All Products

£ 510.00 (ex. VAT) 1 in stock

Purite Select Purification System L300150 with Storage Tank Lab

ITEM-35809

Purite Select Purification System L300150 with Storage Tank

This was removed from a university lab where it was surplus to requirements.

The system powers up and pressurises but was not tested further.

It is in reasonable cosmetic condition with marks from use.

Both filters, Pretreat 8 and Puripac PP8 expired 15/02/23

100L Storage Tank

£ 510.00 (ex. VAT) 1 in stock

TQ TD1050 Steam Engine Trainer Teaching Rig

ITEM-31868

TQ TD1050 Steam Engine Trainer Teaching Rig

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in full working order.

System Parts:-

TD1050 General Assembly

TQ160508-001

TD1050 - DTS2 Torque/Speed Display Unit

TQ165554-001

TD1050-DT1 Temperature Display

TQ160508-001

VDAS-F - VDAS Frame Mounted Version

TQ158991-010

Grosvenor Pump

Model - 5520

SN - 21248

Dynatherm Part no. 40993

SN - 13057-1

£ 510.00 (ex. VAT) 1 in stock

Thermo Scientific Lab Fridge ES Series 288R-AEW-TS Lab

ITEM-48665

Thermo Scientific Lab Fridge ES Series 288R-AEW-TS

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good working order.

£ 505.00 (ex. VAT) 1 in stock

Hybaid Maxi 14 Hybridisation Oven Lab

ITEM-26176

Hybaid Maxi 14 Hybridisation Oven

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but may need calibrating to your equipment. It was tested with a digital thermometer (not included).

It is in good cosmetic condition with minor marks.

Internal Dimensions - D34 W34 H50cm

SPARES/REPAIR ITEM

£ 505.00 (ex. VAT) 1 in stock

Airwolf 3D NW3D HDX 3-D Printer Lab Spares/Repairs

ITEM-37979

Airwolf 3D NW3D HDX 3-D Printer Lab

This item was removed from a university where it was surplus to requirement.

The back panel is missing and, the wires are exposed, resulting in a visual PAT fail.

Due to the condition stated above, this item is listed as Spares/Repair.

Also included are the following:

Power lead
Data cable

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Pyris 1 Differential Scanning Calorimeter Spares/Repair Lab

ITEM-49088

Perkin Elmer Pyris 1 Differential Scanning Calorimeter

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display shows “No Calorimeter Board” and the buttons are unresponsive, preventing any further testing.

The lens covering the digital display has also come unstuck.

Due to these issues, the item is listed for spares or repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

ITEM-48683

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, unable to test due to the power supply not being included.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Lab Fridge ES Series 288R-AEW-TS Lab

ITEM-48664

Thermo Scientific Lab Fridge ES Series 288R-AEW-TS Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

2 x Multi-Tier Rack Laboratory Trolleys

ITEM-39960

Multi-Tier Rack Trolley x 2

This item was removed from a university lab where it was surplus to requirements.

Feature 3 graduated shelves.

Both trolleys are in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump Spares/Repair Lab

ITEM-48347

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on; however, the previous owner has stated it is faulty, with the fault unspecified. Supplied with cables for connecting to the rest of a system, along with an Automatic Backpressure Valve (PN-900-13702-000).

Includes:

Cables for system connection
Automatic Backpressure Valve (PN-900-13702-000)

£ 500.00 (ex. VAT) 1 in stock

Lot of 5 Medical Examination Couches

ITEM-48819

Job Lot of 1 x Electric Tilt Table & 4 x Medical Examination Couches

This job lot was removed from a university laboratory where it was surplus to requirements.

The lot includes four manual examination couches from Medical Equipment Supplies Ltd and one electric tilt table from Akron Therapy Products Ltd (Model: 9622, Serial No.: 95092 9542).

The manual couches do not have model numbers visible and two headrests are missing. One couch is missing two wheels. The electric tilt table is missing a rod on the right-hand side which supports the right footrest, causing it to be loose.

All beds are functional. The electric bed has been tested and all movements operate correctly.

Approximate height ranges:

Manual couches: 45–90 cm (floor to bed)
Electric tilt table: 48–85 cm (floor to bed)

The beds show cosmetic wear with several rips and tears to the upholstery. Some denting in the foam has occurred from storage but is expected to recover over time.

In functional condition with cosmetic wear consistent with use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Bright Instrument SC12CL 5030 Microtome Cryostat Spares/Repair

ITEM-48821

Bright Instrument SC12CL 5030 Microtome Cryostat – Spares/Repair

This item was removed from a university where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however, during temperature testing the system did not begin cooling.

Therefore, it is listed as Spares/Repair.

Model: SC12CL 5030

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Genevac VC3000TA Vapour Condenser Spares/Repair Lab

ITEM-48656

Genevac VC3000TA Vapour Condenser Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, but was unable to be tested as it requires connection to a Genevac Centrifugal Evaporator. (Not included)

Additionally, the previous owner notified us that it was faulty, although the fault was not diagnosed,

It is therefore listed as Spares/Repair

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Genevac HT-8 Series II Centrifugal Evaporation System Accessories Spares/Repair

ITEM-48655

Genevac HT-8 Series II Centrifugal Evaporation System Accessories Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but does not power on.

Therefore, it is listed as Spares/Repair.

Box of Accessories includes:

Tube racks / sample holders: 5 unwrapped, 11 wrapped in bubble wrap, 6 in the centrifuge, and 2 in the centrifuge from an HT I Series.
Rotor buckets: 23 in total, assorted sizes and shapes.
Lamps: 5 unboxed and 3 packaged Xenophot 64695 HLX bulbs.
Cables and tubing: Vacuum hose and electrical connection cables for the HT-8 system (connects to condenser and vacuum pump).
Spare parts: O-rings, gaskets, and seals in labelled bags.
Software & accessories: Control/driver CD and clear acrylic protective plates.

£ 500.00 (ex. VAT) 1 in stock

Genevac Technologies Table Lx130 Wx70 Hx82 cm Lab

ITEM-48653

Genevac Technologies Table (Lx130 x Wx70 x Hx82 cm)

This item was removed from a facility where it was surplus to requirements.

It was previously used with a Genevac VC3000TA and Genevac HT-8 system, with a vacuum pump mounted underneath.

The table remains in relatively good condition overall, with some areas of surface rust present.

£ 500.00 (ex. VAT) 1 in stock

Dudley Safes Heavy Duty Safe w/ Key

ITEM-42992

Dudley Safes Heavy Duty Safe w/ Key

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

1 x Key

£ 500.00 (ex. VAT) 1 in stock

8 × Hounsfield Tensometer Type W Tensile Machines

ITEM-47708

8 × Hounsfield Tensometer Type W Tensile Machines

These items were removed from a university where they were surplus to requirements.

They are in good cosmetic condition and in good mechanical order.

The previous owner reported that they were mechanically operational but experienced issues with upgraded electronics.

Originally, they were designed as fully mechanical systems.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Statebourne Cryogenics Liquid Nitrogen Refrigerator BM12 Faulty Lab

ITEM-48690

Statebourne Cryogenics Liquid Nitrogen Refrigerator BM12 S/R Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but the lid does not close properly. The previous owner has stated that the unit is not working.

Due to these issues, it is listed for spares or repairs.

Model: BM12 S/R

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 2L Floor Standing Centrifuge w/ Rotor Lab

ITEM-48544

MSE Mistral 2L Floor Standing Centrifuge w/ Swing-Out Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

£ 500.00 (ex. VAT) 1 in stock

Particle Measuring Systems PMS Liquilaz-E20-WN-HF W/ Enclosure

ITEM-48543

Particle Measuring Systems Liquilaz-E20-WN-HF with Enclosure

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. We were unable to identify the laser classification.

Due to testing limitations with Class 3 and above lasers at our facility, the unit has not been powered on or functionally tested.

Includes:

PMS Aqua NEMA enclosure
PMS Liquilaz-E20-WN-HF particle counter

Model: Liquilaz-E20-WN-HF

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wheaton 753684-D 9 Deck R2P Roller Incubator Spares/Repair Lab

ITEM-46315

Wheaton 753684-D 9 Deck R2P Roller Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers on; however, during testing it took approximately 5 hours to reach 37°C, with a maximum recorded temperature of 57°C despite being set to 60°C.

Internally, it houses a Wheaton Modular Cell Production Roller Apparatus Model 3. The roller mechanism powers on, but the rollers moved very slowly during testing. The speed control dial is missing, and manually adjusting the underlying nut did not improve the speed.

Due to the above issues, this item is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SMS Sheath Maintenance Unit Spares/Repair Lab

ITEM-45396

Beckman Coulter SMS Sheath Maintenance Unit

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but does not power on.

Therefore, it is listed as Spares/Repair.

Specifications:-

Model: SMS Unit
S/N: 739

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model MDF-U730M Biomedical Freezer Lab

ITEM-44674

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Type MDF-U730M Biomedical Freezer Lab

ITEM-44675

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Agilent 2100 G2939A Bioanalyzer System & DNA Chips Spares/Repair Lab

ITEM-48419

Agilent 2100 G2939A Bioanalyzer System & Accessories Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however it could not be fully tested as two channels show high leakage currents.

Therefore, it is being sold as spares or repair.

Includes:

1 box x High Sensitivity DNA Chips (5 in box) – expires Jan 2026
1 box x High Sensitivity DNA Chips (10 in box) – expires Jan 2026
1 box x Electrode Cleaners (5 in box)
1 box x Chip Priming Station
1 x Bayonet Electrode Cartridge (in blue case)
1 box x 11 Syringe Kits
1 box containing Test Chip Kit/Electrode/Diode Test Chip & USB 2.0 Cable

Model: 2100 Bioanalyzer

Serial No.: DE13805731

Product No.: G2938C

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

ITEM-48418

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Platform: Floor Prep
Rotor Type: Swinging-Bucket (Ultracentrifugation)
Maximum RPM: 40,000 rpm
Max g-Force: 285,000.00
k-Factor: 137
Number of Tubes: 6×14 mL / 14×95 mm(6×14 mL / 1×4 in)

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

ITEM-48416

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Rotor Type Ultra – Swinging Bucket
Maximum Speed 41,000 rpm
Maximum RCF at r max (g) 288,000 x g
k-Factor 124
Rotor Material Titanium
Bucket Material Titanium, Anodized Aluminum Cap

£ 500.00 (ex. VAT) 1 in stock

Granite Microscope Table Air Anti Vibration Table (150 L x 80 W x 77 H cm) Lab

ITEM-48388

Microscope Table Air Anti Vibration Table 150 L x 80 W x 77 H cm Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

Hole measurements:

20 x 15 cm
10 x 10 cm

£ 500.00 (ex. VAT) 1 in stock

15 x VWR Maxi 20 Electrophoresis Horizontal Gel Tanks Lab

ITEM-48382

15 x VWR Maxi 20 Electrophoresis Horizontal Systems

These items were removed from a university lab where they were surplus to requirements.

All units are in fair cosmetic condition.

Includes:

Wires and accessories for each system
Manuals

£ 500.00 (ex. VAT) 1 in stock

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

ITEM-48344

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

Please note; The Cartridges and Filters require replacement as the current ones have expired.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hermle Z 300 K Centrifuge - Spares/Repair Lab

ITEM-47684

Hermle Z 300 K Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and shows minimal wear.

However, during testing it failed to reach the set temperature, stabilizing at 25°C, and did not achieve the rotor’s maximum speed of 5000 RPM, reaching only 4000 RPM.

Therefore, it is listed as spares/repair.

Model: Z 300 K

Serial No.: 55060105

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Motic AE 2000 Inverted Microscope w 4 x Objectives 4/10/20/40x LWD Spares/Repair

ITEM-47616

Motic AE 2000 Inverted Microscope with 4 x Objectives (4x, 10x, 20x LWD, 40x LWD)

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in good cosmetic condition, but is not functional due to an internal fault.

Includes objectives:

Motic 4X/0.1 ∞/-
Motic 10X/0.25 Ph1 ∞/1.1
Plan LWD 20X/0.3 Ph1 ∞/1.1 WD4.7
Plan LWD 40X/0.5 ∞/1.1 WD3.0

£ 500.00 (ex. VAT) 1 in stock

Stratasys Objet30 3D Printer 2011

ITEM-47605

Stratasys Objet30 3D Printer

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, the client stated it was in good working order prior to removal.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Julabo FL300 Recirculating Chiller - Spares/Repair Lab

ITEM-47581

Julabo FL300 Recirculating Chiller – Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit shows minimal wear, with both of the top catches on the lid broken; this does not affect physical operation of the doors.

The cable is damaged, and the unit will not power on, so it is being sold for spares or repair.

Model: FL300

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter System Gold 126 Solvent Module, 127 Solvent Module, 116 Detector

ITEM-47512

Beckman Coulter System Gold 126 & 127 Solvent Modules with 166 Detector

This system was removed from a university laboratory where it was surplus to requirements.

All three units power on and are in good cosmetic condition with minimal wear. The system could not be tested further in our facility.

Includes:

Beckman Coulter System Gold 126 Solvent Module
Model: 126 Solvent Module
Serial No.: 513-2525
Beckman Coulter System Gold 127 Programmable Solvent Module (Version 1.3)
Model: 127 Programmable Solvent Module
Serial No.: 125-1053
Beckman Coulter System Gold 166 Detector
Model: 166 Detector
Serial No.: 423-2320

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab Spares/Repair

ITEM-47421

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge displays an E33 error, indicating a fault with the main board. The working condition of the remaining parts is unknown:

2 x Lid locks (at least one reported to have an issue)
1 x Motor
1 x Compressor
1 x Display board
1 x Temperature sensor

Due to the issues stated above, this centrifuge is listed as Spares/Repair.

Please note: There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab Spares/Repair

ITEM-47420

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The casing is in good used cosmetic condition. However, following internal components have been removed:

2 x lid locks/mechanisms
1 x motor

The main board is present but faulty and displays an E33 error on startup. The condition of other internal components—including the compressor, display, and temperature sensor is unknown and has not been tested.

Therefore, it is listed as Spares/Repair.

Please note: There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Millipore Guava easyCyte 8HT Flow Cytometer Spares/Repair Lab

ITEM-47332

Millipore Guava easyCyte 8HT Flow Cytometer – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

The DSP board and motion board have been replaced, with firmware and software updated to version 3.1.1. The tray was realigned following the motion board replacement, and the lasers have been recalibrated.

The red laser is operating at half power and has been disabled, so the system can run correctly on the blue laser, which is currently passing electronic checks. GuavaSoft 3.1.1 is installed.

Please note: The laptop containing the installed software has a damaged screen, so an external monitor is required for operation. Monitor not included.

It is in spares/repair condition due to the red laser requiring replacement.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Physica MCR 301 Anton Paar Modular Compact Rheometer Spares/Repair

ITEM-47201

Physica MCR 301 Anton Paar Modular Compact Rheometer Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, however, it does not power on due to a suspected motherboard fault.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Allegra X-22R Benchtop Centrifuge Spares/Repair Lab

ITEM-47198

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.

Therefore, this item is being sold strictly as Spares/Repair.

Includes:

Beckman Allegra X-22R unit only (no rotor or accessories included)

£ 500.00 (ex. VAT) 1 in stock

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

ITEM-47154

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller Spares/Repair Lab

ITEM-47102

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition; however, it cannot be powered on due to the absence of a plug and a split in the flex exposing the internal wires.

It is therefore sold as spares or repair.

Includes:

Carl Zeiss Surgical Microscope
Metz NAG 80 VA Controller

£ 500.00 (ex. VAT) 1 in stock

Lasos LGN 3000 PSU & LGK 7812 ML4 450-530NM Laser

ITEM-47067

Lasos LGN 3000 PSU & LGK 7812 ML4 450-530NM Laser

This system was removed from a university laboratory where it was surplus to requirements.

The PSU powers up successfully; however, the laser itself has not been tested. Both the PSU and laser are in good used cosmetic condition and were originally spares from a Zeiss LSM510 system.

Includes:

Lasos LGN 3000 Power Supply Unit
Lasos LGK 7812 ML4 Laser (450-530NM)

Model: LGN 3000 / LGK 7812 ML4

£ 500.00 (ex. VAT) 1 in stock

Labsystems Luminoskan Ascent Microplate Reader Type 392 Lab

ITEM-46937

Labsystems Luminoskan Ascent Microplate Reader Type 392 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-28S Floor-Standing Centrifuge Spares/Repair Lab

ITEM-46923

Sorvall RC 28S Floor-Standing Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, testing could not be completed due to an on-screen error that prevented further operation, and prevented a vacuum from being drawn.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP 3,700 rpm Rotor

ITEM-46920

Eppendorf A-2-DWP Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was unable to be tested further.

Specifications:

Maximum speed: 3,700 rpm
Maximum RCF: 2,250 × g
Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

ProteinSimple FluorChem E Imaging System Spares/Repair Lab

ITEM-46915

ProteinSimple FluorChem E Imaging System

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition. It powers on with "ProteinSimple" background and functional touchscreen/mouse.

Additionally, it emits an unhealthy noise when powered and the UV transilluminator does not appear to activate,

Therefore, it is listed as Spares/Repair

The previous owner stated the following: UV gel scanner, "lights half of the gel" and may need attention.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Link Analytical eXL Model 1100-012 X-Ray Imaging & Analysis System Spares/Repair

ITEM-46803

Link Analytical eXL Model 1100-012 System

This system was removed from a university laboratory where it was surplus to requirements.

The main eXL unit initially powered on, supplied power to the monitor, and displayed startup errors (see photos), but the keyboard and mouse were unresponsive. Upon restarting, the monitor and indicator lights did not power up, although internal computer activity could still be heard. Further attempts to power cycle the system were unsuccessful.

Therefore, this system is listed as Spares/Repair.

It is in good overall cosmetic condition.

The system comprises the following:

Link Analytical eXL
Model: 1100-012
Serial No.: 2917
Link Analytical Monitor
Model: CLR 1401
Serial No.: 2665
Link Analytical Keyboard
Model: 1487
Serial No.: 2763
Link Analytical Mouse and Mouse Mat
Link Analytical Printer (Epson LQ-500)
Model: P78PA
Serial No.: T0011258
*Note: Printer would fail PAT due to a missing rear cover
(Box of printer paper included)

Included Manuals:

Link Analytical eXL System Service Manual
Link Analytical Disk, Tape & File Sequel, Sequences, Display & Hard Copy, Genie, Video Frame Grabber
Link Analytical Getting Started – X-Ray Analyser, System Manager, RTS-2/FLS, Auto
Link Analytical Computer System & Electron Diffraction Pattern Analysis
Link Analytical Analysis & Imaging
Link Analytical Quantitative Mapping Operators Manual

Accessories and Additional Parts:

Box of 10 floppy disks
Labelled black 'X-Ray' cables and a grey monitor cable (collected as connected)
2 x Tracor Northern IPP Series II X-Ray Analyzer Operator Manuals
3 x Digital software disks (in blue cases – large format)
GEMS Sensor – P/N 197093-RS (white)
Unidentified round metal part
Boxed metal piece labelled "Scintillator" (assy – ME 0084)
Metal part tagged "X-Ray Source XA2-57"
Metal part with Watec WAT-902B CCD Camera and:
Objective lens: M Plan APO 10 SB 0.23 ∞/0 SLWD 39
Metal piece with part number AG61-113 etched at the base
Orange cable marked "AML J011 034"
Black light source
Various other cables (not compatible with the eXL)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Varian 4000 GC/MS Gas Chromatograph 3800/3380 Spares/Repair Lab

ITEM-46774

Varian 4000 GC/MS Gas Chromatograph 3800/3380 Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirements.

The previous owner has stated that various internal parts were removed.. Additionally, it is a visual PAT fail due to the top panel being removed.

Therefore, it was not powered on, and is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

UniSense Fertilitech Embryoscope ES-D Spares/Repair Lab

ITEM-46714

UniSense Fertilitech Embryoscope ES-D Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.