Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

Shimadzu PSSM-8 Peptide Synthesizer w/ Memory Key, System Disk & Accessories Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition internally and externally.

It powers with the arm moving in the X/Y Axis using the onboard control panel, we are unable to test it further at our facility.

Included are the following:

Shimadzu PSSM-8 Peptide Synthesizer

Model: PSSM-8

Serial#: 310059

PSSM-8 Memory Card

Part#: 292-05230

PSSM-8 System Disk

Part#: 292-05108

Shimadzu BMD-1 Memory Card Drive

Model: BMD-1

Serial#: 310059

PSSM-C8 Cleavage Purge Unit

Shimadzu Needle

Part#: C 228-20243-94

Millex-LS syringe Driven Filter Unit

Part#: SLLS 025 NS

Shimadzu PSSM-8 Instructional Manual

This Pall GeneDisc Cycler Real-Time PCR Platform for Pa was removed from a university lab where it was surplus to requirements.

The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility.

The item carried out self-checks on start-up.

Included with the item:

Delta Electronics 12-volt Screen Power Supply

This Oxford Instruments OptistatDN Nitrogen Bath Cryostats from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition, but due to the nature of the item we are unable to test it.

This DVS Water Vapor Sorption Analyzer System was removed from a university lab where it was surplus to requirements.

The system powers on and is in good cosmetic condition. The system was tested with a digital thermometer (not included), but has not been tested further.

System includes:

CAHN DVS-1

CAHN Digital Recording Balance D-200

DVS Surface Measurement Systems

Wheaton 6-Tier Roller Apparatus Cat No 348970CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver.

It is in good cosmetic condition with minor marks

Waters 2424 ELS Detector and Additional Thar Components

This system was removed from a university laboratory where it was surplus to requirements.

All items power on and are in varying cosmetic conditions as described below, though no further testing has been conducted.

Components:

• Waters 2424 ELS Detector
• Condition: Good, with some wear and a couple of rusty spots where the Fluid Delivery Module sits (likely a common issue)
• Model: 2424
• Serial No.: E10ELS
• Waters 2998 Photodiode Array Detector
• Condition: Good, with minimal wear
• Model: 2998
• Serial No.: M08998
• Thar Automated Back Pressure Regulator - SuperPure Discovery Series
• Condition: Good, with minimal wear
• Model: ABPR-20
• Serial No.: 5631-3
• Thar Model 06298
• Condition: Good, with minimal wear
• Model: 06298
• Serial No.: 6166-5
• Thar Fraction Collection - SuperPure Discovery Series
• Condition: Good, with minimal wear and a few stains that could not be removed
• Model: N/A
• Serial No.: 5YY9-3
• Thar Fluid Delivery Module - SuperPure Discovery Series
• Condition: Fair, with some wear and rust on the right side
• Model: FDM10
• Serial No.: 5350-2
• Thar SFC Column Oven
• Condition: Good, with minimal wear
• Model: N/A
• Serial No.: SYS S.N. 6281
• Thar 840 Autosampler
• Condition: Good, with minimal wear and a few stains that could not be removed
• Model: 840
• Serial No.: 70110

Atas GL Focus Robotic Sample Processor System

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered on, we are unable to test further at our facility.

The system comprises:

1x ThermoQuest Finnigan Polaris turbo pump controller

1x GCQ Gas chromatograph

Serial#: 950208

1x GCQ Mass Spectrometer

Serial#: 200065

Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab

This enclosure was removed from a university where it was surplus to requirement.

This listing is the enclosure only and does not include the tables it sits on. Refer to the red highlight featured on the diagram.

It originally housed a Thermo Scientific™ Spinnaker™ Microplate Robot System which is not included.

The measurements for the assembled enclosure are as follows:

Length x 448cm

Width x 152cm

Height x 118cm

This item includes various brackets and fixings as seen, but we are unable to confirm if all the required items are included.

Edinburgh Instruments Time-Correlated Single Photon Counting System

This system was removed from a university lab where it was surplus to requirements.

Although all units successfully powered on, we cannot test it completely at our facility.

Condition varies as stated below each item.

The system includes the following components:

Edinburgh Instruments Spectrometer System

Serial#: 178

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller & PC with Software. The following tests were conducted:

1. Excitation Mono Successfully Initialised

2. Emission1 Mono Successfully Initialised

3. Excitation Polariser Successfully Initialised

4. Emission1 Polariser Successfully Initialised

5. Sample Holder Temperature Successfully Read

6. nF Iris did not initialise (nF Iris Cable present but unable to find port)

7. TAC Range & Scaler Successfully Initialised

All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device.

Additionally, the system includes:

Edinburgh Instruments Nanosecond Flashlamp Head

Model: nF900

Serial#: 095

Mfd: 03/2000

The item is in good cosmetic condition and pairs successfully with the Spectrometer System.

Edinburgh Instruments nF900 Controller

Model: nF900

Serial#: 092

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Edinburgh Instruments CD900 Controller

Model: CD900

Serial#: 112

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard & Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

CTI Cryogenics Cryo Torr 8 High Vacuum Pump w/ 8001 Controller & SCW Compressor

This was removed from a university lab where it was surplus to requirements.

The Cryo pump is in excellent cosmetic condition but the rest of the system is in good to reasonable condition. It was in full working order when last used.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System

This system was removed from a university lab where it was surplus to requirements.

The microscope is in working order, but we have not tested the laser due to safety restrictions at our site.

There are no objectives fitted.

Items included are:

-Zeiss LSM Control S/N- 000260

-Hal 100 Lamp

-Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07

-Zeiss HBO 100W

-Zeiss HBO 100W/2

-Zeiss Lasermodul UV

-Fujitsu Siemans mouse

-Relevant manuals and guides

-Connection cables

-Comms PCi Cards & Dongle (non USB)

Radleys 20 Litre Jacketed Glass Reactor Vessel with IKA Stirrer, Accessories on Stand

This system was removed from a university lab where it was surplus to requirement.

All components are in good cosmetic condition, although the inner glass surface is cloudy. There are no breaks or cracks in any of the glassware.

The IKA stirrer powers on and initiates paddle rotation. Adjusting the speed to its maximum setting of 10, the stirrer runs smoothly with only a little vibration.

Included;

1 x Radleys 20 litre jacketed glass reaction vessel with 4-port glass lid (Vessel 28cm diameter x 60cm height). Neck opening 22cm

1 x IKA Werke RW16 Basic B S2 stirrer Serial No. 01554824

1 x 15cm diameter paddle with 100cm shaft

1 x thermometer probe

1 x Radleys wheeled stand with vessel clamps 48 x 48 x 112cm (l x w x h) with 150cm stirrer support pole

2 x 2 meter lengths of M30 insulated hose with metal inner (20mm ID, 56mm OD)

1 x M30 splitter valve

Priorclave Compact 60 Floorstanding Autoclave PS/MID/C60

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

The previous client has notified us that it has minimal use prior to removal.

Includes:

2 x Baskets.

Nikon D-Eclipse C1 System With Melles Griot Accessories

This system was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further for safety reasons.

Included are the following;

Nikon D-Eclipse C1-LU3EX

Melles Griot 35-IMA-840-019

Melles Griot 05-LHP-991

Melles Griot 56ICS/S2695

Melles Griot 25-LGP-193-230

Zeiss Axiovert 200M Fluorescence Microscope

This system was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in full working order, however we recommend it be cleaned internally and be serviced once purchased.

This microscope consists of the following:-

• Zeiss Axiovert 200M Body

Model: 1005-820

• HAL 100 Halogen Lamp

Model: 44 72 19 1039-685

• Carrier for Transmitted Light Illumination

Model: 1005-840

• LCD Display

Model: 1071-167

• Polarizer D (Rotatable)

Model: 1121-813

• LD Condenser 0.55

Positions: H, Ph1, Ph2, Ph3, DIC, DIC

Model: 1005-847 (DIC Prisms not fitted)

• Manual Stage with Universal Mounting Frame K

Frame Model: 451352

• 5-Position MOT Reflector Turret

Model: 1064-365

Filters:

• Fs 02
• Fs 10
• Fs 15 (1046.281)
• Fs 31 (1046.281)
• One unknown filter (slot shows as "empty" but contains a cube)

• HBO 100 Mercury Lamp

Model: 1007-980

• Includes FluoArc PSU (light in power switch does not work, but functionality unaffected).
• Model: 434-355
• (Run hours of the lamp are unknown.)

• Binocular Tube 45º/23

Model: 1005-827

• Fitted with W-Pl 10x/23 Eyepieces
• Model: 1016-758

• FL Incident-Light Equipment

Model: 1066-230

• Includes:
• Adjusting Aid for HBO (Model: 452369)
• 2 x Iris Stop Sliders (Model: 1062-360)

• Objective
• Zeiss Plan-NEOFLUAR 20x/0.50
• Model: 1004-072

Thermo Heto PowerDry LL3000 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

Digital CR Reader With Cassettes

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition.

It powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order prior to removal.

No software is included.

S/N: 3985

Multivac A300/51 Vacuum Sealer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

As it has been used in a lab setting it is only suitable for lab use again in the future. It is not to be used for commercial catering or food packing.

JEOL JSM 840A  SEM Scanning Electron Microscope System

This was removed from a university lab where it was surplus to requirements.

The lab confirmed it was in working order prior to removal, but the control panel was removed and sold separately. It has not been tested at all at our facility but it is in good cosmetic condition with marks from use.

Included are;

Main unit:

1 x JEOL JSM-840A Scanning Microscope

Model: JSM-840A

Serial#: EP130077

Item has attached:

1 x Oxford Instruments 6605

Serial#: 09091-3390-339-521

Power Supply Unit:

JEOL JSM-840A Main Power CSL

Model: JSM-840A Main Power CSL

Serial#: EP130077-40

Also included:

JEOL Pump

Model: N/A

Serial#: N/A

Good cosmetic condition.

Lx36Wx24Hx50cm

JEOL JSM-840A User Manual

JEOL JSM-840A Service Case

This contains:

JEOL Extender MP001569-01

Various washers, fixings, screws etc.

Carl Zeiss MCS 500 System & Multiplexer

These units were removed from a university lab where they were surplus to requirements.

Everything powers up and the lab confirmed it was in working order when last used.

Included are;

Carl Zeiss MCS 500 System Spektrometer BLX500-4 + MCS 522 UV-VIS

Model: MCS 500

Serial#: 028989

Carl Zeiss Multiplexer

Model: Multiplexer

Serial#: 021166

Carl Zeiss Enclosure

Model: Double Ch.Syst.

Serial#: 029050

RS-LINK 1.2

Serial#: 1806-1009

PSM-V24/FO-G/S (Qty. 2)

Perkin Elmer Model Clarus 500 Gas Chromatograph (FID Detector) Lab

This item was removed from a university lab where it was surplus t requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order when it was last in use.

TRUMPF Mars 2.04 Operating Table/Medical Bed

This item was removed from a university laboratory where it was surplus to requirements.

The operating table powers on and is in good cosmetic condition. It is fully operational, having been thoroughly tested with all moving parts functioning properly and responding to remote controls.

Notably, the surgical bed has never been used with patients or tissue samples.

Specifications:

• Max Patient Weight: 360 kg
• Max Height (while flat): 116 cm
• Max Length (while flat): 180 cm
• Model: Mars 2.04

Bruker MicrOTOF Mass Spectrometer

This item was removed from a university lab where it was surplus to requirements.

The unit is in excellent cosmetic condition and powers on. The previous owner has reported it to be in working condition.

However, no PC or software is included.

Model: QT 0201 G003

Serial No.: 228888.00101

Perkin Elmer LabChip GX Touch HT Automated Bioanalysis System

This item was removed from a university where it was surplus to requirements.

The unit is in good used cosmetic condition. It has an issue with the built-in touch screen, which does not output a display. However, the system has been successfully set up using an external Philips display and functions correctly.

Included:

• Philips external monitor (configured as the main display)
• Wireless mouse and keyboard (requires AA batteries, not included)

Specifications:

• Model: LabChip GX Touch HT
• Serial No.: GT1635N0540

Asymptote VIA Freeze Nitrogen Free Freezer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

Working when previously in use, password protected by Cytiva so cannot be tested by ourselves, reset through Cytiva will be required by next user, this cannot be done pre-sale as it will form part of the servicing contract agreement. Cytiva have been contacted and are happy to do this post-sale.

Also included is the following:

1 x 48 position well plate Asy_30063 BO1

Jenway 6705 UV/Vis Spectrophotometer

This item was removed from a university laboratory where it was surplus to requirements.

The spectrophotometer is in good cosmetic condition, with a few remaining stains and scratches after cleaning.

It has been powered on, but no further testing has been conducted.

The password for the Supervisor Account is available on request.

Specifications:

• Instrument Memory: 968 MB, 99% Free (Files 36)
• Light Source: Xenon
• Spectral Bandwidth: 4 nm
• Stray Light: <0.05% at 220 nm
• Wavelength Range: 320-1100 nm

Model: 6705

Serial No.: 1019

Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Super-Lite Autoclavable Rotor

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. Temperature and RPM testing were conducted successfully.

Temperature Testing :

• Set to -20.0ºC, stabilized at -18.0ºC
• Set to 37.0ºC, stabilized at 37.0ºC
• Set to 40.0ºC (max), stabilized at 40.0ºC

RPM Testing:

• Held steady at 15,000 RPM

Included Rotor:

• Sorvall SLA-1500 Super-Lite Autoclavable Rotor (max 121ºC)
• In good cosmetic condition

Bruker Microtof Bench Top ESI-TOF MS Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, with some damage sustained to the casing as displayed.

It powers on, but we are unable to conduct further at our facility.

The power supply cable is included.

TA Instruments Nano 6300 DSC Differential Scanning Calorimeter

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Specifications:

• Model: 6300
• S/N: SNA025377

Perkin Elmer Model Clarus 500 Gas Chromatograph (FID Detector) Lab

This item was removed from a university lab where it was surplus t requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order when it was last in use.

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020.

It is in good cosmetic condition with minor marks.

Included with it are;

Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS software

Several manuals, safety, performance and maintenance schedule, pre-installation and operation

New and used spare skimmer and sampler cones

Spare electron multiplier

new and used spare printed circuit boards

Various tubing and connectors

Packet of various Thermo O rings

Many other unidentified small parts in sealed packaging

*Dimensions not added*

BMM Weston Steam Generator Model 2616 w/ Lubron Osmostar 250 Water Purifier Lab

This system was removed from a university where it was surplus to requirement.

Testing on these units is not possible due to the original hard-wiring of the steam generator and the presence of residual water in the filters and pipes. The steam generator will require re-wiring before use.

Unfortunately, the copper pipes were cut during removal, rather than being properly disconnected, therefore, will require substantial recommissioning work to get the system up and running again.

This system comprises the following:

BMM Weston Steam Generator

Model 2616

Serial No. DH14744

Two 30KW heating elements

123-litre boiler capacity

168˚C design temperature

6.6 bar operating pressure

Lubron Water Technologies Reverse Osmosis System

Model Osmostar 250

Serial No. 10022407

Year 2010

250 litres per hour, 30 bar working pressure

Lubron Softstar Water Softener

Serial No. 10012208

Year 2010

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is surplus to requirements.

The lab informed us that it was working when last used.

The microscope is from 1998, has one SE2 Detector.

Included are the following;

Hitachi S3000H SEM Scanning Electron Microscope Lab

Model: S-3000H

Date: 9/8/12

Part#: 50E-G386

Serial#: 1014-30

System specifications

- 0.3 - 30kV acceleration voltage range

- 5 nm resolution at 25kV in variable pressure mode

- 150mm diameter maximum specimen size

- Dual-bias for low voltage signal noise

- Backscatter mode

Canatron Transformers EN 60742 Transformer

Model: EN 60742

Serial#: CT6699

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: G8E008620

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: T9A 012253

Hitachi S3000H SEM Control Panel

Serial#: 1014-30

Edwards Oil Mist Filter EMF20

Serial#: A 462 29 000

Hitachi Measure Function Setup Disk V 01-05

Serial#: 50E-5497

Hitachi SEM Data Manager Setup Disk V 01-05

Serial#: 50E-5502

Hitachi S-3000Series V 10-16 CD Disc 1 & 2

Serial#: 50E-8108

Hitachi PC-SEM Restore CD Disc 1 & 2

Serial#: 1014-30

Adaptec SCSI Select v2.57.4 Floppy Disk

Serial#: 1492920-00

Adaptec AVA-2915LP/2930LP v1.13 Floppy Disk

Serial#: 1495022-00JA

HP Operating System DVD

Serial#: 483886-B21

Contec Drivers Software COM Setup Disk v.1.8

Serial# LYBM994

HP Compaq Business PC Documentation and Diagnostics DVD

Serial#: 490849-B21

HP Operating System DVD

Serial#: 394378-002

HP Operating System DVD

Serial# 486467-B22

HP Restore Plus! DVD

Serial#: 481206-B25

Roxio Creator Business 10 DVD

Serial#: 498164-B21

S300H Printed Circuit Board

Model S-3000H SEM Instruction Manual

Serial#: 50E-9247-9

Hitachi S-Type Filaments

Date: 08.06.201

Lot#: 0490228080

Serial#: 777-0179