All Products

£ 500.00 (ex. VAT) 2 in stock

3B Scientific Physics 580 TEL-X-OMETER X-Ray Spectrometer

ITEM-49193

3B Scientific Physics 580 TEL-X-OMETER X-Ray Spectrometer

This item was removed from a university where it was surplus to requirement.

It has not been powered on at our site due to safety limitations with X-ray equipment.

It is in good cosmetic condition.

Includes a set of keys.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

PicoTrace Control Enclosure with Bentrup TC805 and Siemens Micromaster

ITEM-47767

PicoTrace Control Enclosure with Bentrup TC805 and Siemens Micromaster

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in poor condition with visible wear and missing components, including three rails that secure the doors, one large door, and the top lid that covers the electrics and fan. Due to the missing lid, the item has not been powered on for safety reasons.

Therefore, it is listed as Spares/Repair.

According to the previous owner, the unit was reported to be in working order before being moved from the lab but requires replacement of two or three small plastic pins that secure the panel seams, which cracked during transit.

Included internal components:

Bentrup TC805-X-3 (Model: TC805-X-3, Serial No.: 024546)
Bentrup TC805-X-3-PT100 (Model: TC805-X-3-PT100, Serial No.: 027021)
Siemens Micromaster (Model: Micromaster, Serial No.: XAK221MM326B)
Schmersal 3JB (Model: 3JB, Serial No.: N/A)

£ 500.00 (ex. VAT) 1 in stock

Dionex GP50 Gradient Pump w/ Accessories Lab

ITEM-48617

Dionex GP50 Gradient Pump with Accessories

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition and powers on.

The screen remains slightly dark on the left side when powered on and the front door is broken and does not fit correctly.

Includes:

Dionex GP50
4x Schott-Duran 1000 ml bottles with stoppers adapted for pump tubes
2x Dionex bottle carriers (one fitted with a pressure gauge)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Cytiva F9-T AF Fraction Collector - Spares/Repair Lab

ITEM-48713

Cytiva F9-T AF Fraction Collector - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however it has a faulty drive motor.

It is therefore listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Aimsizer AS-100 Density Tester Lab

ITEM-48839

Aimsizer AS-100 Density Tester Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with some surface rust visible.

It powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

ITEM-47640

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the display screen does not power on.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Scanbur Warming Cabinet Type-48-VS-III Lab

ITEM-44883

Scanbur Warming Cabinet Type-48-VS-III Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, other than tape holding on a damaged alarm light cover.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Dionex Ultimate 3000 RSLCnano System - Spares/Repair Lab

ITEM-47660

Dionex Ultimate 3000 RSLCnano System – Spares/Repair Lab

This system was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and powers on. During testing, the following error was displayed: “A temporary Power Failure has occurred.”

Therefore, this system is listed for spares or repair.

Also included;

6 x Various Sized Reagent Bottles.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge 5810 R w/ Eppendorf A-4-81 Rotor Spares/Repair Lab

ITEM-47794

Eppendorf 5810 R Refrigerated Centrifuge - Spares or Repair

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition but does not power on, likely due to a suspected motherboard fault. Therefore, it is being sold as Spares or Repair.

Includes:

4 x Swinging Buckets (Eppendorf 09/04 – Max Load 780g)
8 x Sample Holders (5-hole, 3cm diameter)
4 x Sample Holders (1-hole, 6cm diameter)
1 x Sample Holder (12-hole, 2cm diameter)

£ 500.00 (ex. VAT) 1 in stock

Bio-Rad TC20 Automated Cell Counter Lab

ITEM-48951

Bio-Rad TC20 Automated Cell Counter Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, the power supply is not included. (Tested with in-house 12V 2.5A Centre Positive Supply)

Includes;

4 x Boxes of Slides for Cell Counting

£ 500.00 (ex. VAT) 1 in stock

Sebia Hydrasys Focussing Agarose Gel Electrophoresis System w/ Accessories Lab

ITEM-48948

Sebia Hydrasys Focussing Agarose Gel Electrophoresis System w/ Accessories Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

Accessories:

Hydrasys Programmer and Key Card
5 x Hydragel 7 ISO-PAL Plastic Mask (55 x 42 mm)
5 x Thin Filter Paper (Green) (52 x 83 mm)
3 x Thick Filter Paper (Orange) (52 x 83 mm)
2 x Thin Filter Paper (Pink) (83 x 103 mm)
8 x Gel Support Cards
1 x Applicator Electrode Carrier (REF 1279)
2 x Casting Trays
3 x Boxes of Gel Combs of varying sizes
2 x Accessory Kit (REF 1251)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hewlett Packard 1050 Series HPLC System with VW Detector, Pump, Autosampler S/R

ITEM-47681

Hewlett Packard HP 1050 Series HPLC System

This system was removed from a university laboratory where it was surplus to requirements.

The system has not been powered on and is in poor condition, with significant cosmetic wear. Several panels and screens are loose due to broken internal clips. The previous owner stated the system is faulty, although the fault has not been verified.

It is therefore listed as spares or repair.

Please note: The Password and Username for the Prime software are not available.

The system comprises the following:

1 × Hewlett Packard Variable Wavelength Detector (Model: 79853C#/004, Serial No.: 3334J03749)
1 × Hewlett Packard Autosampler
1 × Hewlett Packard Quaternary Pump
1 × Hewlett Packard Column Compartment with Solvent Tray (Model: 79856AX, Serial No.: 3216G04683)

Includes:

AcerPower S Series PC running Windows XP with Prime software installed (login unavailable)
Acer AL511 monitor
Fujitsu keyboard
Compaq mouse
HPLC Technology Analog Signal

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hewlett Packard HP 1050 Series HPLC System Detector 79853C, Pump Autosampler S/R

ITEM-47680

Hewlett Packard HP 1050 Series HPLC System Detector 79853C, Pump, Autosampler

This system was removed from a university laboratory where it was surplus to requirements.

The system has not been powered on and is in poor condition, with significant cosmetic wear. Some panels and screens are loose due to broken internal clips. The previous owner stated the system is faulty, although the fault has not been verified.

It is therefore listed as spares or repair.

Please note: The Password and Username for the Prime software, is not available.

The system comprises the following:

1 × Hewlett Packard Variable Wavelength Detector (Model: 79853C#/004, Serial No.: 3225JO1856)
2 × Hewlett Packard Autosampler
1 × Hewlett Packard Quaternary Pump
1 × Hewlett Packard Column Compartment with Solvent Tray (Model: 79856AX, Serial No.: 3216G05079)

Includes:

Viglen Genie P3 733 running Windows 2000 with Prime software installed
Sony monitor
Unbranded keyboard
Microsoft mouse

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter JLA-10.500 Rotor

ITEM-46322

Beckman Coulter JLA-10.500 Rotor w/ 6 x Expired Biological Safety Canisters

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

Rotor specifications;

Model - JLA-10.500
Max RPM - 10,000.
Max RCF - 18,600 x g.
k Factor - 2,850.
Tube Number / Volume / Size / Dimensions: 6 x 500 mL. 69 x 160 mm. 2.75 x 6.5 in.
Max Rotor Capacity - 3L.
Weight - 19.7 kg.

£ 500.00 (ex. VAT) 1 in stock

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

ITEM-46240

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

This item was removed from a laboratory where it was surplus to requirements.

The shaker powers on and operates at the maximum RPM of 400. It is in reasonably good cosmetic condition.

Model: AK-82

£ 500.00 (ex. VAT) 1 in stock

Sanyo Incubator Model-MIR162 Lab

ITEM-46408

Sanyo Incubator Model-MIR162 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

3 shelves (47 x 43 cm)
Manuals
Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder KB 240 Refrigerated Incubator Spares/Repair Lab

ITEM-42729

Binder KB 240 Refrigerated Incubator

This item was removed from a facility where it was surplus to requirement.

The unit powers on, and the screen is functional.

However, temperature settings could not be adjusted during testing, and the unit did not rise above ambient temperature when left running.

Therefore, it is listed as Spares/Repair.

Includes:

Four internal shelves

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

ITEM-42723

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

£ 500.00 (ex. VAT) 1 in stock

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

ITEM-42425

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

This item was removed from a university lab where it surplus to requirement.

It is good cosmetic condition and good working order.

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C - Spares/Repair Lab

ITEM-40009

Thermo Scientific Cytomat 24 C Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The unit connects via COM port when linked to a PC running Cytomat software. (not included)

However, it does not execute commands and displays errors within the software, indicating potential internal faults.

As such, this item is listed as spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.

The door seal and latch are both in good cosmetic condition.

This item includes 4 x Shelves and a Humidity Pan.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber Lab Faulty

ITEM-37811

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

It was successfully temperature tested, however, during further testing it failed to retain humidity.

Therefore, it is listed as Spares/Repair.

It has been recently fitted with a new element.

Eurotherm 220 8E controllers for temperature and humidity

Two compartments of size 65cm x 49cm x 20cm (l x w x h)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

ITEM-39716

Lab Companion IS-971R Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.

It is in good cosmetic condition with minor marks

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

ITEM-39911

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The system is faulty and requires a new controller.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40991

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40992

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

SLS Lab Pro INC8017 Incubator Spares/Repair Lab

ITEM-46085

SLS Lab Pro INC8017 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The incubator powers on but is in poor cosmetic condition, and emits loud noises at higher temperatures, leading to it being turned off for safety reasons.

There are structural issues as well. The wheels are broken, and the doors are misaligned, requiring them to be manually lifted to lock properly.

Due to the issues listed above, this incubator is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5510E Incubator Lab Spares/Repairs

ITEM-46172

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Magnetron Sputter Banking Plate 10 inch

ITEM-47782

Magnetron Sputter Banking Plate 10 Inch

This item was removed from a facility where it was surplus to requirements.

The plate features both rubber O-rings, which are in good condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

YSI 2300D 110V STAT Plus Glucose Lactate Analyzer Lab Spares/Repairs

ITEM-45171

YSI 2300D STAT Plus Glucose Lactate Analyzer Lab

This item was removed from a university laboratory where it was surplus to requirements.

When powered on, the unit only emits beeps and the screen remains non-functional.

This unit is currently set for 110v.

This issue persists even after testing with a replacement screen, suggesting a possible fault in the main board.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Aviso TheOnyx Liquid Handling System - Spares/Repair Lab

ITEM-48824

Aviso TheOnyx Liquid Handling System – Spares/Repair Lab

This system was removed from a university where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition. However, the previous owner reported that it is faulty, though no further details were provided.

It is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Chemagic 360 DNA Nucleic Acid Extractor Magnetic Separator S/R

ITEM-48658

Perkin Elmer Chemagic 360 DNA Nucleic Acid Extractor Magnetic Separator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition; however, the feet are broken, which affects the unit’s stability.

The item includes a box of accessories and a PC with Chemagic 360 software installed.

The PC has been connected to the unit but is currently experiencing technical issues. It becomes stuck in a loop while attempting to install the latest Windows updates and repeatedly fails to install the required USB-Serial drivers. Although the Chemagic software opens, it displays an error message stating: “Unable to connect to COM-Port.”

It is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Intracel Anti-vibration Table Metric - Spares/Repair

ITEM-49222

Intracel Anti-vibration Table Metric - Spares/Repair

This item was removed from a university where it was surplus to requirement.

Item is in poor cosmetic condition with significant rust on the table top.

The client has stated that one of the gas pipes supplying nitrogen to the table is faulty, but this can most likely be repaired easily with consumable parts.

Therefore, it is listed as Spares/Repair.

Work-surface is 75 x 90cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific VersaCool Refrigerated Circulating Water Bath Spares/Repair

ITEM-24423

Thermo Scientific VersaCool Refrigerated Circulating Water Bath Spares/Repair

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed to load past the loading screen.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Hygromatic Wall Mounted Steam Humidifier Model C06-C / 380

ITEM-42544

Hygromatic Wall Mounted Steam Humidifier Model C06-C / 380

This item was removed from a university laboratory where it was surplus to requirements.

The unit powered on successfully, displaying version 1.09eT, and passed two internal self-tests. T

he pump activated briefly as part of the startup sequence. The function keys responded as expected, allowing access to various system parameters including steam output and operational modes. No further functional testing was carried out.

In very good cosmetic condition.

Includes:

3 x water-steam pipes
1 x used O-ring set (Part No. 3216071)
Fitted with a 16 amp 5-pin red plug

Specifications:

Steam output: 6 kg/hr
Steam hose connection: 25 mm
Condensate connection: 12 mm
Water supply pressure: 1–10 bar
Suitable water types: fully demineralised, softened tap water, or normal tap water (in soft water areas)

Model: C06-C / 380

Serial No.: 1002107

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab

ITEM-49280

Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on. It requires a new motor control PCB.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 14 in stock

Medium Lasermet Heavy Duty Laser Blocking Screen 124x65x199 cm

ITEM-43133

Lasermet Heavy Duty Laser Blocking Screen – Good Condition

This item was removed from a university laboratory as surplus to requirements.

The unit is mostly in good cosmetic condition with minimal wear; however, some panels show minor dents and scratches consistent with previous use.

Suitable for all laser wavelengths.

The screen is labelled with the following irradiated area performance levels:

Irradiated Area PEL (T3) 10s PEL (T2) 100s
4 mm² 61MW/m² 34MW/m²
2000 mm² 2.7MW/m² 1.5MW/m²

Model: Laser Blocking Screen

Please note: As multiple units are available, the item you receive may have minor cosmetic differences from the one shown in the listing imag

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 Incubator - Spares/Repair Lab

ITEM-43005

Binder CB 150 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and has been successfully temperature tested, however the CO2 system does not inject.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hiden Analytical Mass Spectrometer MSIU/4 Ion RF Head HAL 511 S/2 S/R

ITEM-49024

Hiden Analytical Secondary Mass Spectrometer and Ion Counting RF Head

These items were removed from a university laboratory where they were surplus to requirements.

It has failed an insulation test during Class 1 PAT testing and therefore could not be powered on. For this reason, it is being listed as Spares/Repair.

In overall good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu Total Organic Carbon Analyzer TOC-4200 Spares/Repair Lab

ITEM-46209

Shimadzu Total Organic Carbon Analyzer TOC-4200

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in fair cosmetic condition externally, but the internal condition is poor. The cut cable is an IEC cable.

The following errors were noted during testing, as well as required consumables. - Due to the errors listed, this system is listed as Spares/Repair.

Errors:

8PORT VALVE
DEHUM FAN

Requires Consumables:

CO2 ABS1
CO2 ABS2
PLUNGER TIP
CATALYST

Model: TOC-4200

£ 500.00 (ex. VAT) 1 in stock

Leybold TurboTronik NT 151/361 Pump Controller Lab

ITEM-49037

Leybold TurboTronik NT 151/361 Pump Controller Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Essen BioScience IncuCyte Zoom Live Cell Analysis System Spares/Repairs

ITEM-49714

Essen BioScience IncuCyte Zoom Live Cell Analysis System – Spares/Repairs

This system was removed from a facility where it was surplus to requirements.

Items have been identified by the previous owner as Spares or Repairs / For Parts Only.

The system powers on, but no further testing has been performed.

The IncuCyte Zoom Cell Analyser is in poor cosmetic condition.

The Controller is in slightly better overall cosmetic condition.

The controller includes a locking mechanism, but no keys were provided (the unit is currently unlocked).

The analyser units include the following microplate holder arrangements:

IncuCyte Zoom Analyser S/N 45638 contains 3 microplate holders
IncuCyte Zoom Analyser S/N 45358 contains 2 microplate holders (one holder missing)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump Spares/Repair Lab

ITEM-48347

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on; however, the previous owner has stated it is faulty, with the fault unspecified. Supplied with cables for connecting to the rest of a system, along with an Automatic Backpressure Valve (PN-900-13702-000).

Includes:

Cables for system connection
Automatic Backpressure Valve (PN-900-13702-000)

All Products

Filters