Items 1281 to 1300 of 2900

Image of item

£ 60.00 (ex. VAT) 1 in stock

Heraeus 3325 Rotor for Sorvall Biofuge Pico Centrifuge 13000rpm

ITEM-12613

This unit was removed from a spares/repairs centrifuge that had a power fault.


We have not tested the rotor so the rotor must be safety inspected prior to use.

Image of item

£ 320.62 (ex. VAT) 1 in stock

Heraeus 7591 Swing Bucket Rotor Centrifuge Lab

ITEM-11711

This rotor set was removed from a university store during a clearout.


We have not tested the rotor.

Image of item

£ 472.50 (ex. VAT) 1 in stock

Heraeus Biofuge Primo Benchtop Lab Centrifuge 13,000 rpm, 24 Eppendorf Tubes

ITEM-12121

This unit was removed from a lab as surplus to requirements.


It appears to be in full working order, and reached 13,000 rpm.


Image of item

£ 303.75 (ex. VAT) 1 in stock

Heraeus D-63450 Hanau Laboratory Warming Oven 70C Lab

ITEM-10082

This unit was removed from a lab as surplus to requirements.


We have tested it and it reaches 70C in testing.

Image of item

£ 303.75 (ex. VAT) 1 in stock

Heraeus Function Line Labofuge 400 Centrifuge with Rotor

ITEM-12090

This unit was removed from a lab during a clearout.

We have tested the unit up to 3500 RPM and it appears to be in good working order.

This centrifuge comes with:

  • Rotor Heraeus instruments 5000 min-1 #8179
  • Buckets Heraeus #8172 max loading 275g

Image of item

£ 112.50 (ex. VAT) 1 in stock

Heraeus Function Line T0 Lab Oven Spares / Repairs

ITEM-12565

This unit was removed from a lab during a clearout.


Unit doesn't seem to heat up. When set to 37.5C it seemed to sit at 11.5C (room temp).


Unit sold as spares / repairs.


Image of item

£ 338.44 (ex. VAT) 1 in stock

Heraeus Instruments B6120 Laboratory Incubator Lab Equipment

ITEM-12446

Max temp setting is 37°C.

This incubator reached max temp but when testing with an external digital thermometer it showed as 35°C.


Therefore this would be suitable for those looking to hold temps no higher than 35°C.


The timer worked as expected.

Image of item

£ 187.50 (ex. VAT) 1 in stock

Heraeus Instruments Heracell 150 CO2 Incubators Lab - Spares / Repairs

ITEM-12664

This unit was removed from a lab as part of a replacement / upgrade programme.


The incubator powers on and heats and holds temp at 40C. We have not tested the CO2 function.


The door hinges are not quite square and so the door becomes loose when moved - the door seal is slightly broken, and so the door doesn't shut tightly.


The inside is heavily rusted / oxidised as shown in photo.


Unit probably works fine - but needs a refurbishment so is sold as spares / repairs.

Image of item

£ 371.25 (ex. VAT) 1 in stock

Heraeus Kendro Products HeraCell CO2 Incubator Lab

ITEM-10507

This unit was removed from a lab during a clearout as surplus to requirements. The lab said this was a working unit when last used.


The heating appears to work well but we have not tested the CO2 functions at our site.

Image of item

£ 202.50 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Centrifuge Lab Equipment

ITEM-10519

This unit was removed from a lab as surplus to requirements.


We have tested the unit and it appears to run properly, but there is a missing a bracket for the lid strut, and also a seal needs replacing, so unit needs a little refurbishment prior to use.

Image of item

£ 135.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400R Benchtop Centrifuge Spares Repairs

ITEM-08826

This unit was removed from a lab during a clearout.


Unfortunately on testing the unit we get Error E-15. This apparently relates to the below:


"Open temp. sensor

check sensor, control circuits

replace sensor or main board"


We have not been able to open the unit to assess if there is a rotor.


Unit is sold as spares / repairs only.


Image of item

£ 900.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0 Benchtop Centrifuge + Rotor Lab 6000rpm

ITEM-13428

This unit was removed from a university lab as surplus to requirements.


We have powered the unit on and tested it to 6000 rpm where it appears to run smoothly.


There is a rotor included but it does not have any buckets.


Image of item

£ 121.50 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0 Mid Benchtop Centrifuge Spares Repair

ITEM-10128

This unit was removed from a university store room during a clear out.


It powers on but stops / starts intermittently.

Image of item

£ 101.25 (ex. VAT) 1 in stock

Heraeus Primo Benchtop Lab Centrifuge - Spares Repairs

ITEM-12120

This centrifuge was removed from a lab during a clearout.


The units lid does not open, and so the unit is sold as spares / repairs.

Image of item

£ 303.75 (ex. VAT) 1 in stock

Heraeus Primo Benchtop Lab Centrifuge + Rotor Working but Noisy

ITEM-09572

This unit was removed from a lab as surplus to requirements.


We tested the unit and it runs up to 13,000 but is quite noisy, so probably requires a little servicing.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Heraeus Sepatech Biofuge 15 Benchtop Centrifuge 10,000rpm Lab

ITEM-07328

Heraeus Sepatech Biofuge 15 Centrifuge.


Tested up to 10,000 rpm.

Image of item

£ 142.50 (ex. VAT) 1 in stock

Heraeus Sepatech Biofuge Benchtop Centrifuge + Rotor

ITEM-08857

This unit was removed from a lab as surplus to requirements.


We have powered it on and it spins up to 13,000 rpm.

Image of item

£ 320.62 (ex. VAT) 1 in stock

Heraeus Sepatech Megafuge Centrifuge Rotor 6000 rpm BS4402/A Cat 3360 Lab

ITEM-10127

This pair of rotors were removed from a lab during a clearout.


One rotor looks to be in good condition - whereas the other has some damage making it only suitable for spares (e.g. spare buckets etc).


Both rotors are untested and would need to be safety tested prior to use.

Image of item

£ 303.75 (ex. VAT) 1 in stock

Heraeus Thermo Scientific Function Line Labofuge 400 Lab Centrifuge + Rotor

ITEM-08929

This unit was removed from a lab during a clearout.


We have tested the unit and it appears to be in good working order.

Image of item

£ 303.75 (ex. VAT) 1 in stock

Hermle Z 400 K Refrigerated Bench Top Centrifuge With Rotor

ITEM-08028

This unit came from a laboratory during a clearout as surplus to requirements.


We tested it and it ran smoothly to 3,500 rpm, and refrigeration seems to work properly as well. However, we have not tested it any further than this.


The unit comes with a rotor, but no buckets.

Items 1281 to 1300 of 2900