Items 2201 to 2220 of 3548

Image of item

£ 48.23 (ex. VAT) 1 in stock

Mettler Toledo Dewar Flask With Fittings in original packing and box.

ITEM-03705

Mettler Toledo Dewar Flask in original packing in box . Fantastic condition.

Image of item

£ 338.33 (ex. VAT) 1 in stock

Mettler Toledo DL67 Lab Volumetric Titrators

ITEM-07743

This unit was removed from a working environment as surplus to requirements. We were informed it is in full working order.

Image of item

£ 183.27 (ex. VAT) 1 in stock

Mettler Toledo H34 Analytical Balance Lab Weighing Scales

ITEM-07925

This unit was removed from a lab as it was surplus to requirements.


The unit appears to work but may require calibration prior to use.

Image of item

£ 156.56 (ex. VAT) 1 in stock

Mettler Toledo H35AR 160G Laboratory Analytical Scale Balance Lab

ITEM-07926

This unit was removed from a lab as it was surplus to requirements.


The unit appears to work but may require calibration prior to use.

Image of item

£ 18.75 (ex. VAT) 1 in stock

Mettler Toledo IND320 320pH Meter User Manual Instruction Lab

ITEM-12553

This manual was removed from a lab during a clearout.

Image of item

£ 82.50 (ex. VAT) 1 in stock

Mettler Toledo Inpro 6800 Dissolved Oxygen Probe Sensor Lab PN 52200101

ITEM-14230

Mettler Toledo Inpro 6800 Dissolved Oxygen Probe Sensor.


This item was removed from a lab during a clear out.


Mettler Toledo PN 52200101.

SN 0063483.


Unit is untested.

It appears to be in good used condition.


Please see photos for further details.




Image of item

£ 1,875.00 (ex. VAT) 1 in stock

Mettler Toledo LabMax Automatic Lab Reactor + ATB VAFU 71/4B-7 Pump Lab

ITEM-07207

This Mettler Toledo LabMax Automatic Lab Reactor with ATB VAFU 71/4B-7 Pump Lab was removed from a university laboratory where it was surplus to requirements.


We were unable to power the unit on but it is in good cosmetic condition with light marks and scratches.


Included with it are a pump/stirrer, an emergency stop button, and some cables.



Image of item

£ 75.00 (ex. VAT) 1 in stock

Mettler Toledo Laboratory Digital Scales - Spares Repairs

ITEM-03605

Metler Toledo Laboratory Digital Scales. Item in very good cosmetic condition but does not power on so is sold as spares / repairs.



Image of item

£ 195.00 (ex. VAT) 1 in stock

Mettler Toledo S20 SevenEasy Temp & pH Meter + Probe Lab

ITEM-14267

Mettler Toledo S20 SevenEasy pH Meter.


Item was removed from a lab during a clear out as surplus to requirements. At our site we have powered it on but not tested it further.


Unit powers up fine with batteries(not included).


We couldn't get it to work with our power supply, but we might not have had the correct supply.


Probe is included and unit is in good condition.


Image of item

£ 96.45 (ex. VAT) 1 in stock

Metzger Vacuum Pump MWVD242.001 Laboratory Lab Equipment Faulty Spares Repair

ITEM-07950

Metzger Vacuum Pump item no MWVD242.001 - originated in a working Lab in a top UK University and came to us as part of a Lab clear out.


The pump powers on briefly when tested but then blows the internal fuse.

Image of item

£ 446.89 (ex. VAT) 1 in stock

MGE SAM 12 Medical Suction Machine Static High Vacuum Flow Lab

ITEM-10741

This unit was removed from a lab during a clearout. The lab manager believed this unit was working when last used - at our site we have tested it to power-on but not further.


Image of item

£ 473.81 (ex. VAT) 1 in stock

MGE SAM12 High Flow Vacuum Pump Medical Suction Lab 12/01070101

ITEM-13383

This unit was removed from a university lab as surplus to requirements.


We have not tested the unit with a vacuum gauge - but as far as we can reasonably tell it appears to be in working order. The unit powers on and is running smooth. Suction seems to work and adjustment dial seems to work.



Image of item

£ 150.00 (ex. VAT) 1 in stock

Mickle Laboratory Lab Large Heating Shaking Water Bath

ITEM-14055

This Mickle Laboratory Shaking Water Bath was removed from a university where it was surplus to requirements.


The unit powers on and shaker works smoothly at variable speeds.


The water bath reached a max temp of 75C.


The unit is in ok condition, but it's missing a blub out the front, and generally old and well worn.


Image of item

£ 153.75 (ex. VAT) 1 in stock

Mickle Laboratory Large Heating Shaking Water Bath Lab

ITEM-14053

This Mickle Laboratory Shaking Water Bath was removed from a university during a clearance.


The Unit powers on and shaker works smoothly.


The Unit heats up and hits 26 Celsius on low and 67 Celsius on high.


It is in good condition though it is old and has signs of wear and tear.




Image of item

£ 525.00 (ex. VAT) 1 in stock

Micro Instruments Binocular Microscope + Nikon FX35A & HFX-II Camera Unit Lab

ITEM-13680

This Micro Instruments Oxford Ltd Binocular Microscope was removed from a university as surplus to requirements.


. The unit is in great condition but we have not tested it at our site. It has HKW10X Eyepieces and a Nikon FX35A & HFX II Camera Unit attached.



Image of item

£ 450.00 (ex. VAT) 1 in stock

Microflow Bioquell Class 1 Biological Safety Cabinet M50230/SP2 Lab

ITEM-14157

This unit was removed from a lab facility during a building closure as it was no longer required.


Unit powers on and lights and fans start up but we have not tested it any further.


Unit is in fair condition. Looks like it was manufactured in 1992.


Unit is untested as all the power cables have been cut.


The front panel needs the threads replacing on both of the outer clamp down knobs.

The two inner ones are fine, but the threads are slipping on both outer ones.

The panel will not screw down flush to the unit.

Should be an easy fix.


Please note this unit must be safety inspected and commissioned by an engineer prior to use. It may also require new filters - we have not inspected if they are included or in useable condition.


There is no stand.


Unit is approximately 145cm long, 60cm deep and 66cm high.




Image of item

£ 405.00 (ex. VAT) 1 in stock

Microflow Class I 1 Microbiological Safety Cabinet Lab Biological MSC

ITEM-14970

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Image of item

£ 317.91 (ex. VAT) 1 in stock

Microflow Class I 1 MSC Biological Safety Cabinet Lab Microbiological

ITEM-14969

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Image of item

£ 394.97 (ex. VAT) 1 in stock

Microflow Class I Biological Safety Cabinet MSC Lab 1

ITEM-14966

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Image of item

£ 365.97 (ex. VAT) 1 in stock

Microflow Class I Microbiological Biological Safety Cabinet MSC Lab

ITEM-14971

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Items 2201 to 2220 of 3548