Items 1681 to 1700 of 3052

Image of item

£ 310.00 (ex. VAT) 1 in stock

Haskris Recirculating Chiller Model: R050 Lab

ITEM-22031

This Haskris Recirculating Chiller Model: R050 was removed from a university lab where it was surplus to requirements.


The unit powers up and the warning light indicates the tank is full. It has not been tested further.


The item is in reasonable cosmetic condition but there are some stains/scratches on the outer panels as well as rust and other water damage.


Image of item

£ 310.00 (ex. VAT) 1 in stock

Vacuum Generators Ltd HPLT050 5-axis UHV micro-manipulator

ITEM-19512

Vacuum Generators Ltd HPLT050 5-axis UHV micro-manipulator


This was removed from a university lab where it was surplus to requirements.


It has a UHV Magnetic Sample insertion system with a pre-chamber holding sample carousel. It is designed for use with the 5-axis manipulator.


It is in good cosmetic condition but has not been tested.


Image of item

£ 310.00 (ex. VAT) 1 in stock

UVP PCR Workstation P/N 95-0367-02 Lab

ITEM-32103

This UVP PCR Workstation P/N 95-0367-02 was removed from a university lab where it was surplus to requirements.


The unit powers up and both the white and UV lights are in good working order.


It is in reasonably good cosmetic condition but the the perspex is showing some cosmetic cracking/crazing.


Inside dimensions - 55 x 71 x 68 cm

Image of item

£ 310.00 (ex. VAT) 1 in stock

Beckman Coulter CEQ 8000 Genetic Analysis System CN/ 608450 Lab

ITEM-16943

This Beckman Coulter CEQ 8000 Genetic Analysis System was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further.


It is in good cosmetic condition with some light marks from use. It comes supplied with a model sticker/faceplate.





Image of item

£ 310.00 (ex. VAT) 2 in stock

Extreme Networks Black Diamond 8800 MSM-48c Model - 41213 Network Switch Module

ITEM-19286

This Extreme Networks Black Diamond 8800 MSM-48c  Model - 41213 Network Switch Module was removed from a university AV lab where it was surplus to requirements.


The unit comes with the original packaging but has been opened so we are unsure if it has been used or not. It is in good cosmetic condition.


We were unable to test it.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ 310.00 (ex. VAT) 1 in stock

Illumina High-Speed Microplate Shaker C/N:11197849 Lab

ITEM-25808

This Illumina High-Speed Microplate Shaker C/N:11197849 was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition but has some marks from use and some rust on the screws.


It powers up and has been tested at multiple speeds up to 2355RPM. It works well.




Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 310.00 (ex. VAT) 1 in stock

Job Lot of Laboratory Power Supplies PSU Lab

ITEM-38291

Job Lot of Laboratory Power Supplies PSU Lab


This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.


None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.


None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.


They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.


The units have not been tested at all.


Included are;


ITEM-03131 Artesyn Sunfire V890 Model - 7000817-0000 1629W Power Supply [condition: Used]

ITEM-09558 Block KTV250/X Constant Voltage Holder Lab [condition: Used]

ITEM-11202 City Technology PZ110-005-00 Gain / Voltage Controller Lab [condition: Used]

ITEM-12498 RS Components 428-433 Power Supply Lab Equipment DIN rail [condition: Used]

ITEM-14306 VG Scientific Model M8 Chopper Amplifier CA2 AV Lab [condition: Used]

ITEM-14548 RS Components 591-124 Encapsulated Power Supply [condition: New]

ITEM-16844 CIT UPS-850B Power Supply Faulty [condition: Used]

ITEM-17957 Weir 761-2 Variable Benchtop Power Supply Unit Lab [condition: Used]

ITEM-17962 Topward Electric Instruments TPS-2000d Series Digital DC Power Supply Lab [condition: Used]

ITEM-18281 Farnell Stabilised Power Supply Model L30A Lab [condition: Used]

ITEM-18290 Brookdeal Electronics Low Noise Power Amplifier Type Lab [condition: Used]

ITEM-18291 Brandenburg Photomultiplier Power Supply Model 472R Lab [condition: Used]

ITEM-18297 Farnell Instruments TOPS 2 Stabilised Power Supply Lab [condition: Used]

ITEM-18374 RS Components Thandar TG501 5MHz Function Generator Lab [condition: Used]

ITEM-18379 J801 Gauge Power Supply 4 Channel [condition: Used]

ITEM-18382 100 Amp Power Supply Half-Wave Full-Wave Common Lab [condition: Used]

ITEM-18432 Pair of Olympus Tokyo TE-II Transformers P.240 V50-60Hz 5.6V5A

ITEM-18561 0-50 Vac Max Rechargable Power Supply [condition: Used]

ITEM-18574 3 x High Power Modulator Model HPM 1 [condition: Used]

ITEM-18600 Custom Made Power Supply [condition: Used]

ITEM-18602 Custom Power Supply with Crompton Gauge [condition: Used]

ITEM-18604 Custom Power Supply Unit 24Vdc - 2.5 Amps [condition: Used]

ITEM-20594 Vacuum Generators Limited Titanium Sublimation Pump Power Supply Model: SPS4 [condition: Used]

ITEM-20762 2x Farnell Instruments LTD. Stabilised Power Supply [condition: Used]

ITEM-20771 Irwin Power Supply EA3330 [condition: Used]

ITEM-24478 APC Smart-UPS SC 450 Rackmount Uninterruptible Power Supply (UPS) [condition: Used]

ITEM-25287 Unbranded Grey Rackmount UPS Part - 980-01236-00 [condition: Used]

ITEM-18389 Acoustical Mfg Co Quad 303 Power Amplifier Lab [condition: Used]

ITEM-25067 Farnell Power Supply Model D100 [condition: Used]

Image of item

£ 310.00 (ex. VAT) 1 in stock

Hermle Z 400 Benchtop Centrifuge with Rotor Lab

ITEM-37869

This Hermle Z 400 Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.


The unit powers up and runs up to 12500rpm.


It is in reasonable cosmetic condition with marks from use.



Image of item

£ 310.00 (ex. VAT) 1 in stock

Stuart Laboratory Flask Shaker Model - SF1 Lab

ITEM-34780

This Stuart Laboratory Flask Shaker Model - SF1 was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in good cosmetic condition but has some marks from use.

Image of item

£ 310.00 (ex. VAT) 1 in stock

Sanyo Laboratory Incubator MCO-17AI CO2 Lab

ITEM-30546

This Sanyo Laboratory  Incubator MCO-17AI CO2 was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in good working order. It has had a brand new sample pump fitted. The report is available on request. It will require calibration upon installation.


It is in good cosmetic condition with minor marks from use.


4 x Shelves 45 x 45cm

Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 310.00 (ex. VAT) 1 in stock

Lot of Laboratory Vacuum Pumps, Gauges & Accessories Lab

ITEM-38285

Lot of Laboratory Vacuum Pumps


This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.


None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.


None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.


They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.


Included are;



ITEM-05190 Nanotech Pump without Motor Lab [condition: Used]

ITEM-17680 Pump House PH-2LE 2 Litre Tank Pump [condition: Used]

ITEM-18532 Vintage Medcalf Bros Junior Hy Flo Air Pump [condition: Used]

ITEM-18931 ICME High Performance Pump Motor Model M71B4 Lab [condition: Used]

ITEM-20156 CIF SIL-AIR 15 EXPORT AC Silent Air Compressor Lab [condition: Used]

ITEM-24875 Sam Medical Suction Sam 12 [condition: Used]

ITEM-25059 Welch Aspirator w/ Plastic drum Model 2511C-75 [condition: Used]

ITEM-25142 Grundfos JP5-AA-CVBP Pump [condition: Used]

ITEM-26195 SAM Medical Suction Model - SAM 12 [condition: Used]

ITEM-27765 Fisherbrand Pump Model No. FB 70155/UK [condition: Used]

ITEM-28080 Welch Dry Vacuum Pump Model No. 2545C-02 [condition: Used]

ITEM-31652 Millipore Vacuum Pump Model No. XX5522050 Lab [condition: Used]

ITEM-35000 Gast Twin Cylinder Vacuum Pump Model 72R555-V10-C222TX [condition: Used]

ITEM-02673 Edwards 7 Vacuum Pump Rotary Vane E2M0.7 Lab [condition: Used]

ITEM-11803 Leybold Heraeus Ionivac IM30 Vacuum Ion Gauge Controller Lab [condition: Used]

ITEM-17963 Edwards Pirani 502 Vacuum Gauge Controller Unit Lab

ITEM-18739 Edwards Penning CP25-K Cold Cathode High Vacuum Gauge Part no. D145-37-000 Lab [condition: Used]

ITEM-18741 Edwards Penning CP25-S Cold Cathode High Vacuum Gauge Part no. D145-33-000 Lab [condition: Used]

ITEM-18744 Edwards Penning CP25-EK Cold Cathode High Vacuum Gauge Part no. D145-41-000 Lab [condition: Used]

ITEM-18758 BOC Edwards Speedivalve SP25K N 9Bar Fluoroelastomer Diaphragm Valve Lab [condition: New]

ITEM-27969 Edwards Active Pirani Gauge APG-L-NW16 [condition: Used]

ITEM-31481 Edwards Oil Mist Filter EMF10 [condition: Used]

ITEM-19558 Hoefer Scientific Instruments PV300 Diaphragm Vacuum Pump Lab [condition: Used]

ITEM-24835 Charles Austen Pumps DYMAX 30 Diaphragm Pump Lab [condition: Used]

ITEM-25201 KNF N035.3AN.18 Diaphragm Pump Lab -

ITEM-30399 Charles Austen Dymax 30 Diaphragm Pump Lab [condition: Used]

ITEM-20531 Edwards E04 Diffusion Vapour Vacuum Pump Lab

ITEM-20563 2 x Watson-Marlow Peristaltic Pumps - MHRE 100H Lab [condition: Used]

ITEM-26453 Watson Marlow Peristaltic Pump Type: MAR-8 Lab [condition: Used]

ITEM-20740 2 x LabSmith SPS01 Programmable Syringe Pumps with Accessories Lab [condition: Used]

ITEM-24758 MG Electrical Ltd SAM 12 Medical Suction Vacuum Pump w/ Jar [condition: Used]

ITEM-26074 Leybold Vacuum Turbovac TMP 361 Turbomolecular Pump Lab

Image of item

£ 305.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge with Rotor Lab

ITEM-25267

This Thermo Electron Corporation  Labofuge 300 Heraeus Centrifuge was removed from a university lab where it was surplus to requirements.


The item powers on and is in working order with the speed running up to 4000rpm.


The item is in a reasonable, used cosmetic condition.


It is fitted with a Fanem Rotor with 8 x 15ml Yellow buckets


Image of item

£ 305.00 (ex. VAT) 1 in stock

Hitech Instruments 310 Gas Monitor, SB100 Audio/Visual Alarm & 806-117 Sensor

ITEM-23385

Hitech Instruments 310 Gas Monitor, SB100 Audio/Visual Alarm & 806-117 Sensor


These units were removed from a university lab where they were surplus to requirements.


All the units power up but have not been tested further.


Included are;


1 x Hitech Instruments 310 Gas Monitor


1 x SB100 Audio/Visual Alarm


1 x Remote Gas Sensor

806-1177


The job no. for all of the units is - S01-0048

Image of item

£ 305.00 (ex. VAT) 1 in stock

MAT BioMat 2 Class 2 II Microbiological Safety Cabinet Lab (No UV)

ITEM-31196

BioMat 2 Class 2 Microbiological Safety Cabinet


This was removed from a university lab where it was surplus to requirements.


The item powers on with airflow and white light working. No UV light.


It is in reasonably good cosmetic condition with some minor marks from use.


Cabinet dimensions - L150 W87 H179cm

Frame dimensions - L150 W82 H86cm

Internal workspace dimensions - D75 W135 H71cm

Image of item

£ 305.00 (ex. VAT) 1 in stock

2 x Stoe XRD Diffraction X-Ray Units, Parts & Accessories Lab

ITEM-17158

2 x Stoe XRD Diffraction X-Ray Units & Accessories


These were removed from a university lab where they were surplus to requirements.


They came out of an XRD Stoe cabinet that was no longer used but kept as backups for their working unit. The items were reported to be working prior to removal but we have not carried out any testing.


They are in good condition with minor signs of usage and age.

Image of item

£ POA 1 in stock

Techne Hybridiser HB-1D Oven Model FHB 1DE with Tubes & Accessories

ITEM-38661

This item is new in stock. Please enquire for further details.

Image of item

£ POA 1 in stock

Mettler Toledo SevenCompact Conductivity Meter System Model s230 Lab

ITEM-35476

This item is new in stock. Please enquire for further details.

Image of item

NEW ITEM

NEW ITEM

£ POA 1 in stock

12 x Boxes of EASIMASK Face Shields - 2400 Units

ITEM-38812

12 x Boxes of EASIMASK Face Shields - 2400 Units


These were removed from a dental lab. They were surplus to requirements.


All the units are new and sealed. A box was opened for photos.



Expiry date was 2022-05-06


Manufacturing date was 2020-05-07


Reference Number - FSM27


200 Units Per Box with 12 Boxes = 2400 Units

Image of item

£ 300.00 (ex. VAT) 1 in stock

IKA Roller 10 Digital Lab Spares/Repairs

ITEM-36754

This IKA Roller 10 Digital was removed from a university lab where it was surplus to requirements.


The unit powers up with a 24V DC supply (not included).


Error 4 is displayed a few seconds after starting a run - 'Motor blockage or overload'. We followed the troubleshooting part of on online manual, but were unable to clear the error.


It is in otherwise good cosmetic condition with marks from use.


It is sold for spares/repairs.

Image of item

£ 300.00 (ex. VAT) 1 in stock

HP Designjet 800ps C7780C with a Full Set of Ink Cartridges

ITEM-38891

HP Designjet 800ps C7780C


This was removed from a university lab where it was surplus to requirements.


The unit powers up and the lab confirmed it was in good working order, but requires windows 7 to operate it.


It is in good cosmetic condition with minor marks.


Ink cartridges included:-

3 x Magenta (11)

5 x Cyan (11)

3 x Yellow (11)

3 x Black (11)

3 x Black (10)

3 x Magenta (82)

3 x Cyan (82)

3 x Yellow (82)


Items 1681 to 1700 of 3052

Filters

Price (£)

to

Condition