All Products

Metrohm 901 Titrando, 800 Dosino, and 803 TI Stand with Accessories

This system was removed from a university where it was surplus to requirements.

The system powers on and is in good working order. The 901 Titrando, 800 Dosino, and 803 TI Stand were tested with an in-house PC w/ software, and all components appeared to function as expected, including pH measurement, dosing, and stirring.

The PC used for testing is not included in the system.

The required software can be downloaded for free from the Metrohm website, but it will require a purchased licence after 30 days of use.

Included:

• Metrohm 901 Titrando
• Metrohm 800 Dosino
• Metrohm 803 TI Stand
• Control cable for PC interface

Specifications:

Model: 901 Titrando

Accessories: 800 Dosino and 803 TI Stand

Everything is in good cosmetic condition with some light signs of use.

BioTek 50 TS Microplate Washer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes;

3 x Waste/Solution Bottles

The previous owner stated it was in working order prior to removal.

Zeiss LSM 710 ECU Box With 3 x Lasers (Red, Green & Blue) Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and was removed from a Zeiss LS 710 System.

All three lasers are supplied complete with fibres; however, each unit will require fibre re-alignment.

The lasers are operational, though they are currently out of alignment.

The unit is fitted with 3 x lasers:

• 1 x Red
• 1 x Green
• 1 x Blue

Also included:

• 1 x LASOS PSU with remote.
• 1 x ECU remote.
• 3 x Power strips.
• Various cables.

Perkin Elmer Janus JANUS Expanded Platform 8Tip & Gripper AJL8G01 Lab

This system was removed from a university laboratory where it was surplus to requirements.

It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below:

The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. However, tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place.

There is no Software included with this system.

Specifications:

• Workstation Part No.: AJL8G01
• Workstation Serial No.: DG11073293
• Manufacture Date: November 2007
• Last Service: 01-12-2022

Accessories:

• Box of Plate Holders.
• Various Cables.
• 2 x Waste Bottles.
• Waste Bin

The system is in reasonable used cosmetic condition, with two hinges needing replacement.

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

MTI Corporation MSK-111A Semi-Automatic Stacking Machine Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Features;

• Control Unit
• Stacking Unit
• Foot Pedal

Instron Wilson Tukon 2100 Hardness Testing Microscope

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Covaris M220 Focused Ultrasonicator

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good working order. The laptop has Sonolab 7.2 software installed.

It is in good cosmetic condition with very minor marks.

Sedgwick 3-Head Tennoner

This item was removed from a facility where it was surplus to requirements.

It powers on, and all mechanical movements operate smoothly with no visible signs of corrosion. Full functional testing could not be carried out at our facility.

The machine was last serviced in 2023.

Model: 3-Head Tennoner

Beckman Coulter P/ACE MDQ Capillary Electrophoresis System

This system was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, the previous owner stated it was in working order prior to decommissioning.

Includes:

• National Instruments GPIB-USB-HS (Model: GPIB-USB-HS, Serial No.: 152DFC7)
• PC running Windows XP Professional Version 2002 Service Pack 3 with the following software:
• Xcalibur 2.0.7 SP1 (Aug 12 2008)
• Mos_ProtCluster
• 32 Karat Software Version 8.0 Build 825

Model: P/ACE MDQ Capillary Electrophoresis System

Serial No.: 3061077

Buehler MetaServ 2000 – 200mm – Dual Disc – Adjustable Speed

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Applied Biosystems 3130 Genetic Analyzer with Software

This system was removed from a university laboratory where it was surplus to requirements. It powers on, but no further testing has been conducted.

The previous user indicated the system requires significant maintenance, particularly with the analyte column, which needs regular flushing or refreshing to prevent polymer crystallisation.

Cosmetically, the unit is in good condition; however, it does not come with the original power cable. A NEMA 30A plug and a 32A 240V blue plug are required, but not included.

Included Software:

• AB DNA Sequencing Analysis Software v 5.2
• 3130 Genetic Analyzer Data Collection Software v3.0
• GeneMapper ID Software v3.2
• SeqScape Software Version 2.5

Included Accessories:

• 2 x 3100-Avant Capillary Array (36 cm)
• 1 x 3130 & 3100-Avant Capillary Array (50 cm)
• 1 x 3130 & 3100-Avant Capillary Array (36 cm)

Specifications:

• Model: 3130
• Serial No.: 17308-039

Thermo Scientific 7405 CryoPlus 3 Storage System 340L

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 03/04/2025

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

PE Applied Biosystems Tropix TR717 Microplate Luminometer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Centurion Scientific PRO-RESEARCH.K244RFS Refrigerated Floor Standing Centrifuge

This system is being offered on behalf of a client, where it is now surplus to requirements.

The Centurion Scientific PRO-RESEARCH.K244RFS is a high-capacity refrigerated laboratory centrifuge suitable for research, pharmaceutical, biotechnology and clinical laboratory applications.

The system is in working order.

The centrifuge is fitted with a 4-place swing-out rotor complete with four stainless steel buckets, making it suitable for processing larger sample volumes. The unit also features an integrated colour touchscreen controller and refrigerated cabinet for temperature-controlled centrifugation.

Cosmetically, the system presents well with only light signs of previous laboratory use consistent with its age.

The client has advised they cannot provide service history for this item.

The client has not confirmed whether they are able to package the system for transport. Buyers should make their own arrangements for suitable lifting equipment, palletisation, crating and transportation.

Includes;

1 x Centurion Scientific Refrigerated Floor Standing Centrifuge

1 x 4-place swing-out rotor

4 x Stainless steel buckets

Standing centrifuge logbook

Power lead

Specifications;

Manufacturer: Centurion Scientific

Model: PRO-RESEARCH.K244RFS

Type: Refrigerated Floor Standing Centrifuge

Integrated colour touchscreen controller

Swing-out rotor configuration

4-position rotor

Approximate Year of Purchase: 2019

GE AKTA Purifier 100 FPLC System - P-900, UPC-900,Box-900, M-925, PV-908,INV-907

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and in good working order.

Please note: It is missing tubing and the CU950 interface module for PC connectivity.

Included components:

GE AKTA P-900 Pump

• Model: P-900
• Serial No.: 1358382
• Code No.: 18110856

GE AKTA UPC-900 Detector

• Model: UPC-900
• Serial No.: 1359309
• Code No.: 18112895

GE AKTA Box-900

• Model: Box-900
• Serial No.: N/A

GE AKTA M-925 Mixer

• Model: M-925
• Serial No.: N/A

GE AKTA PV-908 Valve

• Model: INV-908
• Serial No.: 1352513

GE AKTA INV-907 Valve

• Model: INV-907
• Serial No.: 1355914

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories

This was removed from a university lab where it was surplus to requirements.

The system powers up and the microscope is in good working order.

With the Palm RoboSoftware V4 we can control the following microscope features:

• Stage Y Axis movement
• Stage X Axis movement
• Objective Motor (able to select objective)
• Increase/Decrease Light
• Change Light Source
• Raise/Lower Objective

It is in excellent cosmetic condition with minor marks.

Included are the following;

Carl Zeiss Axiovert 200M

Model: Axiovert 200M

Serial#: 3820005950

Objectives fitted:

Zeiss Fluar 5x/0.25

Zeiss Fluar 10x/0.50

Zeiss LD Plan-Neoflaur 20x/0.40 Corr

Zeiss LD Plan-Neoflaur 40x/0.60 Corr

Zeiss EC Plan-Neoflaur 63x/1.25 Oil M27

Zeiss EC Plan-Neoflaur 100x/1,30 Oil

Eyepieces:

W-PL 10x/23 (Qty.2)

P.A.L.M Microlaser Technologies

Model: PALM CombiSystem

Serial#: CSC-01010

Date: 2007

Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, Mouse

Model: Celsius R630

Serial#: YKFU009307

Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.

PC has the following software installed:

Palm RoboSoftware V4

Hitachi HV-D30 Camera

Model: HV-D30P

Serial#: 0675280

Laser Quantum LD3000 power supply

Model: Forte

Serial#: 02165

p                                                  

Zeiss CryLaS FTSS 355-50

Serial#: B594C279

Item powers on and is in full working order.

Communicates with control panel and microscope.

EXFO X-Cite Series 120

Model: XE120-XL

Serial#: 0570

Item is in good cosmetic condition.

Item powers on with light source in full working order.

All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.

Measurements and weight of Melles Griot Optical Table are as follows:

Dx120Wx90Hx77cm

Weight:

Additional Parts & Accessories:

Zeiss AdhesiveCap 500 Clear

PALM MembraneSlides

PALM CombiSystem C User Manuals

PALM DishHolder 50 C

PALM MultiCap Insert 8c

PALM MultiCap Collector D 8C (Qty.2)

PALM CollectorSet SingleTube II 500

PALM CombiSystem User manual (Qty.2)

PALM RoboSoftware Software Guide (Qty.2)

Laser Quantum Forte Operating Manual

PALM MicroBeam Technical Information

Zeiss Axiovert 200 Operating Manual

Zeiss DuplexDish 50 Sterile Packed (Qty.6)

LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)

Zeiss MembraneSlide 1.0 Pen

X-Cite In Control Series 120 User's Guide

Zeiss PALM RoboSoftware CD

PALM MicroLaser System RoboSoftware 4.0 CD

Fujitsu Siemens Product Recovery CD

Carl Zeiss 29 Software Release 4.6

Zeiss Axiovert 200 M/Mat Floppy Disc

3-CCD Color Camera Model HV-D30 Operating Manual

Fujitsu Siemens Celsius Drivers & Utilities CD

Scenview B17-2 CI / B19-2 CI

Carl Zeiss Axiovert 200M Microscope with 4× Objectives, AxioCam & Software

This system was removed from a laboratory where it was surplus to requirements.

It is in good cosmetic condition and in good working order with the accompanying software.

The focus limit has been reset to allow standard slide focusing. To use standard microscope slides, a Zeiss Universal Mounting Frame (471718-0000-000) or similar holder will be required; the microscope is currently fitted with an incubated microplate holder.

Attachments on the Microscope:

• HAL 100
• HBO 100
• Carl Zeiss AxioCam
• Anti-vibration base/stand

Included Objectives:

• Zeiss LD Achroplan 40x/0.60 Korr Ph2 – ∞/0–2
• Zeiss LD Achroplan 20x/0.40 Korr Ph2 – ∞/0–1.5
• Zeiss A-Plan 10x/0.25 Ph1 – ∞/–
• Zeiss A-Plan 5x/0.12 Ph1 – ∞/–

Included Accessories:

• EBQ 100 Isolated – z
• S/N: L 40413359
• Run Hours: 152.1

• Fujitsu Siemens PC running Windows XP
• Dell monitor

Software Included:

• Carl Zeiss Imaging Systems v4.1 International
• Carl Zeiss Imaging Systems v4.0b International
• Carl Zeiss Imaging Systems 34 Software Release 4.8.1
• Carl Zeiss Service Pack 2 for AxioVision 3.0.6
• Carl Zeiss Vision Imaging Systems Licence Disk (Floppy Disk)

Manuals Included:

• Zeiss AxioVision 3.0
• Zeiss AxioCam Installation Manual

UVOCS T16x16/OES/E UV-Ozone Surface Cleaning System

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

Laserscript HPC LASER Ls1290 Laser Engraver w/ Doluyo Laser Water Chiller

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service:  19/01/2026

This system comprises;

• Laserscript HPC LASER Ls1290 Laser Engraver
• Model: Ls1290
• S/N: 18122513

• Doluyo Laser Water Chiller
• Model: DIC002ASL-LA1
• S/N: 7DF050386
• Manufactured: 2015

• Hailea Pump

Olympus CKX53 Microscope with CoolLED pE-300, Olympus DP23 Camera, Lenovo Laptop and 4 Objectives – 2x, 4x, 10x and 20x

This microscope system was removed from a facility after becoming surplus to requirements.

The unit is in good working order. The camera and software have been tested, and Olympus cellSens Entry 4.2.1 is installed on the supplied laptop.

Please note that there is no slide holder included for the stage. The 4x objective is also stuck in the microscope and could not be removed.

Last Service: 21/10/2021

Objectives;

Olympus LUCPlanFLN

20x / 0.45 Ph1

∞ / 0–2 / FN22

Olympus PlanApo N

2x / 0.08

∞ / – / OFN26.5

Olympus UPlanFL N

10x / 0.30 Ph1

∞ / – / FN26.5

Olympus UPlanFL N

4x / 0.13 PhL

∞ / – / FN26.5

Please note: This objective is stuck in the unit.

Manuals and Software;

2 x Olympus CKX53 Culture Microscope instruction manuals

Olympus cellSens Imaging Software, Version 4.1, supplied on disc

Olympus cellSens Life Science Imaging Software user manual

Olympus DP23/DP28 instruction manual

CoolLED pE-300 Series quick-start guide

Olympus cellSens Entry 4.2.1 installed

Accessories;

Lenovo laptop

CoolLED pE-300 control pod

CoolLED pE-300 white illumination system

Olympus DP23 digital microscope camera

Anglia Scientific Shandon AS 325 Microtome Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: This is battery powered and requires AA batteries.

GE Healthcare / Cytiva Xuri Cell Expansion System W25

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility due to not having the required software.

HP Elite desktop PC - No operating system or software included. The PC was left with the system as it may have relevant hardware.

This system was Calibrated on 07.12.23

The Xuri Cell Expansion System comprises the following components:

Xuri Cell Expansion System W25 main unit

Serial No. 2648232. Year 2020

Xuri Cell Expansion System W25 CBCU full unit

Serial No. 2635824 Year 2020

Xuri Cell Expansion W25 Pump

Serial No. 2644380. Year 2020

Xuri Filter Heater

Code No. 29083659

HP Elitedesk desktop PC with no operating system or software

Serial No. CZ009CNKH

HP Keyboard model KU-1156

HP mouse

Part No. 672562-001

Lenovo ThinkVision Monitor

Serial No. V1BWY98

Netgear 8-port gigabit ethernet switch

Serial No. 5UR10650009AB

Also included:

3 x lengths of pump tubing with connecting ends

2 x low voltage power leads

1 x Netgear 18v power adapter

Bruker Vertex 70 (FT-IR) Spectrometer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This Edwards Vacuum Carbon Coater E306 was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test it further at our facility.

It is made up of the following modules;

Edwards 8 Vacuum Pump

Parvalux SD 1C

Edwards AGD

Peak Scientific NM30LA High Purity Nitrogen Generator

This item is being sold on behalf of a client, as it is surplus to requirements.

It is in very good cosmetic condition and fully operational. The unit is supplied serviced and includes a warranty.

Additional services available include installation, demonstration, trial period, and extended warranty—please inquire for further details. A Gas Quality Certificate will be provided upon installation.

It is available for collection from Glasgow, UK.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

BMG Labtech LumiSTAR Omega Luminescence Microplate Reader Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service:  7/17/2025

Nicolet Nexus 870 FT-IR Spectrometer w/ PC & Omnic Version 5.2a Software Lab

This system was removed from a facility where it was surplus to requirement.

The Nicolet Nexus FT-IR  is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

The previous owner stated it was in working order prior to removal.

System includes:

• Nicolet Nexus FT-IR Spectrometer (SN: 470/670/870)

• Tiny PC w/ Microsoft Windows NT Workstation 4.0 1-2 CPU
• Powers on and includes Omnic Version 5.2a software

• Dell E172FPb Monitor

• Netgear Wireless-G router WGR614 v9 (SN: 1W92977U03C2D)

• HP Deskjet 6940 Printer

• Various additional accessories/pieces of software (see photos)
  

Hudson Solo SOL9 Liquid Handler

This item was removed from a university lab where it was surplus to requirements.

The robot is in very good used condition and has been successfully tested for communication with the included

software.

The previous client has confirmed it being in working order.

System Includes:

• 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU)
• 4 x 10cm Tall Nests
• 2 x 6cm Tall Nests
• 1 x 4.5cm Nest
• 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units:
• 1 with a TPS 620-5033 plate
• 1 with a TPS 620-5045 plate
• 2 x PSU's
• 1 x BioShake Heated Shaker Plate (marked as faulty)
• 2 x Boxes of 1000ul Pipette Tips (all sealed inside)
• 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed
• 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Digital CR Reader With Cassettes

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition.

It powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order prior to removal.

No software is included.

S/N: 3985

Perkin Elmer Model Clarus 500 Gas Chromatograph (FID Detector) Lab

This item was removed from a university lab where it was surplus t requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order when it was last in use.

This PALM Laser Microscope Microlaser MicroBeam Zeiss Axiovert 200M P.A.L.M was removed from a university lab where it was surplus to requirements.

The unit powers up and has all motorized and mechanical elements in good working order. It is in good cosmetic condition with only minor marks from use.

Zeiss Axiovert 200M

Model: Axiovert 200M

Serial#: 3820003116

There are 3 x Objectives included, and they are as follows;

Zeiss FLUAR

5x/0.25 ∞/0.17

Oil damaged as shown.

Zeiss FLUAR

10x/0,50 ∞/0,17

Good cosmetic condition.

Eyepieces:

Zeiss W-Pl 10x/23

All additional items included:

PALM Microlaser Technologies MicroBeam

Model: MicroBeam

Serial#: MB03216

Items in good cosmetic condition.

Untested.

Hitachi HV-D30P

Serial#: 0411529

Untested due to not having the cables required.

Jenway 6705 UV/Vis Spectrophotometer

This item was removed from a university laboratory where it was surplus to requirements.

The spectrophotometer is in poor cosmetic condition, with a visible crack on the front (appears to have been repaired with glue by the previous owner) and several scratches and stains that could not be removed.

It has been powered on, but no further testing has been conducted.

The password for the Supervisor Account is available on request.

Specifications:

• Instrument Memory: 968 MB, 99% Free (Files 47)
• Light Source: Xenon
• Spectral Bandwidth: 4 nm
• Stray Light: <0.05% at 220 nm
• Wavelength Range: 320-1100 nm

Model: 6705

Serial No.: 1020

NanoBioAnalytics Ozone Cleaner UVC-1014

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition. Due to safety restrictions on testing Ozone emitting products at our facility, it has not been powered on.

The previous owner stated it was in working order prior to remova

NanoBioAnalytics Ozone Cleaner UVC-1014

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition. Due to safety restrictions on testing Ozone emitting products at our facility, it has not been powered on.

The previous owner stated it was in working order prior to remova

Bio-Rad CHEF-DR III Pulsed Field Electrophoresis Complete System

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

This system comprises;

• Bio-Rad CHEF-DR III Power Module S/N 962BR 1532
• Bio-Rad Variable Speed Pump S/N 260BR 1783
• Bio-Rad Cooling Module S/N 816BR 1173
• Bio-Rad 17023649 S/N 275BR 012277

Foss MilkoScan Minor Model 78110

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Buehler MetaServ 2000 – 200mm – Dual Disc - Single Speed Polishing Machine

This item was removed from a facility where it was surplus to requirement.

It is in good working order.