This Thermo Spectronic French Pressure Cell Press was removed from a university lab where it was surplus to requirements.

Thermo Spectronic French Pressure Cell Press FA078E

Serial Number: 21QD066001

The item powers on and is in reasonably good cosmetic condition, we are unable to test it further at our facility.

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab

This system was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on.

The previous owner has notified us that this system is in full working order.

This system includes the following:

1. Pharmacia LKB VacuGene Pump
2. ProXPRESS 2D User's Guide
3. ProXpress Test Sheets
4. 2950-2017 Gell Cassette Assy
5. 2950-2019 UV Gel Adaptor (Sealed)
6. 2950-2048 Calibration Sample Assy
7. PX2950-2006
8. 2950-2049 Standard Wet Gel Cassette Assy
9. Phoretix Software
10. Proteome 1D Analyser Software and manual

Waters Micromass Q-Tof micro Mass Spectrometer

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. We have been advised that it will require flushing out before it can be used.

It is in good cosmetic condition with minor marks.

Leica Microsystems Type - TCS SP2 Confocal Microscope System

This was removed from a university lab where it was surplus to requirements.

What is included is in good working order, but the system is not complete.

It is missing the following;

Table top

Cooling unit

Microscope isolation table

Camera

Flexi tube for prior unit.

Bulb for prior unit.

There may be more missing parts, but we are unable to confirm.

It is in good cosmetic condition with minor marks.

Included are;

Leica TCS SP2 Microscope

Model: RCS SP2

Serial#: 142400026

Attached to microscope:

Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS

Leica ∞/-/C HC PL APO 20x/0.75

Leica ∞/0.17/E HC PL APO 10x/0.40 CS

2 x Eyepieces HC PLAN S 10x/22

Leica Condenser 0.53 S 23 (521500)

Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511)

All other items included:

Prior Lumen200

Model: L200/C

Serial#: 70808

Ernst Leitz Wetzlar Gmbh

Type: 307-072.45

Hg 100 W Bulb

Leica Power Supply for DiodeLaser COH 405nm, 25mW

Part#: 1530910001 03

Leica DM R Manual

Leica Confocal Software

Leica TCS User Manual

Leica PC with Software installed.

Leica Dust cover for Microscope and PC.

Jenway 6705 UV/Vis. Spectrophotometer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition other than some stress cracks present on the screen protector. This does not impair its functionality.

This item powers on and passes all self-diagnostic tests on start-up. The previous client stated it was in good working order prior to removal.

PSS / Ramada Warehouse Shelf Racking with Boards

Included are the following;

Uprights, which are all 90cm deep.

586cm

Qty: 6

507cm

Qty: 5

389cm

Qty: 5

Beams

278.5cm length

Qty: 226

Boards

134x89.5cm

Qty: enough for all beam levels. We're happy to supply equal boards to beams (as 2 beams per level and 2 boards per level).

Column guards and be included - 1 per upright

We are happy to sell as a split purchase or full load

Collection only from CF83 3HU

We can forklift load onto a suitable vehicle

This item is new in stock. Please enquire for further details.

Rigaku X-ray Diffractometer (XRD) Ultima III

This system was removed from a university lab where it was surplus to requirements.

The system is in reasonable used cosmetic condition. It has not been powered on at our site due to our on-site risk assessments surrounded X-Rays.

Various components and parts are included as listed below, along with a PC setup, although no Rigaku software programs appear to be installed on the PC.

However, there are the following software disks included:

1. Rigaku Basic Software (Cat No.: 9240J101)
2. Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
3. Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

System Specifications:

1. Model: Ultima III
2. Cat No.: 2035M410
3. Serial No.: DD3654N

1. 6 Station Holder
2. Model: SA-HEM3
3. Cat No.: 4057J101
4. Serial No.: 00563702

1. Patlite Beacon
2. Model: LMS-L (SN-06X03M)

1. Rigaku DC Motor Controller
2. SN: DD12866

1. Rigaku Long Fine Focus
2. Type: R01-29-0202
3. NC: 9430 022 73201
4. No. DK 402688

1. Rigaku CBO Cross Beam Optics
2. Cat No.: 2220B101
3. SN: DD12793

1. Additional Rigaku parts:

1. Cat No.: 5738E402 (SN-DD061813)
2. Cat No.: 2155G101 (SN-DD12804)
3. Cat No.: 4601K831 (SN-DD12154)
4. Cat No.: 4253A101 (SN-DD11586

1. Vexta Stopping Motor
2. Model: PK543-A
3. SN: UR70J32307

PC Setup:

1. Dell Optiplex 9020 with monitor, keyboard, and mouse
2. The PC is in working order with all passwords cleared. It contains a few Rigaku files, but no software programs appear to be installed.

Included Manuals/Software:

1. 2 x Rigaku D/MAX 2000/PC Series Instruction Manual
2. X-Ray Diffractometer Instruction Manual
3. Rigaku Basic Software (Cat No.: 9240J101)
4. Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
5. Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

Loose spare parts included:

1. Rigaku Cat No.: 2701E201 (SN-AD08851)
2. Container of round parts: Rigaku 900003 SH, w/Groove
3. 2 x Small containers with unknown parts
4. Scintag Generator Key
5. Key labeled: "Microscope"
6. Container of small metals, including:
7. 1 x Bag labeled "Silicon"
8. 1 x 640d Silicon Powder
9. 2 x Tubs UCAR Spectroscopic Powder
10. 1 x Tub labeled "Tung Flake"
11. Approximately 20 x small containers of Silicon metal

Seal AA3 - 3x Control Modules, 3x Chem Trays, 1x 2L Diluter, and Pump

This system was removed from a university lab where it was surplus to requirements.

The items are in fair cosmetic condition and power on. However, we were unable to get the system to connect properly due to the incomplete nature of the setup.

The included PC is equipped with AACE 7 Software by Seal Analytical, but it couldn't be tested as the system is not complete.

Included Items:

1. 3 x Control Modules
2. Serial Nos.: 8015593, 8015595, 8015596
3. 3 x Chem Trays
4. Serial Nos.: 8015815, 8015813, 8015819
5. 1 x 2L Diluter
6. Serial No.: 1473090
7. 1 x Pump
8. Serial No.: 8015682

Sim-Aminco French Pressure Cell Press FA078E

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition with some marks and rust.

This Thermo Scientific Varistain Gemini ES Slide Stainer was removed from a university lab where it was surplus to requirements.

The main unit powers up and passes self-tests. The lab reported that it has no known defects.

Included with it are

1 x Acer Monitor

1 x A78010352 Controller - This connects to the main unit via serial cable and has the software to control it installed.

There is a bag of 9 discs, labelled the following;

5 x Blank(no labels)

1 x Cytology Stainer >Saturday Set Up.

1 x 'Spare disc'

1 x Cytology Stainer >Protocol Set Up.

1 x Cytology Stainer >Protocol Set Up (Back up 2)

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

This was removed from a university lab where it was surplus to requirements.

The cabinet contains the following items.

Aerotech A3200 Ndrive CP x 5

Serial#1:577057/7

Serial#2:577057/6

Serial#3:681834/7

Serial#4:681834/8

Serial#5:681834/2

All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.

National Instruments Signal Conditioning Connector Block x 2

Model: SC-2345

Both have stickers on the front of the items

Sicker on item 1: pH Sensor

Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays

There are other small electrical switches and controllers inside.

Climet CI-154 1 CFM Particle Counter

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order.

it is in good cosmetic condition with minor marks.

Agilent 2100 Bioanalyzer System with Software & Accessories

This was removed from a university lab where it was surplus to requirements.

The unit powers up and passes all diagnostic tests when connected to the laptop. The unit does require a service as it has exceeded 1000 hours since the last one.

The included software has the licences for 2100 Electrophoresis & 2100 Instrument control.

The included IKA mixer is specific for the chips this system uses.

Includes:

-HP ProBook 6560b Laptop With Power Cable

-Agilent Bayonet Electrode Cartridge

Part no- 5065-4413

-Agilent test Chip Kit (Expired on 11/5/14)

Part no- G2938-68300

-Safe lock tubes

-14 RNA Nano Chips (Expired on 3/5/13)

-Electrode Cleaner

-STD Accessory Kit Series C

-All relevant guides, manuals and information booklets

-Agilent 2100 Expert Software

-Agilent Chip Priming Station With Syringes

-Agilent IKA MS 3 Vortexer

Model- MS 3 B S36

This Perkin Elmer Optima 2100 DV Optical Emission Spectrometer was removed from a university lab where it was surplus to requirements.

The instrument powers up but we were unable to test it further at our facility. The lab did inform us though, that it was fully working prior to removal.

It is in very good cosmetic condition with only minor marks from use.

This Thermo Scientific Multifuge X3R Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in excellent cosmetic condition with only minor marks from use.

Included with it is;

1 x Thermo Scientific Rotor Model No. 75003607

2x Swinging Buckets

Model 75003608

Max Load 800g

Max Speed 4700rpm

Max Cycle 70000 cycles

(2x) 5x50ml Tube Holders

2x Swinging trays/Microplate Buckets

75003617

Max load 500g

Max Speed 4700rpm

Max Cycle 120000 cycles

Autoclavable 121ºC

This Applied Biosystems MagMAX Express 96 Particle Processor was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition with some marks from use. The table Rotation works, but we were unable to test it further without software.

Ambion MagMAX 96 Total RNA Isolation Kit Instruction Manual

12 x Processing Plate & Lid (PN-10038GA1)

This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted.

It is in good cosmetic condition with minor marks.

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

This was removed from a university lab where it was surplus to requirements.

All the units power up but have not been tested further.

It is in good cosmetic condition with minor marks.

It is made up of the following modules;

1x Tecan RSP 5031 Robotic Sample Processor

S/N: 1652 JR

1x Emka STC 8808

S/N: 00454

1x Emka IOS 3

S/N: 00371

1x Emka Switching Unit

S/N: No serial number

1x Haake DC10 Circulator

Type: 003-2859

S/N: 1WDIN12879

Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.

Included are;

1x Olympus Fluoview

Model FV1000

The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.

The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed.

1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.

1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.

1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.

1x FV10-PSU Key:

Model 1201

The unit is in good cosmetic condition.

1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.

1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.

1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.

It is not known if the Burner has been replaced after 200 hours.

1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.

1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.

1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3

The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.

1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.

1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.

1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.

Accessories:

1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition

1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.

1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.

Spacers:

2x L3cm xW3cm xH0.5cm

2x L4cm x W4cm x H0.5cm

The units are in good cosmetic condition.

Misc Accessories:

1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor

1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable

1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)

Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver

1x mini disc

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered on, we are unable to test it further at our facility.

Model: TSCD-II

S/N: 202004581

Total Welds: 00001203

Soft Version: S00017

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with a minor scratch on the front.

The PSU is included.

Scanna ScanMax 225 Mail Room Security X-Ray Machine  Model - SMB225D2G20

This was removed from a university lab where it was surplus to requirements.

The unit powered up but we were unable to get the monitor to communicate with the onboard PC. It was not tested further.

It is in good cosmetic condition with only minor marks from use. It has a manual included with it.

Inside dimensions - D56.5 W42 H54cm

This Thermo Nicolet Avatar 360 FTIR System was removed from a university lab where it was surplus to requirements.

The lab assured us it was in working order prior to collection, but unfortunately, the Power supply was not supplied with the system, and is not included.

The PC powers on and has the following software on it.

Python 25

ARCGIS

MiniTab 15

Blue J

AsyMetrix.

The system is in reasonably good cosmetic condition but has marks from age and use.

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered on, we are unable to test it further at our facility.

Model: TSCD-II

S/N: 201808521

Total Welds: 00005367

Soft Version: S00017

Shimadzu Prominence HPLC System - DGU-20A5 - LC20-AT - SPD-20A w/ Software

This was removed from a university lab where it was surplus to requirements.

The system is working but we were told that is has been unused for the past 2-3 years but does have all the required accessories and software. It can be a bit temperamental and the last time it was used for teaching it was prone to air bubbles and occasional pressure problems, but likely just needs a service.

Included are;

Model - Reservoir Tray

Cat no. 228-45041-91

SN - L20304303756

Prominence Degasser

Model - DGU-20A5

Cat no. 228-45019-32

SN - L20244301963

Powers on

Prominence Liquid Chromatograph

Model - LC-20AT

Cat no. 228-45001-38

SN - L20114370128

Powers on

Door doesn't close properly

Prominence UV/VIS Detector

Model - SPD-20A

Cat no. 228-45003-38

SN - L20134303055

Powers on

Door hinge is broken so it doesn't stay on

Manuals/Software:-

LabSolutions LCsolution Release 1.21 SP1

USB Dongle LCsolution Multi-LC (SN-L51254300014S7)

Shimadzu UV-1650PC Instruction Manual

Shimadzu User Authentication Tool Instruction Manual

Shimadzu Gradient Valve Kit for LC-20AD/20AT Installation Manual

Shimadzu HPLC LC Workstation Administration Manual

Shimadzu HPLC LC Workstation Operation Manual

Shimadzu LCsolution LC-Assist Version 2.1 Instruction Manual

Shimadzu LCsolution QCTool Manual

Shimadzu LCsolution Version 1.2 Software Release Notes

Shimadzu LCsolution Chromatography Data System Quick Manual

Shimadzu On-line Degasser DGU-20A3/DGU-20A5 Prominence Manual

Shimadzu Solvent Delivery Module LC-20AT Prominence Manual

Shimadzu UV/VIS Detector SPD-20A/SPD-20AV Prominence Manual

Mix of Syringes/Columns:-

Hichrom Inertsil ODS2

Hamilton Micro Syringe

2 x Hamilton 1002RN Syringe 2.5ml

Hamilton Rheodyne Valve 50ul Syringe

SGE Rheodyne Valve 50ul Syringe

Shimadzu Pathfiner HPLC Column

Other bits include:-

Raco case full of small parts including tubing, clamps, tools etc.

New Brunswick Scientific C760 Innova Ultra Low Freezer Chest Freezer

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

Included with the freezer are various rack units:

18 x 13 compartment rack 14 x 14 x 76cm

14 x 9 compartment rack 18 x 12 x 63cm

2 x 10 compartment rack 16 x 16 x 64cm

2 x 10 compartment rack 15 x 16 x 67cm

2 x 10 compartment rack 14 x 14 x 59cm

2 x 9 tray rack 14 x 14 x 50cm

This item is new in stock. Please enquire for further details.

Hewlett Packard 1100 Series HPLC System, G1322A, G1312A, G1313A, G1315A Lab

This system was removed from a university lab where it was surplus to requirement.

All included units are in reasonably good cosmetic condition and power on independently, we are unable to test them as a system at our facility.

This system comprises the following:

1 x ALS-G1313A-DE82206357

1 x BinPump-G1312A-DE83102889

1 x Degasser-G1322A-JP03924665

1 x Degasser-G1322A-JP73013168

1 x DAD-G1315A-DE82204388

1 x ColComp-G1316A-DE02206870

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on with the bottom-mounted lamp in good working order.

We are unable to test the top-mounted lamp as the required power supply is not included.

Includes with the microscope are the following:

1. Leica MPS 60 Camera
2. Leica ∞/0.17 C Plan 100x/1.25 Oil Objective
3. Leica ∞/-/A N Plan 5x/0.12 Objective
4. 504058 Leica Illuminator
5. Leica 807-072.057 Lamp Module (damaged)
6. Box of misc tools and accessories

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

Peqlab PeqSTAR 96X (Standard) Thermal Cycler

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Buehler Delta Abrasimet Abrasive Cutter Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The workshop has fitted a plug for testing, it will be removed before the sale and will need one fitting or hard wiring on arrival.

Clamp dimensions: 8cm x 4cm.

Disc dimensions: 9.5in/23.5cm.

Disc expiry date: 05/2019.

Julabo F1000 Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

Everything powers up and the system is in good cosmetic condition with some marks from use.

There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code

'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)

We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.

This error makes it impossible to home the system. So it could not be tested any further.

The system comprises of;

1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation

Cat no. A31840

Unit dimensions - W77 L92 H98cm

1 x IBM ThinkCentre PC

MT-M 8113-DA1

Biomek Software Version 3.3 installed.

1 x Lenovo Monitor

Type - 9227-AC1

1 x Lenovo Keyboard

1 x IBM Mouse

2 x Nalgene 2 Gallon Waste/Supply Bottles

Box of Accessories:-

Beckman Coulter AccuFrame

Beckman Coulter Vacuum Valve Unit

Power Adaptor

Various cables

8 x 2ml Tube holders (24 tube slots in each)

94 x 2ml tubes

Vacuum Manifold Base

23mm Spacer Collar PN 719751

36mm Collar

3 x Thermo Scientific 96 well 0.2ml plates.

Integra Biosciences Agarclav AG-L Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

Micromeritics Gemini w/ Flow Prep 60

These items were removed from a university lab where they were surplus to requirements.

Both power up but have not been tested further.

They are both in good cosmetic condition, with minor marks from use.

All items included;

1x Micromeritics Flow Prep 60:

Model FlowPrep 060 LB

1x Micromeritics Gemini:

ModelGemini

1x Micromeritics Gemini Remote:

Model 2360

1x Micromeritics Memory Card

Model Gemini 2360