Hiden Isochema Intelligent Gravimetric Analist+ DSMS Mass spec

This system was removed from a university where it was surplus to requirement.

All units power up and are in good cosmetic condition, we are unable to test the system further at our facility.

The lab confirmed the system was working prior to removal.

The system includes the following:

Hiden Gravimetric Gas sorption analyser

SN - HALIGA157

Powers on, PC has MASsoft Professional Software installed.

Hiden Analytical DSMS Dynamic Sampling Mass Spectrometer

Model - HAS-301-414 PL

SN/Ref - WR 12971

Hiden Analytical HAL301/3F

SN - 3F2R-0/A/81447/E

Edwards 1.5 Pump

Model - E2M1.5

Code - A371-32-919

SN - 086277133

Vacuubrand Diaphragm Vacuum Pump

Model - MD1

SN - 31507705

Hiden Analytical Furnace Power Controller

Powers on

Parts fitted:

Hiden Analytical Model - HAS037001

SN - 314001

Hiden Analytical Model - HA-092-0010

SN - 310-003

Pfeiffer Vacuum

Model - TC600

SN - 0829014257

Hiden Analytica Cryo Furnace Circulation Unit

Model - HAS0221248

SN - 314-001

Has 2 Vacuubrand Diaphragm Vacuum Pumps fitted and one spare

Model - MD1

PC/Accessories:

Dell Vostro 200

Dell 19" Monitor & Keyboard

IBM Mouse

All Powers on

Software discs:

Hiden IGA Systems Software CD V2.148

Hiden Analytical Software Suite v4.25

Software USB - Has above software saved on usb

Other accessories included:

Blue case of screws & copper gaskets

2 x Dilvac Dewar Flask & Containers 2 x 35cm

1 x Dilvac Flask 12 x 23cm

Small Furnace - Model HAS0221267 - Unable to test

Manuals:

IGA Systems manual

Hiden Vacuum Manuals

Hiden MASsoft professional manual set

This Edwards Vacuum Carbon Coater E306 was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test it further at our facility.

It is made up of the following modules;

Agar Thickness Monitor

Edwards 8 Vacuum Pump

Keithley 169 Multimeter

Edwards Penning 505

Yokogawa Cell Voyager CV1000 System w/ PC & Software Lab

This system was removed from a university lab where it was surplus to requirements.

All units that form the system are in good cosmetic condition and powered up.

The system appears to be in full working order, we were able to obtain a live feed from the camera - See end of the slideshow.

The PC Has the following software installed:

CV1000 Software 1.06.06

With the use of the software we can control the following on the Main unit:

Open/Close Tray

Adjust Temperature

Adjust Plate Configuration

Change Objective

Adjust Camera Position

Included are;

Yokogawa Cell Voyager CV1000

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400006

Yokogawa Cell Voyager CV1000 Utility Box

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400012

PC Set Up.

Dell Flat Panel Monitor P2719H

Serial#: CN-09PR6R-WS200-89C-367S-A01

Dell Precision T1700 PC

Serial#: F2VM202

Dell Keyboard & Mouse

PC Has the following software installed:

CV1000 Software 1.06.06

Objectives in main unit:

UPLSApo10x2

UPLSApo20x

UPLSApo20x0

UPLFLN40x0

UPLSApo40x2

UPLSApo60x0

Malvern Instruments NanoSight NS500 Size and Concentration Analyser

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab informed us that currently it is operating well, however they were getting an 'autofocus error' when they request the software to auto-focus. Because manual focus is also an option, it wasn't a huge issue.

Includes;

1x NanoSight Software CD NTA 2.1

1x NanoSight Software CD NTA 2.1 Operating Manual

1x NanoSight NS500 Operating Manual

1x NanoSight NS500 Gaskets (pack of 5)

This Illumina HiSeq 1000 Genome Sequencing System was removed from a university lab where it was surplus to requirements.

This system powers on and is in good cosmetic condition, unable to be tested further at our facility.

The lab confirmed it was working prior to collection.

The system comes complete with all necessary cables integrated.

International Metrology Systems MS Impact Coordinate Measuring Machine

This was removed from a university lab where it was surplus to requirements.

We were unable to test it at our facility but the lab confirmed that it was working prior to removal.

It has a Renishaw Probe Head Controller PHC10-2 and Virtual-DMIS Version 3.2 and Version 4.0 software discs which run it.

This Edwards Vacuum Carbon Coater E306 was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test it further at our facility.

It is made up of the following modules;

Edwards 8 Vacuum Pump

Parvalux SD 1C

Edwards AGD

This Olympus BX51 WIF Fluorescence Microscope System was removed from a university lab where it was surplus to requirements.

The System unfortunately is largely untested as the lab was unable to part with the PC and software. They implied that it was in working order prior to having the PC removed as it was just surplus to requirements, but there are some parts missing.

Overall it is in good cosmetic condition but has general marks from use.

Details;

1 x Olympus Microscope

Model - BX51WIF

2 x Olympus Eye pieces - WH15X/14

2 x Objectives:-

Olympus LUMPlanFI/IR 40x/0.80 W ∞/0

Olympus Plan N 4x/0.10 ∞/-/FN22

Olympus Lamp

Model U-LH100IR

SN - 6F24822

There is no power supply for the lamp, we used one from another item (not included) to test the light which was working, tested with one of our slides and was able to focus.

Q Imaging optiMOS sCMOS camera

Cooled Mono 16 Bit

SN - Q41501

Lens - Olympus U-CMAD3/Olympus U-TV1X-2

Filter - HQ535/50 M 203616

There is no power supply cable for the camera.

Newport RG Breadboard Optics Table

Model - VH3036W-OPT

Dimensions - D76 W90 H80cm

Faraday Cage Dimensions - D78 W88 H90cm

The cage is in reasonable condition but has a few holes.

Table & Cage combined dimensions - D77 W90 H170cm

Scientifica Stage/Platform

Dimensions - D34.5 W60.5 H20.5cm

Power supply for Patch Clamp Micromanipulation System:-

Burleigh PCS-PS60

Powers on

2 x Burleigh PCS 5000 Series Controllers

SN - 0011431 & 0011420

2 x Burleigh PCS 5000 Series Micromanipulators

Burleigh TS - 5000 - 150

Other parts/accessories include:-

Unknown Part SN - 1270

Prior part

Hi-lo Nitrogen 10 Bar gas Regulator

Various small bits including crocodile clips and tubing

PacBio Sequel II Sequencing System Lab

This unit is being sold on behalf of an operational university laboratory.

The system is in good cosmetic condition and full working order, it received a Maintenance check by PacBio on:

13/04/2023.

The full Maintenance report is available on request.

The unit can be collected from the client in New York, but we may be able to discuss logistics around domestic US delivery at the point of sale.

Also included are digital copies of the following:

• Installation Summary - 3/3/2020
• Preventative Maintenance Summary - 10/5/2021

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge

This was removed from a laboratory where it was surplus to requirements.

The system has not been tested as it has been disassembled to some degree.

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge

This was removed from a laboratory where it was surplus to requirements.

The system has not been tested as it has been disassembled to some degree.

This Becton Dickinson BD LSRFortessa was removed from a university lab where it was surplus to requirements.

The lab informed us it was in full working order prior to removal.

Included are;

1x BD LSRFortessa Model No 649225B1

The unit powers on and is in good cosmetic condition. The fans are working and air can be felt blowing away from the unit.

1x ONEAC Power supply:

Model PCM1500U-CPBB

The unit powers the BD LSRFortessa unit. It is in good cosmetic condition. There are some light tape marks from general use.

1x BD High throughput Sampler:

Cat No. 647701

The unit powers on and is in good cosmetic condition.

1x BD FACSflow Supply System:

Ref, 349227

The unit powers on and is in good cosmetic condition.

1x Nalgene Bottle:

Volume, 2L

The unit is in good cosmetic condition.

1x BD Closed Waste Container:

The unit is in good cosmetic condition.

Randox RX Daytona+ Plus Chemistry Analyser

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further as we do not have the required software. The lamp inside is in working order.

It is in good cosmetic condition with marks from use.

It is supplied with a selection of plastic containers for waste and wash solution.

Thermo Scientific MAXQ 8000 SHKE800-1CE Incubated Stackable Shakers Triple Stack

This stack was removed from a university lab where it was surplus to requirements.

All three incubators have been tested and are in full working order. They will require calibration against your equipment upon delivery.

They are in excellent cosmetic condition with minor marks from use.

GE Healthcare / Cytiva Xuri Cell Expansion System W25

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility due to not having the required software.

HP Elite desktop PC - No operating system or software included. We have left the PC with the system in case it has relevant hardware installed.

This system comprises the following:

Cytiva XuriTM Cell Expansion System W25 base unit

Cytiva Xuri Cell Expansion W25 Pump

Cytiva Xuri Cell Expansion W25 CBCU

HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard. TH

Cytiva Filter Heater

GE Healthcare / Cytiva Xuri Cell Expansion System W25

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility due to not having the required software.

HP Elite desktop PC - No operating system or software included. The PC was left with the system as it may have relevant hardware.

This system was Calibrated on 07.12.23

The Xuri Cell Expansion System comprises the following components:

Xuri Cell Expansion System W25 main unit

Serial No. 2648232. Year 2020

Xuri Cell Expansion System W25 CBCU full unit

Serial No. 2635824 Year 2020

Xuri Cell Expansion W25 Pump

Serial No. 2644380. Year 2020

Xuri Filter Heater

Code No. 29083659

HP Elitedesk desktop PC with no operating system or software

Serial No. CZ009CNKH

HP Keyboard model KU-1156

HP mouse

Part No. 672562-001

Lenovo ThinkVision Monitor

Serial No. V1BWY98

Netgear 8-port gigabit ethernet switch

Serial No. 5UR10650009AB

Also included:

3 x lengths of pump tubing with connecting ends

2 x low voltage power leads

1 x Netgear 18v power adapter

Cytiva Xuri Cell Expansion System W25 Lab

This system was removed from a university lab where it was surplus to requirement.

All units are in good cosmetic condition with the Xuri Cell Expansion System W25 base unit powering on. All units have been powered on using test cables required to connect the Cytiva Xuri Cell Expansion W25 Pump and Cytiva Xuri Cell Expansion W25 CBCU.

These are test cables and are not included in the listing.

This system comprises the following:

Cytiva XuriTM Cell Expansion System W25 base unit

Cytiva Xuri Cell Expansion W25 Pump

Cytiva Xuri Cell Expansion W25 CBCU

HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard . There is no software installed.

Cytiva Filter Heater

TTP LabTech Mosquito LCP Automated Liquid Handling

This item was removed from a university lab where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was working order prior to removal.

Specifications:

• Model: Mosquito LCP
• Serial No.: LCP-601

Nano ITC Isothermal Titration Calorimeter

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The lab confirmed this was in good working order prior to removal.

Includes the original manual and test disk.

Specifications:

• Model: Nano ITC
• S/N: L10161

This item is new in stock. Please enquire for further details.

Cytiva Xuri Cell Expansion System W25 Lab

This system was removed from a university lab where it was surplus to requirement.

All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility.

The PC has no software but is included as it may have relevant hardware.

This system comprises the following:

Cytiva XuriTM Cell Expansion System W25 base unit

Cytiva Xuri Cell Expansion W25 Pump

Cytiva Xuri Cell Expansion W25 CBCU

Dell Vostro PC, NEC MultiSync LCD 1970 Monitor

Cytiva Xuri Cell Expansion System W25 Lab

This system was removed from a university lab where it was surplus to requirement.

All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility.

The PC has no software but is included as it may have relevant hardware.

This system comprises the following:

Cytiva XuriTM Cell Expansion System W25 base unit

Cytiva Xuri Cell Expansion W25 Pump

Cytiva Xuri Cell Expansion W25 CBCU

Dell Vostro PC, LG Flatron L1915S Monitor

Philips XL30SEM Environmental Scanning Electron Microscope ESEM

This item was removed from a university where it was surplus to requirement.

The system was in working order about 5 years ago, but has since required a new PC and has not been used.

There is no PC or Software included with this system.

It is in good cosmetic condition, with minor marks from use.

Item supplied with:

• BOC EDWARDS Turbomolecular Pump.              

Type: B753-01-991.                                            

Serial No: 016917679.                                        

• Sony Video Graphic Printer.                               

Type: UP-895CE.                                              

Serial No: 58728.

• High Temperature Stage Controller.                   

Type: 300-430-000.                                         

Serial No: 020501.                                            

• Philips Manual User Interface.

Type: 20445-C.

Serial No: 014203.

• NEC Multisync Monitor

Type: LCD1850E

Serial No: 202107890

• Caron Model: 2050W

Serial No: 091701-2915-03.

• Thermoelectric Stage Controller.

Type: 300-058-000.

Serial No: 011013.

Edwards Auto 306 Thermal Evaporator Coating System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. The system boots up and the internal pump runs.

Item contains:

Edwards RV12 Pump

Serial#: 006774738

Edwards Oil Mist Filter EMF10

Code#: A223 04 198

Edwards PV25EKA

Serial#: 006693767

Edwards B3060424A

Serial#: 006739951

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80.

The system was removed from a University Lab as surplus to requirements.

This system powers up and is in good cosmetic condition, we are unable to test it further at our facility.

Mackey Bowley Diffusion Bonder.

Serial No. S9638/91

Chamber Dimensions: L 58cm x W 38cm x H 38cm.

Bed Dimensions: L 80cm x W50cm.

Fitted with: Oerlikon Leybold Vacuum Thermvac. Type: TTR91. Serial No. 230035.

Edwards Speedivalve.

Edwards Speedivac Oil Defussion Pump. Model: 403A. Serial No. 1981.

Eurotherm Controller Type 815 & 818 Installation Manual.

Stenhoj Hydraulik 60 Ton.

Type: 500414.

Serial No. 63153.

Model Year: 1991.

Cheltenham Induction Heating Ltd.

Type: TRI 12.

Serial No. TRI2017.

Instron Control Panel.

Model: 1342.

Serial No. H2003.

Fitted with: Edwards Pirani 11 & Display One Single Channel Vacuum Display.

Display One Single Channel Vacuum Display Manual.

Edwards High Vacuum Pump.

Model: E2M 80.

Serial No. 995.

Comes with: Edwards Backing Roughing Valve. Model: BRV25PK. Serial No. 02011 & Instruction Manual.

Qiagen QIAsymphony Nucleic Acid Purification System Lab

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and full working order.

It is available for collection from London, UK, but we may be able to offer shipping for an additional fee.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Qiagen Pyromark Q96 ID System Lab

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and full working order.

It is available for collection from London, UK, but we may be able to offer shipping for an additional fee.



The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This Perkin Elmer Envision 2103 Plate Reader Multilabel Plate Reader is being sold on behalf of a client. It is surplus to requirements.

The Perkin Elmer 2103 Plate Reader Multilabel Plate Reader is a fast, sensitive, and versatile benchtop reader that delivers optimized performance. It's a dynamic filter-based reader for Multi-label reads.

Included with it are;

Read technologies.           Time-Resolved Fluorescence

                                               Fluorimeter Top and Bottom

                                               Luminescence

                                               US Luminescence

                                               Fluorescence Polarisation

                                               Absorbance

                                               Alpha Screen

Stacker

Barcode readers

Windows 10 PC

3 months UK warranty

It is fully refurbished and calibrated to factory specifications.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.



Siemens Immulite 2000 Immunoassay System

This was removed from a university lab where it was surplus to requirements.

The item powers on and runs through initialisation steps, the built-in computer boots up and has Immulite 2000 Version 6.9 Software installed. The touchscreen works.

It is in good cosmetic condition with minor marks.

We powered it with the provided UPS.

Included with it are;

AMETEK Powervar

Model - ACDEF3000-22

PN - 17302-02R

Accessories/Consumables:-

4 x Packs of Reaction Tubes (1000 per pack) REF - LRXT

12 x Sample Racks

Immulite 2000/2000 XPi System Software/Release Notes V.6.7

Tool box

This Gasmet FT-IR Gas Analyser Spectrometer Model - DX4030 was removed from a university lab where it was surplus to requirement.

The unit powers up and we have run a hardware check.

Acceptable values for hardware parameters:

Cell temp: close to ambient temp

Cell pressure: close to ambient pressure

Source intensity: >50% (original =100%) - Unit showed 89%

Interf height: >3V when cell is filled with zero gas (original approx 5.5V - Unit showed 3.57V

Interf center: 2000...3000 point - unit showed 2483 points

Electronic temp: 0...50ºC - unit showed 21.43

Detector temp: -37ºC - Unit showed -37.08ºC

Ext detector temp: +25ºC - Unit showed 19.82ºC

Nothing seems out on the acceptable values for the hardware parameters.

We then ran the Zero Calibration check after flushing the air for 3 minutes.

The unit showed - Min: 115.0000 Max: 58825.0000

Acceptable values for Maximum background spectrum are >40 000 or >70% of original.

The system is in good cosmetic condition but has some minor marks from use.

It comes in Hardigg Storm Case with:-

2 x Gasmet Battery Units

Gasmet Software CD

Quantitech Dongle

Gasmet Dongle

Gasmet DX4030 Quick Reference Cards

2 x Black carry cases

Waters NanoACQUITY UPC2 UPLC Acquity Chromatography System Lab

This system was removed from a university where it was surplus to requirement.

Both units are in reasonably good cosmetic condition and power on, we are unable to test them further at our facility.

We have been informed by the lab that the system was operational when last powered on.

System comprises:

Waters Sampler Manager

S/N: L08NPS 488M

Waters Binary Sampler Manager

S/N: M08NPB 530N

LTE Touch-Clave K150e Autoclave Lab

This system comes from an operational lab, where it is now surplus to requirements.

The client has confirmed it was in full working order when last used.

Includes full service history with the most recent visit in 2022.

Further information regarding the item is available on request.

This system is available for collection from Falkirk, Scotland.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Hamilton Microlab Star Liquid Handler Workstation

This system was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition, with some screws missing from the outer panels and one side panel replaced with a shorter piece of plexiglass. Additionally, 2/5 legs are missing their rubber footpads.

The system could not be tested further due to the absence of a PC w/ relevant control system.

The previous client has stated it was in working order prior to removal.

Included:

• 5 x 24-Tube Holder Racks (Part No. 173400/02)
• 3 x 5-Plate Holder Racks (Part No. 182090/02)
• 1 x 5-Set Tip Carrier Rack (Part No. 182085/03)
• 1 x Data Cable

Specifications:

• Model: Microlab Star
• Serial No.: 1015
• Part No.: 173 009/80

Applied Biosystems QuantStudio 12K Flex Accufill System

This was removed from a university lab where it was surplus to requirements.

The powers up but has not been tested further at our facility. The lab confirmed that it was in working order before it was put into storage.

It is in excellent cosmetic condition with marks from use.

Included with it are;

1x Box of Open Array 384 well sample plates (opened)

Part no. 4406947

10Pk

The plates are still inside a sealed bag and are in good cosmetic condition.

1x Open Array Acufill User guide:

The unit is in good cosmetic condition and appears to be complete. 

Cables:

2x USB A to USB B cables:

The units are in good cosmetic condition.

1x Blue ethernet cable:

REV C 4379889

Hamilton Microlab Star Liquid Handler System

This system was removed from a university lab where it was surplus to requirements.

The system powers on and is in excellent cosmetic condition.

According to the previous owner, the system is fully operational but was sold due to lack of use and space constraints.

They also notified us that it was retrofitted with a 96well head just a few years ago.

This item was last serviced in March 2023.

Model: Microlab Star

Serial No.: 1238

Included Components:

• ONEAC Power Supply Unit (PSU)
• Model: MCU500
• Serial No.: W05/00416/3

• Microlab Star Pump Unit P
• Part No.: 186375/01
• Serial No.: 1057

• CO-RE Tips:
• (10 Boxes) x 12 x 480 50μl filter tips (Pink Label)
• REF: 235979, LOT: 7143772, GTIN: 07630032624023, Expiration Date: 2024-10-28
• (1 Box) x 8 x 480 High Volume Tips (White Label)
• REF: 235939, LOT: 4120811, GTIN: 07630032623910, Expiration Date: 2024-04-28
• (12 Boxes) x 480 Standard Volume Tips (Yellow Label)
• REF: 235937, LOT: 4148305, GTIN: 07630032623880, Expiration Date: 2024-10-28

• Software: Hamilton Microlab STAR Venus Four Base Package 4.5 (USB Drive)

• Additional Accessories:
• 13 x Mixed Plate Carriers

This system was removed from a lab as it was no longer required.

It was in full working order prior to removal from the lab.

An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber.

Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again.

Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II.

The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k.

We have not removed any parts from the system whatsoever.

Epredia HM525 NX UV Cryostat

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order (digital thermometer not included).

It is in excellent cosmetic condition with minor marks.

BMG Labtech SPECTROstar Omega Microplate Reader System

This was removed from a university lab where it was surplus to requirements.

The system powers up and communicates with the PC.

It has the Omega 5.70 R2 Software installed, along with MARS software, and the calibration software for the included calibration kit.

It is in excellent cosmetic condition and we are told it was hardly used.

BMG Labtech SPECTROstar Omega

Model: SPECTROstar OMEGA

Serial#: 415-0417

BMG Labtech User Manual for Microplate Reader

within this manual are:

Certificate of Calibration that's valid until 2024-08-18

Certificate of Calibration and Traceability issues on 2022-08-17

BMG Labtech EV-Plate

Serial#: 681-0263

This box contains:

Boley Dust Blower - 511234

BMG EV-Plate USB

BMG EV-Plate

Dell Optiplex 7010

Model: OPTIPLEX 7010

Serial#: G3BNS12

With Mouse, Keyboard & Monitor.

BD Becton Dickinson LSR II Flow Cytometer

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further without a PC and software. The lab informed us when it was last used a few years ago, it was still working.

The unit is in overall good cosmetic condition with marks from use. There is a crack in the front and the right-hand cover and the left-hand door doesn't close fully.

2 x One AC

Model - CBS2120

PN - 011-526

SN - 0129 - 6308/0129-6304

Becton Dickinson Closed Waste Container

Alloy Products Corp 316L Waste Container (Lid doesn't fit)

SN - 115443-007

Table not included.

Millipore Mobius FlexReady System CL-2 POD - MPODPILOT - MBSCB002D

This was removed from a university lab where it was surplus to requirements.

Millipore Mobius FlexReady System CL-2 POD Cart with Drawer

Model: MPODPILOT

Cat#: MBSCB002D

Serial#: F4DA03789

Year: 2014

The unit is in excellent cosmetic condition but has not been tested.

Illumina MiSeq Benchtop Gene Sequencing System Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks from use.

Operating Conditions: 19°C to 25°C (66°F to 77°F).

The system also includes:

1 x Logitech Wireless Keyboard & Mouse.

8 x Used MiSeq Flow Cells in containers.

1 x 96 Well Plate.

1 x Spare FSE Fluidics Kit 15013841S.

7 x HiSeq Flowcell Gaskets 15011631.

1 x Ultra-Low Universal Lid.

1 x Illumina GenomeStudio v1.7 Software disc.

Brooks Life Sciences IntelliXCap Automated Screw Cap Decapper/Recapper 48-format

This item was removed from the university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility, but it has been confirmed that it was working prior to removal.

Includes the following:

• FluidX Scope USB Reader

PN - FLX-20-1003

SN - 1003-0220-0076

Powers on via USB

• Manuals

2 x boxes of tubes (96 tubes per rack) 2D Coded (size not specified)

One box is full the other has around half of the tubes left

• FluidX Perception HD Barcoded Rack Reader

PN - 20-4018

SN - 4018-0320-0096

Powers on via USB

Nikon Eclipse Ni Microscope With Infinity 3 Camera Lab

This system was removed from a university where it was surplus to requirement.

The microscope is in good cosmetic condition and full working order.

It is fully operational with both software installed on the included PC.

Includes the following:

HP Desktop PC with Windows 10.

Software installed:

• Lumenera Infinity Analyze 7.1.1.66 imaging software.
• And MicroManger 2.03.

Infinity 3 camera with power supply cable.

Objectives:

• Nikon Microscope Objective - Plan Fluor 10X/0.30 Ph1 DLL ∞/0.17 WD 16.0
• Nikon Microscope Objective Plan Fluor 20X/0.50 DIC M/N2 ∞/0.17 WD 2.1
• Nikon Microscope Objective Plan Fluor 40X/0.75 Ph2 DLL ∞/0.17 WD 0.72

Eyepieces:

• 2 x Nikon C-W10xB/22

Agilent xCELLigence SP Real-Time Cell Analyser w/ Software Lab

This system is being sold on behalf of an operational laboratory.

It is in good cosmetic condition and in full working order.

Required software included.

It is available for collection from Dublin, Ireland, but we may be able to offer shipping for an additional fee.



The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.