General Laboratory

£ 4,000.00 (ex. VAT) 1 in stock

Shandon Citadel 2000 Tissue Processor Lab

ITEM-50161

Shandon Citadel 2000 Tissue Processor Lab

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

£ 4,000.00 (ex. VAT) 1 in stock

Qiagen BioRobot 8000 Molecular Biology Workstation System w/ Software Lab

ITEM-54848

Qiagen BioRobot 8000 Molecular Biology Workstation System w/ Software Lab

This system was removed from a facility where it was surplus to requirement.

It powers on and communicates with the software, we are unable to test it further at our facility.

Please note: The monitor is not included.

Includes various accessories as shown.

£ 4,000.00 (ex. VAT) 1 in stock

Supertech Instruments Stable Active Pneumatic Vibration Isolation Table Imperial

ITEM-55360

Supertech Instruments STable Active Pneumatic Vibration Isolation Table

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

SUPETECH Quiet Air Compressor

£ 4,000.00 (ex. VAT) 1 in stock

Tuttnauer 5050ELV-D Floor-Standing Autoclave

ITEM-52755

Tuttnauer 5050ELV-D Floor-Standing Autoclave

This item was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition with typical signs of previous laboratory use. It powers on, however we are unable to test the system further at our facility.

An engineer tested the unit before it was removed and believes it is in good working order.

To service and operate the system, the following utilities are required:

Compressed air supply
Mains water supply
Softened water supply

£ 4,000.00 (ex. VAT) 1 in stock

Gilson GX-271 Liquid Handler and PC w/ Biotage Controller and Editor Software

ITEM-54151

Gilson GX-271 Liquid Handler and PC w/ Biotage Controller and Editor Software

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

The laptop is installed with Biotage Controller and Editor software, which allows control of the GX-271 needle. Please note, the software may display a COM1 connection error due to missing external components (not included).

For standalone use, the GX-271 is better suited to Gilson TRILUTION® LC or TRILUTION® LH software.

£ 4,000.00 (ex. VAT) 1 in stock

Redd & Whyte Preddator Liquid Robotic Handler Lab - No Software Included

ITEM-42833

Redd & Whyte Preddator Liquid Robotic Handler

This system was removed from a facility where it was surplus to requirements.

It is in excellent cosmetic condition. No further testing has been carried out, however, the previous owner confirmed it was working when last used.

Please note; Laptop and software are not included.

Includes:

Redd & Whyte Preddator Liquid Robotic Handler
1 x Data cable
1 x 1.5 metre plastic tubing

Serial No.: 1040

Model No.: [Not specified]

£ 4,000.00 (ex. VAT) 1 in stock

ATC K9 Applied Thermal Control Recirculating Chiller Lab

ITEM-51322

ATC K9 Applied Thermal Control Recirculating Chiller Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

RECERTIFIED ITEM

£ 3,800.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 SHKE6000-1CE Shaking Incubator

ITEM-48772

Thermo Scientific MaxQ 6000 SHKE6000-1CE Shaking Incubator

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

The unit has been converted from a non-refrigerated model to a refrigerated model and then back again, which explains some of the cosmetic eccentricities.

It is in good cosmetic condition.

£ 3,750.00 (ex. VAT) 1 in stock

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

ITEM-55839

Bright Model OTF5000 Cryostat w/ 2x Cryo-m-bed, 2 x Object Holders & Blade

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 3,700.00 (ex. VAT) 1 in stock

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

ITEM-55838

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: The ‘Bright’ sticker on the front of the unit is loose.

£ 3,650.00 (ex. VAT) 1 in stock

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

ITEM-55835

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 3,600.00 (ex. VAT) 1 in stock

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

ITEM-55837

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: A replacement timer has been fitted upside down. There is also paint peeling from the base, and the knife block does not have an angle adjuster.

£ 3,550.00 (ex. VAT) 1 in stock

New Brunswick Scientific Ultra Low Temperature Chest Freezer Model C760-86 Lab

ITEM-47537

New Brunswick Scientific Ultra Low Temperature Freezer -80C Model C760-86 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

£ 3,550.00 (ex. VAT) 1 in stock

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

ITEM-55834

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 3,500.00 (ex. VAT) 1 in stock

BioNex Nanodrop W/ NS-2 Stage & UVR-M Chamber System Lab

ITEM-48511

BioNex Nanodrop W/ NS-2 Stage & UVR-M Chamber System Lab

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, we are unable to test it further at our facility.

Includes:

UVR-M Chamber
Nanodrop
NS-2 Stage
2 x Honeywell Burdick and Jackson bottles
Gilson 11727IN Nanobuilder Software disk
Various cables
Various Nanodrop parts and accessories

£ 3,500.00 (ex. VAT) 1 in stock

Binder CB 170 CO2 Incubator (2021) Lab

ITEM-47359

Binder CB 170 CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

£ 3,500.00 (ex. VAT) 1 in stock

Gilson Pipettes – 42 Units (6 Stands of 7) Adjustable Volume P2–P5000

ITEM-54607

Gilson Pipettes – 42 Units (6 Stands of 7) Adjustable Volume P2–P5000

This equipment is being offered for sale on behalf of a client due to being surplus to requirements.

This lot consists of 42 Gilson adjustable-volume, single-channel pipettes supplied across 6 complete stands (7 pipettes per stand). The set covers a full range of commonly used volumes including P2, P10, P20, P100, P200, P1000, and P5000, making it suitable for a wide range of laboratory applications including molecular biology, chemistry, and general lab workflows.

Gilson pipettes are widely regarded for their precision, durability, and reproducibility, making them a standard choice in research, clinical, and industrial laboratory environments.

According to the client, all pipettes are in good used condition and have been well maintained. Please note that the pipettes are not currently calibrated, and buyers should factor calibration into commissioning prior to use where required.

Included in sale:

42 × Gilson single-channel pipettes
Volume ranges included: P2, P10, P20, P100, P200, P1000, P5000

6 × pipette stands (each holding 7 pipettes)

Please note, any additional accessories, services or documentation not specifically listed above are not included.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

£ 3,500.00 (ex. VAT) 1 in stock

Thermo Scientific Megafuge ST1 Plus Centrifuge with TX-400 Accessories

ITEM-58423

Thermo Scientific Megafuge ST1 Plus Centrifuge with TX-400 Accessories

This equipment is being offered on behalf of a client, where it is now surplus to requirements.

The Thermo Scientific Megafuge ST1 Plus is a benchtop centrifuge suitable for routine laboratory sample preparation and centrifugation workflows.

The system is supplied with associated Thermo Scientific TX-400 rotor accessories, buckets and adapters.

The system is in good working condition.

The client has advised they can be flexible to assist with packaging for transport if required.

Includes;

1 x Thermo Scientific Megafuge ST1 Plus, 120–240V, 50/60Hz

4 x Centrifuge bucket adapters

4 x Thermo Scientific round buckets

Thermo Scientific TX-400 rotor adapters

Specifications;

Serial number: 43181611

Installed: July 2023

Last serviced: November 2025

Service type: Calibration and service by Ellab

Power supply: 120–240V, 50/60Hz

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave Benchtop Autoclave PS/MVA/C40 with Tactrol 2 Display

ITEM-52578

Priorclave Tactrol 2 Autoclave

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 27/6/24

£ 3,500.00 (ex. VAT) 1 in stock

Thermo Scientific S52-ST Swinging Bucket Rotor 52000rpm 4 x 5ml Lab

ITEM-40022

Thermo Scientific S52-ST Swinging Bucket Rotor 52000rpm 4 x 5ml Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

Rotor: S52-ST (52K RPM)
Buckets: 4 x 5ml (0134)

£ 3,500.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45128

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 1861
M24 Controller

£ 3,500.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45129

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 2295
M24 Controller

£ 3,500.00 (ex. VAT) 1 in stock

Sorvall Discovery 100SE Ultracentrifuge - No Rotor Included Lab

ITEM-47424

Sorvall Discovery 100SE Ultracentrifuge - No Rotor Included Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

It was tested using a Sorvall A1256 rotor (Not included.)

£ 3,500.00 (ex. VAT) 1 in stock

Beckman Biomek FXP System with Accessories, Newport Isolation Table Lab

ITEM-49525

Beckman Biomek FXP System with Accessories, Newport Isolation Tables, and Consumables

This item is sold on behalf of a client where it is surplus to requirements.

This system is in complete working order, and in good cosmetic condition.

The system comprises the following:

Beckman Coulter Biomek FXP liquid handling system (model FXP-578831) – unassembled
Two anti-vibration tables
Thermo Scientific Cytomat Microplate Hotel (model 622855)
FluidX XSD-96 Pro
Various tip consumables (20–30)
Some components already packaged in bubble wrap from previous relocation

The system was last in known working condition approximately two years ago at the previous institution before being packed for transport. It has not been assembled or tested since relocation and is currently stored in a disassembled state.

Includes:

Beckman Coulter Biomek FXP (FXP-578831)
Two anti-vibration tables
Thermo Scientific Cytomat Microplate Hotel (622855)
FluidX XSD-96 Pro
Tip consumables (20–30)

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 3,500.00 (ex. VAT) 1 in stock

Bigneat Robotics Enclosure Cabinet Class 2 RB3200/01 Lab

ITEM-42797

Bigneat Robotics Enclosure Cabinet RB3200/01

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition and in good working order.

Please Note; This item will require reassembling and recommissioning once purchased.

Includes:

LAC2 Class II type airflow system
Integrated Ergotron PC and monitor arm
Eight fitted castors for mobility
Two lower storage compartments (110 x 100 x 57cm each)
Opening window aperture (218 x 110cm) for equipment access

Specifications:

Airflow: > 0.4m/s
Downflow air changes per hour: 0.25 - 0.5
External dimensions: 320 x 118 x 240cm (l x w x h)
Internal cabinet dimensions: 317 x 115 x 115cm (l x w x h)
Running hours since last service: 134.1

Model: RB3200/01

Serial No.: 66166/RB3200

Year: 2007

£ 3,500.00 (ex. VAT) 1 in stock

Thermo Scientific Savant SPD1010 SpeedVac Concentrator Lab

ITEM-50130

Thermo Scientific Savant SPD1010 SpeedVac Concentrator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: During testing, it was noted that the unit takes longer than expected to pull vacuum.

£ 3,500.00 (ex. VAT) 1 in stock

Esco Labor Model EL3 Dual Agitated Vacuum Laboratory One-Pot Homogeniser

ITEM-50215

Esco Labor Model EL3 Dual Agitated Vacuum Laboratory One-Pot Homogeniser

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition. The unit cannot be powered on as the control panel is not included, and it has not been PAT tested for this reason. The previous owner stated that it was in working order prior to removal.

Model: EL3

£ 3,500.00 (ex. VAT) 1 in stock

Caliper LifeSciences Sciclone G3 / G3T Liquid Handler System

ITEM-52429

Caliper LifeSciences Sciclone G3 / G3T Liquid Handler System

This system was removed from a facility where it was surplus to requirement.

It powers on with no faults noted.

Inheco Multi Tech Control
Model - Multi Tech Control
S/N - 2084

Accessories

HP PC
Broken HP Monitor

Also comes with 3 USBs:

2 x Maestro 6.3
1 x Inheco Backup

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Infors HT Multitron Shaking Incubator Lab

ITEM-53827

Infors HT Multitron Shaking Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 17/11/2025

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab

ITEM-37997

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included). It has been fully CO2 and temperature tested.

It is in excellent condition internally and externally.

This item features the following:

4 x shelves: 47 x 45

1 x Stainless Humidity Water Pan: 44 x 25 x 7cm

£ 3,500.00 (ex. VAT) 1 in stock

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

ITEM-55836

Bright Model OTF5000 Cryostat w/ 2 x Cryo-m-bed, 2 x Object Holders & Blade

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

RECERTIFIED ITEM

£ 3,330.00 (ex. VAT) 1 in stock

Thermo Scientific MSC 1.2 Class II Safety Cabinet Lab

ITEM-50814

Thermo Scientific MSC 1.2 Class II Safety Cabinet Lab

This item was removed from a facility where it was surplus to requirement.

It is very good cosmetic condition and in good working order.

Last Service Date: Feb 2025

External dimensions (W × D × H): 1,380 mm × 795 mm × 1,460 mm
Internal work area dimensions (W × D × H): 1,200 mm × 600 mm × 780 mm
Working height (recommended work surface height from floor, on stand): 900 mm

Please note: There is no UV bulb fitted.

RECERTIFIED ITEM

£ 3,320.00 (ex. VAT) 1 in stock

Thermo Scientific MSC 1.2 Class II Safety Cabinet Lab

ITEM-50815

Thermo Scientific MSC 1.2 Class II Safety Cabinet Lab

This item was removed from a facility where it was surplus to requirement.

It is very good cosmetic condition and in good working order.

Last Service Date: Feb 2025

External dimensions (W × D × H): 1,380 mm × 795 mm × 1,460 mm
Internal work area dimensions (W × D × H): 1,200 mm × 600 mm × 780 mm
Working height (recommended work surface height from floor, on stand): 900 mm

£ 3,310.00 (ex. VAT) 1 in stock

Thermo Scientific MSC-Advantage Class 2 Biological Safety Cabinet Type MSC 1.2

ITEM-43057

Thermo Scientific MSC-Advantage Class 2 Biological Safety Cabinet Type MSC 1.2 (2017)

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in complete working order. (Socket tester not included.)

Specifications;

Model - MSC 1.2
S/N - 420677754
Working Volume 1200 x 780 x 465 mm

£ 3,300.00 (ex. VAT) 1 in stock

Thermo Scientific MSC-Advantage MSC 1.2 Class 2 Microbiological Safety Cabinet

ITEM-55601

Thermo Scientific MSC-Advantage MSC 1.2 Class 2 Microbiological Safety Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 22/12/2025

£ 3,250.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AIC-PE Lab

ITEM-41811

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

£ 3,250.00 (ex. VAT) 1 in stock

Thermo Scientific MSC-Advantage MSC 1.2 Class 2 Microbiological Safety Cabinet

ITEM-55600

Thermo Scientific MSC-Advantage MSC 1.2 Class 2 Microbiological Safety Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 22/12/2025

£ 3,100.00 (ex. VAT) 1 in stock

Covaris M220 Focused Ultrasonicator Lab

ITEM-45430

Covaris M220 Focused Ultrasonicator

This system was removed from a university where it was surplus to requirements.

The system powers on and is in good cosmetic condition. The included laptop powers on and has Sonolab 7.2 software installed.

No further testing was carried out.

Specifications:

Model: Covaris M220
Serial No.: 002382

Included:

Covaris miniTUBE Clear 1.5–2.5kb (25)
Covaris miniTUBE Red 5.0kb (25)
Covaris miniTUBE Red 3.0kb (25)
7 x MicroTube (6x16mm) AFA Fiber with Snap-Cap (25)
1 x miniTUBE Prep Station & Stand
1 x MicroTube (6x16mm) AFA Fiber with Screw-Cap (25)
1 x microTUBE Prep Station
1 x M220 Fill & Drain Accessory Kit
M220 Swab Cleaning Kit (10)
1 x 500301 microTUBE
1 x 500358 microTUBE
Manual

£ 3,050.00 (ex. VAT) 1 in stock

Covaris M220 Focused-Ultrasonicator w/ Notebook & SonoLab 7.1 Software Lab

ITEM-51372

Covaris M220 Focused-Ultrasonicator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

During testing it successfully paired with the included PC & Software.

The previous owner stated it was in working order prior to removal.

Includes;

HP Pavilion dm1 Notebook PC w/ SonoLab 7.1 Software

RECERTIFIED ITEM

£ 3,000.00 (ex. VAT) 1 in stock

PCHBI MCO-230AICUV-PE CO2 Incubator (2022) Lab

ITEM-55865

PCHBI MCO-230AICUV-PE CO2 Incubator

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 20/03/2024

£ 3,000.00 (ex. VAT) 1 in stock

Zhengzhou Protech Technology Stainless Glove Box Model - VGB-3

ITEM-55637

Zhengzhou Protech Technology Stainless Glove Box Model - VGB-3

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 3,000.00 (ex. VAT) 1 in stock

Foster and Freeman MVC 1000_D2 Fingerprint Fuming Cabinet w/ Accessories

ITEM-48659

Foster and Freeman MVC 1000_D2 Fingerprint Fuming Cabinet w/ Accessories

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and appears in good cosmetic condition, both externally and internally. The previous owner stated that it was in good working order when last serviced in July 2021 and has been in storage since.

They also noted that the humidity control was not sustaining low humidity during operation.

Includes:

MVC1000_D2 Fingerprint Fuming Cabinet
Meanwell Power Adapter
Additional Shelving and Fixings
3x Boxes of Aluminium Foil Weighing Dishes
10x Bottles of Foster+Freeman Cyanobloom – Low Viscosity Cyanoacrylate

Model: MVC 1000_D2

£ 3,000.00 (ex. VAT) 1 in stock

Perkin Elmer Janus AJM4G01 Standard Platform 4Tip & Gripper w/ PC & Software Lab

ITEM-47061

Perkin Elmer Janus AJM4G01 Standard Platform 4Tip & Gripper

This system was removed from a university laboratory where it was surplus to requirements.

The unit is in good used cosmetic condition. It powers on, initializes correctly, and has passed a random movement test. A video demonstrating its operation is available.

Further testing could not be conducted at our facility.

This system comprises the following:

Perkin Elmer Janus with Varispan Arm & Gripper
Part No: AJM4G01/AG
Serial No: JA1616N1577
Decks: 5084305 & 5086759
Capacity: 24 tiles
Perkin Elmer Peri Pump with Nalgene bottle
Lenovo PC system including a keyboard, monitor, and mouse, running Windows 7 with Perkin Elmer Winprep software v4.10.0.54
Full manual set
Various software discs
Numerous microplate holders
Various parts for the waste system

Includes transport blocks for safe transport.

£ 3,000.00 (ex. VAT) 1 in stock

Jouan Refrigerated Trap RCT90 And Concentrator Evaporator RC 10.22. Lab

ITEM-45056

Jouan Refrigerated Trap And Concentrator Evaporator Lab

This system was removed from a university lab, where it was surplus to requirements.

All units are in good cosmetic condition and powered on. It's in good working order.

The system comprises the following:

KNF Neuberger Pump
Jouan RCT90 Cold Trap
Jouan Type RC 10.22 Vacuum Concentrator Centrifuge

£ 3,000.00 (ex. VAT) 1 in stock

Centurion Scientific PRO-RESEARCH.K244RFS Refrigerated Floor Standing Centrifuge

ITEM-58432

Centurion Scientific PRO-RESEARCH.K244RFS Refrigerated Floor Standing Centrifuge

This system is being offered on behalf of a client, where it is now surplus to requirements.

The Centurion Scientific PRO-RESEARCH.K244RFS is a high-capacity refrigerated laboratory centrifuge suitable for research, pharmaceutical, biotechnology and clinical laboratory applications.

The system is in working order.

The centrifuge is fitted with a 4-place swing-out rotor complete with four stainless steel buckets, making it suitable for processing larger sample volumes. The unit also features an integrated colour touchscreen controller and refrigerated cabinet for temperature-controlled centrifugation.

Cosmetically, the system presents well with only light signs of previous laboratory use consistent with its age.

The client has advised they cannot provide service history for this item.

The client has not confirmed whether they are able to package the system for transport. Buyers should make their own arrangements for suitable lifting equipment, palletisation, crating and transportation.

Includes;

1 x Centurion Scientific Refrigerated Floor Standing Centrifuge

1 x 4-place swing-out rotor

4 x Stainless steel buckets

Standing centrifuge logbook

Power lead

Specifications;

Manufacturer: Centurion Scientific

Model: PRO-RESEARCH.K244RFS

Type: Refrigerated Floor Standing Centrifuge

Integrated colour touchscreen controller

Swing-out rotor configuration

4-position rotor

Approximate Year of Purchase: 2019

£ 3,000.00 (ex. VAT) 1 in stock

Nuaire NU-S425-500E Series SP65 Class 2 Biological Safety Cabinet Lab

ITEM-54912

Nuaire NU-S425-500E Series SP65 Class 2 Biological Safety Cabinet Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 14/08/2024

£ 3,000.00 (ex. VAT) 1 in stock

Miele G 7836 CD Glassware Washer

ITEM-54103

Miele G 7836 CD Glassware Washer

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 3,000.00 (ex. VAT) 1 in stock

Miele G 7836 CD Glassware Washer

ITEM-50121

Miele G 7836 CD Glassware Washer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at or facility.

Include:

3 x Cleaning Racks (Various)
Dishwasher Salt Holder

£ 3,000.00 (ex. VAT) 1 in stock

Silverson L5M-A Heavy Duty High Shear Laboratory Mixer Homogenizer

ITEM-58422

Silverson L5M-A Heavy Duty High Shear Laboratory Mixer Homogenizer

This equipment is being offered on behalf of a client, where it is now surplus to requirements.

The Silverson L5M-A is a heavy duty high shear laboratory mixer homogenizer suitable for laboratory-scale mixing, emulsifying, homogenising, disintegrating and dissolving applications.

The system is in good working condition.

The client has advised they can be flexible to assist with packaging for transport if required.

Includes;

1 x Silverson L5M-A Heavy Duty High Shear Laboratory Mixer Homogenizer

Specifications;

Serial number: 40684

Installed: March 2024

Last serviced: February 2026

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

£ 3,000.00 (ex. VAT) 1 in stock

ILS 1800W/K Walk-in Fume Cupboard 1800mm (W) x 900mm (D) x 2400mm (H)

ITEM-52757

ILS 1800W/K Walk-in Fume Cupboard – 1800mm (W) x 900mm (D) x 2400mm (H)

This unit was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and reported to be in good working order prior to disassembly.

The unit has been fully dismantled and would need to be reassembled.

Specification:

Overall dimensions: 1800mm (W) x 900mm (D) x 2400mm (H)

Double split opening doors
Type tested to BS EN 14175 at 0.30m/sec, 0.35m/sec, 0.40m/sec, and 0.50m/sec
Inner chamber: 6mm Trespa TopLab BASE (Polypropylene and stainless steel options available)
High-performance removable rear baffles for maintenance access
Removable service panel (taps, sockets, alarm panel access)
Removable front by-pass grille
Low-energy light fitting with front-mounted switch
2 x MK double switched socket outlets
TEL AFA tactile and digital fully programmable airflow monitor/alarm panel with VAV control option