All Products

£ 48.23 (ex. VAT) 1 in stock

Power Unit for UHV

ITEM-03535

Power Unit for UHV

£ 160.76 (ex. VAT) 1 in stock

Powersonics Bench-Top Power Supply Variable Output Transformer Lab

ITEM-11811

This unit was removed from a lab during a clearout.

We have powered it on but not tested it further.

£ 60.92 (ex. VAT) 1 in stock

Powervar ABCE1440-22 Uninterruptible Power Supply UPS

ITEM-12850

This unit was removed from a university lab during a clearout.

Unit beeps and makes a dying sound when attempting to power on - presumably the old batteries are dead and need replacing.

We have not tested the unit any further.

£ 75.00 (ex. VAT) 1 in stock

PowerVar ABCE420-22 Uninterruptible Power Supply UPS

ITEM-13771

This PowerVar ABCE420-22 UPS was removed from a laboratory where it was surplus to requirements.

The unit powers on and appears to be working but has not been tested further than this. Because it has not been used in some time, the battery life may be poor and batteries may need replacing.

The battery light flashes, but we think this may be because the battery is charging.

It is in great cosmetic condition overall.

£ 125.40 (ex. VAT) 1 in stock

PPM Base Unit Portable Precision Monitor Lab

ITEM-10676

This unit was removed from a lab during a clearout as surplus to requirements.

We have powered the unit on but not tested it further.

£ 190.98 (ex. VAT) 1 in stock

Precision 25 Reciprocal Shaking Bath Lab Equipment

ITEM-08559

This unit was removed from a lab during a clearout.

The drain is sealed shut so can't be unscrewed.

The unit is approx 62cm wide, 36cm long and 32cm tall.

The shaker works to 200rpm. The unit reaches a max temp of 85C.

£ 975.00 (ex. VAT) 1 in stock

Precor USA EFX 556 Elliptical Cross-Trainer Commercial Gym

ITEM-15382

This Precor USA EFX 556 Elliptical Cross-Trainer was removed from a university gym where it was surplus to requirements.

The unit powers on and everything appears to work as it should including the heartrate monitor. It requires an 18volts PSU for power (not inlcuded). We used our own basic 18v supply for testing.

It is in very good overall condition but it does have signs of use. The plastics are a bit broken over the rear section but this does not affect the operation of the unit. We were not able to find any operation hours screen.

£ 22.50 (ex. VAT) 1 in stock

Premium Quality 411A CF411A Laser Toner Printer Ink Cartridge Cyan

ITEM-13808

This unit was removed from a university office as surplus to requirements.

£ 22.50 (ex. VAT) 1 in stock

Premium Toner Compatible Cartridges for HP-CP1525n (Lot of 3)

ITEM-10592

These toners were removed from an office as surplus to requirements.

Premium Toner Cartridges HE-CE322A Yellow

Premium Toner Cartridges HE-CE321A Cyan

Premium Toner Cartridges HE-CE323A Magenta

£ 22.50 (ex. VAT) 1 in stock

Premium Toner Magenta HE-CE323A Compatible Cartridges for HP-CP1525n (Lot of 3)

ITEM-10591

These toners were removed from an office as surplus to requirements.

£ 305.44 (ex. VAT) 1 in stock

Prior Scientific PriorLab Binocular Microscope + 3 Objectives EA4 EA10 EA40, Lab

ITEM-10544

This microscope was removed from a lab during a clearout.

The lab manager assured us it was in working order when last used.

The microscope comes with 3 objectives:

EA4 0.10 160/-,

EA40 0.65 160/0.17,

EA10 0.25 160/-

£ 585.00 (ex. VAT) 1 in stock

PriorClave PS/MID/C36 Compact Benchtop Autoclave 36L - Spares Repairs

ITEM-09266

PriorClave PS/MID/C36 Compact Benchtop Autoclave 36L

This unit was removed from a university lab as surplus to requirements. Last recorded service was 2017.

We were assured by our contact that the unit was in working order when last used.

However, the door won't open when the unit is running - you can open the door manually using the solenoid controlled sprung pin. But there is some fault with the door - possibly the solenoid. There is also a service light showing.

Unit is sold as spares / repairs.

£ 450.13 (ex. VAT) 1 in stock

Programmed Test Sources PTS-300 Frequency Synthesizer

ITEM-09724

This unit was removed from a lab as surplus to requirements and we were assured the unit was in working order prior to removal from the lab

However, we have only tested it to power-on ourselves.

Therefore we are happy to sell the unit on the basis that it is in working order, and if you encounter any problems we can offer a 90-day return to base warranty.

Within the UK, we will also arrange the return postage so you are not out of pocket if a problem does arise with the unit.

£ 37.50 (ex. VAT) 1 in stock

Protective Shield For a Packard MPIIB Machine Lab

ITEM-14581

This Protective Shield For a Packard MPIIB Machine was removed from a university where it was surplus to requirements.

We are not sure exactly what machine this is designed to fit, but it is 85x67x17cm LWH.

It is in great condition, but has been previously used.

£ 637.50 (ex. VAT) 1 in stock

Protein Solutions DynaPro 99 E-50 Molecular Sizing Instrument & MSX Microsampler

ITEM-13693

This Protein Solutions System was removed from a university lab as surplus to requirements.

The units power on and are in very good condition. However they have not been tested further than this.

Manuals, software and 2 x 20ul sample prisms included.

£ 1,015.31 (ex. VAT) 1 in stock

PSIA XE-100 Atomic Force Microscope Controller XE100C. Lab

ITEM-12777

This listing for the PSIA XE-100 Controller ONLY.

This was taking from a working environment. We do not have the main microscope to go with this unit.

We have powered it on but cannot test further.

£ 225.00 (ex. VAT) 1 in stock

PTI F21S 8x50 Fixed Angle Centrifuge Rotor Lab

ITEM-13762

This PTI F21S-8x50 Centrifuge Rotor was removed from a university as was surplus to requirements.

It is in excellent condition but has however not been tested by us. It will need to be inspected for safety before it is used.

The buckets are 28mm in diameter. The whole unit is 240mm in diameter and 170mm tall.

£ 180.00 (ex. VAT) 1 in stock

PTI FAS-14c Fixed Angle Centrifuge Rotor Lab

ITEM-13760

This centrifuge rotor was removed from a university lab where it was surplus to requirements.

The unit is in very good condition and there are nothing but minor scratches on it. It however has not been tested by us so will need to be inspected for safety before it is used. The buckets are 60mm in diameter.

£ 1,125.00 (ex. VAT) 1 in stock

PTI FiberLite F10-6x500y Fixed Angle Centrifuge Rotor 250ml Adapter Sleeves Lab

ITEM-13894

This PTI FiberLite F10-6x500y Fixed Angle Centrifuge Rotor was removed from a university as surplus to requirements.

It has 6x500ml tube holders as well as 6x500ml to 250ml adapter sleeves (010-0151-02)

10,000rpm 17,700 x G.

The rotor and the sleeves are in good condition but have previously been used. This has not been tested by us so will need to be inspected for safety before use.

For use with Beckman™ J2 Series Centrifuges, Beckman™ J2, Avanti Series Centrifuges, Thermo Scientific™ Jouan KR22i Centrifuges & Hitachi™ Himac CR21/CR22 Series Centrifuges

£ 1,050.00 (ex. VAT) 1 in stock

PTI FiberLite F14-6x250y Fixed Angle Centrifuge Rotor Lab

ITEM-13910

This PTI FiberLite F14-6x250y Fixed Angle Centrifuge Rotor was removed from a laboratory where it was surplus to requirements.

14,000rpm 30,100 x g

The rotor is in very good cosmetic condition but has not been tested by us. it will need to be inspected for safety before it is used.

It comes with a blue rubber stand, some spares, and some manuals (see pictures for more info).

Filter products

All Products