This rotor was removed from a lab store during a clearout.

We have not tested the rotor, and do not know what centrifuges it may be compatible with as there are no details on the unit.

This unit was removed from a lab during a clearout.

Unfortunately there is no manufacturers make / model number visible on the unit - presumably there was an information plate or sticker somewhere that has come off.

Unit powers on but was covered in stickers saying it was faulty and had broken casing. The light housing looks to be faulty, and some of the knobs dont' seem to work, namely the tension one. Dimmer worked.

4 objectives included unbranded

1 x PL4/0,1 160/-

1 x PL L 25/0.40 160/1.2

1 x PL L 40/0.6 160/1.2

1 x PL L 10/0.25 PHP 160/1.2

This unit was removed from a lab during a clearout.

We have powered the unit on but not tested it further. Presumably some refurbishment will be needed.

This board was removed from a lab as surplus to requirements.

We have not tested the unit.

This unit was removed from a lab during a clearout.

We have powered it on but not tested it further.

This Lab-Line Instruments Multi-Blok Heater Model no 2093 was removed from a working Lab in a top UK University.  It has 2 x 20 well blocks and 1 x 12 well block.  It has a High and Low heat setting with individual variable heat controls.  The heater easily reached 60°C when tested.  

The unit is fitted with an American style plug (115V) and a transformer or adapter is NOT included.

This unit was removed from a lab during a building closure.

Unit is in working order currently cooling down to 1.8C.

Unit is clearly used but in reasonable condition.

Because unit was used in a lab it should not be used for food storage.

Please note, if this unit fails during 45 days we will offer you a free of charge replacement or a refund.

However, we cannot reimburse any consequential loss as a result of failure such as sample loss. Sample loss should be covered by your own insurance and we do not consider this unit suitable for storing high value samples because it is used.

This unit was removed from a lab during a building closure.

Unit is in working order currently cooling down to -21 though it tends to sit closer to -17.

Unit is in excellent condition.

Please note, if this unit fails during 45 days we will offer you a free of charge replacement or a refund.

However, we cannot reimburse any consequential loss as a result of failure such as sample loss. Sample loss should be covered by your own insurance and we do not consider this unit suitable for storing high value samples because it is used.

Lock works and key is included.

This unit was removed from a lab during a building closure.

Unit is in working order currently cooling down to 3C.

Unit had a sticker on the front that was sprayed over. We removed the sticker and now it looks like it has a white sticker covering up mess. We tried to clean it up but no success.

Because unit was used in a lab it should not be used for food storage.

Please note, if this unit fails during 45 days we will offer you a free of charge replacement or a refund.

However, we cannot reimburse any consequential loss as a result of failure such as sample loss. Sample loss should be covered by your own insurance and we do not consider this unit suitable for storing high value samples because it is used.

This unit was removed from a lab during a building closure.

Unit is in working order currently cooling down to -4.7C when set to highest setting.

Unit has some spray paint on the front.

Because unit was used in a lab it should not be used for food storage.

Please note, if this unit fails during 45 days we will offer you a free of charge replacement or a refund.

However, we cannot reimburse any consequential loss as a result of failure such as sample loss. Sample loss should be covered by your own insurance and we do not consider this unit suitable for storing high value samples because it is used.

This unit was removed from a lab during a building closure.

Unit is in working order currently cooling down to 2C.

Unit appears to be in excellent condition.

Because unit was used in a lab it should not be used for food storage.

Please note, if this unit fails during 45 days we will offer you a free of charge replacement or a refund.

However, we cannot reimburse any consequential loss as a result of failure such as sample loss. Sample loss should be covered by your own insurance and we do not consider this unit suitable for storing high value samples because it is used.

This unit was removed from a lab during a building closure.

Unit is in working order currently cooling down to -26

Unit has some black spray paint on the front - but is otherwise in fairly good condition.

Please note, if this unit fails during 45 days we will offer you a free of charge replacement or a refund.

However, we cannot reimburse any consequential loss as a result of failure such as sample loss. Sample loss should be covered by your own insurance and we do not consider this unit suitable for storing high value samples because it is used.

This unit was removed from a lab during a building closure.

Unit is in working order currently cooling down to -28

Unit has spray paint on the front as well as some sticky residue on the top of the unit that won't come off - so unit is generally in poor condition.

Because unit was used in a lab it should not be used for food storage.

Please note, if this unit fails during 45 days we will offer you a free of charge replacement or a refund.

However, we cannot reimburse any consequential loss as a result of failure such as sample loss. Sample loss should be covered by your own insurance and we do not consider this unit suitable for storing high value samples because it is used.

Manual is included.

This unit was removed from a hospital blood bank as part of an equipment upgrade programme.

The unit doesn't have any obvious way of changing the temperature and LCD panel doesn't appear to work - this is probably why they were replacing the equipment.

The unit began cooling as soon as powered on and settled at -8.8C.

There is a chart recorder but that doesn't appear to move and we don't have a key to open it.

Unit is perfectly good if you want a unit that cools to approximately -8.8C but nothing else. For any other purposes the unit requires some repairs / refurbishment.

This unit was removed from a lab during a clearout.

The unit appears to work as it should. The accessories may not be related to the unit - but were included with the item during the clearout.

The unit is missing all its feet.

Labconco Benchtop Gel dryer, includes power cord and silicone cover. 

This system was removed from a university hospital research site as surplus to requirements.

The unit is a bespoke system manufactured by Labman Automation for one of our university clients - but they no longer require the system.

We are grateful that Labman Automation have provided us user manuals and documentation for this instrument. They are also able to supply software and drivers, and even install and setup the instrument (all for reasonable extra cost of course). We consider their support essential to recomissioning of this instrument, and they are very supportive.

From the user manual:

"The robot has been designed, built and tested for the specific purpose of de-capping, weighing, and identifying chilled 3.8ml cryotubes, taking aliquots of sample using pipettes and dispensing to chilled micronic tubes. The machine is designed for no other purpose."

The system is required to reformat blood, plasma and urine samples from an input tube to one or many micronic output tubes. The robot is a Tecan RSP9000 series auto-sampler with one XL3000 syringe module.

The sample tracking software manages the storage of the samples in the cryogenic freezers. The robot has two independent arms. The left hand robot arm takes the aliquots from input tubes located in a two position tube buffer in the centre of the robot bed and dispenses into the output tubes.

The right hand arm takes input tubes from the input rack, removes the cap, puts them into the tube buffer and takes any processed input tubes from the buffer back to the rack. "

The unit for sale on this listing is the one on the left in the photo showing two units.

The system was in full working order prior to removal from the lab, but we have not tested it at our site.

This system was removed from a university hospital research site as surplus to requirements.

The unit is a bespoke system manufactured by Labman Automation for one of our university clients - but they no longer require the system.

We are grateful that Labman Automation have provided us user manuals and documentation for this instrument. They are also able to supply software and drivers, and even install and setup the instrument (all for reasonable extra cost of course). We consider their support essential to recomissioning of this instrument, and they are very supportive.

From the user manual:

"The robot has been designed, built and tested for the specific purpose of de-capping, weighing, and identifying chilled 3.8ml cryotubes, taking aliquots of sample using pipettes and dispensing to chilled micronic tubes. The machine is designed for no other purpose."

The system is required to reformat blood, plasma and urine samples from an input tube to one or many micronic output tubes. The robot is a Tecan RSP9000 series auto-sampler with one XL3000 syringe module.

The sample tracking software manages the storage of the samples in the cryogenic freezers. The robot has two independent arms. The left hand robot arm takes the aliquots from input tubes located in a two position tube buffer in the centre of the robot bed and dispenses into the output tubes.

The right hand arm takes input tubes from the input rack, removes the cap, puts them into the tube buffer and takes any processed input tubes from the buffer back to the rack. "

The unit for sale on this listing is the one on the right in the photo showing two units.

The system was in full working order prior to removal from the lab, but we have not tested it at our site.

This unit was removed from a lab during a clearout. We tested the unit and it does power up but it doesn't run - it reports an 'sp error'.

This unit was removed from a lab as surplus to requirements.

We have tested the unit to max speed and it appears to be in full working order.