Peak Performance Technologies Event Synchronization Unit.

This item was removed from a sports science department during a clear out.

Unable to test as the fuse holder is missing so we cannot power it on.

Unit is in good cosmetic condition.

Please see photos for further details.

This Peak Scientific Industries MS Table Model Table 3-1B was removed from a university where it was surplus to requirements.

The unit powers on and the fans operate. It has not been tested further than this.

It does not appear to have a door.

It is cosmetically in good condition but the right-side panel has some scratches and dents.

This Peqlab Pepstar 96 Universal Thermal Cycler was removed from a university lab where it was surplus to requirements.

The unit powered up but kept cutting out after a few seconds. It has not been tested further.

It is in reasonably good cosmetic condition with some marks from use.

It has a 96-well heating block for 0.2ml tubes.

This Peqlab Pepstar 96 Universal Thermal Cycler was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included)

It reached 95˚C when set and cooled down quickly to 37˚C when changed to that temperature.

It is in reasonably good cosmetic condition with some marks from use.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

This Percival Scientific Growth Chamber Model - I-36LLVL was removed from a university lab where it was surplus to requirements. The lab assured us it was in full working order.

Unit dimensions - L86 W86 H207cm

Inside dimensions - D76 W74 H145cm

4 Shelves - 69.5 x 63.5cm

The unit powers up and has been tested with a digital thermometer.

When set to -18˚C the temperature dropped to -8˚C after about 4 hours. The display was showing -4˚C.

When set to 40˚C the temperature dropped to 33˚C after about 4 hours. The display was showing 40˚C.

When set to 60˚C the temperature dropped to 60˚C after about 4 hours. The display was showing 65˚C.

We had to set the dial between 40 and 50 to get a reading of 37˚c on the thermometer.

Only 2 of the shelf light tubes work, when the fluorescent side lights are switched on they flicker but don't stay on.

It is in reasonably good cosmetic condition with some marks from use.

This Perifill IQ2000 Peristaltic Dispenser Pump Mk.3 was removed from a university lab where it was surplus to requirements.

The unit is in good used cosmetic condition but it does have some marks and signs of general use.

The pump powers up and is running. You can feel it sucking when it is running a cycle. It has not been tested with a gauge or with samples but appears to work as far as we can reasonably tell.

It comes with some lengths of tubing, two Glass ends and a footswitch.

This unit was removed from a chemistry lab as surplus to requirements.

We were assured the unit is in working order, but have only tested it to power-up ourselves.

This Perkin Elmer 7 Series/UNIX DSC 7 Differential Scanning Calorimeter was removed from a university lab where it was surplus to requirements.

The DDC 7, the TAC 7/DX and refrigeration unit all power up and but have not been tested further.

The system is in reasonable cosmetic condition but has some marks from use. The pipe cladding between the DDC 7 and the refrigeration unit crumbles to touch.



Included with this system are the following:

1x Thermal Analytical Controller

TAC 7/3

1x Differential Scanning Calorimeter

DSC 7

1x Stage 1 & 2 Refrigeration Unit

Model no: FC-100-PED

1x Users Manual

1x DB25 parallel port

1x Sample Holders

1x Aluminium cover

This Perkin Elmer 7 Series/UNIX DSC 7 Differential Scanning Calorimeter System was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition but it has signs of prior use, such as scratches. The foam padding of the DSC 7's interior has begun to crumble.

Both the TAC 7/DX and DSC 7 powered up. The TAC 7/DX was tested with a cable from another system as it powers up through the DSC 7. This cable is not included.



Included with this system are the following:

1x Thermal Analytical Controller

TAC 7/DX

1x Differential Scanning Calorimeter

DSC 7

1x Users Manual

1x Large Volume Capsules

0319-0218 REV.E

5x Sample Holders

Perkin Elmer 8700 Gas Chromotagraph

Perkin Elmer AAnalyst 100 Atomic Absorption Spectrometer Lab

This unit was removed from a lab during a clearout.

We were assured the system was in full working order, however we do not have the software or PC.

We have powered on the unit but not tested it further.

This Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer System & Accessories was removed from a university lab where they were surplus to requirements.

The units are in reasonably good cosmetic condition but the AAnalyst is missing a leg. It will stand straight if no weight is put on the back of the unit.

Both the cooling system and the AAnalyst power up but they have not been tested further. The lab manager stated to us that is reportedly fully working but has not been used for a number of years.

The lot contains:

1 x Perkin Elmer AAnalyst 600 Unit.

1 x Perkin Elmer AS 800 Autosampler With Carousel Wheel And 2 Bottles.

1 x Metal Shelf (Unsure Where It Goes).

1 x Perkin Elmer Cooling System Unit.

2 x Used LabHut Hollow Cathode Lamp No Manual.

3 x Used LabHut Hollow Cathode Lamp With Manual.

3 x New LabHut Hollow Cathode Lamp No Manual.

3 x New LabHut Hollow Cathode Lamp With Manual.

1 x Used Heraeus Hollow Cathode Lamp With Manual.

1 x New Heraeus Hollow Cathode Lamp No Manual.

1 x Used Perkin Elmer Hollow Cathode Lamp No Manual But In A Heraeus Box.

1 x New LabHut Hollow Cathode Lamp No Box.

This Perkin Elmer AAnalyst 800 AtomicAtomic Absorption Spectrometer System was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition but has some marks from use.

The cooling system powers up but makes a very loud noise. The AAnalyst itself was not powered up as it was previously hard-wired. The system was not tested further.

The lot contains:

1 x Perkin Elmer AAnalyst 800.

1 x Perkin Elmer AS-800 Autosampler With Carousel Wheel Inside & 2 Bottles.

1 x Perkin Elmer Furnace Cooling System.

1 x Cable.

3 x Hoses.

1 x Black Cover (Unsure What For).

1 x Spare Carousel Wheel.

2 x 3007 1145 Washers.

2 x 3004 7209 Washers.

1 x 3006 6549.

1 x Stratlab 172053.

9 x Zeta 2ml Conical capsules.

1 x Perkin Elmer Upgrade Deewey Drain Kit.

4 x Perkin Elmer THGA With End Caps Graphite Tubes.

1 x Stratlab Red Hollow Cathode Lamp 173245.

2 x Perkin Elmer Atomic Spectrometry Guides.

1 x Perkin Elmer THGA Graphite Furnace User Guide.

1 x Perkin Elmer AAnalyst 800 User Guide.

1 x Perkin Elmer Burner System User Guide.

1 x Partial Box Of AAnalyst 800 Accessories.

Multiple Furnace Accessories.

Multiple WinLab32 Software CD's.

Multiple Bags Of Capsules.

Perkin Elmer AutoSystem XL Gas Chromatograph Lab Equipment

This unit originated in a Lab in a top UK University. The unit powers on but we have been advised it is faulty. The Lab has not attempted repair due to it being surplus to requirements.

We do not have the expertise to diagnose fault.

The unit has been unused for a period of 6 months.

230Vac

50/60Hz

2400VA Max Power

This Perkin Elmer Flow Cell was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with very limited usage marks. It has not been tested.

This Perkin Elmer FT-IR Spectrum 2000 System was removed from a university lab where it was surplus to requirements.

Everything is in reasonably good cosmetic condition but has marks from use.

This lot contains;

1 x Perkin Elmer AutoIMAGE System.

The unit shows 'Power On' when switched on. We were not able to test it any further.

1 x Perkin Elmer FT-IR Spectrum 2000.

Unit shows 'Power On' & Laser On' power LEDs when switched on.

The unit also includes a Perkin Elmer Spectrum 2000 NIR FT-Raman. This unit is not attached to the main system but should be bolted together. We are unsure of the working condition of the unit. There may be parts missing.

1 x Perkin Elmer Box of spare parts.

1 x Perkin Elmer TL 2000 Headed Transfer Line.

The unit Shows 'Power On' & 'Ready' LEDs when powered up. It was not tested any further.

The 'Heated Line' input is not secured in the back of the unit.

1 x Perkin Elmer FT-IR Starter Kit.

A wooden case containing various parts. We are unable to tell if everything that should be is in the case. The foam interior has deteriorated.

This piece of equipment has been taken from a UK University. It comes with a computer, monitor, keyboard and mouse. 

The software runs but we were not able to get it to connect to the unit - though we have not previously used this system ourselves so it is likely to be user error on our part.

This Perkin Elmer GeneAmp 9600 PCR System was removed from a lab during a clearance.

The unit is in reasonable condition but has been previously used.

It powers up fine and heating and cooling lights come on. We were unable to test it any further.

It is supplied with:

1 x Tube - Portex 800/010/455/800 8mm x 11mm.

1 x open bag of 100 x Wheaton black plastic screw-caps - Only 11 remaining.

2 x small beige pads.

3 x skull and crossbones warning tabs.

• From top UK University 
• Pulled directly from a working lab
• In good condition
• Powered up but not tested any further
• Model - LS 50B

This Perkin Elmer Luminescence Spectrometer LS-5B originated in a working Lab in a top UK University and came to us as part of a Lab clear out.

Listed as spares repairs. Keeps blowing the fuse next to mains supply.