Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore, it is listed as Spares/Repair.

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault.

Therefore, it is listed as Spares/Repair.

Jouan Refrigerated Centrifuge  Model - CR412 with 4750RPM Rotor & Inserts Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted.

Therefore, this item is sold as Spares/Repair.

Heraeus Instruments Labofuge 400R Function Line Lab

This item was removed from a university where it was surplus to requirement.

It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested.

Therefore, it is listed as Spares/Repair.

Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

The unit was removed from a university lab. It has not been tested at our facility.

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

Enraf Nonius Goniometer Control Unit

Type 0590.821

Serial No. 042

Enraf Nonius main processing unit

Type 1546.801

Serial No. 19-19

Jobin Yvon Horiba PC without HDD

Bruker Nonius X-Ray Control

Type 1590.830

Serial 24-04

Enraf Nonius Delft x-ray station with Thomson Tubes X-Ray Head

Enraf Nonius Pocket Terminal

Serial No. 69786R

2 x Huber mechanical adjusting blocks

Part Nos. D83253 D8219

4 x Software disks Cad4- PC Software V1.5c 3.5

Connecting cables and data leads

Miele Professional Dishwasher  GG05

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested.  The inlet pressure is sufficient, the filter has been checked, cleaned and the propeller adjusted but shows an error  404 message which indicates there is an inlet issue.

It is sold for spares/repairs as it needs a new inlet.

Eppendorf Realplex 4 MasterCycler Epgradient S Real Time Cycler 96-Well

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however it does not include the required controller. We made several attempts to connect it to the software from another unit (not included), but it would not communicate Therefore, it is listed as Spares/Repair.

Includes an Eppendorf USB drive with pre-installed software and a digital user manual.

Binder KB 240 Refrigerated Incubator

This item was removed from a facility where it was surplus to requirement.

The unit powers on, and the screen is functional.

However, temperature settings could not be adjusted during testing, and the unit did not rise above ambient temperature when left running.

Therefore, it is listed as Spares/Repair.

Includes:

• Four internal shelves

Beckman Coulter Cytomics FC 500 Cytometer

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in reasonably good cosmetic condition but does not power on. Internal inspection revealed significant dirt and debris, which may have caused internal damage.

The system was cleaned internally to the best extent possible without disassembly.

The previous owner has stated the system is from around 2005 and has not been run for 4–5 years. When last operational, most components were functional except for the Pressure Regulator control board and the control PC, which had failed.

Due to the issues stated above, this item is listed as Spares/Repair.

Includes:

• Cytomics FC 500 Cytometer
• Model: FC 500
• Serial No.: AG33131
• Assembly No.: 6707249
• Cytomics FC 500 Power Supply
• Model: FC 500
• Serial No.: AG30136
• Assembly No.: 6807323
• JDS Uniphase Laser
• Model: 1145P
• Serial No.: 2001924

Software Disks:

• FC 500 With MPL System Software, Version 1.0-00
• FC 500 CXP System Software:
• Program Disk 1, Version 2.1
• Program Disk 1, Version 2.2
• Program Disk 2, Version 2.1
• Program Disk 2, Version 2.2
• Multilingual Help, Version 2.0 (3 copies)
• Operator Manuals:
• 2 copies (REF: 773149A)
• Clinical Chemistry Reagent Guide:
• OSR00028, CD Version 5, Reagent Guide Version 11
• DTX Coulter Flow Centre P4 Workstation Recovery Image Kit (2 copies)
• Guava Technologies CytoSoft Software, Version 5.2
• Miscellaneous branded CDs (Maxwell CD-R 80 XL-S 700MB, Verbatim DataLifePlus CD-R 80)

Accessories:

• 2 x Tubing .082IDX.144OD WHT
• 2 x TBG, SILICONE; & TUBING, PUL
• 1 x &TUBING, POLYURETH,. 082
• 1 x TUBING .145ID X.250+-005
• 1 x HARDWARE, MISC;LATCH
• 1 x TOOLING,HAND OPER;WRENCH,
• 1 x S/A;CLEANSE ADAPTOR
• 1 x SW, FLUID LVL; ASSY
• 1 x &$CONN, D TYPE,
• 1 x CI'LG, QUICK-CONN; PANEL M0
• 1 x Y.UNEQ(BARB). 08ID>.06ID
• 1 x FTG,MISC; FLANGELESS,0 V0
• 1 x Valve, PNEU; DUCKBILL, N.0.
• 1 x VALVE.PNEU.CHECK 1/8 ID T
• 1 x CPLG, QUICK-CONN;INTL,50V
• 1 x VALVE, PNEUMATIC,
• 1 x CPLG,QUICK-CONN;INSERT,E
• 1 x CPLG,QUICK-CONN; INTL, PN
• 1 x CPLG, QUICK-CONN;EXT,.125
• 1 x SIA:SAMPLE PROBE
• 1 x PLUNGER; ASSEMBLY,
• 1 x CP;SUPPORT,CONTAINER,NE
• 1 x HINGE; 10 IN-LB
• 1 x LAB EQUIP;VALVE
• 3 x VALVE, PNEU, CHECK 1/8 ID T
• 8 x FRU; MANUAL SAMPLE HEAD
• 1 x TOOLING, CUSTOM; FILTER RIN
• 1 x RFI/EMI SUPPRESSOR; FERRIT
• 1 x S/A; MPL SAMPLE PROBE
• 1 x TBG, POLYU;.076IDX.144OD,C
• 1 x CBL ASSY;MPL INTERLOCK SW
• 1 x S/A; SAMPLE LINE, MPL
• 1 x S/ASSY, BRKT;SUPPORT,LEFT
• 2 x CPLG, QUICK-CONN; EXT,ELB
• 2 x CPLG,QUICK-CONN;INTL CONN
• 1 x CPLG,QUICK-CONN;PANEL MOU
• 1 x TUBING. 145IDX.250+-005
• 1 x TBG,SILICONE;&TUBING,PUL
• 1 x CPLG,QUICK-CONN;PANEL MO
• 6 x CHECK VALVE FOR .062 I/D
• 5 x VALVE, PNEUMATIC,
• 8 x CPLG, QUICK-CONN; INSERT , E
• 1 x Y.UNEQ(BARB).08ID.0.6ID
• 1 x CPLG, QUICK-CONN; INSERT , W
• 1 x CPLG QUICK-CONN;EXT,INSE
• 2 x CPLG,QICK-CONN;INTL,.375
• 1 x Check Valve For .062 I/D
• 6 x FTG, MISC; FLANGELESS, 0 V0
• 1 x CPLG, QUICK- CONN; INTL, PN
• 1 x CPLG, QUICK-CONN;EXT,.125
• 1 x CPLG,QUICK-CONN; PANELMOU

Sanyo MCO-18AIC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

Features 3 Shelves.

Mixed Job Lot of Laboratory Equipment - Syngene, Polymer, VWR, Carl Zeiss, WPA

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-37345 Syngene InGenius LHR Gel Doc Imaging System Lab

ITEM-37347 Polymer Laboratories PL-AS RT GPC Auto Sampler Lab

ITEM-37376 VWR KuroGel Maxi 20 Electrophoresis

ITEM-37379 2x Air admiral Cole Parmer Pumps

ITEM-37380 fisherbrand 70155 pump and fisherbrand FB70150 pump

ITEM-37381 Mettler collage2440 Delta Range Weighing Scales

ITEM-37383 3x Boxes of small glass panels

ITEM-37384 Metal Frame

ITEM-37388 Box of cables and adapters

ITEM-37389 2x Hamilton 76615 Syringe cleaner

ITEM-37393 Oertling Model-A03 Balancing Scales

ITEM-37394 Glass Lab Beaker/Flask

ITEM-37395 harvard student oscillograph

ITEM-37396 Scalamp Galvanometer

ITEM-37397 Psychogalvanometer

ITEM-37398 Digital Storage Oscilloscope

ITEM-37399 WPA Edspot long scale galvanometer

ITEM-37400 Mannesmann Tally Pixy

ITEM-37401 Linstead E.H.T Supply Type S2

ITEM-37402 Unimatic SN1 Stanton

ITEM-37405 Wayne Kerr Bridge Detector

ITEM-37406 2x RS Digital MultiMeters

ITEM-37407 Walter Ozonizer

ITEM-37409 Miscellaneous Parts

ITEM-37410 Shuttle X Super ritemaster

ITEM-37412 beckman london eyepiece

ITEM-37413 Various cables

ITEM-45387 Thermo Scientific HAAKE SC 100 Digital Immersion Cooler/Heater Lab

ITEM-45440 Perkin Elmer GeneAmp 9600 PCR

ITEM-45463 Marzhauser Wetzlar 2-Achsen-Joystick CZ

ITEM-45464 Thermo Orion 3 Star pH Benchtop

ITEM-45465 A&D Instruments t6969 0.01 Balance

ITEM-45466 mettler toledo fiveeasy fe20

ITEM-45467 Carl Zeiss NAG 2, 12V 100W Stab Power Supply

ITEM-45468 VWR Lab Dancer s42

ITEM-45469 VWR Lab Dancer s42

ITEM-45472 Lot of Hendley Essex Microscope Slides

ITEM-46049 Unbranded Microscope Eye pieces

ITEM-46050 Dosimeter Charging Unit

ITEM-46129 Hanna Instruments HI 2211 pH/ORP Meter

ITEM-46249 A&D AND FR-200 Digital Precision Analytical Balance Weighing Scales Lab

ITEM-46290 Ablerex 3000 rt plus

Z Corporation ZPrinter 450 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

In good cosmetic condition. The printer failed to power on and did not pass the PAT test.

Therefore, it is listed as Spares/Repair.

Specifications;

• Build speed: between 2 to 4 layers per minute

Build volume:

• X-axis: 8 inches (203 mm)
• Y-axis: 10 inches (254 mm)
• Z-axis: 8 inches (203 mm)
• Build capacity: 640 cubic inches
• Layer thickness:
• Minimum: 0.0035 inches (0.089 mm)
• Maximum: 0.004 inches (0.102 mm)
• Color shell thickness: 0.025 inches
• Resolution: 300 x 450 dpi
• Materials:
• Powder: zp130
• Binder: zb59
• Print heads:
• HP11 (clear binder)
• HP57 (single tricolor CMY)

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it did not drop in temperature.

Therefore, it is listed as Spares/Repair.

Hitachi F-4500 Fluorescence Spectrophotometer System

This item was removed from a university laboratory where it was surplus to requirements.

The Hitachi F-4500 unit does not power on; however, it is in good condition with minimal wear. The previous owner said the PSU had failed.

Due to it not powering on it is listed as Spares/Repair

Includes:

• Vigen Genie P3 500 Computer
• Model: F-4500
• Serial No.: 1163-004
• Software: F-4500 FL_mnu - 2504060-05.

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

• Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with only minor marks from use.

The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault.

The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed.

Guavasoft 3.1 has also been installed, which includes:

ViaCount.

InCyte (This requires an unlock code from Millipore to run).

easyCheck.

Guava Clean 3.1.

We have been able to open and close the sample tray. This proves that the system is fully connected.

It is sold for spares/repairs.

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

• 1x Jouan AG 290.G Swing Bucket Rotor
• 4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
• 1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
• 4x 125 ml Tube Adaptors
• 4x Support Feet

YSI 2300 230V STAT Plus Glucose Lactate Analyser Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in reasonably good cosmetic condition, however, there is a missing side panel.

The previous owner had stated it is not in working order, though the reason is unknown.

Therefore, it is listed as Spares/Repair.

Siemens Aspen Advanced Acuson Ultrasound Machine (Spares/Repair)

This item was removed from a university laboratory where it was surplus to requirements.

The main unit powers on, but the screen began flickering before eventually failing.

The casing is loose in places and the hard drive has been removed. Therefore, it is listed as Spares/Repair.

Includes:

• Sony Graphic Printer UP-895MD – powers on
• Sony Video Cassette Recorder SVO-9500MDP – powers on

Model: Siemens Aspen Acuson

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. The casing is loose and required securing with a screw, suggesting it may have been opened previously.

The item powers on, but no further testing has been conducted. The previous owner reported it as non-functional, though the specific fault is unknown.

Therefore, it is listed as Spares/Repair.

Includes:

• Pipe fittings
• Grey connector box for the pipe system

Systec DB-45 Autoclave Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus to requirements.

The unit powers up but shows the following error.

M26 - LAMP COOLING BLOWER FAILURE.

The manual states:

1. The blower is bad.

2. The blower relay is bad.

3. The airflow switch is bad.

We have been advised that the system is missing some essential parts. These parts are available from the manufacturer.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs due to the error.

New Brunswick Innova U725-G Ultra Low Temperature Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed to drop below 2ºc when set to its minimum of -86ºc.

Therefore, it is listed as Spares/Repair.

Specifications;

• Model U725-86G
• Capacity 727 litres
• Serial No. 1016-0976-1111

Thermo Scientific HERAfreeze HFU 2185 Basic-41 -80 Ultra Low Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

The unit was described as "unreliable" prior to collection - it is sold for spares/repairs.

Specifications;

• Model HFU 2185 Basic-41
• Serial No. 020T-248264-0T
• Capacity 572 litres

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.

Therefore, this item is being sold strictly as Spares/Repair.

Includes:

Beckman Allegra X-22R unit only (no rotor or accessories included)

Nuaire 5800E C02 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

Nuaire 5810E CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.