Applikon Bioreactor System & GEA (Westfalia) SD1-06-107 Continuous Flow Centrifuge – Lab

This system was removed from a facility where it was surplus to requirements.

The previous owner stated that the GEA (Westfalia) continuous flow centrifuge was in working condition, however the system has not been used in some time and the client advises that a full service is required prior to use, particularly due to high-pressure steam risk.

Included Equipment

Bambi VTS 150

• S/N: VS150-00175

Camptel by Anghinetti 50 Boiler

Unbranded Boiler Tank

Applikon Biotechnology Bioreactor System

• Overall good cosmetic condition.

ez-Control Bioreactor Controller

• S/N: Z310110010

BIO Bench 30L Vessel

• Equipment No: V6LUK10301
• S/N: 07N002424
• Design according to PED 97223

Water Circulation System

Grundfos Class F UP 20-15 N 150 (P/N: 59641500)

• TSH-2.01 temperature sensor
• 10 × ASCO 2-way solenoid valves

Instrumentation & Control

Finesse TruCell2 Cell Density Sensor

• Model: TXN-CDS-AOI-3
• S/N: C01078072

Masterflex Console Drive

• Model: 77521-57
• Part No: 4,813,855

Intel E-System Laptop (Pentium Dual-Core T2370, 1.73GHz)

• Powers on; software loads successfully.

Includes Applikon BioXpert v2 Supervisory Control & SCADA Software

• Version: 2.91.119

BioXpert v2 USB stick included

GEA Westfalia Separator & Control Panel

• Model: SD1-06-107

Water Treatment & Pumps

• Pentair Water Softener
• Fleck 4600 residential water valve

Grundfos JP 4-54 Pump

• No. 99458789

Accessories / Spares (Included)

• Various valves and piping
• Anderson-Negele pressure gauge
• Klüberoil 4 UH1 68 N lubricant
• Bag of spare parts for GEA separator:
• Gaskets
• Shaft sealing rings
• Grooved ball bearings
• Rubber-metal cushions
• Rubber-metal bush
• Sanitrx 40mm rupture disc
• Tub of metal clamps, bolts & fixings
• Various metal pipe attachments
• Spare cables and tubing
• 2 × Parker high flow Tetpor II demi cartridges
• 1 × Applikon pH sensor (Z001012051)

Rofin Combiline Basic WT Marking Laser – PowerLine Pico

This system was removed from a laboratory where it was surplus to requirements.

Due to limitations with testing Class 3+ lasers at our facility, we were unable to carry out functionality tests. However, the unit was operational during its last known use in a controlled lab environment in 2023, with no performance issues reported.

It is in good cosmetic condition.

The system comprises the following:

• Rofin Combiline Basic WT enclosure with integrated laser handling
• Coherent PowerLine Pico laser module
• Fuchs Umwelttechnik MKF335.2 fume extraction unit
• Type: MKF335.2
• Serial No.: 180552
• Operator control with ELO Touch Solutions TouchMonitor
• Documentation and accessories:
• Combiline Basic WT Operator Manual Version 2.2
• Visual Laser Marker Operator Manuals Version 5.1 / 5.2.3
• Coherent Rofin Combiline Basic Documentation CD
• Coherent Operator’s Manual
• Equipment Number Handling - 40386850
• Laser Equipment Number - 40386849

Model: Combiline Basic WT

Laser Type: PowerLine Pico

Allen & Heath iDR-8 Audio System

This system was removed from a premier UK broadcasting company where it was surplus to requirements.

The system powers up and is in good used cosmetic condition.

All components are housed in an 18U wheeled flight case. Note: The main Neutrik power cable is missing; power must be connected via individual IEC cables with this not present. The Audio-Technica microphones have not been tested.

The system comprises the following:

• 1 x 3U storage drawer
• 1 x Allen & Heath iDR-Out
• 1 x Allen & Heath iDR-8
• 1 x Allen & Heath PL-6
• 1 x SONIFLEX Redbox RB-HD-6
• 1 x Thomann E-800 the t.amp (2 x 490watt @ 4ohm output)
• 1 x Asus Windows 7 PC with touchscreen display:
• Intel Core i3-4160 CPU @ 3.60GHz
• 8.00 GB RAM
• 64 Bit OS
• Software installed: Jazler Show 2, Audacity 2.0.6
• 1 x One4Power MDU-14 power distribution unit
• 1 x 1U input strip for all Mic & Speaker ins & outs
• 4 x Audio-Technica P48 AT2020 cardioid condenser microphones with clips (untested)

Rigaku ZSX Primus WD-XRF System with Industrial Chiller, PC & Accessories

This system has been removed from a facility as part of a surplus clearance.

The Rigaku ZSX Primus is a wavelength dispersive X-ray fluorescence (WD-XRF) system used for elemental analysis in industrial and laboratory environments.

The system has been serviced, with the last service carried out in September 2025. It is reported to require minor repairs, as the unit struggles to maintain vacuum.

Main System

• Rigaku ZSX Primus WD-XRF System

Support Equipment:

• Van Der Heijden Industrial Chiller Unit 221-R102 AA FB (S/N: SZ170511) with Controller (powers on)
• Thermo Scientific Barnstead B-Pure 7113 (S/N: 250923-233)
• 2 x ULVAC GLD-136A Vacuum Pumps
• Rigaku MHPS-4S PSU/Controller
• Sci-med PSU (32A 5 pin)

Computing & Software:

• Dell PC and Monitor with ZSX Software (product key not included)
• ZSX Software Disks

Documentation:

• XRF Theory Training Document
• Rigaku Maintenance Documentation
• Rigaku User Manual

Additional:

• Tubing
• Various accessories, parts and tools

SDL Atlas Rotawash Laboratory Textile Washing Machine – Simulated Wash Tester System

This system is being sold on behalf of a client and is surplus to requirements.

It is approximately 2 years old, hardly used, and remains in excellent cosmetic condition. The unit has seen limited operation during a single project. No routine service history is recorded; however, the motor (the only mechanical component) was repaired and replaced approximately 18 months ago.

The Rotawash is a laboratory-scale washing machine designed to simulate real textile laundering conditions under controlled, repeatable parameters. It includes onboard software functioning as the machine interface, pre-loaded with standard ASTM and ISO wash programmes as well as customisable temperature and timing settings.

The sale includes 8 × 1200mL wash containers with seals and 100 stainless steel agitation balls. Software is installed directly on the machine and does not require updating. No additional accessories are included beyond those listed.

Packaging assistance may be possible via palletisation or protective boxing, subject to arrangement.

Collection is available from Haverhill, Suffolk, UK.

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

These Competition Basketball Goals are sold on behalf of a University in Scotland.

The previous client has notified us that these items are in very good condition with little use.

This mobile basketball system features two mobile and two stationary wheels that retract or extend when the unit is lifted or lowered. It includes a 15 cm thick shield covered with synthetic, washable material and tempered safety glass boards with protected lower edges.

The complete system weighs approximately 1050 kg and includes:

• Two tempered safety glass boards (180x105 cm, 12 mm thick) with edge covers
• Two basketball rings with nets
• Rear plates for anchoring to the floor

Specifications:

• Projection: 325 cm
• Required setting length: 425 cm
• Dimensions when folded: 410x185x170 cm

The system complies with FIBA standards (Level 1).

This item will require collection from: UHI Perth, located in Perth, Scotland.

These can either be sold as a pair or individually.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Olympus BX-61TRF Microscope System

This system was removed from a university lab where it was surplus to requirements.

All components are in good used cosmetic condition and power on.

This system has been professionally serviced, the full service report is available on request.

The system consists of the following components:

• Microscope Base: Olympus BX-61TRF
• Olympus U-CMAD3 Camera Adapter
• Olympus U-TV1X2 Camera Adapter
• Olympus U-TR30-2 Trinocular Head
• Lumen Dynamics 810-00032X X-Cite Adapter
• Olympus U-SVRB-4 Manual Stage
• Olympus U-HLDT-4 Slide Holder
• Olympus U-UCD8A Condenser
• Olympus U-LH100L-3 Lamp

• Controllers and Power Supply:
• Olympus BX-UCB PSU/Controller
• Olympus U-HSTR2 Handset Controller
• X-Cite 120Q with EXFO Lightpipe
• 2 x Control Cables

Objectives Included:

• Olympus UPlan FL N 10x/0.30 ∞/-/FN26.5
• Olympus UPlan FL N 20x/0.50 ∞/0.17/FN26.5
• Olympus UPlan FL N 40x/0.60 ∞/C-2/FN22
• Olympus UPlan APo 40x/1.00 Oil Iris ∞/-
• Olympus UPlan FL N 40x/1.30 Oil ∞/0.17/FN26.5

Eyepieces:

• 2 x Olympus WH15X/14

This Ready to Process Wave 25 Bioreactor System was removed from a university lab where it was surplus to requirements.

None of the items have been tested because the power supply was not included.

The system is in good cosmetic condition with minor marks from use.

Included are;

1x GE Ready to Process CBCU

Code no.28998100

Mfg year 2015

1x GE Ready to Process Pump 25 w/ 2x pump heads

Code No. 29000704

Mfg year 2015

There is some damage to the housing of the unit on the bottom LHS of the unit -as seen in photo.

2x PumpHeads:

114DV OEM Pumpheads

Prod Nos.

113.5000.R33

Ser Nos.

66056-2

66056-3

Mfg 2015

1x Icellis Docking Station

Prod No. 820284

The unit is in good cosmetic condition

The unit has a 32 Oz Nalgene vessel,

1x PALL Life Sciences Icellis Nano lid

Ser No. P004_G_169

1x Hamilton Visiferm DO 120 Sensor:

Part no. 242450

Heat Nos.

•541742

•425755

Ser No. 026570

1x Icellis Perfusion Module w/ 2x pump heads

Prod No. 820288

Pumpheads:

102R Twin Roller low-flow

Prod No. 013.211.000

Yokogawa Cell Voyager CV1000 System w/ PC & Software Lab

This system was removed from a university lab where it was surplus to requirements.

All units that form the system are in good cosmetic condition and powered up.

The system appears to be in full working order, we were able to obtain a live feed from the camera - See end of the slideshow.

The PC Has the following software installed:

CV1000 Software 1.06.06

With the use of the software we can control the following on the Main unit:

Open/Close Tray

Adjust Temperature

Adjust Plate Configuration

Change Objective

Adjust Camera Position

Included are;

Yokogawa Cell Voyager CV1000

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400006

Yokogawa Cell Voyager CV1000 Utility Box

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400012

PC Set Up.

Dell Flat Panel Monitor P2719H

Serial#: CN-09PR6R-WS200-89C-367S-A01

Dell Precision T1700 PC

Serial#: F2VM202

Dell Keyboard & Mouse

PC Has the following software installed:

CV1000 Software 1.06.06

Objectives in main unit:

UPLSApo10x2

UPLSApo20x

UPLSApo20x0

UPLFLN40x0

UPLSApo40x2

UPLSApo60x0

InBody 970 Body Composition Analyser

This item is sold on behalf of a client. It is surplus to requirement.

It is in nearly new condition, lightly used, and in complete working order. The manufacturer’s guarantee has ended, but it can be extended by the new owner.

Includes:

• Full software package, manuals, and support
• Cloud-based Lookin’Body Web data management platform for professional analysis
• Mobile InBody App for individual user access and recommendations
• Physical results sheet printing capability
• USB data export and backup functions
• WiFi and Bluetooth connectivity
• Fingerprint and barcode integration options
• Compatible with peripheral devices such as BSM 170B, BSM 270B, BPBIO 320S, BPBIO 750, and InGrip

Typical specifications:

• Body composition analysis via medical-grade multi-frequency bioelectrical impedance technology
• Measures key health indicators including body water, protein, and mineral composition
• Provides detailed analytical reports for professional or personal health monitoring

It is available for collection from Raynes Park Station (Alborz Fitness).

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Thermo Fisher Tecnai G2 Spirit Transmission Electron Microscope

This item is sold on behalf of a client where it is surplus to requirements.

This system is in good cosmetic condition and in complete working order.

It has been under a Thermo Fisher service contract since installation in January 2018, with annual preventative maintenance checks. The most recent service was carried out on 09/10/2023, and the chiller was repaired in January 2025. The system was taken out of use shortly after in preparation for installation of a new TEM.

Includes:

Cryobox (installed)

Single tilt sample holder

Fischione room temperature tomography holder (±70° tilt range, available for inclusion)

Air-cooled water chiller

Two computers: one for microscope operation and one networked support PC for remote engineer access

The system has been professionally decommissioned and prepared for transport. It is ready for reinstallation by a suitably qualified transmission electron microscope service provider.

A recommendation for a trusted recommissioning specialist can be provided upon request, with on-site setup available at an additional cost.

Combined system dimensions (W × L × H): approx. 300 × 250 × 220 cm

This item is non-returnable and non-refundable. The normal UniGreenScheme terms and conditions do not apply.

Shimadzu HPLC System with SIL-20A, LC-20AD, DGU-20A5, CTO-20A, SPD-20AV & Sedex 90 ELSD

This item was removed from a facility where it was surplus to requirement.

The Shimadzu HPLC system is designed for high-performance liquid chromatography applications, commonly used for chemical analysis and separation in laboratory environments.

The system powers on. However, no further functional testing has been carried out.

Please note; the SPD-20AV detector displays a red light with the message “254nm -0.00 AU Check no good.”

The included Sedere Sedex 90 ELSD detector powers on, but the internal glassware on the outlet pipe is broken.

Included:

• Shimadzu SIL-20A Autosampler (S/N: L20164200138 SA)
• Shimadzu LC-20AD Pump (S/N: L20104370018 US)
• Shimadzu Reservoir Tray (S/N: L20304200178 SL)
• Shimadzu DGU-20A5 Degasser (S/N: L20244200349 CR)
• Shimadzu CTO-20A Column Oven (S/N: L20204200140 NJ)
• Shimadzu CMB-20A Controller (S/N: 228-45012-38)
• Shimadzu SPD-20AV Detector (S/N: L20134200736)
• Shimadzu FRC-10A Fraction Collector (S/N: C20374204090 SA)
• Sedere Sedex 90 LT-ELSD Detector (S/N: 151090136A)

PTI Photon Technology International High Resolution Dye Laser & Nitrogen Laser System

This system was removed from a facility where it was surplus to requirements.

The equipment is in good cosmetic condition with typical signs of previous laboratory use. Due to safety restrictions on testing Class 3+ laser systems at our facility, the system has not been powered on.

The High Resolution Dye Laser and Nitrogen Laser units were manufactured in 2012, while the GL-303 Frequency Doubler is an older unit manufactured in 2002.

The previous owner stated the system was in working order prior to removal.

System Components

Nitrogen Laser – Model GL-3300

• Manufactured: September 2012
• Serial Number: 1506

High Resolution Dye Laser – Model GL-302

• Manufactured: September 2012
• Serial Number: 1506

Frequency Doubler – Model GL-303

• Manufactured: April 2002
• Serial Number: 1290

BryteBox – Version 2.2

• Serial Number: 2277

Photon Lamp Power Supply

• Serial Number: 2071-LPS220B

Photon Control Module

• Serial Number: 1073-TCM1000

Photomultiplier Detection System

• Serial Numbers: 5643-MONO / 5335-ELTRO

Fluorimeter System

• Serial Numbers: 2883 / 2397-MP1

This was removed from a university lab where it was surplus to requirements.

The room is currently disassembled and for collection only in Bedwas, Caerphilly UK

Everything is in good cosmetic condition with minor marks. It was in good working order prior to disassembly.

Double doorway entry:

2x Sliding Doors:

5x doorway wall panels:

Perspex panels:

•14x 105 x 98cm white panels

•1x 105 x 98cm clear panel

•2x 118cm x 104 cm white panels

• 4x 115 x 96cm thicker white panels

• 7x 96 x 96cm thicker white panels

Rubber Seals:

The seals go around the perspex panelling. -as seen in photos.

22x large rubber seals

4x smaller rubber seals

1x Monmouth Circulaire air vent:

Model WCAM 2250

Air Vent Dims:

D47cm x W102cm x H96cm

2x Air Vent Legs:

The units are in good cosmetic condition and are adjustable.

1x Monmouth Scientific ON/OFF Switch:

Aluminium Frame:

6mm Hex Key to be used to attach and tighten sections together

•2x lengths of 317cm x5cm

•4x lengths of 196cm x 5cm

1x length of 217cm x 5cm

5x lengths of 230cm x 3cm

Packard Cobra II Gamma Counter Model D5010 System Lab

This system was removed from a university lab, where it was surplus to requirements.

All included units are in good cosmetic condition and powered on.

The system is fully functional, and the PC powered on successfully. The software and syringe runners are operational, though the system requests a printer connection. Overall, the system is ready for use and in working order.

Also included are the following;

1x Dell Monitor M

M/N: E773s

S/N: MY-OY1352-47603-4B4-B7T3

9x Syringe type tubes

1x Keyboard PS2

1x Bag of plastic tips

3x Plastic tip holders

5x Plastic lids

2x VGA type cables

2x Power leads

1x Power lead adaptor

2x Metal hook fixtures

2x 2 amp fuses

1x 15 amp fuse

1x Length of plastic tubing

1x bag of of metal hook fixtures

2x Thin wired VGA type connectors

6x Pipe connectors

1x Box of thin glass tubes (x5)

2x Boxes of assorted fixtures and fittings

1x Force Sensor (capteur de force)

M/N: ELJ-S045C-35G

S/N: R04074

1x Floppy Disc Cobra II Backup

ProBike Fuchs BEI261 Motorbike Dynamometer (Dyno) w/ Fuchs Dyno software

This system was removed from a facility where it was surplus to requirements.

The previous owner stated that the unit is a motorcycle dynamometer in nearly new condition and almost unused. They also advised that the software is out of date, but that the system is otherwise working.

Cosmetically, we would describe the overall condition as good, with some signs of use and light rusting present, which is to be expected given the nature of the equipment. The unit is split down and palletised and, as such, we were unable to test the dynamometer as a complete system. However, the Hydrovane pump was able to be powered on and has passed PAT testing.

For reference, ProBike state that they offer upgrade and installation packages for Fuchs BEI261 dynamometers, including hardware/software upgrades and support for reinstallations, updates and spare parts.

Included Components:

• Main body
• Glass panel sides
• Rear ramp (attaches to rear)
• Head unit (sits on top; houses PC system — PC not included)
• Roller / motor
• Eddy current brake (BEI261 model feature)
• Brackets and air hood (see pictures)
• Large Hydrovane pump

• PC - Dell Dimension 2400 w/ Fuchs Dyno software
• Monitor - LG 19"
• Dell keyboard
• HP Mouse
• VGA Cable
• Comms cable

Nikon Optiphot Microscope with Microflex HFX-II & FX-35A Photo Attachments

This item was removed from a facility where it was surplus to requirements.

The microscope is in very good condition for its age and appears to have been carefully maintained.

The focusing wheels lift and lower the stand but are very stiff, suggesting the mechanism would benefit from cleaning and re-greasing.

All objectives and eyepieces were tested using a sample slide and produced clear images.

The camera system fires, rewinds, and responds correctly to controls on the HFX-II, including the handheld switch and timer. No further testing has been carried out.

Included Components:

Nikon Optiphot Microscope

S/N: 120158

Nikon Microflex HFX-II

S/N: 241341

Nikon FX-35A Camera Back

S/N: 7586982

• 2 × Original manuals (Optiphot and Microflex HFX)

Eyepieces:

• CFW10x and CFW10xM (fitted)
• Spare CF PL 2.5x
• Spare CFW10x

Accessories:

• 3 × new boxed Thorn projector lamps
• 7 × Nikon objective holders with dust caps
• 6 × filters
• Nikon Type 104 cover

Objectives Included:

• Plan 2/0.05 160/– (stored in holder)
• Plan 4/0.10 160/–
• Plan 10/0.25 160/–
• Plan 20/0.40 160/0.17
• Plan 40/0.65 160/0.17
• Plan 100/1.25 Oil 160/0.17

Eksigent NanoLC-Ultra 2D Plus, NanoLC-as-2 Autosampler, cHiPLC LC System Lab

This item was removed from a university lab where it was surplus to requirement.

Each included unit is in good cosmetic condition and power on. The previous owner has stated the system was in complete working order prior to it being decommissioned in 2020, they also noted that all required cables (Power & Connecting) are included.

System consists of;

• Eksigent NanoLC-ultra 2D Plus

  Serial No. 11-01-15-236

• Eksigent NanoLC-as-2 autosampler

  Serial No. 111271

  Year 2016

• Eksigent cHiPLC Nanoflex docking station

  Serial No. 11-01-18-228

• Eksigent eks-PS-250 power supply

  DC24v/DC5v

  Part No. 800-00293

  Serial No. 38080411

• Protek Power 24v AC adapter

  Model PUP180-14

  Serial No. 113475

Also included;

• 1 x spare Powermax ll pump for NanoLC-ultra-2D model P21NSXC-LSS-NS-15 part No. 3000621
• 2 x 250 Nalgene bottles with caps
• 3 x data cables
• 1 x 12 position sample tube holder
• 1 x 2.4 um needle part No. 5820.3010
• 1 tubing set 845 1/32"
• 3 x packs of 10 tubing sleeves
• 2 x lengths of 10mm tubing
• 5 x used sample needles
• 1 x pump head manifold

Hamilton Microlab Star Liquid Handler System

This system was removed from a university lab where it was surplus to requirements.

The system powers on and is in excellent cosmetic condition.

According to the previous owner, the system is fully operational but was sold due to lack of use and space constraints.

They also notified us that it was retrofitted with a 96well head just a few years ago.

This item was last serviced in March 2023.

Model: Microlab Star

Serial No.: 1238

Included Components:

• ONEAC Power Supply Unit (PSU)
• Model: MCU500
• Serial No.: W05/00416/3

• Microlab Star Pump Unit P
• Part No.: 186375/01
• Serial No.: 1057

• CO-RE Tips:
• (10 Boxes) x 12 x 480 50μl filter tips (Pink Label)
• REF: 235979, LOT: 7143772, GTIN: 07630032624023, Expiration Date: 2024-10-28
• (1 Box) x 8 x 480 High Volume Tips (White Label)
• REF: 235939, LOT: 4120811, GTIN: 07630032623910, Expiration Date: 2024-04-28
• (12 Boxes) x 480 Standard Volume Tips (Yellow Label)
• REF: 235937, LOT: 4148305, GTIN: 07630032623880, Expiration Date: 2024-10-28

• Software: Hamilton Microlab STAR Venus Four Base Package 4.5 (USB Drive)

• Additional Accessories:
• 13 x Mixed Plate Carriers

Photocentric Liquid Crystal Magna 3D Printer with Wash Unit & Cure L – Laboratory Resin Printing System

This equipment is being offered on behalf of a client, where it is now surplus to requirements.

The system comprises a Photocentric Liquid Crystal Magna resin 3D printer, together with a Photocentric Wash Unit and Photocentric Cure L UV curing oven, providing a complete workflow for resin printing, post-processing, and final curing of printed components.

The printer operates using Photocentric’s LCD-based photopolymerisation technology, allowing large-format, high-resolution resin printing suitable for prototyping, research, and engineering applications.

The Photocentric Cure L UV curing unit requires maintenance, as the UV lamps currently require replacement and are not functional at present.

The system includes Photocentric Studio software, with the licence stored on a USB memory stick.

The client has advised they are able to palletise and wrap the equipment for transport if required.

Includes;

• Photocentric Liquid Crystal Magna 3D Printer
• Photocentric Wash Unit (99L)
• Photocentric Cure L UV curing unit
• Photocentric Studio Software licence (stored on USB memory stick)
• Resin sonicating bath
• Approx. 5L resin (available if required)

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

Becker DT4.8 Oil Free Rotary Vane Compressor

This item was removed from a facility where it was surplus to requirement.

It powers on with no fault noted.

Jun Air OF302-15B Air Compressor

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Hyundai HY30100V 100L Compressor Tank

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. The lab confirmed it was working prior to removal.

BAMBI PT5 Oil Free Air Compressor Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order, the previous owner described it as relatively new.

Jun-Air Compressor Model 12-40

This item was removed from a facility where it was surplus to requirement.

It powers on and is in very good condition with minimal wear. The unit was only powered on briefly, as the oil had been expelled. Therefore, no further testing was carried out.

Specifications:

• Pressure: 12.2 bar
• Minimum Operating Temperature: 10°C
• Maximum Operating Temperature: 50°C

Jun-Air Model 6/6-4 Quiet Running Compressor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

We are unable to test it further at our facility.

Jun-Air 4000-40M Cabinet Compressor

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear.

The unit successfully powered on and produced airflow from the outlet valve at 2 Bar (25 PSI). Run hours recorded at 8424. Fitted with a 3-pin 16 Amp blue plug.

Includes:

• Jun-Air motor Model 2000-US1 (Max 10 Bar, Motor ID L11798)

Model: 4000-40M

Serial No.: 644866

Ekom DK50 2VS/M Air Compressor W/ Enclosure Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and in complete working order.

Sherwood M851 Air Compressor

This item was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition, powers on, and is fully functional.

Bambi PT24 Oil Free Compressor

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

Absolute - OF-B90-25 Oil Free Compressor Lab

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and in good working order. The unit was purchased new in June 2022 and was serviced annually by Speck & Burke until decommissioning in 2023.

Model: OF-590 25 230 50/60

Serial No.: 1132598

This item is sold on behalf of a client and falls outside our normal terms and conditions. It is non-returnable and non-refundable.

Planet-Air Silver-Line Compressor Model L-S100-50

This item was removed from a facility where it was surplus to requirement.

It powers on and is in great condition, with no visible signs of wear. The unit was tested to 6 bar and held pressure with no leaks observed. No further testing was performed.

Includes:

• Planet-Air Silver-Line Compressor
• Physical manual
• Thermo Fisher Scientific B-3689-CR (included accessory)
• 
  

Specifications:

• Max Pressure: 8 bar / 116 psi
• Minimum Operating Temperature: 0°C
• Maximum Operating Temperature: 40°C
• Duty Cycle: S3 – 50%

This item is new in stock. Please enquire for further details.

This system was removed from a university lab where it was surplus to requirements.

All modules power up but have not been tested further. We are told it was working prior to removal.

4 PCs are included, but have had their hard drives removed for GDPR reasons. The PCs have been left with he system as they may contain required Pci cards.

It is in good cosmetic condition with minor marks.

Sequenom Samsung MassARRAY Nanodispenser

SN - 31-0142-F2

Bruker Agena Bioscience

Type - MT Analyzer

SN - BA060636

Sequenom Matrix

Model - PlateMate 2X2

SN - 301-9-234

Comes with Controller - Looks never used as is still sealed

2 x Matrix ControlMate Software Discs V1.0.11

Other bits:-

APC Back-UPS R S 1000 - Powers on

Sequenom Box of old chips for volume checks

Grey Case for Matrix PlateMate Plus/PM 2X2 30ul 96 Pipetting Head (Case is empty)

2 x 5000ml Simax Glass Bottles

Wash Tank with Probe

BDH Black Container

2 x Nalgene Waste/Supply Containers

40L Feed Tank with Probe

40L Waste Tank with Probe

Tubing

Small box labelled Gasket kit with 2 x Green Gaskets inside

Pfeiffer Vacuum Compact Cold Cathode Gauge PTR25500 (Not sure if this is related)

Box labelled Sequenom Parts includes:-

Shipping bracket

Plates

Power cable

MassARRAY Nanodispenser Floppy disk SN - B1-0142-F2

Various PC cables (VGA etc.)

This item is new in stock. Please enquire for further details.

Zeiss Axiovert 200M Confocal Microscope System with LSM510 META & Multi-Laser Setup

This system was removed from a university laboratory where it was surplus to requirements.

The previous owner confirmed it was in good working condition prior to removal, though advised there may be a potential laser-related issue.

The microscope and automated stage have been briefly tested and are functioning as expected, with test slide images successfully captured. Service records show the system was last serviced by Zeiss on 16/04/2014, where the switching mirror was replaced and META calibration completed, and it was reported as fully working at that time.

The system is in good used cosmetic condition with typical signs of general use. Further testing of the confocal and laser system has not been carried out.

The system comprises the following:

• Zeiss Axiovert 200M Confocal Microscope, fitted with:
• Zeiss HBO100 Light Source (447219) with EQB100 PSU
• Zeiss 1095-490 Switching Mirror
• Zeiss 1058-431 Light Channel
• Zeiss 1005-847 Condenser NA 0.55 WD 26mm
• Märzhäuser Scan 120x100 Automated Stage (90-25-414-0000) with inserts
• Zeiss 6 Position Nosepiece
• Zeiss 1005-827 Binocular Tube
• 2 x Zeiss 1016-758 W-PI 10x/23 Eyepieces

Objectives (Zeiss):

• Plan-NEOFLUAR 10x/0.30 ∞/0.17
• Plan-NEOFLUAR 20x/0.50 ∞/0.17
• EC Plan-NEOFLUAR 40x/1.3 Oil Ph3 ∞/0.17
• Plan-APOCHROMAT 63x/1.4 Oil DIC ∞/0.17
• A-Plan 10x/0.25 Ph1 ∞/-
• Plan-NEOFLUAR 40x/1.3 Oil DIC ∞/0.17

Laser Scanning & Illumination Components:

• Zeiss LSM510 META Scan Head
• Zeiss LSM 510 Laser Module including:
• Lasos LGK 7812 ML4 (450–530nm, May 2011)
• Lasos LGK 7628-1 (633nm, June 2012)
• Lasos LGK 7786 P (543nm, August 2009)
• Lasos LGN3000 Laser Power Supply
• Zeiss ECU
• Zeiss MCU 28 Stage Controller
• Zeiss Bedienpult/WIS XY Joystick Controller
• Zeiss Remote Control

Optics & Filter System:

• Zeiss 5 Position Motorised Reflector Turret (1064-365)
• Filter Set 10 BP450-490 FT510 BP515-565
• Filter Set 15 BP546/12 FT580 LP590
• Filter Set 49 G365 FT395 BP445/50
• Zeiss DIC/Senarmont (1005-863)
• 2 x Zeiss Iris Stop Sliders (one not functioning correctly)

Environmental Control:

• PeCon Inkubator XL-3 Enclosure (one thumb screw missing)
• Heating Unit with hose
• Tempcontrol 37-2 Digital
• CO₂ Controller

Computing & Software:

• Fujitsu Siemens Celsius PC (Windows 2000)
• Keyboard, monitor & mouse
• Carl Zeiss software installed with USB license dongle
• (Note: DVD/CD drive belts require replacement)

Additional:

• Various connection cables
• Manuals and software discs

Please note: The main table shown in images is not included, though a suitable alternative may be available separately.

Nexia Scientific Environmental Test Room (Temperature Only / Low Humidity), 3 Units Available

This environmental room is being sold on behalf of an operational laboratory.

It is in excellent cosmetic condition with very little use.

The client has notified us that they are supplied fully constructed and operational on a robust mobility skid.

The professionally constructed room features the following:

• Non–flat-pack construction
• Single-phase 16A electrical supply
• Temperature-controlled operation (low humidity)
• Insulated modular room build
• Access door and internal lighting
• Control/monitoring interface
• Ideal for temperature stability and product conditioning
• Identical specification across all three rooms

Detailed specifications:

Configuration:

• Environmental test room (temperature only / low humidity)
• Working condition confirmed prior to removal
• 3 identical rooms available, price per room

Electrical:

• Single-phase, 16 amp supply
• Standard UK mains compatibility

Options (supplier-quoted):

• Delivery: £1,995
• 12-Month Warranty: £1,495
• 24-Month Warranty: £2,295
• Commission & Calibration: £1,695
• Full IQOQPQ Validation: £2,995

Pricing:

• £16,995 per room

Accessories/Included:

• Complete room structure
• Integrated temperature control
• Internal lighting and safety cut-offs
• Associated connectors/cabling

Service history:

• Details to be confirmed/provided upon request

A PDF is available for further information and specifications.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Nexia Scientific Environmental Stability Room (Temperature & Humidity), 5 Units Available

This environmental room is being sold on behalf of an operational laboratory.

It is in excellent cosmetic condition with very little use.

The client has notified us that they are supplied fully constructed and operational on a robust mobility skid.

The professionally constructed room features the following:

• Non–flat-pack construction
• Single-phase 16A electrical supply
• Integrated temperature and humidity control
• Insulated modular room build
• Access door and internal lighting
• Control/monitoring interface
• Suitable for stability and environmental testing
• Identical specification across all five rooms
• The external dimensions are not specified; please enquire (rooms are identical in specification).

Detailed specifications:

Configuration:

• Environmental test / stability room (temperature & humidity)
• Working condition confirmed prior to removal
• 5 identical rooms available, price per room

Electrical:

• Single-phase, 16 amp supply
• Standard UK mains compatibility

Options (supplier-quoted):

• Delivery: £1,995
• 12-Month Warranty: £1,995
• 24-Month Warranty: £2,995
• Commission & Calibration: £1,995
• Full IQOQPQ Validation: £4,995

Pricing:

• £24,995 per room

Accessories/Included:

• Complete room structure
• Integrated control system
• Internal lighting and safety cut-offs
• Associated connectors/cabling

A PDF is available for further information and specifications.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

LGC Douglas Scientific Waterbath Thermal Cycling Machine Soellex 2.0 Lab

This is being sold on behalf of a client. It is surplus to requirements.

The system is in good cosmetic condition and in complete working order.

The Soellex is an ultra-high-throughput endpoint polymerase chain reaction (PCR) thermal cycler that uses a 3-chamber water bath for precise and consistent temperature control. Its efficient heating system delivers rapid energy transfer to samples, ensuring uniform results across large-scale runs. The Soellex can process up to three spools of Array Tape, each containing 200 arrays in a 384-well format, allowing up to 230,400 PCR reactions in a single run.

Specifications:

• Length: 188 cm (75 3/4")
• Depth: 89 cm (35 1/8")
• Height: 201 cm (82")
• Dry Weight: 1,000 kg (2,205 lbs)
• Wet Weight: 1,295 kg (2,855 lbs)

Utilities:

Power Options:

• 240 V, single phase, 100 A (preferred)
• 400 V, three phase, 40 A

System Fluid Options:

• RO Water (preferred)
• DI Water
• Filtered Water

System Drain:

• Floor drain (preferred)

Cooling Options:

• Tap water inlet with drain outlet

Exhaust Options:

• Air extraction via 10” duct connection
• Exhaust directly into room environment

In good overall condition, with intact housing and controls.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Zeiss Filter Cube Set 489043-9901-400 Set 43 Microscope Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

Filters;

• EX BP 550/25
• FT 570
• EM BP 605/70

• Part No. 489043-9901-400-
• Module part no. 424933

Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

For use with the following:

• Axio Imager.M1
• Axio Imager.Z1
• Axio Observer.A1
• Axio Observer.D1
• Axio Observer.Z1
• Axio Observer.Z1 Cell Observer
• Axio Observer.Z1m ACR
• PALM MicroBeam Rel.4.2
• PALM MicroTweezers Rel.4.2
• PALM CombiSystem Rel. 4.2
• Axio Imager.Z1 + ApoTome
• Axio Observer.Z1 Cell Observer SD
• Axio Observer.Z1 TIRF 3
• Axio Imager.A2
• Axio Imager.D2
• Axio Imager.M2
• Axio Imager.Z2
• Axio Observer.D1 TIRF 3
• Axio Scan.Z1
• Axio Observer 3 materials
• Axio Observer 5 materials
• Axio Observer 7 materials
• Axio Observer 3
• Axio Observer 5
• Axio Observer 7
• Axio Observer 7 Cell Observer SD
• ELYRA 7
• LSM 900
• LSM 980
• Cell Observer SD
• Axioscan 7
• Lattice SIM 3
• LSM 910
• LSM 990

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

The vehicle is a non-runner and has been parked up for the last 24 months. It has been converted into a food truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

• Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

• Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Pizza oven dimensions are:

Opening is 53cm x Internal Width is 100cm x Depth is 120cm x Opening Height is 26cm.

The water urn wiring has been disconnected from the unit, as has the water bath.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Lochmaben UK

Thermo Accela UHPLC-UV System with PDA Detector, Autosampler, Pump etc Lab

This item was removed from a university laboratory where it was surplus to requirements.

The system is in very good cosmetic condition and comes with full certificates of conformity and manuals, both in physical and electronic formats.

The customer notes that the system has been well maintained.

Please note: There is no PC included.

Includes:

• Accela PDA Detector (P/N: 60057-60050, S/N: 81148)
• Accela AutoSampler (P/N: 60057-60020, S/N: 82239)
• AutoSampler Accessory Kit (P/N: 60357-62001, S/N: 3326108)
• Accela Pump (P/N: 60057-60010, S/N: 82580)
• Accela Manual and Conformity Certificates
• Bottle Tray

Accela Parts (Labelled as New):

• 2x Seal, High Pressure, GFP for Accela Pump (P/N: 00950-01-00129)
• UHP Filter Cart, 0.5µM x .062, 2µL, RoHS (P/N: 00109-99-00020)
• Rheodyne Isolation Seal (P/N: 7010-015)
• 2x Piston, Sapphire, REV1.0, Accela Pump (P/N: 00950-01-00126)
• Plunger, Replacement, 250µL Dual Syringe (P/N: F1123-020)
• 3x Seal, Pace, Peek, MS Pump LDA (P/N: 00950-01-10013)
• ATO-8897
• ATO-8896

Used Accela Parts:

• 3x Rheodyne 25µL, SS, Sample Loop, VHP (P/N: 7755-217)
• Rheodyne 5µL, SS, Sample Loop, VHP (P/N: 7755-200)
• Longer Rheodyne Sample Loop (No Part Number Available)

Other:

• Allied Telesyn AT-FS705L 10Base-T / 100Base-TX 5 Port Fast Ethernet Switch
• Relevant connecting cables
• 5x Wheaton 1000mL Bottles with assorted caps and tubing
• 1x FisherBrand 500mL Bottle

Palm Microbeam3 Laser Capture Microdissector with Zeiss Axiovert 200 Microscope

This system was removed from a university laboratory where it was surplus to requirements.

The previous owner stated that the system was in working prior to decommissioning. We recommend that it be re-commissioned by a Zeiss engineer before it is used again.

The system comprises the following:

• 1 x Zeiss Axiovert 200 Manual Inverted Microscope, fitted with:
• 1 x Zeiss HAL 100 Halogen Lamp
• 1 x Zeiss 1005-847 6-Position Condenser (H, Ph1, Ph2, Ph3, DIC, DIC)
• 1 x Zeiss Cap Mover
• 1 x Palm ST2-568-B Automated Stage (software-controlled) with 3x1.0 slide holder
• 1 x 6-Position Nosepiece fitted with objectives:
• Zeiss Fluar/Palm 5x/0.25 ∞/0.17
• Zeiss Fluar/Palm 20x/0.75 ∞/0.17
• Zeiss Plan-NEOFLUAR/Palm 100x/1.30 Oil ∞/0.17
• 1 x Zeiss 1005-827 Binocular Tube 45º/23 with pair of Carl Zeiss 1016-758 W-PI 10x/23 Eyepieces
• 1 x Zeiss 1064-364 5-Position Reflector Turret fitted with Laser, FITC, Rhod, and 2 empty positions
• 1 x Zeiss AxioCam ICc1 Camera

• Illumination and Accessories:
• 1 x Zeiss HBO100 Mercury Lamp with EQB100 PSU
• 1 x Ludl Filter Wheel FW 6 POS W/SH with Ludl MAC5000 Power Base

• Laser Capture Components:
• 1 x Palm Microbeam 3 System
• 1 x Palm Joystick Controller
• 1 x Palm Footswitch
• 1 x Zeiss CryLas Laser Controller
• 1 x Zeiss System Control Box

• Control & Software:
• 1 x HP Z800 PC running Windows 7, pre-installed with:
• Zeiss AxioVision 4.8.2
• Zeiss licence dongle included
• Keyboard, monitor, and mouse included

• Additional Items:
• Original Zeiss AxioVision software disc
• Assorted manuals and spare parts
• All necessary connection cables

Olympus IX-70 // Fluoview FV-500 Confocal Microscope System

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on, and the basic microscope functions have been tested successfully. All optical and mechanical components appear to operate as expected, with the system in good overall cosmetic condition, showing signs of general use. Full FV500 operation will require a compatible PC running the appropriate control software.

The system consists of:

Olympus IX-70 Inverted Microscope fitted with:

• Olympus IX-ILL 100 LH Transmitted Illumination Column
• Olympus IX-LWPO Polarizer
• Olympus IX-LWUCD Phase/DIC Condenser
• Olympus IX-SFR Mechanical Stage
• Olympus 6 Position Nosepiece
• Olympus FV5-DICT DIC Slider
• Olympus IX-AN Analyzer
• Olympus IX-RFAC Cube Turret fitted with 3 filter cubes:
• Olympus U-MNIBA2
• Olympus U-MWG2
• U-N41024 CY5 LP
• Olympus U-BI90 Binocular Tube 90
• Olympus WH10X-H/22 Eyepiece (appears to be missing outer ring)
• Olympus WH10X/22 Eyepiece
• Olympus Liquid Light Guide with LG-PS2 and FV5-TD
• Olympus U-ULS100HG Mercury/Fluorescence Lamp with U-RFL-T Power Supply
• Olympus FV5-74-2 Fluoview FV500 Controller (working condition unknown)
• Olympus FV5-ZM Scanning Head

Included Objectives:

• Olympus UPlanApo 10x/0.40 ∞/0.17
• Olympus UPlanApo 20x/0.70 ∞/0.17
• Olympus UPlanApo 40x/0.90 WLSM ∞/0.17
• Olympus UPlanApo 60x/1.40 Oil ∞/0.17
• Olympus UPlanApo 100x/1.35 Oil Iris ∞/0.17

Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

• 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
• Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
• Reflector modules: DAPI, FITC, TRITC, empty

• 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
• Position 1: empty
• Position 2: 424228-9060 0.05T Neutral density filter 0.05
• Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
• Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
• Position 5: empty

• 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

• 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

• 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

• 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

• 1 x Camera adapter 60N-C 2/3" 0.5x (426112)

• 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

• 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

• Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

• 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

EnvisionTEC 3D-Bioplotter Starter Series – 3D Bioprinter System with High Temperature Heads & Software Suite

This equipment is being offered on behalf of a client and originates from surplus laboratory assets.

The system is an EnvisionTEC 3D-Bioplotter Starter Series, a precision 3D bioprinting platform designed for research and advanced material deposition applications. The 3D-Bioplotter range is widely used in tissue engineering, biomaterials research, regenerative medicine, and scaffold fabrication, supporting controlled extrusion of hydrogels, thermoplastics, and other biomaterials.

The client advises that the system is in very good working condition and has been serviced in-house on a yearly basis.

System Overview

The EnvisionTEC 3D-Bioplotter Starter Series is a computer-controlled extrusion-based bioprinting system designed for precise, layer-by-layer fabrication of three-dimensional structures. The platform supports interchangeable print heads and temperature-controlled material deposition, enabling processing of a wide range of biomaterials including thermoplastics and bio-inks.

The system is supplied complete with dedicated control and slicing software and a PC workstation, forming a ready-to-deploy research platform.

• EnvisionTEC 3D-Bioplotter – Starter Series
• Manufacturer: EnvisionTEC Inc.
• System Type: Extrusion-based 3D Bioprinter

Dedicated PC Workstation (included)

Software:

• Perfactory Software Suite 3.2 (Slicing Software)
• VisualMachines (Printer Control Software)

Included Equipment & Accessories

Complete accessory package including:

• 2 × High Temperature Print Heads
• Tip Calibration System
• Automated Nozzle Cleaning System
• Multiple nozzles with varying diameters
• Thermoplastic material nozzle
• Syringe connectors and adapters (including additional spare connectors)
• Different sizes of syringes
• Demo materials
• User manual
• All hardware and software required to control and operate the printer are included in the sale.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Agilent 6530 Accurate-Mass Q-TOF LC/MS System with Agilent 1290 Infinity LC Stack (5 Modules)

This equipment is being offered on behalf of a client and originates from surplus laboratory assets removed from a working laboratory during site decommissioning and closure.

The system comprises an Agilent 6530 Accurate-Mass Q-TOF LC/MS coupled with five Agilent 1290 Infinity units, forming a complete LC/MS platform suitable for high-resolution accurate-mass analysis and UHPLC separations. The client has supplied extensive photographs and videos of the full configuration, including documentation and supporting accessories.

It was reportedly barely used, and the client has since tested the system, confirming that all components power on and the system appears to operate as expected.

The client would prefer to sell the complete system as a whole, however may consider splitting the system if commercially realistic terms are agreed.

Videos of the system in operation are available on request.

Service History

• Service records: Not available (beyond Declaration of Conformity)
• Last known status: Working prior to lab closure
• Current status: Powers on and appears operational following client testing

System Configuration (as provided)

• Agilent 6530 Accurate-Mass Q-TOF LC/MS
• Agilent 1290 Infinity Units (5 total):
• Binary Pump
• Thermostatted Column Compartment (TCC)
• Autosampler
• Thermostat
• Isocratic Pump
• Software / PC
• A dedicated PC is included, supplied pre-installed with MassHunter software and additional supporting packages, as documented in the client’s media pack.
• Spares / Accessories

The client advises there are over £10,000 of unused/new spares and accessories, many of which are documented within the supplied folder. These may be included in the sale subject to an appropriate offer.

Packaging / Transport

Collection is preferred by the buyer. The client can assist with packaging if required.

Note: The flightcase shown in images is not included, however a wood-lined cardboard box is available and may be suitable for transporting the LC stack.

Collection Location

Sheffield, UK

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.