rotor

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. Temperature and RPM testing were conducted successfully.

Temperature Testing :

Set to -20.0ºC, stabilized at -18.0ºC
Set to 37.0ºC, stabilized at 37.0ºC
Set to 40.0ºC (max), stabilized at 40.0ºC

RPM Testing:

Held steady at 15,000 RPM

Included Rotor:

Sorvall SLA-1500 Super-Lite Autoclavable Rotor (max 121ºC)
In good cosmetic condition

£ 4,500.00 (ex. VAT) 1 in stock

Thermo Scientific Water Purification System Smart2Pure Lab

ITEM-44942

Thermo Scientific Water Purification System Smart2Pure

This system was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

However, it comes without pipes, connectors, or a PSU cable.

The item was tested with an in-house PSU cable.

£ 4,500.00 (ex. VAT) 1 in stock

BMM Weston Steam Generator Model 2616 w/ Lubron Osmostar 250 Water Purifier Lab

ITEM-41979

*Dimensions not added*

BMM Weston Steam Generator Model 2616 w/ Lubron Osmostar 250 Water Purifier Lab

This system was removed from a university where it was surplus to requirement.

Testing on these units is not possible due to the original hard-wiring of the steam generator and the presence of residual water in the filters and pipes. The steam generator will require re-wiring before use.

Unfortunately, the copper pipes were cut during removal, rather than being properly disconnected, therefore, will require substantial recommissioning work to get the system up and running again.

This system comprises the following:

BMM Weston Steam Generator

Model 2616

Serial No. DH14744

Two 30KW heating elements

123-litre boiler capacity

168˚C design temperature

6.6 bar operating pressure

Lubron Water Technologies Reverse Osmosis System

Model Osmostar 250

Serial No. 10022407

Year 2010

250 litres per hour, 30 bar working pressure

Lubron Softstar Water Softener

Serial No. 10012208

Year 2010

RECERTIFIED ITEM

£ 4,500.00 (ex. VAT) 1 in stock

Beckman Optima L-90K Ultracentrifuge Lab

ITEM-35050

Beckman Optima L-90K Ultracentrifuge Lab

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced, it is in full working order, and the full report is available on request.

It is in good cosmetic condition with minor marks.

A rotor is not included.

RECERTIFIED ITEM

£ 4,500.00 (ex. VAT) 1 in stock

Atlas Copco SF2FF Air Compressor & Air Cylinder

ITEM-30440

Atlas Copco SF2FF Air Compressor & Air Cylinder

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order. A full report is available on request.

It is in good cosmetic condition with minor marks from use.

£ 4,365.00 (ex. VAT) 1 in stock

CrystalMation Rigaku Minstrel HT & Gallery 700 Incubator System Lab

ITEM-25478

This CrytstalMation Rigaku Minstrel HT & Gallery 700 Incubator System was removed from a university lab where it was surplus to requirements.

The lab retained the "phoenix" unit and the image server PC as well as the software. It was reported as otherwise fully working.

Included in the system are;

1 x Middle PC Unit:-

Model - Minstrel HT PC/Monitor

1 x Model - Minstrel HT CCU

Hours -573282

1 x Dell Power Connect 2708

Dell PC - The unit powers on and has Minstrel & Robot Programs

2 x Model - Gallery 700 Incubators

Both the units power up.

Everything powers up but the system has not been tested, the incubators need to be connected to the PC unit to be operated. Everything looks to be in good, used cosmetic condition.

The manuals are included.

£ 4,310.00 (ex. VAT) 1 in stock

Buchi Rotavapor R-300 EL Rotary Evaporator with B-300 B-305 Bath & Base Lab

ITEM-36435

Buchi Rotavapor R-300 EL Rotary Evaporator with B-300 B-305 Bath & Base Lab

This was removed from a university lab where it was surplus to requirements.

The system is in full working order and has been tested to 100˚C We did not have the correct oil to test it to the full 220˚C, but there is no reason it should not work.

It is in excellent cosmetic condition with minor marks.

1x Buchi Rotavapor R-300

S/N: 1100032381

1x B-300 Base

S/N:1100029661

1x B-305 Bath

S/N: 1100032071

£ 4,245.00 (ex. VAT) 1 in stock

Redd & Whyte Preddator Liquid Handling Robot System Lab

ITEM-36367

Redd & Whyte Preddator Liquid Handling Robot System

This was removed from a university lab where it was surplus to requirements.

The unit powers up, passes all self-checks and the arm moves. It is in good cosmetic condition with minor marks from use.

There is a laptop with it, which unfortunately has had the hard drive removed and has no software. There are a lot of discs supplied but none are the control software for the system.

1x Windows XP Professional Installation CD 2002

1x Dell Monitor Software CD

1x Dell Installation Software CD

1x Windows XP Professional Installation CD, discs1, 2, 3 and 4

1x Datalogic WinHost 2.00 Configuration CD 2004

1x Moxa Networking CD

1x Windows XP Professional Guide Pamphlet

£ 4,060.00 (ex. VAT) 1 in stock

Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software

ITEM-36662

Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the system and the PC communicate. We were able to get the tool holder to unlock and lock. It is showing a temperature unit module 1 issue.

It is in good cosmetic condition with marks from use.

Model - epMotion 5075

SN - 5075 01005

Siemens Simatic PC

Eppendorf 6BK1800-0EP00-0AA0

Monitor not included.

RECERTIFIED ITEM

£ 4,045.00 (ex. VAT) 1 in stock

Thermo Scientific 3311 Forma Steri-Cult Co2 Incubator Lab

ITEM-36471

This Thermo Scientific 3311 Forma Steri-Cult Co2 Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested extensively at 37˚C and 5% CO2 as well is 50% humidity. (Testing probes not included).

We calibrated it to our working temperature and testing equipment, but will likely need calibrating again upon installation.

It is in full working order.

It is in good cosmetic condition with minor marks from use.

General Laboratory

Filters