Items 1541 to 1560 of 3045

Image of item

£ 370.00 (ex. VAT) 1 in stock

CSi 6000 Solid State Flowmeter Type 006000 Lab

ITEM-32075

This CSi 6000 Solid State Flowmeter Type 006000 was removed from a university lab where it was surplus to requirements.


The unit powers up and is in working order. It requires a 9V battery (Not included).


It is in good cosmetic condition with minor marks from use.


There is a manual included.



Image of item

£ 370.00 (ex. VAT) 1 in stock

Edwards PRM10 Gauge Head D021-66-000

ITEM-21096

This Edwards PRM10 Gauge Head D021-66-000 was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition with some marks from use.


It has not been tested.

Image of item

£ 370.00 (ex. VAT) 1 in stock

LMS Cooled Laboratory Incubator Model: 305 Lab

ITEM-22066

This LMS Cooled Laboratory Incubator Model: 305 was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition but the door has rust marks and scratches. The exterior also has scratches and dents. The red light is loose and not secured and there is some mould along the seal.


We had a note from the lab saying there was an issue when setting the temperature. Setting it to refrigerate was a little temperamental but it does work.



Internal dimensions:

36cm D x 46cm W x 54cm H


It was tested with a digital thermometer (not included)

When set to -10˚C, the display showed -6.1˚C and the thermometer measured -8.7˚C

When set to 37˚C, the display showed 37˚C and the thermometer measured 34.7˚C

When set to 50˚C, the display showed 50.2˚C and the thermometer measured 47.6˚C

When set to 4˚C, the display showed 7.3˚C and the thermometer measured 4˚C


Image of item

£ 370.00 (ex. VAT) 1 in stock

Nikon DN100 Digital Net Microscope Camera Controller Lab

ITEM-22080

This Nikon DN100 Digital Net Microscope Camera Controller was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further. It is in good cosmetic condition with some marks from use.


Included with it are;

1x Integral compact flash card

1x Camera control unit remote

1x Camera serial cable

1x Logitec computer mouse



Image of item

£ 370.00 (ex. VAT) 1 in stock

Techne TC-512 Thermal Cycler FCT51H2D 96 x 1.5 ml Lab

ITEM-32092

This Techne TC-512 Thermal Cycler FCT51H2D was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


Unit Cycles: 131952.

Block Cycles: 128016.

Software Version: 23.01.

Hardware Version. 2.00.


It is in good cosmetic condition with minor marks from use.



Image of item

£ 370.00 (ex. VAT) 1 in stock

Buchi Drying Glass Oven Type - B-585 Lab

ITEM-24328

This Buchi Drying Glass Oven  Type - B-585 was removed from a university lab where it was surplus to requirements.


The unit powers up and was tested with a digital thermometer (not included).


When set to 40˚C he thermometer measured 32˚C.

When set to 100˚C  the thermometer measured 80˚C.

When set to 200˚C the thermometer measured 173˚C.


It was not tested higher for safety reasons.


The item is in a reasonable, used cosmetic condition but the glass needs a good clean inside.


Image of item

£ 370.00 (ex. VAT) 1 in stock

Julabo HC /4 Refrigerated/Heating Circulator Water Bath Ultra Temp 2000 F30 Lab

ITEM-25585

This Julabo HC /4 Refrigerated/Heating Circulator Water Bath was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer. (Not included).


It dropped to -11˚C after 6 hours with 50/50 antifreeze.

It was then set to 37˚C and reached 38˚C.

It was then set to 99.9˚C and achieve boiling point.


It is in reasonably good cosmetic condition with some marks from use.


Image of item

£ 370.00 (ex. VAT) 1 in stock

Casela London Folding Mirror Stereoscope & Accessories

ITEM-38468

Casela London Folding Mirror Stereoscope & Accessories


This was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but is missing both eyepieces.


There is a piece of equipment with it labelled Casela 916. We are unsure of its function or relation to the stereoscope.


It is supplied with the manual.

Image of item

£ 365.00 (ex. VAT) 1 in stock

Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-WHT

ITEM-31956

Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-WHT


This was removed from a university lab where it was surplus to requirements.


The item powers on with UV light working.


The item is in a reasonable, used cosmetic condition.

Image of item

£ 365.00 (ex. VAT) 1 in stock

Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901

ITEM-36887

Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901


The unit is in good cosmetic condition but has not been tested.

Image of item

£ 365.00 (ex. VAT) 1 in stock

Captair Ductless Filtration System Type 5000 C Lab

ITEM-27501

This Captair Ductless Filtration System Type 5000 C was removed from a university lab where it was surplus to requirements.


The unit powers up and is in working order. It is in reasonable cosmetic condition with marks form use.


Carbon Filter inside - Type C-100

Size - 755 x 405 x 100mm


Unit size - L81 W45 H33cm


Image of item

£ 365.00 (ex. VAT) 1 in stock

Shimadzu LC10-AS Liquid Chromatograph System Lab

ITEM-31356

This Shimadzu LC10-AS Liquid Chromatograph System was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition with minor marks from use. It has not been tested further.


It is supplied with a Shimadzu Syringe Unit .XL. We were unable to power this as it requires a 20-pin connecter.



Image of item

£ 365.00 (ex. VAT) 1 in stock

Mettler Toledo M1 Class 20KG Calibration Weight 11117725 Lab

ITEM-31754

Mettler Toledo 20KGF2 Class Calibration Weight


This was removed from a laboratory where it was surplus to requirements.


The unit is in good cosmetic condition but the case has marks and cracks from use. The top of the case is broken.

Image of item

£ 365.00 (ex. VAT) 1 in stock

Lot of Cole Parmer Pump Drives, Heads & Liquid Level Interface - 7544-06 Lab

ITEM-27760

Lot of Cole Parmer Pump Drives, Heads &  Liquid Level Interface. These were removed from a university lab where they were surplus to requirements.


Included are;


1 x  Pump Drive: Model No. 7544-06 Speed 6rpm

The unit powers on and is in good cosmetic condition. The motor moves smoothly.

We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.


1 x Pump Drive: Model No. 7544-20 Speed 20rpm

The unit powers on and is in good cosmetic condition. The motor moves smoothly.  We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.


1 x Liquid Level Interface  Model LI-08/B01 The unit is in good cosmetic condition.


2x Pump Heads:

Model No. 7014-20

Part No. 3.358.609


2x Masterflex Norprene tubing

Model No. 6404-14






Image of item

£ 365.00 (ex. VAT) 1 in stock

Zeiss Plan Neofluar 40x Multi Immersion Objective Plan-NEOFLUAR 40/0.9 Imm Ph3

ITEM-36888

Zeiss Plan Neofluar 40x Multi Immersion Objective Plan-NEOFLUAR 40/0.9 Imm Ph3


This was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has not been tested.



Image of item

£ 365.00 (ex. VAT) 1 in stock

LMS Cooled Benchtop Laboratory Incubator Lab

ITEM-30499

This LMS Cooled Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included)


The dial was set to the minimum of 0 and it dropped as low as -6˚c after running for a few hours.

When the dial was set to maximum, the thermometer read 42.7°c after running for around 6 hours.


The item is in a reasonable, used cosmetic condition with some minor marks from use.


Internal dimensions - D33 W45 H53cm


Image of item

£ 360.00 (ex. VAT) 1 in stock

SYNGENE GeneFlash Gel Imaging System with PULNiX TM-300 Camera Lab

ITEM-31290

This SYNGENE GeneFlash Gel Imaging System with PULNiX TM-300 Camera was removed from a university lab where it was surplus to requirements.


The system powers up and is in full working order, though one of the bulbs in the transilluminator needs replacing.


It is in good cosmetic condition with minor marks from use.


Camera PULNiX - TM-300

Transilluminator - GVM200


Internal dimensions - 35 x 37 x 40 cm

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 360.00 (ex. VAT) 1 in stock

Heraeus Laboratory Incubator Typ B 5060 EK-C02 with Trolley Lab

ITEM-19411

This Heraeus Laboratory Incubator Typ B 5060 EK-C02 was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced. The report is available on request. The system is in full working order.


it is in reasonably good cosmetic condition but has plenty of surface scratches and scuffs. it comes with a trolley.


Unit dimensions - L76 x W90 x H79cm

Internal dimensions - D57 x W60 x H60cm

6 Shelves 51 x 27.5cm


Image of item

£ 360.00 (ex. VAT) 1 in stock

Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-GRN

ITEM-31955

This Lab Bubble PCR Bubble Sample Protection Workstation BUB-PCR-SA-GRN was removed from a university lab where it was surplus to requirements.


The item powers on with UV light working.


The item is in a reasonable, used cosmetic condition.


Image of item

£ 360.00 (ex. VAT) 1 in stock

21 x CED 1902 MKIII Isolated Pre-Amplifiers Lab

ITEM-20158

21 x CED 1902 MKIII Isolated Pre-Amplifiers


These were removed from a university lab where they were surplus to requirements.


None of the units have been tested but are all in reasonably good cosmetic condition with some marks from use.




Items 1541 to 1560 of 3045

Filters

Price (£)

to

Condition