All Products

MTI Corp High Temp Furnace GSL-1700X-IIII w/ EQ-VBS-M1-LD & GSL-LCD-3Z

This item is sold on behalf of a client where it will be removed from a University Lab where it is surplus to requirements.

This system is New and Unused.

Includes:

• High Temp Furnace GSL-1700X- III
• Gas Mixing System GSL-LCD-3Z
• Vacuum Station EQ-VBS-M1-LD
• Various User Manuals

It is available for collection from Bath, UK.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

IPX5 / IPX6 Strong Water Spray Test Chamber, 1400L

This system is being offered for sale on behalf of a client due to being surplus to ongoing requirements at The National Robotarium, Edinburgh.

The unit is an IPX5 / IPX6 strong water spray test chamber with a 1400L test volume, designed for ingress protection testing using strong water jets in line with IP waterproof test procedures. Systems of this type are used for product and component validation across electronics, automotive, industrial and R&D environments where repeatable water spray exposure testing is required.

According to the client, the chamber is in very good used condition and close to new in appearance and working order. It was rarely used between 2022 and 2026, with fewer than 20 recorded uses, and no issues or faults logged during ownership. The client has advised that the unit has not been recalibrated since original purchase, however no loss of calibration has been identified. Routine internal maintenance, including replacement of water and cleaning of the water container, has been carried out in line with the user manual. No external maintenance record is available.

Native onboard software supplied with the chamber is included. Videos of the system in operation are available on request.

Included in sale:

• IPX5 / IPX6 strong water spray test chamber, 1400L
• Hose
• IP rated plug
• Native onboard supplier software
• User manuals

Please note, any additional accessories, services or documentation not specifically listed above are not included.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Agilent 7890A GC System with 5975C Inert MSD

This system was removed from a facility where it was surplus to requirements.

Both units are in good cosmetic condition and power on. We are unable to test them further at our facility.

Included Components:

Agilent 7890A Gas Chromatograph

• Serial Number: CN10752077

Agilent 5975C Inert Mass Selective Detector (MSD)

• Serial Number: US74828029

Leybold Univex 450 Electron Beam Evaporator System w/ Control Unit Lab

This system was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition, we are unable to test it at our facility.

The previous owner advised that the system was in working order prior to decommissioning; however, it will require some work to return it to operational condition.

Please note the following cosmetic condition points:

Front/side panel unstable: one panel is missing a screw (not available), so it does not secure properly.

Rear panel: cannot be refitted due to cables/wiring protruding.

Chamber support/leg: insecure and wobbly/unstable (appears to be held with an elastic band).

The system comprises;

• Leybold Univex 450 Electron Beam Evaporator System
• Leybold Control Unit
• Klockner-Moeller power unit

Perkin Elmer Clarus 500 GC-MS System with Clarus 560 MS, PC & Edwards RV3 Pump

This system was removed from a facility where it was surplus to requirement.

The previous owner has advised that the system was in good working order prior to removal in September 2025, with the last service carried out in June 2024.

• Clarus 500 GC N6519101 S/N 650S10012503
• Clarus 560 MS N6658627 S/N 664N0011304
• Lenovo PC w/ Dell Monitor and keyboard/mouse (comes with TurboMass V 5.4.2.1617 software pre-installed)
• Edwards RV3 Pump S/N 139509239
• Various disk guides

Taylor-Wharton LABS-40K Liquid Nitrogen Cryogenic Storage Tank

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition, and remains untested.

The previous owner stated it is in working order.

Dimensions;

• External length (cm) 125
• External width (cm)117
• External height (cm) 144

• 417 kg

LakeShore Cryotronics EM7-HV Magnet with Control Unit

This system was decommissioned and removed from a university laboratory where it was surplus to requirements.

While the units have not been powered on, the previous owner has stated they were working prior to removal.

The system is in very good cosmetic condition.

Includes:

• LakeShore Cryotronics EM7-HV Magnet S/N- 651-514A REV A -1564
• LakeShore Model 648 Electromagnet Power Supply (serial number not available)
• Spare parts and adapters

LakeShore Cryotronics EM7-HV Magnet with Control Unit

This system was decommissioned and removed from a university laboratory where it was surplus to requirements.

While the units have not been powered on, the previous owner has stated they were working prior to removal.

The system is in very good cosmetic condition.

Includes:

• LakeShore Cryotronics EM7-HV Magnet (S/N: 651-514A, REV A -1563)
• LakeShore Model 648 Electromagnet Power Supply (serial number not available)
• Spare parts and adapters

LakeShore Cryotronics EM7-HV Magnet with Control Unit

This system was decommissioned and removed from a university laboratory where it was surplus to requirements.

While the units have not been powered on, the previous owner has stated they were working prior to removal.

The system is in very good cosmetic condition.

Includes:

• LakeShore Cryotronics EM7-HV Magnet S/N- 651-514  REV A -1567
• LakeShore Model 648 Electromagnet Power Supply (serial number not available)
• Spare parts and adapters

GE Healthcare / Cytiva S-2000 Sefia Cell Processing Unit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Working when previously in use, password protected by Cytiva so cannot be tested by ourselves, reset through Cytiva will be required by next user, this cannot be done pre-sale as it will form part of the servicing contract agreement. Cytiva are happy to do this post-sale.

LakeShore Cryotronics EM7-HV Magnet with Control Unit

This system was decommissioned and removed from a university laboratory where it was surplus to requirements.

While the units have not been powered on, the previous owner has stated they were working prior to removal.

The system is in very good cosmetic condition.

Includes:

• LakeShore Cryotonics EM7-HV Magnet (S/N: 651-514A, REV A -1565)
• LakeShore Model 648 Electromagnet Power Supply (serial number not available)
• Spare parts and adapters

Stylcam 200R High Speed Rotary Press Simulator System w/ PC & Software Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with all units powered on, we are unable to test it further at our facility.

This system includes a PC set-up with the following software installed:

• Analis 2.01.16 Version

This system cannot be exported and the eventual buyer will be subject to a disclaimer.

GE Healthcare / Cytiva S-2000 Sefia Cell Processing Unit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Working when previously in use, password protected by Cytiva so cannot be tested by ourselves, reset through Cytiva will be required by next user, this cannot be done pre-sale as it will form part of the servicing contract agreement. Cytiva are happy to do this post-sale.

GE Healthcare / Cytiva S-2000 Sefia Cell Processing Unit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Working when previously in use, password protected by Cytiva so cannot be tested by ourselves, reset through Cytiva will be required by next user, this cannot be done pre-sale as it will form part of the servicing contract agreement. Cytiva are happy to do this post-sale.

Last calibration 12.01.23

Zheda Dixun DX-Reader Protein Chip Reader REF DX-C1

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Lodha Rapid Mixer Granulator 50 LTRS – Model LI-RMG 50/25

This system was removed from a university where it was surplus to requirement.

This unit was purchased in 2020 for a scale-up project that did not progress and is now being offered for sale as surplus equipment.

The machine is unused and remains in its original packaging, currently stored in a GMP equipment storage room.

• Model: LI-RMG 50/25
• Serial No: 01492020

Included accessories:

• Spare larger mixing chamber
• Blue toolbox with Allen key set and 2 screwdrivers
• Pneumatic Y-type control valve (Min pressure: 50 PSI / Max pressure: 12 BAR)

Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS System with Peak Scientific Nitrogen Generator

This system was removed from a university lab where it was surplus to requirements.

The system is in very good cosmetic condition. It powered on, with the 3200 Q Trap and nitrogen generator functioning as expected. The Varian vacuum pump is also in good working order, no further testing was carried out.

The previous client stated that this system was in full working order prior to removal.

The system comprises:

• Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS
• Assembly No.: 1007440
• Serial No.: AF012360607

• Peak Scientific Instruments Nitrogen Generator
• Model No.: NM20ZA
• Serial No.: J06-06-06
• Running hours: 13,096

• Varian DS602 Vacuum Pump
• Model: 949-9335S001
• Serial No.: 238954
• Fitted with oil mist filter EMF20 Code A46229000

• 2 x Sciex power supply units (Assembly No. 014179, Serial Nos. 15470210, 120985175)
• 2 x Honeywell 9" black and white monitors (Model HMM9, Serial Nos. H321000214, H321000065)

• Lenovo MS PRO PC
• Type 2561
• Serial No.: ES10392192
• Loaded with Applied Biosystems Analyst v1.4.2, National Instruments Measurement & Automation Explorer v4.2.1, Chromeleon 6.8, and 3200 QTrap software

• Dell Monitor
• Serial No.: CN-OUW191-71618-812-ALAB

• Lenovo wireless keyboard and mouse
• Serial No.: 201209008012

Included Manuals:

• 3200 QTRAP Tuning, Calibrating, and Optimising Guide
• Analyst Software Tutorial
• API Safety Practice Manual

Additional accessories:

• 1 x MonoSpray II assembly (Part No. 1014666, Serial No. 010158072606)
• 4 x brackets (Part No. 016159A)
• 4 x 16mm plastic tubing Y-connectors (Part No. 419-7271)
• 60 x swabs (approx)
• 8 x mixed packets of small O-rings and micro bore tube end connectors
• 5 x Pico Tip Emitters (Stock No. FS150-20-10-D-S)
• 1 x SGE Analytical 500nl syringe
• 1 x Pressure Sensor MPL-503
• 7 x Pico Tips (Nos. 027459, 025388, 025388, 025392 [x4])
• 3 x plastic hose coils for nitrogen
• 1 x 10-litre Nalgene bottle with 3-port top
• 1 x 5-litre Nalgene bottle with SVC pressure valve (Part No. LVA30-03F-C4)

Thermo Vacuum Generators High Vacuum Deposition Sputtering System Lab

This system was removed from a university lab where it was surplus to requirement.

The previous client has stated that it was in full working order when last used, reaching 10<sup style="color: rgb(51, 60, 68); background-color: rgb(255, 255, 255);">-9</sup> mbar vacuum.

It is in good cosmetic condition with all units included in good working order.

The system comprises the following components:

• Thermo Vacuum Generators main reaction chamber

Serial No. CH0412005

• 2 x Softshut gate units Part No. V10EA100

Serial Nos. SS0412002 SS0412003

• Leybold Turbovac Pump Serial No. 30000045767
• Pfeiffer Vacuum compact cold cathode gauge Type IKR261

BOC Edwards EXT75DX turbomolecular high vacuum pump

Serial No. 046074705

• 3 x Luftkuelung pump cooling fans
• 3 x Vulcatherm V1 1000W heaters
• 2 x Elstein FSR 1000W heaters
• RHC Vacuum Generators ZRHC substrate heater controller

Serial No. RC0407002

• Turbotronik NT20 and NT10 analysis chamber and load lock control unit

Serial No. 30000050971

• Thermo Electron AML pressure gauge controller

Serial No. 0006

• Thermo Electron 8558 argon etch gun controller

Serial No. G117

• Hiden Analytical ion gun turbo interface
• Pfeiffer ion gas gun gauge
• Power breaker circuit box
• Leybold vacuum pump Type D16B serial No. 30000044357
• Edwards vacuum pump E2M1 serial No. 046078290
• Leybold vacuum pump type S1.5 serial No. 20900831099

Additional parts:

• 2 x 16 amp cartridge fuses
• 14 x 2 amp cartridge fuses
• 1 x filament for ion gauge DC7033AA
• 2 x air 1/4" tee pieces
• 1 x pfeiffer seal for ion gun BN846241-T
• 4 x resistor filaments
• 1 x Kurt J. Lesker 500g net tin of molecular sieve 1/8" pellets Type 13x

Operating and instruction manuals:

• Thermo EX03 Ion Gun System
• Thermo High Pressure Gas Cell
• Arun Microelectronics Pressure Gauge Controller Interface
• Pfeiffer Vacuum TPG261
• Varian MidiVac Controller 929-x
• Varian Sublimation Controller 929-x
• Leybold Turbovac
• Leybold turbotronik NT20 - NT10
• Eurotherm 2132 and 2166 PID Temperature Controllers

Zeiss Axiovert 200M Confocal Microscope System with LSM510 META & Multi-Laser Setup

This system was removed from a university laboratory where it was surplus to requirements.

The previous owner confirmed it was in good working condition prior to removal, though advised there may be a potential laser-related issue.

The microscope and automated stage have been briefly tested and are functioning as expected, with test slide images successfully captured. Service records show the system was last serviced by Zeiss on 16/04/2014, where the switching mirror was replaced and META calibration completed, and it was reported as fully working at that time.

The system is in good used cosmetic condition with typical signs of general use. Further testing of the confocal and laser system has not been carried out.

The system comprises the following:

• Zeiss Axiovert 200M Confocal Microscope, fitted with:
• Zeiss HBO100 Light Source (447219) with EQB100 PSU
• Zeiss 1095-490 Switching Mirror
• Zeiss 1058-431 Light Channel
• Zeiss 1005-847 Condenser NA 0.55 WD 26mm
• Märzhäuser Scan 120x100 Automated Stage (90-25-414-0000) with inserts
• Zeiss 6 Position Nosepiece
• Zeiss 1005-827 Binocular Tube
• 2 x Zeiss 1016-758 W-PI 10x/23 Eyepieces

Objectives (Zeiss):

• Plan-NEOFLUAR 10x/0.30 ∞/0.17
• Plan-NEOFLUAR 20x/0.50 ∞/0.17
• EC Plan-NEOFLUAR 40x/1.3 Oil Ph3 ∞/0.17
• Plan-APOCHROMAT 63x/1.4 Oil DIC ∞/0.17
• A-Plan 10x/0.25 Ph1 ∞/-
• Plan-NEOFLUAR 40x/1.3 Oil DIC ∞/0.17

Laser Scanning & Illumination Components:

• Zeiss LSM510 META Scan Head
• Zeiss LSM 510 Laser Module including:
• Lasos LGK 7812 ML4 (450–530nm, May 2011)
• Lasos LGK 7628-1 (633nm, June 2012)
• Lasos LGK 7786 P (543nm, August 2009)
• Lasos LGN3000 Laser Power Supply
• Zeiss ECU
• Zeiss MCU 28 Stage Controller
• Zeiss Bedienpult/WIS XY Joystick Controller
• Zeiss Remote Control

Optics & Filter System:

• Zeiss 5 Position Motorised Reflector Turret (1064-365)
• Filter Set 10 BP450-490 FT510 BP515-565
• Filter Set 15 BP546/12 FT580 LP590
• Filter Set 49 G365 FT395 BP445/50
• Zeiss DIC/Senarmont (1005-863)
• 2 x Zeiss Iris Stop Sliders (one not functioning correctly)

Environmental Control:

• PeCon Inkubator XL-3 Enclosure (one thumb screw missing)
• Heating Unit with hose
• Tempcontrol 37-2 Digital
• CO₂ Controller

Computing & Software:

• Fujitsu Siemens Celsius PC (Windows 2000)
• Keyboard, monitor & mouse
• Carl Zeiss software installed with USB license dongle
• (Note: DVD/CD drive belts require replacement)

Additional:

• Various connection cables
• Manuals and software discs

Please note: The main table shown in images is not included, though a suitable alternative may be available separately.

SPT Labtech Dragonfly® Discovery 3-Head Liquid Handling System with Laptop & Accessories

This  system is being sold on behalf of a client where it is surplus to requirements.

The system was purchased in late 2023 and installed on 26/09/2024. It was purchased alongside an SPT Labtech Mosquito® LV Genomics system to deliver the Olink Explore 3k workflow on site. Shortly before the planned training date, Olink removed this product from the market, meaning the client no longer has a workflow requirement for the liquid handling equipment.

Other than installation and set-up, the system has not been used. It was recently serviced on 16/03/2026, and supporting service/installation documentation is available.

SPT Labtech have advised that a new user would be able to purchase a service and training package directly from SPT if required.

The sale includes the instrument laptop with SPT software. Any remaining consumables from the original installation and recent preventative maintenance visit will also be included.

Please note that the original crate/packaging is not available, so specialist packaging and collection will need to be arranged by the purchaser.

System Includes:

SPT Labtech Dragonfly® Discovery Instrument – 3 Head

Dragonfly® Discovery Instrument Laptop

Dragonfly® Discovery 384-Well PCR Booster Plate

Remaining consumables from installation/PM, where available

Service / Installation History:

Purchased: Late 2023

Installed: 26/09/2024

Recently serviced: 16/03/2026

Installation reports available

PM reports available / to be supplied

Sirah Cobra Stretch Dye Laser CSTR-LG-24 Lab

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

According to the previous owner, it was fully operational as of 2022 (when the previous occupier retired).

Please note; The lid struts are broken so the lid does not stay open on its own. There is also a cover/panel that has come loose from either inside or outside of the machine, however it is not clear where this has come from.

The previous owner had attached a paper sign to the laser stating: “DO NOT UPGRADE WINDOWS! This will cause the grating arm to fail and the monochromator will require repair and calibration.”

Lloyd LR100k Materials Testing Machine with 100kN Load Cell & Safety Screen

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Please note: This system is currently dismantled and the buyer will be responsible for reassembly.

Dimensions:

• External length (cm) 151
• External width (cm) 73
• External height (cm) 247

Hamilton Microlab STARlet Liquid Handling Workstation CO- RE 96 & Software

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. We were unable to test it further at our facility.

Please note: There is no PC included.

Includes:

• CO-RE Tips:
• 10x 1920 Tips Clear Stacked (50 µL) Without Filters
• 9x 1920 Standard Volume Tips Clear Stacked (300 µL) Without Filters
• 21x 480 High Volume Tips (1000 µL) Without Filters
• 10x 480 Standard Volume Tips (300 µL) Without Filters
• 1x 1000 µL Rack of Tips left in the machine
• Manuals:
• 1x Programmers’ Manual
• 1x Service Records / Declaration of Conformity / Maintenance Records
• Software:
• Hamilton Robotics Microlab STAR – Venus One – Base Package 4.2
• Hamilton Robotics Microlab STAR – Venus One – Service Pack 2
• Windows Vista Home Premium 64BIT SP1 DVD
• DELL Cyberlink PowerDVD DX 8.2 Software DVD
• DELL Inspiron and Dell Studio Laptop Computer Software DVD
• McAfee Security Centre Installation CD
• DELL Microsoft Works 9.0 and Microsoft Home & Student 2007 Trial
• Other:
• 13x Unbranded Microplate Reservoir
• Stainless Steel Tip Waste / Eject Chute Bracket (mounting plate)
• Smoked Plexiglass / Acrylic Waste Chute Cover / Slide
• Circular Deck Mounting / Alignment Ring (with brass inserts)

Illumina NextSeq 550 DNA Sequencer

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Taylor-Wharton LABS-40K Liquid Nitrogen Cryogenic Storage Tank

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition, and remains untested.

The previous owner stated it is in working order.

Dimensions;

• External length (cm) 125
• External width (cm)117
• External height (cm) 144

• 417 kg

Iveco Eurocargo 75-160 7.5T Box Van with Cantilever Tail Lift – Euro 6 – 186,290 Miles

This vehicle is offered in good used condition, both internally and externally, having been maintained and regularly inspected.

Vehicle Overview

• Make/Model: Iveco Eurocargo 75-160
• Gross Weight: 7.5 Ton
• Emissions: Euro 6
• Mileage: 186,290 miles

Condition

The vehicle presents well for its age and mileage, with a clean cab and body. It has been in active service and shows typical signs of use, but nothing outside of normal wear expected for a commercial vehicle of this type.

Maintenance & Inspection History

• Last serviced: 29/01/2026
• Tail lift inspection: 11/02/2026
• Tachograph calibration: 13/02/2026
• Brake test: 04/03/2026
• MoT: 11/03/2027

Tyre Condition

• Front tyres: approx. 13mm tread
• Rear tyres: approx. 11mm tread

Tail Lift Specification

• Type: Cantilever tail lift
• Platform size: 170cm (L) x 240cm (W)
• Load capacity: 1000kg

Body Dimensions

• Internal length: 6 metres
• Internal width: 241cm
• Internal height: 242cm
• Rear door opening: 223cm (W) x 224cm (H)

Additional Information

• Supplied with 1 ignition key and 2 fuel keys

Hamilton Microlab Star M Liquid Handler System Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

It is fitted with a SPAN-8 and CORE-96 Head

Accessories included (Deck Components):

• 2x Transport Locks (in place)
• 2x Hamilton Microlab 182070 96-Well PCR Plate Carrier, 5 Plate, 6 Track PLT_CAR_L5PCR_A01
• 2x Hamilton Microlab 182085 Framed Tip Rack (FTR) Landscape Carrier TIP_CAR_480_A00
• 2x Hamilton Microlab 182090 Deepwell Plate Carrier PLT-CAR-L5AC
• Hamilton Microlab 184089 Coregrip 1000 µL Waste Block
• 2x Fuses labelled 363013
• 7x Screws for Back Support and Perspex Cover
• 2x Screws for LHS Covers

Leica DMi8 Inverted Microscope System

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in very good used cosmetic condition, with various marks and signs of general use. All functions operate as they should. The camera has not been tested as no cables or software are available.

The system comprises the following:

• Leica DMi8 Inverted Microscope with tiltable transmitted light arm
• Marzhauser 31-12-0000 stage
• Leica S40/0.40 with manually movable condenser head 11525374
• Leica 0.55 S 28 condenser head lens 505234
• Leica TL LED lamp 11525101
• Leica C-Mount 0.70x
• Leica DFC3000 G camera 11547005
• Leica manual external fluorescence axis 11889051
• Leica fluorescence protection shield 11525114
• Leica EL6000 external light source for fluorescence excitation with liquid light guide
• 2 x Leica HC Plan 10x/22 eyepieces 507820

Fitted objectives:

• Leica ∞/-/OFN25 HI PLAN 4x/0.10 PH0
• Leica ∞/-/OFN25/B N PLAN 10x/0.25 PH1
• Leica ∞/1.0/OFN25/C N PLAN L 20x/0.35 PH1
• Leica ∞/0-2/OFN25/C N PLAN L 40x/0.55 CORR PH2
• Leica ∞/-/OFN22/D N PLAN 100x/1.25 OIL PH3

The lab confirmed it was in good working order prior to removal.

TECAN Customised Freedom EVO-2 HSM2 Liquid Handling Robot

This system was removed from a facility where it was surplus to requirement.

The Freedom EVO-2 and HSM2.0 module have both been powered on; however further functional testing was not possible as no PC was available to connect and control the system.

Includes:

• Customised Tecan Freedom EVO-2
• HSM2.0 Module and Power Supply (+ cable)
• Weighted stand for HSM2.0 module
• 4 x waste/liquid containers
• Bracket for holding containers (left side)
• Ergotron keyboard and monitor stand (right side)
• 1 x well plate stand
• Disposing system
• Barcode scanner (inside, back left)
• Various tubing throughout
• Box of spares
• Instrument Software Version 7.2
• Operating manual

Dimensions;

• External length (cm) 78
• External width (cm) 107
• External height (cm) 166

Thermo TSQ Quantum Access Max Mass Spectrometer Lab

This system was removed from a university where it was surplus to requirement.

It powers on and is in good cosmetic condition.

The previous owner stated it was in working order when last used, however, it has been in storage for several years.

S plus B Custom Chemical Delivery Gantry System Petrochemical Gasses

This system is being sold on behalf of a client where it is surplus to requirement.

The custom-built S plus B gantry was originally designed for the delivery of petrochemical gases from a wall-mounted cylinder rack to a series of modular desks. The system features a precision-engineered overhead gantry with multiple stainless steel lines and a collection of high-quality, unused valves and fittings.

It was installed but never used, remaining in pristine condition.

Includes:

• Overhead gantry system
• Stainless steel piping and valve assembly

Please note, the normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Roche cobas e 411 Automated Analyser (Disk System) with Stand

This item was removed from a facility where it was surplus to requirements.

It is in very good cosmetic condition, with only a few scuffs to the corners of the main unit and on the top of the shelving unit underneath.

All parts of the system power on.

A video of the system in operation are available on request.

The previous owner stated it was in working order prior to removal.

Included Components:

Roche cobas e 411 Automated Analyser (Disk System)

Cabinet / stand

OKI B412 printer

Includes 2x installation disks

P/N: N22500B 02

S/N: BW22025014

Powervar Uninterruptable Power Supply ABCE1442-22

P/N: 51144-03R

S/N: 5114403R-2340047

Open bag of 250 Roche cobas sample cups

Beckman Coulter SCIEX PA800 PLUS Biologics Analysis System

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in good cosmetic condition.

The previous owner has stated that the unit has had little use. Please note that the PC is not included.

A video of the unit operating is available on request.

Includes:

• 10 x Pre-Assembled Capillary Cartridges (used)
• 1 x Pre-Assembled Capillary Cartridge (new)
• User manual,

Model: SCIEX PA800 PLUS

Beckman Coulter SCIEX PA800 PLUS Biologics Analysis System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Shimadzu HPLC System with SIL-20A, LC-20AD, DGU-20A5, CTO-20A, SPD-20AV & Sedex 90 ELSD

This item was removed from a facility where it was surplus to requirement.

The Shimadzu HPLC system is designed for high-performance liquid chromatography applications, commonly used for chemical analysis and separation in laboratory environments.

The system powers on. However, no further functional testing has been carried out.

Please note; the SPD-20AV detector displays a red light with the message “254nm -0.00 AU Check no good.”

The included Sedere Sedex 90 ELSD detector powers on, but the internal glassware on the outlet pipe is broken.

Included:

• Shimadzu SIL-20A Autosampler (S/N: L20164200138 SA)
• Shimadzu LC-20AD Pump (S/N: L20104370018 US)
• Shimadzu Reservoir Tray (S/N: L20304200178 SL)
• Shimadzu DGU-20A5 Degasser (S/N: L20244200349 CR)
• Shimadzu CTO-20A Column Oven (S/N: L20204200140 NJ)
• Shimadzu CMB-20A Controller (S/N: 228-45012-38)
• Shimadzu SPD-20AV Detector (S/N: L20134200736)
• Shimadzu FRC-10A Fraction Collector (S/N: C20374204090 SA)
• Sedere Sedex 90 LT-ELSD Detector (S/N: 151090136A)

Beckman Coulter Avanti JXN-26 Centrifuge w/ JCF-Z Rotor 20000rpm Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Zeiss PALM MicroBeam System with Observer Z1, Cameras, PC & Software

This system was removed from a facility where it was surplus to requirement.

The Zeiss PALM MicroBeam system is a laser microdissection platform built around the Observer Z1 microscope, designed for precise sample isolation and imaging in advanced research applications.

The PC (Windows 7) is installed with AxioVision 4.8.3.0 and PALMRobo 4.6 Pro software. Both cameras were able to capture images, and the system responds to the joystick, touchscreen, and software controls. PALMRobo software initialises correctly and live slide images were visible.

Included:

Microscope & Core System:

• Zeiss Observer Z1 Microscope
• PALM MicroBeam System with RoboMover & Motorised Stage
• Motorised Condenser (NA 0.55 WD 26mm)
• Motorised 6 Position Filter Turret

Illumination:

• HAL100 Halogen Lamp
• HBO100 Mercury Lamp with ebq100 Power Supply

Cameras & Optics:

• Zeiss AxioCam MRm Camera
• Zeiss AxioCam Cc1 Camera
• Zeiss Binocular Tube
• 2 x Zeiss W-PI 10x/23 Eyepieces

Objectives:

• Zeiss FLUAR 5x/0.25
• Zeiss FLUAR 10x/0.50
• Zeiss LD Plan-NEOFLUAR 20x/0.4
• Zeiss LD Plan-NEOFLUAR 40x/0.6
• Zeiss LD Plan-NEOFLUAR 63x/0.75
• Zeiss EC Plan-NEOFLUAR 100x/1.3 Oil

Filters & Accessories:

• Multiple filter sets installed
• Analyzer slider with fitted filter

Control & Computing:

• Fujitsu PC (Windows 7) with AxioVision 4.8.3.0
• PALMRobo 4.6 Pro Software
• Zeiss ZEN 4.8.3 Software (boxed with dongle)
• Zeiss Controller
• Zeiss Touchscreen Control Pad
• Megatron Joystick
• Marquardt Footswitch

Additional Equipment:

• Interpower Power Strip with cables
• PALM DishHolders (35cc & 50cc)
• PALM Collector Sets (SingleTube II 200 & 500)
• PALM LiveCell Collector
• PALM Membrane Slides
• Stage insert slide holders
• User manuals
• All required cables

Typhoon 9400 Variable Mode Imager with Blue Laser Module Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility due to limitations with testing Class III+ Lasers.

Thermo Scientific Invitrogen CellInsight CX7 HCS High Content Analysis System

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: There is no PC or Software included.

Includes various user manuals.

Miltenyi Biotec CliniMACS Plus Cell Separation System Lab

This system was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

TTP LabTech Mosquito LCP Automated Liquid Handling

This item was removed from a university lab where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was working order prior to removal.

Specifications:

• Model: Mosquito LCP
• Serial No.: LCP-601

Leica DMI6000CS Microscope System

This item was removed from a university laboratory where it was surplus to requirements.

It is in good used cosmetic condition with signs of general use.

The microscope was tested using a borrowed CTR6000 and was found to be functioning as expected. It will require a CTR6000 and additional components to become a fully operational system.

Includes:

• Leica DMI6000CS Microscope, fitted with:
• 2 x Leica 507808 HC PLAN S 10X/25 M eyepieces
• 1 x Leica 156504141 motorised stage
• 1 x adjustable slide holder
• 1 x microplate holder
• 1 x XY cable for connection to the CTR6000
• 1 x Leica 11504103 12V 100W halogen lamp
• 1 x Leica 11505180 XY & Z Controller

This Perkin Elmer Envision 2103 Plate Reader Multilabel Plate Reader is being sold on behalf of a client. It is surplus to requirements.

The Perkin Elmer 2103 Plate Reader Multilabel Plate Reader is a fast, sensitive, and versatile benchtop reader that delivers optimized performance. It's a dynamic filter-based reader for Multi-label reads.

Included with it are;

Read technologies.           Time-Resolved Fluorescence

                                               Fluorimeter Top and Bottom

                                               Luminescence

                                               US Luminescence

                                               Fluorescence Polarisation

                                               Absorbance

                                               Alpha Screen

Stacker

Barcode readers

Windows 10 PC

3 months UK warranty

It is fully refurbished and calibrated to factory specifications.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.



Bruker Skyscan 1178 In Vivo Micro CT Fast X-RAY Microtomograph

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further due to limitations at our facility.

According to information provided by the previous owner, the unit was last used approximately eight or more years ago. There were no known faults at the time of last use, however it is likely due to the extended period of inactivity, the x-ray tube may no longer be functional and may require replacement. We are unable to confirm this.

Disclaimer; Users should seek technical expertise before attempting to power on, as inactive tubes may present a risk of cracking due to uneven heating.

Includes:

• Manual

Max Sample Dimensions;

• 80mm diameter x 200mm height.

Lonza 4D-Nucleofactor Electroporation System Core & X Units Lab

This system was removed from a facility where it was surplus to requirement.

Both units are in very good cosmetic condition and power on. The previous owner stated it was in good working order prior to removal.

The system includes;

• Lonza 4D-Nucleofactor Core Unit
• Lonza 4D-Nucleofactor X Unit

Olympus IX81 with Olympus MT20 Cell IR System

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in complete working order.

The system consists of:

• 1 x Olympus IX81F Microscope fitted with:
• 1 x Olympus 12V100WHAL-L Halogen Lamp.
• 1 x Olympus IX-ILL100LH
• 1 x Olympus IX-LWUCD NA 0.55 Condenser
• 1 x Prior H107PIX2 Inverted Scanning Stage (With various inserts).
• 1 x Olympus U-BI90CT Binocular Head.
• 1 x Olympus WH10X/22 Eyepiece.
• 1 x Olympus WH10X-H/22 Eyepiece.
• 1 x Olympus IX2-RFACA Motorised 6 Position Florescence Cube Turret:

5 x Cubes fitted:

• U-MNIBA3
• TRITC
• U-MF2
• U-M61002 D/F/R 703
• U-M61009 CFP/YFP/CY5

1x Olympus Motorised 6 Position nosepiece:

6 x Objectives Fitted:

• 1 x Olympus Plan N

2x/0.06

∞/-/FN22

• 1 x Olympus CPlanFl

10x/0.30 PhC

∞/1

• 1 x Olympus LCPlanFl

20x/0.40 Ph1

∞/

• 1 x Olympus LCPlanFl

40x/0.60 Ph2

∞/

• 1 x Olympus UPlanFl

40x/0.75

∞/0.17

• 1 x Olympus PlanApo

60x/1,40 Oil

∞/0,17

• 1 x Olympus U-DPCAD Dual Port C Mount Adapter.
• 1 x Olympus DP71 Camera.
• 1 x Olympus F-View II Camera.
• 1 x Olympus IX2-UCB Controller.
• With Olympus U-HSTR2 Remote.
• 1 x Fujitsu Siemens PC running:
• Windows XP
• Cell A (Has been installed in German)
• Will require re-installing and setting up for English language.
• Cell R (English)
• 1 x Prior ProScan Controller
• With Prior CS152V2 Joystick.
• 1 x Cell IR MT20 Unit.
• With 2 x Fibres - One looks possibly damaged.

Also includes:

• Various manuals.
• Cell IR Software Discs
• Soft Imaging System Software Discs.
• 1 x Olympus UPlanSApo
• 60x/1.35 Oil
• ∞/0.17/FN26.5
• 1 x Olympus UPlanApo
• 100x/1.35 Oil Iris
• ∞/0,17
• 1 x Olympus U-MF2 Filter Cube(Appears to be brand new in box)
• 9 x Boxes of Olympus Immersion Oil(Brand new in boxes)
• 2 x Spare Arc Lamps(Unknown)
• 2 x Leica 541006 C-Mount.

IP5X / IP6X Dust Test Chamber, 1000L

This system is being offered for sale on behalf of a client due to being surplus to ongoing requirements at The National Robotarium, Edinburgh.

The unit is an IP5X / IP6X dust chamber with a 1000L test volume, intended for dust ingress testing of products and assemblies under controlled conditions. Equipment of this type is commonly used for environmental simulation and ingress protection testing where repeatable exposure to circulating dust is required for product development, qualification and compliance work.

According to the client, the chamber is in very good used condition and close to new in appearance and working order. It was rarely used between 2022 and 2026, with fewer than 20 recorded uses, and no issues or faults logged. The client has advised that the chamber has not been recalibrated since original purchase, however no loss of calibration has been identified. Routine internal maintenance and periodic quick runs every two weeks were reportedly carried out in accordance with the user manual. No external maintenance record is available.

No further testing has been carried out by us.

Native onboard software supplied with the chamber is included. Videos of the system in operation are available on request.

Included in sale:

• IP5X / IP6X dust test chamber, 1000L
• Brush
• Talcum powder
• Additional talcum powder
• Stainless steel shovel
• Stainless steel sieve
• IP rated plug
• Stainless steel grill to hold device under test (1 pc)
• Native onboard supplier software
• User manuals

Please note, any additional accessories, services or documentation not specifically listed above are not included.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Olympus IX-70 // Fluoview FV-500 Confocal Microscope System

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on, and the basic microscope functions have been tested successfully. All optical and mechanical components appear to operate as expected, with the system in good overall cosmetic condition, showing signs of general use. Full FV500 operation will require a compatible PC running the appropriate control software.

The system consists of:

Olympus IX-70 Inverted Microscope fitted with:

• Olympus IX-ILL 100 LH Transmitted Illumination Column
• Olympus IX-LWPO Polarizer
• Olympus IX-LWUCD Phase/DIC Condenser
• Olympus IX-SFR Mechanical Stage
• Olympus 6 Position Nosepiece
• Olympus FV5-DICT DIC Slider
• Olympus IX-AN Analyzer
• Olympus IX-RFAC Cube Turret fitted with 3 filter cubes:
• Olympus U-MNIBA2
• Olympus U-MWG2
• U-N41024 CY5 LP
• Olympus U-BI90 Binocular Tube 90
• Olympus WH10X-H/22 Eyepiece (appears to be missing outer ring)
• Olympus WH10X/22 Eyepiece
• Olympus Liquid Light Guide with LG-PS2 and FV5-TD
• Olympus U-ULS100HG Mercury/Fluorescence Lamp with U-RFL-T Power Supply
• Olympus FV5-74-2 Fluoview FV500 Controller (working condition unknown)
• Olympus FV5-ZM Scanning Head

Included Objectives:

• Olympus UPlanApo 10x/0.40 ∞/0.17
• Olympus UPlanApo 20x/0.70 ∞/0.17
• Olympus UPlanApo 40x/0.90 WLSM ∞/0.17
• Olympus UPlanApo 60x/1.40 Oil ∞/0.17
• Olympus UPlanApo 100x/1.35 Oil Iris ∞/0.17

Bonad Dust-Proof Test Chamber BND-IP56X-1000L Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

PerkinElmer EnVision 2104 Multilabel Reader (Model No. 2104-0020)

This system was removed from a laboratory where it was surplus to requirements.

Due to limitations with testing Class 3+ lasers at our facility, we were unable to carry out full functionality testing on the EnVision instrument and therefore it has not been powered on or tested by us.

However, the supplied PC system is  fully operational and has been verified to connect to the EnVision 2104, with screenshots provided showing the software running.

It is in good cosmetic condition.

Important: This unit currently has shipping bolts fitted to protect the instrument during transport. These must be removed prior to use. (Replacement bolts have been fitted using best available equivalents, as the original supplied bolts were not available.)

Please also note: The supplied RS232 comms cable must be connected to the PCI card RS232 socket, not the built-in Dell RS232 port.

Included:

• PerkinElmer EnVision 2104 Multilabel Reader (Model No. 2104-0020)
• PC System (operational and verified to connect to the EnVision 2104)
• 2 x Boxes of EnVision Optical Modules and Filters (boxes largely empty; contents unknown—filters may already be fitted to the instrument and only the -boxes remain)
• 1 x Briefcase of Luminescence Apertures
• 1 x Briefcase of Filter and Mirror Modules
• Multilabel Test Plate 2009-0020 (Exp. Date: 08/2011)

Optical Modules / Filters Included (as labelled):

FITC Label 2100-8010

• 2100-4030 (403) / 2100-5020 (102) / 2100-5120 (206)

FITC FP Label 2100-8020

• 2100-4090 (431) / 2100-5040 (104) / 2100-5140 (208) / 2100-5150 (209)

LANCE 320 Label 2100-8160

• 2100-4170 (412) / 2100-5060 (111)

Optical Modules and Filters for AlphaScreen Option

• (2102-8340)

BODIPY TMR Label 2100-8190

• 2100-4120 (405) / 2100-5050 (105) / 2100-5530 (229)

Manuals Included:

• EnVision Reference Manual
• EnVision Instrument Manual
• A Practical Guide to Working with AlphaScreen
• User’s Guide WorkOut 2.5