All Products
Items 1701 to 1720 of 3070
£ 315.00 (ex. VAT) 1 in stock
LABCONCO 7455100 Centrifugal Evaporator Rotor with 148 x 2ml Wells Lab
ITEM-20036
LABCONCO Centrifugal Evaporator Rotor with 148 x 2ml Wells
This was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition with some light marks from use but has not been tested.
£ 315.00 (ex. VAT) 1 in stock
Labtech G-Storm Thermal Cycler Model - GS0002M Lab
ITEM-20376
This Labtech G-Storm Thermal Cycler Model - GS0002M was removed from a university lab where it was surplus to requirements.
The unit has 2 X 96 well blocks for 0.2ml tubes.
It powers on and has been tested with a digital thermometer (not included).
Left block:-
When set to 37˚c the thermometer read 36.4˚c.
We then set it to the max temp of 99˚c and the thermometer read 97.1˚c
Finally set to the minimum temp of 4˚c and it cooled down fast, the thermometer read 5˚c.
Right block:-
When set to 37˚c the thermometer read 36.7˚c
We then set it to the max temp of 99˚c and the thermometer read 97.9˚c
Finally set to the minimum temp of 4˚c and it cooled down fast, the thermometer read 4.7˚c.
It all appears to be working well.
It is in reasonably good cosmetic condition with marks from use.
£ 315.00 (ex. VAT) 1 in stock
Taylor-Wharton 10XT Cryogenic Liquid Nitrogen Storage Dewar/Tank Lab
ITEM-17356
This Taylor-Wharton 10XT Cryogenic Liquid Nitrogen Storage Dewar was removed from a university lab where it was surplus to requirements.
It is in reasonably good cosmetic condition with some marks from use.
It has not been tested and has no racking with it.
£ 310.00 (ex. VAT) 1 in stock
MakerBot Replicator 2X Experimental 3D Printer
ITEM-31309
This MakerBot Replicator 2X Experimental 3D Printer was removed from a university lab where it was surplus to requirements.
We were unable to power it up, as it was supplied without the PSU, but we were informed by the lab that it was in working order prior to removal.
Internal dimensions - L49 x W29 x H28cm
Platform - 25 X 16.5cm
It is in reasonably good cosmetic condition with minor marks from use.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 310.00 (ex. VAT) 1 in stock
Job Lot of Mixed Laboratory Equipment - Tecan - Olympus - Amersham Lab
ITEM-38303
Job Lot of Mixed Laboratory Equipment - Tecan - Olympus - Amersham Lab
This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.
None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.
The units have not been tested at all.
Included are;
ITEM-24701 RS 552-179 Precision Liquid Dispenser Lab
ITEM-24710 ITT Instruments OX7520 Metrix Dual Channel Oscilloscope Lab Spares/Repairs [condition: Used]
ITEM-24738 Bio-Rad Benchmark 1.16 Microplate Reader with Software Lab
ITEM-24799 Olympus Highlight 2000 [condition: Used]
ITEM-24800 Olympus Highlight 3000 [condition: Used]
ITEM-24806 Tecan Genios Spectra Fluor Plus Absorbance Luminescence Microplate Reader Lab
ITEM-24837 IRORI AccuCleave 96 Vacuum Chamber Model: AC96-03 Lab
ITEM-24892 WPI World Precision Instruments ISO-NO Mark II Isolated Nitric Oxide Meter [condition: Used]
ITEM-24900 MC989 Motor Controller [condition: Used]
ITEM-25018 Palintest SA-1000 Scanning Analyzer [condition: Used]
ITEM-25079 classic prestige medical autoclave [condition: Used]
ITEM-25193 Amersham Biosciences Ettan DALTsix Vertical Electrophoresis Unit [condition: Used]
ITEM-25245 Melles Griot Laser Power Supply Model 05-LPL-915-065 Lab [condition: Used]
ITEM-25271 Signal Model 7100 Microprocessor Lab
ITEM-25272 Signal Model 7100 Microprocessor Unit Lab
ITEM-25273 Signal Hydrocarbon Analyser Model - 3000 Lab
ITEM-25274 Signal Nox Analyser Series 4000 Lab
ITEM-25284 Pharmacia Biotech GenePhor Electrophoresis Unit Code no. 18-1115-82 Lab [condition: Used]
ITEM-25286 Spectra-Physics 361C Laser Remote Control Lab [condition: Used]
ITEM-25447 Edwards Caburn GT-075-K Part no. 432022 Side Arm Ion Gauge Lab [condition: Used]
ITEM-25448 Cyonics 2500 Uniphase Remote Interface for Argon Ion Laser lab [condition: Used]
ITEM-25468 Amersham Pharmacia Biotech Electrophoresis Power Supply Model - EPS 601 Lab [condition: Used]
ITEM-25469 Amersham ETTAN IPGphor II Isoelectric Focusing System Lab [condition: Used]
ITEM-25470 Amersham ETTAN Isoelectric Focusing System IPGphor II Lab [condition: Used]
ITEM-25479 Kodak EKTAPRO HS Motion Analyzer Controller Control Pendant Model - 4540mx [condition: Used]
ITEM-25526 Skalar Sampler Type - 1000 [condition: Used]
ITEM-25571 SphereOptics SMS-500 Spectral Mesasurement System Lab [condition: Used]
ITEM-25579 Malvern Instruments Series 7032 Multi-8 Correlator [condition: Used]
ITEM-25580 Malvern Instruments Temperature Controller Photomultiplier Supplies PCS8 [condition: Used]
ITEM-25622 Roche Rapid Translation System Model - RTS 500 Lab [condition: Used]
ITEM-25650 Agilent 83402C Lightwave Source Module with Key - 1310nm 300 kHz - 6GHz Lab [condition: Used]
ITEM-26032 Liconix Helium - Cadmium Laser Model: 301 [condition: Used]
ITEM-26039 Parker Hannifan Hydrogen Gas Generator Model: 20H-MD V1.2 Lab
ITEM-26040 Parker Hydrogen Gas Generator Model: 20H-MD V1.2 Lab
ITEM-26443 IKA Ultra-Turrax T8 Laboratory Homogeniser & T8.01 S2 PSU Lab [condition: Used]
ITEM-26444 Sutter Instruments Lambda 10-3 Model: LB10-3 Optical Filter Changer Lab
£ 310.00 (ex. VAT) 1 in stock
Kontron Instruments HPLC Analysis System - 2x HPLC 360 Autosampler 2 x 325 Pump
ITEM-22042
This Kontron Instruments HPLC Analysis System was removed from a university lab where it was surplus to requirements.
The system is in reasonable cosmetic condition with marks and stains from use.
Both Autosamplers power up. The screen of S/N: 04940426 didn't power on but the screen of S/N: 12950604 was accessible. Both ran smoothly though.
Both 325 pumps powered on and the LCD screens were clear and accessible. They were not tested further.
Included all together are the following:
2x HPLC 360 Autosampler
2x 325 Pump Systems
Model: Pump System 325 D
1x Autosampler 360 Operating Manual
1x Pump System 32X Operating Manual
1x Kontron Instruments Analytical Division
1x Kontron Instruments Medical Division
£ 310.00 (ex. VAT) 1 in stock
Cytiva FlexStand Benchtop Pilot Scale Cartridge Support Assembly Lab
ITEM-36188
Cytiva FlexStand Benchtop Pilot Scale Cartridge Support Assembly Lab
This was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition with minor marks.
£ 310.00 (ex. VAT) 1 in stock
Haskris Recirculating Chiller Model: R050 Lab
ITEM-22031
This Haskris Recirculating Chiller Model: R050 was removed from a university lab where it was surplus to requirements.
The unit powers up and the warning light indicates the tank is full. It has not been tested further.
The item is in reasonable cosmetic condition but there are some stains/scratches on the outer panels as well as rust and other water damage.
£ 310.00 (ex. VAT) 1 in stock
Vacuum Generators Ltd HPLT050 5-axis UHV micro-manipulator
ITEM-19512
Vacuum Generators Ltd HPLT050 5-axis UHV micro-manipulator
This was removed from a university lab where it was surplus to requirements.
It has a UHV Magnetic Sample insertion system with a pre-chamber holding sample carousel. It is designed for use with the 5-axis manipulator.
It is in good cosmetic condition but has not been tested.
£ 310.00 (ex. VAT) 1 in stock
UVP PCR Workstation P/N 95-0367-02 Lab
ITEM-32103
This UVP PCR Workstation P/N 95-0367-02 was removed from a university lab where it was surplus to requirements.
The unit powers up and both the white and UV lights are in good working order.
It is in reasonably good cosmetic condition but the the perspex is showing some cosmetic cracking/crazing.
Inside dimensions - 55 x 71 x 68 cm
£ 310.00 (ex. VAT) 1 in stock
Beckman Coulter CEQ 8000 Genetic Analysis System CN/ 608450 Lab
ITEM-16943
This Beckman Coulter CEQ 8000 Genetic Analysis System was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
It is in good cosmetic condition with some light marks from use. It comes supplied with a model sticker/faceplate.
£ 310.00 (ex. VAT) 2 in stock
Extreme Networks Black Diamond 8800 MSM-48c Model - 41213 Network Switch Module
ITEM-19286
This Extreme Networks Black Diamond 8800 MSM-48c Model - 41213 Network Switch Module was removed from a university AV lab where it was surplus to requirements.
The unit comes with the original packaging but has been opened so we are unsure if it has been used or not. It is in good cosmetic condition.
We were unable to test it.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.
£ 310.00 (ex. VAT) 1 in stock
Illumina High-Speed Microplate Shaker C/N:11197849 Lab
ITEM-25808
This Illumina High-Speed Microplate Shaker C/N:11197849 was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition but has some marks from use and some rust on the screws.
It powers up and has been tested at multiple speeds up to 2355RPM. It works well.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 310.00 (ex. VAT) 1 in stock
Job Lot of Laboratory Power Supplies PSU Lab
ITEM-38291
Job Lot of Laboratory Power Supplies PSU Lab
This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.
None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.
The units have not been tested at all.
Included are;
ITEM-03131 Artesyn Sunfire V890 Model - 7000817-0000 1629W Power Supply [condition: Used]
ITEM-09558 Block KTV250/X Constant Voltage Holder Lab [condition: Used]
ITEM-11202 City Technology PZ110-005-00 Gain / Voltage Controller Lab [condition: Used]
ITEM-12498 RS Components 428-433 Power Supply Lab Equipment DIN rail [condition: Used]
ITEM-14306 VG Scientific Model M8 Chopper Amplifier CA2 AV Lab [condition: Used]
ITEM-14548 RS Components 591-124 Encapsulated Power Supply [condition: New]
ITEM-16844 CIT UPS-850B Power Supply Faulty [condition: Used]
ITEM-17957 Weir 761-2 Variable Benchtop Power Supply Unit Lab [condition: Used]
ITEM-17962 Topward Electric Instruments TPS-2000d Series Digital DC Power Supply Lab [condition: Used]
ITEM-18281 Farnell Stabilised Power Supply Model L30A Lab [condition: Used]
ITEM-18290 Brookdeal Electronics Low Noise Power Amplifier Type Lab [condition: Used]
ITEM-18291 Brandenburg Photomultiplier Power Supply Model 472R Lab [condition: Used]
ITEM-18297 Farnell Instruments TOPS 2 Stabilised Power Supply Lab [condition: Used]
ITEM-18374 RS Components Thandar TG501 5MHz Function Generator Lab [condition: Used]
ITEM-18379 J801 Gauge Power Supply 4 Channel [condition: Used]
ITEM-18382 100 Amp Power Supply Half-Wave Full-Wave Common Lab [condition: Used]
ITEM-18432 Pair of Olympus Tokyo TE-II Transformers P.240 V50-60Hz 5.6V5A
ITEM-18561 0-50 Vac Max Rechargable Power Supply [condition: Used]
ITEM-18574 3 x High Power Modulator Model HPM 1 [condition: Used]
ITEM-18600 Custom Made Power Supply [condition: Used]
ITEM-18602 Custom Power Supply with Crompton Gauge [condition: Used]
ITEM-18604 Custom Power Supply Unit 24Vdc - 2.5 Amps [condition: Used]
ITEM-20594 Vacuum Generators Limited Titanium Sublimation Pump Power Supply Model: SPS4 [condition: Used]
ITEM-20762 2x Farnell Instruments LTD. Stabilised Power Supply [condition: Used]
ITEM-20771 Irwin Power Supply EA3330 [condition: Used]
ITEM-24478 APC Smart-UPS SC 450 Rackmount Uninterruptible Power Supply (UPS) [condition: Used]
ITEM-25287 Unbranded Grey Rackmount UPS Part - 980-01236-00 [condition: Used]
ITEM-18389 Acoustical Mfg Co Quad 303 Power Amplifier Lab [condition: Used]
ITEM-25067 Farnell Power Supply Model D100 [condition: Used]
£ 310.00 (ex. VAT) 1 in stock
Hermle Z 400 Benchtop Centrifuge with Rotor Lab
ITEM-37869
This Hermle Z 400 Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 12500rpm.
It is in reasonable cosmetic condition with marks from use.
£ 310.00 (ex. VAT) 1 in stock
Stuart Laboratory Flask Shaker Model - SF1 Lab
ITEM-34780
This Stuart Laboratory Flask Shaker Model - SF1 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition but has some marks from use.
£ 310.00 (ex. VAT) 1 in stock
Sanyo Laboratory Incubator MCO-17AI CO2 Lab
ITEM-30546
This Sanyo Laboratory Incubator MCO-17AI CO2 was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. It has had a brand new sample pump fitted. The report is available on request. It will require calibration upon installation.
It is in good cosmetic condition with minor marks from use.
4 x Shelves 45 x 45cm
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 310.00 (ex. VAT) 1 in stock
Lot of Laboratory Vacuum Pumps, Gauges & Accessories Lab
ITEM-38285
Lot of Laboratory Vacuum Pumps
This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.
None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.
Included are;
ITEM-05190 Nanotech Pump without Motor Lab [condition: Used]
ITEM-17680 Pump House PH-2LE 2 Litre Tank Pump [condition: Used]
ITEM-18532 Vintage Medcalf Bros Junior Hy Flo Air Pump [condition: Used]
ITEM-18931 ICME High Performance Pump Motor Model M71B4 Lab [condition: Used]
ITEM-20156 CIF SIL-AIR 15 EXPORT AC Silent Air Compressor Lab [condition: Used]
ITEM-24875 Sam Medical Suction Sam 12 [condition: Used]
ITEM-25059 Welch Aspirator w/ Plastic drum Model 2511C-75 [condition: Used]
ITEM-25142 Grundfos JP5-AA-CVBP Pump [condition: Used]
ITEM-26195 SAM Medical Suction Model - SAM 12 [condition: Used]
ITEM-27765 Fisherbrand Pump Model No. FB 70155/UK [condition: Used]
ITEM-28080 Welch Dry Vacuum Pump Model No. 2545C-02 [condition: Used]
ITEM-31652 Millipore Vacuum Pump Model No. XX5522050 Lab [condition: Used]
ITEM-35000 Gast Twin Cylinder Vacuum Pump Model 72R555-V10-C222TX [condition: Used]
ITEM-02673 Edwards 7 Vacuum Pump Rotary Vane E2M0.7 Lab [condition: Used]
ITEM-11803 Leybold Heraeus Ionivac IM30 Vacuum Ion Gauge Controller Lab [condition: Used]
ITEM-17963 Edwards Pirani 502 Vacuum Gauge Controller Unit Lab
ITEM-18739 Edwards Penning CP25-K Cold Cathode High Vacuum Gauge Part no. D145-37-000 Lab [condition: Used]
ITEM-18741 Edwards Penning CP25-S Cold Cathode High Vacuum Gauge Part no. D145-33-000 Lab [condition: Used]
ITEM-18744 Edwards Penning CP25-EK Cold Cathode High Vacuum Gauge Part no. D145-41-000 Lab [condition: Used]
ITEM-18758 BOC Edwards Speedivalve SP25K N 9Bar Fluoroelastomer Diaphragm Valve Lab [condition: New]
ITEM-27969 Edwards Active Pirani Gauge APG-L-NW16 [condition: Used]
ITEM-31481 Edwards Oil Mist Filter EMF10 [condition: Used]
ITEM-19558 Hoefer Scientific Instruments PV300 Diaphragm Vacuum Pump Lab [condition: Used]
ITEM-24835 Charles Austen Pumps DYMAX 30 Diaphragm Pump Lab [condition: Used]
ITEM-25201 KNF N035.3AN.18 Diaphragm Pump Lab -
ITEM-30399 Charles Austen Dymax 30 Diaphragm Pump Lab [condition: Used]
ITEM-20531 Edwards E04 Diffusion Vapour Vacuum Pump Lab
ITEM-20563 2 x Watson-Marlow Peristaltic Pumps - MHRE 100H Lab [condition: Used]
ITEM-26453 Watson Marlow Peristaltic Pump Type: MAR-8 Lab [condition: Used]
ITEM-20740 2 x LabSmith SPS01 Programmable Syringe Pumps with Accessories Lab [condition: Used]
ITEM-24758 MG Electrical Ltd SAM 12 Medical Suction Vacuum Pump w/ Jar [condition: Used]
ITEM-26074 Leybold Vacuum Turbovac TMP 361 Turbomolecular Pump Lab
£ 305.00 (ex. VAT) 1 in stock
Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge with Rotor Lab
ITEM-25267
This Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge was removed from a university lab where it was surplus to requirements.
The item powers on and is in working order with the speed running up to 4000rpm.
The item is in a reasonable, used cosmetic condition.
It is fitted with a Fanem Rotor with 8 x 15ml Yellow buckets
£ 305.00 (ex. VAT) 1 in stock
Hitech Instruments 310 Gas Monitor, SB100 Audio/Visual Alarm & 806-117 Sensor
ITEM-23385
Hitech Instruments 310 Gas Monitor, SB100 Audio/Visual Alarm & 806-117 Sensor
These units were removed from a university lab where they were surplus to requirements.
All the units power up but have not been tested further.
Included are;
1 x Hitech Instruments 310 Gas Monitor
1 x SB100 Audio/Visual Alarm
1 x Remote Gas Sensor
806-1177
The job no. for all of the units is - S01-0048
Items 1701 to 1720 of 3070