Filter products

£ to £

All Products

Items 1421 to 1440 of 2263

£ 375.00 (ex. VAT)

Malden Electronics 754 Signal Generator Lab

ITEM-11208

This unit was removed from a University Physics lab as surplus to requirements.


The unit appears to work as expected in our initial testing but we havn't tested all functions.

£ 187.50 (ex. VAT)

Malvern HHC-5012 Laser Particle Counter Lab

ITEM-08540

This unit was removed from a lab store-room as surplus to requirements.


We have powered on the unit but not tested it further.

£ 450.00 (ex. VAT)

Manfredi Tabycast 3C Dental Lab Centifugal Casting Machine 220/240V 1000W C03C4

ITEM-05614

This Manfredi Tabycast 3C Dental Lab Centifugal Casting Machine Model no C03C4 originated in a working Lab in a top UK University but is now surplus to requirements.


The Machine is in great condition cosmetically. Our team were able to get the unit to spin, but then it stopped - we are unsure if there is a specific speed to run the unit at or if there could be a fault.

£ 300.00 (ex. VAT)

Marconi 200MHz TF2370 Spectrum Analyser Display & RF Unit

ITEM-11188

This unit was removed from a University Physics lab as surplus to requirements.


The unit appears to be in working order from what we can tell but we have not tested it fully.


One handle on the unit is broken.

£ 93.75 (ex. VAT)

Marquette Hellige Responder 3000 Defibrillator Lab Equipment

ITEM-11736

This unit was removed from a university facility during a building closure.


The unit comes with 4 batteries and a charger, but only one battery appears to work.


The unit is strictly sold as spares / repairs as we cannot guarantee the function of the unit, and must be serviced, inspected and certified by a competent engineer.

£ 750.00 (ex. VAT)

Masstorr DX-414 Quadrupole Mass Spectrometer Analyser Lab

ITEM-10006

This unit was removed from a chemistry lab as surplus to requirements.


The lab assured us it was in full working order prior to removal.


We have only tested it to power-on ourselves.

£ 562.50 (ex. VAT)

MAT Class 1 Microbiological Safety Cabinet W/ Stand TrimaT 1 Laboratory Lab

ITEM-05937

  • In a good working condition with some minor marks
  • Pulled straight from a working laboratory
  • From a top UK University
  • Class 1 safety cabinet
  • As part of the decontamination, the filters have been removed and disposed of. 
  • Key included to power on and off.
  • Model- CLI-IRI
  • Maximum pressure: 0-500.
  • There is also the original stand included (dismantled) 
  • Last test date: 17/01/06 by the manufactures MAT
  • Electrical supply: 200V - Consumption 280V 
  • Included is, MAT Formalin Vaporiser (Max capacity 60ml) - 230V 2AMP
  • Inside the glass, the dimensions are: 600x1100x730mm
  • The external dimensions: 700x1300x1460mm  

£ 843.75 (ex. VAT)

Matrix Hydra DT-300 Automated Liquid Handler

ITEM-08760

This unit was removed from a lab during a clearout as it was surplus to requirements.


We have powered the unit on and can't detect any faults but have not tested all functions of the unit.

£ 750.00 (ex. VAT)

MBR Bio Reactor 2 x Mini, 1 x MCS 11, 2 x MCS 1, w/ Ingold Electrode & Manual

ITEM-02808

MBR Bio Reactor AG Switzerland Equipment which originated in a working Lab in a top UK University and came to us as part of a Lab clear out - consisting of:


1 x MBR MCS 11

2 x BMR MCS 1

2 x MBR Mini

1 x Ingold Electrode 

1 x Original MBR Manual

Plus various cables & accessories - please see photo's


Unfortuantely, one of the reactor vessels is quite badly damaged so is likely unuseable - please see photograph to show crack. It is quite difficult to see in the pictures, but the glass is split from top to bottom in one area. It may still hold liquid and may not leak, but would certainly not be suitable for any pressure. It would probably leak eventually.

£ 300.00 (ex. VAT)

Mbraun GB 2202 P - PAC 2012 2,5 mbar Lab Glove Box Acrylic Enclosure Lab

ITEM-09932

This unit was removed from a lab as surplus to requirements.


We have not tested the unit.


There are no electronics included - it is just the acrylic enclosure.


In the photos, it looks like there is a crack in the front of the acrylic enclosure under one of the glove ports. This is just an effect of lighting, there is no crack - the unit is in excellent condition.


Length - 140cm

Width- 60cm

Height- 170cm

£ 112.50 (ex. VAT)

Medcalf Bros Model C Hy Flo Pump Lab Equipment

ITEM-10677

This unit was removed from a lab during a clearout.


We have powered the unit on but not tested it further.

£ 30.00 (ex. VAT)

Medium futur 10 Overhead Projector OHP Acetate

ITEM-08193

This unit was removed from an office as surplus to requirements.


Whilst we have not tested this unit ourselves, the office assured us it was in full working order and we are assuming this is accurate.


However, there is no bulb included.


If you order the item and find any fault we will guarantee to refund your item plus postage costs.

£ 150.00 (ex. VAT)

Meeco Tracer Moisture Analyzer Laboratory Lab Equipment

ITEM-06680

Meeco Tracer Moisture Analyzer came from a Lab in a leading UK University as part of a clear out. The unit powers on but is not able to hold a steady reading. We believe it is faulty but we are not able to diagnose any further.

£ 225.00 (ex. VAT)

Mega Electronics Bubble Etch Tank PA104

ITEM-07848

Mega Electronics - Bubble Etch Tank PA104

This item was removed from a working lab as surplus to requirements. 


£ 37.50 (ex. VAT)

Meiji Techno Single Arm Desk Bench Lamp Lab

ITEM-11822

This unit was removed from a lab as surplus to requirements.


It appears to be in good working order.

£ 487.50 (ex. VAT)

MEIKO dv80.2 Pass Through Commercial Dishwasher - Spares / Repair

ITEM-11990

MEIKO dv80.2 Pass Through Commercial Dishwasher - Spares / Repair

This unit originated in university canteen/cafeteria and it comes with the metal sink.

We were told by our contact from the university that this item is faulty and not working.

We do not have information on what the failure is.

The unit is sold as Spares / Repairs.


£ 150.00 (ex. VAT)

Melting Point SMP1 Apparatus Lab, Laboratory Equipment

ITEM-02540

This unit was removed from a working environment however we have only tested it for power-on.

£ 37.50 (ex. VAT)

Meopta Axomat 5 Standard Enlarger Photography Dark Room Photograph

ITEM-06273

Meopta Axomat 5 Standard Enlarger originated in a working Lab in a top UK University but is now surplus to requirements.

£ 750.00 (ex. VAT)

Messer Griesheim Apollo 50 Liquid Nitrogen Dewar Storage Vessel

ITEM-10736

This unit was removed from a lab as surplus to requirements.


The lab manager believed this was working when last used, but we have not tested it with nitrogen at our site.


If there is a problem with the unit we will of course offer a full refund in exchange for return of the item (and we will cover return postage costs within the UK). However we cannot offer a refund or compensation against any lost nitrogen, or samples etc.

£ 750.00 (ex. VAT)

Met Prep 201 Grinder Polisher Lab

ITEM-08586

This unit was removed from a lab as surplus to requirements and we were assured the unit was in working order prior to removal from the lab


However, we have only tested it to power-on ourselves.


Therefore we are happy to sell the unit on the basis that it is in working order, and if you encounter any problems we can offer a 90-day return to base warranty.


Within the UK, we will also arrange the return postage so you are not out of pocket if a problem does arise with the unit.

Items 1421 to 1440 of 2263