General Laboratory
Items 201 to 250 of 1515
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,000.00 (ex. VAT) 1 in stock
Eppendorf CryoCube F101h-86 Ultra-Low Temperature Freezer Lab
ITEM-56114
Eppendorf CryoCube F101h-86 Ultra-Low Temperature Freezer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 24/4/25
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,000.00 (ex. VAT) 1 in stock
Eppendorf CryoCube F101h-86 Ultra-Low Temperature Freezer Lab
ITEM-56113
Eppendorf CryoCube F101h-86 Ultra-Low Temperature Freezer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 24/04/2025
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,000.00 (ex. VAT) 1 in stock
PCHBI MCO-230AICUV-PE CO2 Incubator (2022) Lab
ITEM-55865
PCHBI MCO-230AICUV-PE CO2 Incubator
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
- Last Service: 20/03/2024
£ 3,000.00 (ex. VAT) 1 in stock
Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator
ITEM-52872
Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator
This item was removed from a facility where it was surplus to requirement.
It powers on, we are unable to test it further at our facility.
£ 3,000.00 (ex. VAT) 1 in stock
ILS 1800W/K Walk-in Fume Cupboard 1800mm (W) x 900mm (D) x 2400mm (H)
ITEM-52757
ILS 1800W/K Walk-in Fume Cupboard – 1800mm (W) x 900mm (D) x 2400mm (H)
This unit was removed from a facility where it was surplus to requirements.
It is in good cosmetic condition and reported to be in good working order prior to disassembly.
The unit has been fully dismantled and would need to be reassembled.
Specification:
Overall dimensions: 1800mm (W) x 900mm (D) x 2400mm (H)
- Double split opening doors
- Type tested to BS EN 14175 at 0.30m/sec, 0.35m/sec, 0.40m/sec, and 0.50m/sec
- Inner chamber: 6mm Trespa TopLab BASE (Polypropylene and stainless steel options available)
- High-performance removable rear baffles for maintenance access
- Removable service panel (taps, sockets, alarm panel access)
- Removable front by-pass grille
- Low-energy light fitting with front-mounted switch
- 2 x MK double switched socket outlets
- TEL AFA tactile and digital fully programmable airflow monitor/alarm panel with VAV control option
£ 3,000.00 (ex. VAT) 1 in stock
Priorclave Tactrol 2 Advanced Autoclave B-QCS-SH200 Lab
ITEM-10030
This autoclave was removed from a university lab as surplus to requirements.
We were assured the unit was in good working order when last used, but was no longer required by the lab.
At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.
Type:B-QCS-54260
To:BS.2646
Capacity:200
Maxpressure:25
Serial No:2845
Date:9-1-06
Litres:2006
Test Pressure:394
Max Filling mass:100kg
Intended use:Sterilise
Product group:2
Design temp:150 degrees c
Max Temp: 138 degrees c
Min Temp: N/A
Voltage: V00 50/60 8KW
£ 3,000.00 (ex. VAT) 1 in stock
Metrohm 901 Titrando, 800 Dosino And 803 TI Stand With Accessories Lab
ITEM-44662
Metrohm 901 Titrando, 800 Dosino, and 803 TI Stand with Accessories
This system was removed from a university where it was surplus to requirements.
The system powers on and is in good working order. The 901 Titrando, 800 Dosino, and 803 TI Stand were tested with an in-house PC w/ software, and all components appeared to function as expected, including pH measurement, dosing, and stirring.
The PC used for testing is not included in the system.
The required software can be downloaded for free from the Metrohm website, but it will require a purchased licence after 30 days of use.
Included:
- Metrohm 901 Titrando
- Metrohm 800 Dosino
- Metrohm 803 TI Stand
- Control cable for PC interface
Specifications:
Model: 901 Titrando
Accessories: 800 Dosino and 803 TI Stand
Everything is in good cosmetic condition with some light signs of use.
NEW ITEM
NEW ITEM
£ 3,000.00 (ex. VAT) 1 in stock
LABCONCO 28-Port Manifold for Freeze-Dryer Lab
ITEM-49747
LABCONCO 28-Port Manifold for Freeze-Dryer
This item was removed from a facility where it was surplus to requirement.
The item is supplied in its original box, which has been opened, but the manifold remains inside the protective foam packaging.
It is essentially still sealed and in brand-new condition.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,000.00 (ex. VAT) 1 in stock
MMM Incucell V 222 Incubator Lab
ITEM-48768
MMM Incucell V 222 Incubator Lab
This item was removed from a facility where it was surplus to requirement.
The unit powers up and is in good working order.
It is in reasonably good cosmetic condition.
£ 3,000.00 (ex. VAT) 1 in stock
Singer Robot Model Rotor-HDA w/ Junair OF302-4S & Werther CW 100/24 AL Lab
ITEM-54784
Singer Robot Rotor-HDA w/ Junair OF302-4S & Werther CW 100/24 AL
This item was removed from a laboratory where it was surplus to requirement.
The compressor and pump are reported to be in working order. We are unable to test the full system further
The system consists of:
- Singer Robot Model Rotor-HDA
- Junair OF302-4S Compressor
- Werther CW 100/24 AL Unit
£ 3,000.00 (ex. VAT) 1 in stock
Jouan Refrigerated Trap RCT90 And Concentrator Evaporator RC 10.22. Lab
ITEM-45056
Jouan Refrigerated Trap And Concentrator Evaporator Lab
This system was removed from a university lab, where it was surplus to requirements.
All units are in good cosmetic condition and powered on. It's in good working order.
The system comprises the following:
- KNF Neuberger Pump
- Jouan RCT90 Cold Trap
- Jouan Type RC 10.22 Vacuum Concentrator Centrifuge
£ 3,000.00 (ex. VAT) 1 in stock
Perkin Elmer Janus AJM4G01 Standard Platform 4Tip & Gripper w/ PC & Software Lab
ITEM-47061
Perkin Elmer Janus AJM4G01 Standard Platform 4Tip & Gripper
This system was removed from a university laboratory where it was surplus to requirements.
The unit is in good used cosmetic condition. It powers on, initializes correctly, and has passed a random movement test. A video demonstrating its operation is available.
Further testing could not be conducted at our facility.
This system comprises the following:
- Perkin Elmer Janus with Varispan Arm & Gripper
- Part No: AJM4G01/AG
- Serial No: JA1616N1577
- Decks: 5084305 & 5086759
- Capacity: 24 tiles
- Perkin Elmer Peri Pump with Nalgene bottle
- Lenovo PC system including a keyboard, monitor, and mouse, running Windows 7 with Perkin Elmer Winprep software v4.10.0.54
- Full manual set
- Various software discs
- Numerous microplate holders
- Various parts for the waste system
Includes transport blocks for safe transport.
£ 3,000.00 (ex. VAT) 1 in stock
Leica RM2125RTF Rotary Microtome Lab
ITEM-48445
Leica RM2125RTF Microtome Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, with some surface scratches present.
It is in good mechanical order, we are unable to test it further at our facility.
£ 3,000.00 (ex. VAT) 1 in stock
Bright OTF/AS/EC 960841296 Cryostat Lab
ITEM-48728
Bright OTF/AS/EC 960841296 Cryostat Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition and in good working order.
Includes;
- Box of various parts
- 9 x Spare Blades
- 5 x Spare Smaller Blades
£ 3,000.00 (ex. VAT) 1 in stock
Affymetrix GeneChip™ Scanner 3000 7G with GeneChip 450 Fluidics Station
ITEM-50593
Affymetrix GeneChip™ Scanner 3000 7G with GeneChip 450 Fluidics Station
This system was removed from a university laboratory where it was surplus to requirements.
The GeneChip Scanner 3000 7G is in very good, clean cosmetic condition with minimal wear and powers on. No further functional testing has been carried out. The system includes the autoloader.
The GeneChip Fluidics Station 450 is likewise in very good, clean condition. It powers on, and all four dispenser screens illuminate correctly. Further testing could not be carried out at our facility.
Included Components:
Affymetrix GeneChip Scanner 3000 7G
Model: GeneChip Scanner 3000 7G
Serial Number: 54725350
Affymetrix Autoloader
Serial Number: A17260
Affymetrix GeneChip Fluidics Station 450
Serial Number: 60130820
Manufacture Date: August 2014
Accessories:
Affymetrix Qualification and Service Manual
£ 3,000.00 (ex. VAT) 1 in stock
VWR INCU-Line ILS6 Shaking Incubator Lab
ITEM-52593
VWR INCU-Line ILS6 Shaking Incubator Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order. We were informed it had only been used once prior to removal.
£ 3,000.00 (ex. VAT) 1 in stock
Foster and Freeman MVC 1000_D2 Fingerprint Fuming Cabinet w/ Accessories
ITEM-48659
Foster and Freeman MVC 1000_D2 Fingerprint Fuming Cabinet w/ Accessories
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and appears in good cosmetic condition, both externally and internally. The previous owner stated that it was in good working order when last serviced in July 2021 and has been in storage since.
They also noted that the humidity control was not sustaining low humidity during operation.
Includes:
- MVC1000_D2 Fingerprint Fuming Cabinet
- Meanwell Power Adapter
- Additional Shelving and Fixings
- 3x Boxes of Aluminium Foil Weighing Dishes
- 10x Bottles of Foster+Freeman Cyanobloom – Low Viscosity Cyanoacrylate
Model: MVC 1000_D2
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,000.00 (ex. VAT) 1 in stock
Sorvall RC 5B Plus Floor Standing Centrifuge w/ FiberLite F18-12x50. 18,000 RPM
ITEM-51779
Sorvall RC 5B Plus Floor Standing Centrifuge w/ FiberLite F18-12x50. 18,000 RPM
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 3,000.00 (ex. VAT) 1 in stock
SUEZ Select Analyst 320 Water Purification System with 100 L UV Tank
ITEM-58446
SUEZ Select Analyst 320 Water Purification System with 100 L UV Tank
This system is being offered for sale on behalf of a client due to being surplus to ongoing requirements at SASPiPhi Ltd.
The system is a SUEZ Select Analyst 320 laboratory water purification unit supplied with an external 100 L storage tank incorporating UV treatment, a wall-mounting bracket and a Grundfos delivery pump.
Equipment of this type is commonly used to produce and store purified laboratory water for analytical, general laboratory and process applications.
According to the client, the system was purchased in December 2021 and was working and in use up until it was placed into storage in early 2024.
Installation, sanitisation, replacement of consumables and verification of the resulting water quality will be the responsibility of the purchaser.
Included in sale:
SUEZ Select Analyst 320 water purification unit
Part number L300170
Serial number 35143
SUEZ 100 L external storage tank with UV
Part number L998411
Serial number 35155
Wall-mounting bracket
Part number L998405
Grundfos MQ3-35 pump
Associated hoses, cables and connections shown
Please note, replacement filters, cartridges, lamps, installation services, validation services or documentation not specifically listed above are not included.
The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.
£ 3,000.00 (ex. VAT) 1 in stock
Zhengzhou Protech Technology Stainless Glove Box Model - VGB-3
ITEM-55637
Zhengzhou Protech Technology Stainless Glove Box Model - VGB-3
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 3,000.00 (ex. VAT) 1 in stock
Miele G 7836 CD Glassware Washer
ITEM-54103
Miele G 7836 CD Glassware Washer
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 3,000.00 (ex. VAT) 1 in stock
Miele G 7836 CD Glassware Washer
ITEM-50121
Miele G 7836 CD Glassware Washer
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at or facility.
Include:
- 3 x Cleaning Racks (Various)
- Dishwasher Salt Holder
£ 3,000.00 (ex. VAT) 1 in stock
Silverson L5M-A Heavy Duty High Shear Laboratory Mixer Homogenizer
ITEM-58422
Silverson L5M-A Heavy Duty High Shear Laboratory Mixer Homogenizer
This equipment is being offered on behalf of a client, where it is now surplus to requirements.
The Silverson L5M-A is a heavy duty high shear laboratory mixer homogenizer suitable for laboratory-scale mixing, emulsifying, homogenising, disintegrating and dissolving applications.
The system is in good working condition.
The client has advised they can be flexible to assist with packaging for transport if required.
Includes;
1 x Silverson L5M-A Heavy Duty High Shear Laboratory Mixer Homogenizer
Specifications;
Serial number: 40684
Installed: March 2024
Last serviced: February 2026
Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.
£ 3,000.00 (ex. VAT) 1 in stock
Boxer 200/200LR Floorstanding Autoclave Lab
ITEM-48693
Boxer 200/200LR Floorstanding Autoclave Lab
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition and good working order.
Please note: The handle had previously broken but has since been repaired.
Model: 200/200LR
Includes;
- 2 x Keys
£ 3,000.00 (ex. VAT) 1 in stock
Perkin Elmer Janus JANUS Expanded Platform 8Tip & Gripper AJL8G01 Lab
ITEM-32009
Perkin Elmer Janus JANUS Expanded Platform 8Tip & Gripper AJL8G01 Lab
This system was removed from a university laboratory where it was surplus to requirements.
It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below:
The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. However, tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place.
There is no Software included with this system.
Specifications:
- Workstation Part No.: AJL8G01
- Workstation Serial No.: DG11073293
- Manufacture Date: November 2007
- Last Service: 01-12-2022
Accessories:
- Box of Plate Holders.
- Various Cables.
- 2 x Waste Bottles.
- Waste Bin
The system is in reasonable used cosmetic condition, with two hinges needing replacement.
£ 3,000.00 (ex. VAT) 1 in stock
Thermo Scientific 7405 CryoPlus 3 Storage System 340L
ITEM-54334
Thermo Scientific 7405 CryoPlus 3 Storage System 340L
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 03/04/2025
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,000.00 (ex. VAT) 1 in stock
Eppendorf 5810 R Centrifuge Lab
ITEM-55440
Eppendorf 5810 R Centrifuge Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Please note: There is no rotor included.
- Last Service: Nov 2024
£ 3,000.00 (ex. VAT) 1 in stock
Anglia Scientific Shandon AS 325 Microtome Lab
ITEM-53129
Anglia Scientific Shandon AS 325 Microtome Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Please note: This is battery powered and requires AA batteries.
£ 3,000.00 (ex. VAT) 1 in stock
Centurion Scientific PRO-RESEARCH.K244RFS Refrigerated Floor Standing Centrifuge
ITEM-58432
Centurion Scientific PRO-RESEARCH.K244RFS Refrigerated Floor Standing Centrifuge
This system is being offered on behalf of a client, where it is now surplus to requirements.
The Centurion Scientific PRO-RESEARCH.K244RFS is a high-capacity refrigerated laboratory centrifuge suitable for research, pharmaceutical, biotechnology and clinical laboratory applications.
The system is in working order.
The centrifuge is fitted with a 4-place swing-out rotor complete with four stainless steel buckets, making it suitable for processing larger sample volumes. The unit also features an integrated colour touchscreen controller and refrigerated cabinet for temperature-controlled centrifugation.
Cosmetically, the system presents well with only light signs of previous laboratory use consistent with its age.
The client has advised they cannot provide service history for this item.
The client has not confirmed whether they are able to package the system for transport. Buyers should make their own arrangements for suitable lifting equipment, palletisation, crating and transportation.
Includes;
1 x Centurion Scientific Refrigerated Floor Standing Centrifuge
1 x 4-place swing-out rotor
4 x Stainless steel buckets
Standing centrifuge logbook
Power lead
Specifications;
Manufacturer: Centurion Scientific
Model: PRO-RESEARCH.K244RFS
Type: Refrigerated Floor Standing Centrifuge
Integrated colour touchscreen controller
Swing-out rotor configuration
4-position rotor
Approximate Year of Purchase: 2019
£ 3,000.00 (ex. VAT) 1 in stock
Fujifilm Intelligent Dark Box II LAS-1000plus IDX2 Lab
ITEM-47825
Fujifilm Intelligent Dark Box II LAS-1000plus IDX2
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good condition with minimal wear.
In good cosmetic and mechanical condition.
Includes:
- Fujifilm Luminescent Image Analyzer LAS-1000 CC2
- 5-pin cable with male and female ends
- 3-pin cable with male and female ends
Model: LAS-1000plus IDX2
Serial No.: 0692261
Model (Analyzer): LAS-1000 CC2
Serial No.: 0682487
£ 3,000.00 (ex. VAT) 1 in stock
Covaris M220 Focused Ultrasonicator Lab
ITEM-41125
Covaris M220 Focused Ultrasonicator
This was removed from a university lab where it was surplus to requirements.
The system powers up and is in good working order. The laptop has Sonolab 7.2 software installed.
It is in good cosmetic condition with very minor marks.
£ 3,000.00 (ex. VAT) 1 in stock
Domnick Hunter 60H Hydrogen Generator Lab
ITEM-47824
Domnick Hunter 60H Hydrogen Generator
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
- Run Time - 123529
- AMP Hours - 255000
Includes;
- 60 497 0530 Filter Replacement Kit
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,990.00 (ex. VAT) 1 in stock
Eppendorf CryoCube F101h-86 Ultra Low Temperature Freezer Lab
ITEM-56224
Eppendorf CryoCube F101h-86 Ultra Low Temperature Freezer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 29/01/24
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,990.00 (ex. VAT) 1 in stock
PCHBI MCO-230AICUV-PE CO2 Incubator
ITEM-55241
PCHBI MCO-230AICUV-PE CO2 Incubator
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 20/03/2024
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,980.00 (ex. VAT) 1 in stock
PCHBI MCO-230AICUV-PE CO2 Incubator Lab
ITEM-55242
PCHBI MCO-230AICUV-PE CO2 Incubator Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 20/03/2024
£ 2,950.00 (ex. VAT) 1 in stock
Perkin Elmer Janus Automated Workstation w/ Purair Advanced Ductless Fume Hood
ITEM-32010
Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood
This system was removed from a university laboratory where it was surplus to requirements.
It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below:
The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. The X and Y rails, as well as the gripper Z worm drive, have been cleaned and lubricated. Tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place.
There is no Software included with this system.
The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning.
Specifications:
- Workstation Part No.: AJL8G01
- Workstation Serial No.: DG11118582
- Manufacture Date: November 2011
- Last Service: 06-12-2022
Fume Hood:
- Model: Purair P30
- Serial No.: P90786
- Internal Dimensions: L173 W109 H116 cm
- Last Service: 09/08/2022
Accessories:
- Box of Plate Holders.
- Various Cables.
- 2 x Waste Bottles.
- Waste Bin
The system is in reasonable used cosmetic condition.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,900.00 (ex. VAT) 1 in stock
Panasonic MCO-170AICUVH-PE IncuSafe CO2 Incubator Lab
ITEM-51277
Panasonic MCO-170AICUVH-PE IncuSafe CO2 Incubator Lab
This item was removed from a facility where it was surplus to requirement.
The unit powers up and is in good working order.
It is in very good cosmetic condition.
Last Service Date: 15/04/2025
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,850.00 (ex. VAT) 1 in stock
Faster SafeFAST Classic 215 D Class II Biological Safety Cabinet Lab
ITEM-55243
Faster SafeFAST Classic 215 D Class II Biological Safety Cabinet Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 31/05/2024
£ 2,825.00 (ex. VAT) 1 in stock
Peltier Stack 2DW for GERSTEL MPS Robotic Series/PAL3 - Refurbished Lab
ITEM-49522
Peltier Stack 2DW for GERSTEL MPS Robotic Series/PAL3 – Refurbished Lab
This item is sold on behalf of a client where it was surplus to requirements.
This item was recently refurbished to a like-new condition.
Serial No.: 466524
MPN: 100100-037-NS
Includes:
- Power supply
- UK C13 cables
- Two racks for 54 × 2 mL vials
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
£ 2,800.00 (ex. VAT) 1 in stock
Leica ST 4040 Linear Automatic Stainer Lab
ITEM-53271
Leica ST 4040 Linear Automatic Stainer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 2,800.00 (ex. VAT) 1 in stock
Gilson PipetmaX 268 Liquid Handler Automated Pipetting System Lab
ITEM-43145
Gilson PipetmaX 268 Liquid Handler Automated Pipetting System
This item was removed from a university where it was surplus to requirements.
It is in good cosmetic condition and powers on. We are unable to test its functionality further at our facility.
Model: 32100000
Serial Number: 321G4A035
Included Accessories:
- ETA-USA AC adapter power supply
- Gilson Trilution Micro Protocol Builder 1.0.34.0 (Windows 7 Professional) – Disc
USB Drives:
- LT3204USB PipetMax Docs V2 Reference Docs 1.1
- LT3203USB Trilution Micro V2 Documentation V1.3
£ 2,800.00 (ex. VAT) 1 in stock
Instron SFL 2000K Furnace & Controller Lab
ITEM-55067
Instron SFL 2000K Furnace & Controller Lab
This item was removed from a facility where it was surplus to requirement.
The controller powers on, we are unable to test the furnace at our facility.
The previous onwner stated it was in working order prior to removal.
£ 2,750.00 (ex. VAT) 1 in stock
PHCBI CO2 Incubator Model MCO-170AIC-PE Lab
ITEM-41811
PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in very good cosmetic condition internally and externally.
£ 2,550.00 (ex. VAT) 1 in stock
Taylor Wharton K Series Model 10K Cryostat Storage System w/ PSU Connecting Unit
ITEM-48804
Taylor Wharton K Series 10K Cryostat Storage System w/ CryoScience PSU Connecting Unit
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on.
The previous owner stated it is in complete working order.
Included;
- CryoScience Power Supply Connecting Unit M507CE
NEW ITEM
NEW ITEM
£ 2,500.00 (ex. VAT) 1 in stock
MGISP-960 High-Throughput Automated Sample Preparation System
ITEM-48946
MGISP-960 High-Throughput Automated Sample Preparation System
This system was removed from a facility where it was surplus to requirement.
It is brand new with its original packaging.
Please note; There is no PC or software included.
£ 2,500.00 (ex. VAT) 1 in stock
LAUDA PROLINE RP 855 CX Refrigerated Chiller Lab
ITEM-52502
LAUDA PROLINE RP 855 CX Refrigerated Chiller Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 2,500.00 (ex. VAT) 1 in stock
SpectrumLabs KrosFlo KR2i TFF System w/ Masterflex Easyload-3
ITEM-56231
SpectrumLabs KrosFlo KR2i TFF System w/ Masterflex Easyload-3
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,500.00 (ex. VAT) 1 in stock
Sorvall RC-5B Refrigerated Superspeed Centrifuge w/ SLA-1500 Rotor 15000RPM
ITEM-51780
Sorvall RC-5B Refrigerated Superspeed Centrifuge w/ SLA-1500 Rotor 15000RPM
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Please note: The plastic collar used to adjust the blue temperature set-point needle has broken. As a result, the brass adjustment shaft beneath must be turned directly to set the temperature. The temperature control remains fully functional.
£ 2,500.00 (ex. VAT) 1 in stock
Sakura Tissuetek DRS 2000 Automatic Slide Stainer Lab
ITEM-50122
Sakura Tissuetek DRS 2000 Automatic Slide Stainer Lab
This system was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition and powers on.
During testing we were able to perform a saved method 'Engineer Test', we are unable to test it further at our facility.
£ 2,500.00 (ex. VAT) 1 in stock
High & Low Temperature Circulating Device UHC-10/-20+200 Lab
ITEM-48949
High & Low Temperature Circulating Device UHC-10/-20+200 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The previous owner confirmed it is in complete working order having been flushed with cleaning fluid before being put to storage.
Items 201 to 250 of 1515