Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount
• Data Cable

Thermo Elemental Model Type Solaar S2 AA Series Spectrometer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Includes:

• Rubidium Data Coded Hollow Cathode Lamp (NC 9423 390 30371)

Priorclave PS/MID/C60 Top-Loading Autoclave

This autoclave was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. The previous owner has stated it was in good working order prior to removal.

Includes:

• Key

MVE TEC 3000 800 Series -190°C Cryogenic Freezer with Controller

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. No further testing was possible as it requires liquid nitrogen to operate.

Includes:

• Step access platform
• MVE TEC 3000 guidance manual
• 12 x internal storage racks (each approximately 14 cm (L) x 14 cm (W) x 87 cm (H))

Model: TEC 3000

Temperature Range: Down to -190°C

Cryomagnetics Inc 12T Horizontal Superconducting Magnet with CS-4 & LM-500

This system was removed from a university laboratory where it was surplus to requirements.

It is a 12T horizontal superconducting magnet with a 120mm diameter bore. The magnet features a high homogeneity central region, previously used for FT-ICR mass spectrometry measurements, and is also suitable for small-scale MRI applications. It is actively shielded with a low fringe field and incorporates a liquid helium cooled coil with an outer liquid nitrogen shield dewar.

The previous owner stated it is in full working order. The system has been refilled and maintained continuously over its lifetime with no issues and no quenches outside of training during charging.

Please note; The weight (2500kg) is approximate.

Includes:

• Magnet, discharged state (run down in 2023), flushed with nitrogen gas
• Manufactured ~2009, installed at university by Cryomagnetics soon after
• Run down and moved once in ~2010
• Insulation under vacuum
• All seals and burst discs intact and ready to use
• Instruction manual (paper)
• Cryomagnetics Inc Model CS-4 Bipolar Superconducting Magnet Power Supply 115v (Serial No: 3166)
• Cryomagnetics Model 4G Superconducting Magnet Power Supply Operating Instruction Manual for the 4G Magnet Power Supply
• Cryomagnetics Inc Liquid Cryogen Level Monitor Model LM-500 (Serial No: 3742)

Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor System

This system was removed from a facility where it was surplus to requirements.

All components are in good used cosmetic condition.

The system comprises a benchtop bioreactor controller, vessel, weighing platform, and data recording unit, supplied with a manual.

Includes:

• Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor Controller
• Cytiva Xcellerex XDR-10
• Mettler Toledo PBA655-B60 Weighing Platform
• JUMO Logoscreen 600
• Manual

In good used cosmetic condition.

The lab confirmed that the system was in good working order prior to removal.

Shimadzu IRAffinity-1S Infrared Spectrophotometer

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, with the front-status indicator light functioning correctly. The system could not be tested further as no software is included. No additional testing has been carried out.

Model: IRAffinity-1S

GE AKTA Purifier 10 FPLC System – P-900, UPC-900, Box-900, M-925, PV-908, INV-907

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and in good working order.

Please note: It is missing tubing and the CU950 interface module for PC connectivity.

Included components:

GE AKTA P-900 Pump

• Model: P-900
• Serial No.: 1358382
• Code No.: 18110856

GE AKTA UPC-900 Detector

• Model: UPC-900
• Serial No.: 1359309
• Code No.: 18112895

GE AKTA Box-900

• Model: Box-900
• Serial No.: N/A

GE AKTA M-925 Mixer

• Model: M-925
• Serial No.: N/A

GE AKTA PV-908 Valve

• Model: INV-908
• Serial No.: 1352513

GE AKTA INV-907 Valve

• Model: INV-907
• Serial No.: 1355914

ForTest Model T8060 Standard Level Differential Leak Tester Lab

This item was removed from a facility where it was surplus to requirement.

The unit appears to be in as-new condition and is supplied in the original box (opened), with the protective plastic covers still in place on the screen. The item has been powered on, however no further testing has been conducted.

Comes with:

• ForTest Model T8060 Standard Level Differential Leak Tester
• Original box (opened)
• Sealed envelope containing USB information
• USB serial cable
• 2 x connectors

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

Thermo S4 Atomic Absorption Spectrometer Package w/ Bulbs Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on but could not be tested further.

It is in good cosmetic condition, however, 3 out of 6 plastic clips for the bulbs snapped.

Includes:

• Operators manual
• Various parts and accessories
• Various bulbs:
• Thermo K 8mA
• Thermo NaK 8mA
• Thermo Mn/Nl/Fe 10mA
• Thermo Cu/Mn/Zn 10mA
• Thermo Na 8mA
• Thermo Ca/Mg/Si 15mA
• Thermo P 10mA
• Visimax I Hollow Cathode Lamps Cd
• Visimax I Hollow Cathode Lamps Cr/Fe/Mn/Ni
• Visimax I Hollow Cathode Lamps Ca/Mg/Al
• Instrumentation Laboratory SEN 1.6 20632-02
• Instrumentation Laboratory Zn 87267
• Instrumentation Laboratory Ca/Mg 87297
• Instrumentation Laboratory Fe 87225
• Instrumentation Laboratory Ni 87235
• Instrumentation Laboratory Mn 87231
• Instrumentation Laboratory Mo 87233
• Instrumentation Laboratory Fb 87227

Thermo S4 S Series AA Spectrometer System, with VP 100 and ASX-520

This was removed from a university lab where it was surplus to requirement.

All elements of the system power up and are in reasonably good cosmetic condition with minor marks. The lab confirmed it was in working order when last used.

Included are;

1x Thermo S Series AA Spectrometer

P/N: 9423 400 30041

S/N: GE711747

1x Thermo VP 100 Vapour System

P/N: 9423 460 10001

S/N: GE 604091

1x Cetac ASX-520 Auto Sampler

S/N: 100520A520

Melles Griot Anti-Vibration Isolation Table with 4 Isolating Legs Lx244 Wx126 Hx91

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and remains untested.

Includes:

• 4 x Melles Griot Isolating Legs, Part No. 070T1055

Specifications:

• Dimensions: Lx244 Wx126 Hx91 cm
• Measurement: Imperial

Please note: Sockets and 3-phase cable/plug shown in the first two images are not fitted or included.

Mettler Toledo Garvens 2 VS Checkweigher

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

GE Healthcare ÄKTA System with Workstation and Software

This system was removed from a university laboratory where it was surplus to requirements.

All units are in good cosmetic condition and power on, we are unable to test the system further at our facility.

The Lenovo Thinkstation PC has Unicorn 5.01 and MassLynx V4.2 software installed and functioning correctly.

The system comprises the following:

Amersham Biosciences UV-900

Model: UV-900

Serial No.: 01148619

Amersham Biosciences P-900

Model: P-900

Serial No.: 01146904

Amersham Biosciences INV-907

Code No.: 18-1108-40

Serial No.: 01147887

Amersham Biosciences M-925

Code No.: 18-1118-89

Serial No.: 01146475

Amersham Biosciences CU-950

Serial No.: 2448

Lenovo Thinkstation PC with:

Unicorn 5.01

MassLynx V4.2

Keys included

NEC 17" Monitor

NEC Keyboard and Mouse

Amersham Biosciences pH/C-900 Monitor (Passed calibration)

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount

Luminex Magpix Microplate Reader w/ Software & Manuals Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in good working order prior to removal.

Includes;

Accessories

• 2 x 8x9 well plate
• 1 x DataLogic Gryphon
• 1 x Datashur USB 32Gb (Password locked)

Software

• 1 x Luminex xPONENT 4.2 Software for MAGPIX
• 2 x Luminex MAGPIX Verification Kit
• 1 x Luminex MAGPIX Calibration Kit
• 3 x Luminex MAGPIX Verification Kit (Mini CD)
• 1 x Luminex MAGPIX Calibration Kit (Mini CD)

Manuals

• Luminex xPONENT for MAGPIX 4.2 Software User Manual
• Luminex xPONENT for MAGPIX Quick Guide

Hudson Solo SOL9 Liquid Handler

This item was removed from a university lab where it was surplus to requirements.

The robot is in very good used condition and has been successfully tested for communication with the included

software.

The previous client has confirmed it being in working order.

System Includes:

• 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU)
• 4 x 10cm Tall Nests
• 2 x 6cm Tall Nests
• 1 x 4.5cm Nest
• 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units:
• 1 with a TPS 620-5033 plate
• 1 with a TPS 620-5045 plate
• 2 x PSU's
• 1 x BioShake Heated Shaker Plate (marked as faulty)
• 2 x Boxes of 1000ul Pipette Tips (all sealed inside)
• 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed
• 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Wyatt Technology DynaPro DP-TH-01 Titan & DP-AMB-01 Microsampler

This system was removed from a university lab where it was surplus to requirements.

Both units are in good cosmetic condition and power up.

However, full functionality testing requires connecting to a PC with specific software, which is not included.

The previous owner has stated it was in good working order prior to removal.

Includes:

• USB cable
• DVI cable

Model Numbers:

• Titan: DP-TH-01
• Serial Number: 111-DPTH
• Laser Power (mW): 60
• Wavelength (nm): 828.98

• Microsampler: DP-AMB-01
• Serial Number: 104-DPAMB

Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab

This enclosure was removed from a university where it was surplus to requirement.

This listing is the enclosure only and does not include the tables it sits on. Refer to the red highlight featured on the diagram.

It originally housed a Thermo Scientific™ Spinnaker™ Microplate Robot System which is not included.

The measurements for the assembled enclosure are as follows:

Length x 448cm

Width x 152cm

Height x 118cm

This item includes various brackets and fixings as seen, but we are unable to confirm if all the required items are included.

AKTA Purifier System with pH/C-900, UV-900, P-900, Box-900, and Frac-900

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear. No further functional testing has been conducted.

The system comprises the following modules:

• AKTA Purifier
• Serial No.: 56303327 KD 001769
• System No.: 18140000 001654

• pH/C-900
• Model: pH/C-900
• Serial No.: 56118981 KD 003619

• UV-900
• Model: UV-900
• Serial No.: 56119689 KD 003743

• P-900
• Model: P-900
• Serial No.: 56600001 KN 002409

• Frac-900
• Model: Frac-900
• Serial No.: 56303949 KD 004222

Invitrogen Luminex 100/200, XYP, SD and PC System w/ Software Lab

This item was removed from a facility where it was surplus to requirement.

The main Luminex 100/200 unit is in good cosmetic condition but could not be powered on due to testing restrictions regarding class 3+ lasers at our facility.

All remaining units are in good cosmetic condition and power on.

The previous owner stated the system was in working order up until it was last used in mid 2025

Systems Comprises:

• Invitrogen Luminex 100/200
• Invitrogen Luminex XYP
• Invitrogen Luminex SD
• PC, Monitor, Keyboard & Mouse (Luminex Software installed.)

Bruker SamplePro - Sample Preparation for NMR by Solid Phase Extraction

This system was removed from a university where it was surplus to requirements.

The computer powers on and includes the required software to design and run SPE protocols. Comes with a box of consumables (see pictures). We are unable to test it further at our facility.

It is in good cosmetic condition, however the door is slightly cracked and missaligned.

The unit has been in storage for several years and is not suitable for blood or small-volume applications.

Vante Tube Sealer Model 4160 with 4161 & 4162 Sealing Heads

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes;

• Vante Tube Sealer Model 4160
• Vante 4161 Sealing Head
• Vante 4162 Sealing Head

Amco Modular Enclosures Cabinet with SVT Associates MBE Modules

This system was removed from a university lab where it was surplus to requirement.

The cabinet contains five modules that were previously part of an SVT Associates Molecular Beam Epitaxy (MBE) system.

The system comprises the following:

• Oerlikon MAG DRIVE Digital module (includes manual, in German)
• Module labelled "Effusion Cell Controller" – SN: 530909192005
• Module – SN: 530908092005 (only module confirmed to power on)
• Module labelled "Gate Valve Controller"
• Another module labelled "Effusion Cell Controller" (would fail a PAT test due to missing panels exposing internal components)
• 1x Keys

Additional details:

• Approx. module space width: 44 cm
• Internal extension sockets are fitted for American-style plugs
• Includes a large number of various internal cables

MP Biomedicals FastPrep-24 5G Bead Beating Device

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good working order.

The item has been tested using the pre-programmed testing option, which ran successfully. The test tube rack lock holds the rack securely in place.

Includes:

• Additional tube rack
• Instruction sheet
• Original box

OAI UV Exposure System with 2105C2 Controller & OAI 150 Exposure Timer

This system was removed from a facility where it was surplus to requirements.

All components power on and operate together.

The UV exposure system illuminates when the 2105C2 illumination controller is activated and the Exposure command is triggered on the OAI 150.

Both the illumination controller and the exposure timer show functional power indicators. A 5-second test exposure was successfully carried out using the OAI 150.

The UV exposure system is fitted with an exhaust duct and anode adapter cable, and includes a shutter cable with sensor and auxiliary fittings. No further testing has been performed.

Included Components:

OAI UV Exposure System

OAI 2105C2 Illumination Controller

OAI 150 Exposure Timer

Exhaust duct

Anode adapter cable

Shutter cable with sensor & auxiliary connectors

New Wave Research Model UP-213 with Tempest 20Hz Laser Ablation System Lab

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

The previous owner stated it was in working order when it was last in use.

Includes;

• New Wave Research Model UP-213 with Tempest 20Hz Laser
• PC, Monitor, Keyboard & Mouse
• Spare Tubing
• Coaxial Cables
• VGA Cable

Jasco FP-8200 Spectrofluorometer System with PC & Peltier Cell Holder

This system was removed from a facility where it was surplus to requirements.

The spectrofluorometer was successfully connected to the PC system, however no further testing has been carried out at our facility.

Software/Firmware:

Driver version: 1.07.02 (Build 2)

ROM version: 1.02.02

Included Components:

• Jasco FP-8200 Spectrofluorometer

• Jasco ETC-814 Peltier Thermostatted Cell Holder with Stirrer

S/N: B002561515

• Jasco MCB-100 Mini Circulation Bath

S/N: B051961408

• Dell OptiPlex 5040 PC (Intel Core i3-6100 @ 3.70GHz)

• Dell Monitor

S/N: CN-0KKMMW-74261-61P-715L-A06

• NetPower NPW1000 Line-Interactive UPS

P/N: ANPW1K0AA3

• Additional accessories as shown in photos

SPEX SamplePrep 1600 MiniG Homogeniser Lab

This item is sold on behalf of a client. It is surplus to requirement.

It is in very good cosmetic condition and in complete working order, with minimal prior use.

Accessories included;

• 2 ml Small Tubes (with steel balls)
• 8 unopened boxes × 24 tubes each
• 1 opened box of 24 tubes
• 1 opened box with 13 tubes
• 234 spare lids
• Cryoblocks for the small 2 ml tubes
• 15 ml Short Vials (with lids and steel balls)
• 92 vials with lids
• 5 spare lids
• 94 larger steel balls
• Cryoblocks for the short 15 ml tubes

It is available for collection from Bristol UK.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Holmarc Opto-Mechatronics Spray Pyrolysis Equipment Model HO-TH-04N

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, and the heated plate was successfully tested, reaching a maximum temperature of 500˚C. No further functional testing was conducted.

In reasonable cosmetic condition, with some tape residue present around the casing.

Includes:

• Integrated Holmarc Spray Pyrolysis Controller
• Serial No.: HSMC104
• (Powers on via internal socket)
• Airsa Model AFP11-3D Fan (not fitted)
• Metal part labelled 'Container' (connects to left side of unit)
• Glass chamber with pump fittings (rust present on metal parts)
• Blue hosing

Model: HO-TH-04N

Infors HT Minitron Co2 Shaking Incubator w/ Humidity (2018)  

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in complete working order

Life Technologies Ion Torrent System - Proton Semiconductor Sequencer & Ion Chef

This system was removed from a university where it was surplus to requirements.

All included units are in good cosmetic condition and power on, we are unable to test them further or as a system at our facility.

The previous owner stated it was in working order when last in use.

System includes;

Ion Torrent Proton Semiconductor Sequencer

• Model - Proton Semiconductor Sequencer
• S/N - 245644-0717

Comes with Ion Torrent P1 - DA003572

Ion Torrent Ion Chef Instrument

• Model - IONCHEF
• S/N - CHEF00212

Ion Torrent Ion OneTouch 2

• Model - Ion OneTouch 2 Instrument
• S/N - 2456450-2447

Ion Torrent Ion Touch ES

• Model - 8441-21
• S/N - 423928

Ion Torrent Ion Chip Minifuge

• Model - Ion Torrent Ion Chip Minifuge
• S/N - 1212 0929

Accessories

• Dell PowerEdge T620 Server
• 3 x wash bottles
• Honeywell Scanner
• 2 x Ion Chip 316

Synrad Firestar Series Ti FSTI80KFC Laser

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It has not been powered on due to testing limitations with Class 3 and above lasers at our facility.

No further testing has been performed.

Includes:

Synrad UC-200 Laser Controller

Model: UC-2000

Serial No.: UC20236052176

Scanlab HurryScan II 14 Galvanometer Scanner

Typ: HurryScan II 14

Serial No.: 307930

Logitech Attack 3 Joystick

Professional 2-Port USB to RS-232 Serial Adapter

Sky Tronic 5A Professional DC Regulated Power Supply

Model: 650.654UK

2 x Mean Well SP-100-15 Power Supplies

Mean Well RSP-1500-48 Power Supply

This Perkin Elmer TurboMatrix 40 Headspace Sampler was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition and powered up.

When powered up, the item ran a sampling method that displayed the motor in good working order, we are unable to test this item further at our facility.

Photon Technology International EasyLife LS Fluorescence Lifetime System Lab

This was removed from a university lab where it was surplus to requirements.

We have powered everything up but have not tested it further at our facility. The lab confirmed it was working prior to removal.

The system includes the following :

PTI BryteBox

Part No - 30-102528

S/N - 1394

EasyLife LS Fluorescence Lifetime System

S/N 1003-EL

PTI Master S/N - 2513

PTI XenoFlash PSU

S/N - 1906-XPS2

Gold PSU

5 X Class 1 LED Product

310 nm, 440 nm, 505 nm, 525 nm, 635 nm

OPTIPLEX 330

S/N - HXK2X3J

Model No. - DCNE

Operating System - Windows XP Version 2002

We have the passwords available upon purchase

It also comes with HP Monitor, Keyboard and Mouse

This item is new in stock. Please enquire for further details.

This item is new in stock. Please enquire for further details.

Eppendorf epMotion 5073 Liquid Handling System w/ Accessories and Consumables

This system was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition powers on, with both Multicon and Easycon control systems operational.

The Easycon was used to verify full axis movement, and the UV bulb and HEPA filter were tested and found to be working.

Supplied with a comprehensive range of accessories and consumables.

Includes:

• Transport Locking System
• 2x Waste Bins with Lids
• 1x Thermorack CB 100 µL
• 2x ReservoirRack
• 1x ReagentRack (7 Channel)
• 1x ReagentRack
• 2x Ø29 mm Double Tube Holder
• 5x 0.5+Adapt 1.5/2.0 mL Tube Holder
• 2x 24 Well PrepRack
• 2x epT.I.P.S Motion 1000 µL (Opened and in machine)
• 1x 24 Well Rack 0.5 + Adapter / 1.5 / 2.0 mL
• EasyCon Tablet
• MultiCon PC

Consumables (All Eppendorf Branded):

• 18x SAFE-LOCK TUBE 2.0 mL, PCR Clean (Sealed)
• 2x SAFE-LOCK TUBE 2.0 mL, PCR Clean (Sample Pack)
• 3x Boxes of ep Dualfilter T.I.P.S 50 – 1000 µL
• 2x Boxes of ep Dualfilter T.I.P.S 50 – 1250 µL L
• 1x Box of epT.I.P.S Motion SafeRacks 1 – 50 µL
• 1x Box of epMotion Reservoir 100 mL
• 1x Box of Reservoir 400 mL
• 3x Boxes of ep Motion Dispensing Tool TS 50 1 – 50 µL

BD Accuri C6 Plus Flow Cytometer System w/ Cleaning/Waste Bottles & Accessories

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further due to restriction with testing Class 3+ lasers at our facility.

The previous owner stated it was in working order prior to removal.

Includes;

• USB-Serial Cable
• 1x Box of BDFACSClean (340345)
• Bottles marked A,B,C,D, 2x 24 Tube Holders
• 2x Boxes of BD Sheath Additive
• 1x BD Extended Flow Cell Clean Solution
• 1x BD Detergent Solution Concentrate
• 1x Open Bag of 125 Falcon Polystyrene Round-Bottom Tubes
• 1x Syringe and Holder