Filter products

£ to £

All Products

Items 1401 to 1420 of 2238

£ 1,312.50 (ex. VAT)

LTE Scientific Touchclave R Lab Laboratory Autoclave

ITEM-08367

This autoclave is being sold by the lab as surplus to requirements. We were assured it is in full working order, but we have not tested it ourselves. You will need to conduct all relevant safety tests on install.



£ 150.00 (ex. VAT)

LTE Scientific Toxic / Chemcal Storage Cabinet Safety Locking Decontaminated

ITEM-07358

This cabinet was removed from a university department as surplus to requirements. It was fully decontaminated prior to removal so should be no residual contamination.


Ideal for storage of chemicals. Can be wall-mounted (screws not included). Comes with a key.

£ 82.50 (ex. VAT)

Luckham 4RT Rocking Table Orbital Shaker Laboratory Lab Mini Bench Top

ITEM-06660

  • This unit was removed from a lab as surplus to requirements. Physical condition is quite poor, but unit is working.

£ 142.50 (ex. VAT)

Luckham V400 Vortexer Lab Shaker Rocker

ITEM-09733

This unit was removed from a university lab as surplus to requirements.


The lab informed us it was in full working order.

£ 937.50 (ex. VAT)

Luminex 100 SD Flow Cytometer Analyzer Lab + Software

ITEM-12267

This complete system is being sold on behalf of a university lab.


The system is complete with software.


1x Luminex SD

1x Luminex 100

1x Luminex XYP

£ 375.00 (ex. VAT)

Mach-Aire 600WS Weigh Booth / Clean Air Cabinet

ITEM-10017

This unit was removed from a lab as surplus to requirements.


The unit appears to be in good condition.


Please note, this cabinet does not come with a filter or any kind of extraction device - it is only the cabinet which is included.

£ 285.00 (ex. VAT)

Mach-Aire Lab Weigh Booth / Fume Hood / Clean air workstation

ITEM-07313

This unit was removed from a facility as surplus to requirements.


Normally, the unit would be ducted to an extractor and operate as a fume hood / weigh booth.


Please note, the unit does not include an extractor / filter unit so you would need to source something to extract the fumes if you wanted to use it as a fume hood / weigh booth.


However, even without the filter / extractor the unit would still be useful for a range of simple laboratory work.


Weighing scales are not included.

£ 60.00 (ex. VAT)

Magimax Nespresso Coffee Machine Office

ITEM-12100

This unit was removed from an office as surplus to requirements.


We have powered the unit on but not tested it further.

£ 187.50 (ex. VAT)

Major Science MS Major Cycler Thermal Cycler Lab Equipment

ITEM-06344

Major Science (MS) Major Cycler Thermal Cycler in fantastic condition.  This equipment originated in a working Lab in a top UK University but is now surplus to requirements.

£ 375.00 (ex. VAT)

Malden Electronics 754 Signal Generator Lab

ITEM-11208

This unit was removed from a University Physics lab as surplus to requirements.


The unit appears to work as expected in our initial testing but we havn't tested all functions.

£ 187.50 (ex. VAT)

Malvern HHC-5012 Laser Particle Counter Lab

ITEM-08540

This unit was removed from a lab store-room as surplus to requirements.


We have powered on the unit but not tested it further.

£ 450.00 (ex. VAT)

Manfredi Tabycast 3C Dental Lab Centifugal Casting Machine 220/240V 1000W C03C4

ITEM-05614

This Manfredi Tabycast 3C Dental Lab Centifugal Casting Machine Model no C03C4 originated in a working Lab in a top UK University but is now surplus to requirements.


The Machine is in great condition cosmetically. Our team were able to get the unit to spin, but then it stopped - we are unsure if there is a specific speed to run the unit at or if there could be a fault.

£ 52.50 (ex. VAT)

Marantz Professional PMD660 Portable Compact Flash Digital Recorder

ITEM-12210

This unit was removed from a university store room as surplus to requirements.


It was in full working order when last used.

£ 93.75 (ex. VAT)

Marquette Hellige Responder 3000 Defibrillator Lab Equipment

ITEM-11736

This unit was removed from a university facility during a building closure.


The unit comes with 4 batteries and a charger, but only one battery appears to work.


The unit is strictly sold as spares / repairs as we cannot guarantee the function of the unit, and must be serviced, inspected and certified by a competent engineer.

£ 750.00 (ex. VAT)

Masstorr DX-414 Quadrupole Mass Spectrometer Analyser Lab

ITEM-10006

This unit was removed from a chemistry lab as surplus to requirements.


The lab assured us it was in full working order prior to removal.


We have only tested it to power-on ourselves.

£ 562.50 (ex. VAT)

MAT Class 1 Microbiological Safety Cabinet W/ Stand TrimaT 1 Laboratory Lab

ITEM-05937

  • In a good working condition with some minor marks
  • Pulled straight from a working laboratory
  • From a top UK University
  • Class 1 safety cabinet
  • As part of the decontamination, the filters have been removed and disposed of. 
  • Key included to power on and off.
  • Model- CLI-IRI
  • Maximum pressure: 0-500.
  • There is also the original stand included (dismantled) 
  • Last test date: 17/01/06 by the manufactures MAT
  • Electrical supply: 200V - Consumption 280V 
  • Included is, MAT Formalin Vaporiser (Max capacity 60ml) - 230V 2AMP
  • Inside the glass, the dimensions are: 600x1100x730mm
  • The external dimensions: 700x1300x1460mm  

£ 843.75 (ex. VAT)

Matrix Hydra DT-300 Automated Liquid Handler

ITEM-08760

This unit was removed from a lab during a clearout as it was surplus to requirements.


We have powered the unit on and can't detect any faults but have not tested all functions of the unit.

£ 750.00 (ex. VAT)

MBR Bio Reactor 2 x Mini, 1 x MCS 11, 2 x MCS 1, w/ Ingold Electrode & Manual

ITEM-02808

MBR Bio Reactor AG Switzerland Equipment which originated in a working Lab in a top UK University and came to us as part of a Lab clear out - consisting of:


1 x MBR MCS 11

2 x BMR MCS 1

2 x MBR Mini

1 x Ingold Electrode 

1 x Original MBR Manual

Plus various cables & accessories - please see photo's


Unfortuantely, one of the reactor vessels is quite badly damaged so is likely unuseable - please see photograph to show crack. It is quite difficult to see in the pictures, but the glass is split from top to bottom in one area. It may still hold liquid and may not leak, but would certainly not be suitable for any pressure. It would probably leak eventually.

£ 300.00 (ex. VAT)

Mbraun GB 2202 P - PAC 2012 2,5 mbar Lab Glove Box Acrylic Enclosure Lab

ITEM-09932

This unit was removed from a lab as surplus to requirements.


We have not tested the unit.


There are no electronics included - it is just the acrylic enclosure.


In the photos, it looks like there is a crack in the front of the acrylic enclosure under one of the glove ports. This is just an effect of lighting, there is no crack - the unit is in excellent condition.


Length - 140cm

Width- 60cm

Height- 170cm

£ 150.00 (ex. VAT)

Meeco Tracer Moisture Analyzer Laboratory Lab Equipment

ITEM-06680

Meeco Tracer Moisture Analyzer came from a Lab in a leading UK University as part of a clear out. The unit powers on but is not able to hold a steady reading. We believe it is faulty but we are not able to diagnose any further.

Items 1401 to 1420 of 2238