All Products
Items 1021 to 1040 of 3200
£ POA 2 in stock
Edwards PRM 10 Vacuum Gauge Head Part no. D021-66-000 Lab
ITEM-18747
This Edwards PRM 10 Vacuum Gauge Head Part no. D021-66-000 was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition but has some marks from use. It has not been tested.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.
£ POA 1 in stock
Edwards PRM 10 Vacuum Gauge Head Part no. D021-66-000 Lab
ITEM-18746
This Edwards PRM 10 Vacuum Gauge Head Part no. D021-66-000 was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition but has some marks from use. It has not been tested.
£ POA 1 in stock
Edwards PRM10 Gauge Head D021-66-000
ITEM-21096
This Edwards PRM10 Gauge Head D021-66-000 was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with some marks from use.
It has not been tested.
£ 2,700.00 (ex. VAT) 1 in stock
Edwards Two Stage E2M40 Vacuum Pump Lab
ITEM-17091
This item originated in a working Lab and has come to us as part of a lab clearout.
The pump was serviced in July 2019 and was never used since then.
£ 6,500.00 (ex. VAT) 1 in stock
Edwards Two Stage Vacuum Pump Model E2M80 w/ EH1200 Mechanical Booster MF100
ITEM-18994
This Edwards Two Stage Vacuum Pump Model E2M80 was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has some slight marks from use.
It has not been tested as it was previously hard-wired.
The unit is made up of the following parts;
1 x EDWARDS 80 TWO STEP VACUUM PUMP E2M80.
1 x EDWARDS MECHANICAL BOOSTER EH1200.
1 x EDWARDS OUTLET MIST FILTER MF100.
£ 187.50 (ex. VAT) 1 in stock
Edwards Vacuum Gauge / Pump Controller 101 C/N D361-09-000 Lab
ITEM-15905
This Edwards Pump Controller 101 C/N D361-09-000 was removed from a university laboratory where it was surplus to requirements.
The unit powers on but has not been tested further.
The unit is in very good cosmetic condition but has been used previously.
£ POA 1 in stock
Edwards Vacuum Pump Model - Speedivac 2 - A134-51-912 Lab
ITEM-18459
This Edwards Vacuum Pump Model - Speedivac 2 was removed from a university lab where it was surplus to requirements.
The unit powers up and runs but has not been tested further.
It is in reasonably good cosmetic condition but has some marks from use.
£ POA 1 in stock
Edwards Vacuum Two-Stage Rotary Pump Model RV3 A651-01-903 Lab
ITEM-19017
This Edwards Vacuum Two-Stage Rotary Pump Model RV3 was removed from a university lab where it was surplus to requirements.
The unit powers up and was tested with a gauge (not included). It reached 12.1832 PSI.
It is in good cosmetic condition but has some marks from use.
£ 74.53 (ex. VAT) 1 in stock
EEL Evans Electroselenium Ltd Unigalvo Vintage Galvanometer Lab
ITEM-15893
This EEL Evans Electroselenium Ltd Unigalvo Vintage Galvanometer was removed from a university where it was surplus to requirements.
The unit powers up but has not been tested any further than this.
It is in good condition but is very old.
£ POA 1 in stock
EG&G Wallac MultiCalc Manuals & Software Lab
ITEM-16557
EG&G Wallac MultiCalc Manuals & Riacalc WIZ V1.30 Software
This was removed from a university lab where it was surplus to requirements.
It is all in good condition but has not been tested.
Included is;
Multiple Floppy Discs containing Software installation packs and protocols.
1 x Introduction to MultiCalc Operation Manual.
2 x Quality Control With MultiCalc Manual.
1 x "Choosing The Right Manual" Flow Chart.
2 x MultiCalc Options Manual.
2 x 1224 MultiCalc Product Information Manual.
1 x Appendix to MultiCalc Manual For Program Version 2.6.
2 x User Programming With MultiCalc.
2 x MultiCalc Supervisor's Manual.
2 x User Guide To MultiCalc Functions Manual.
£ POA 1 in stock
Ekom DK50-10 S/M Mobile Air Compressor Lab
ITEM-20493
This Ekom DK50-10 S/M Mobile Air Compressor was removed from a university lab where it was surplus to requirements.
The unit powers up and the needle moved up to 6.5bar. It has not been tested further.
It is in good cosmetic condition but has some marks from use.
Specs
-Air tank 10L
-Run Time: 00714[29]
-Compressor p max 8 bar
-P out, P max (abs) 6.5 bar
£ 78.36 (ex. VAT) 1 in stock
Elco 4-017-1563 Fan Motors Type 3FGB-CO 85-38/5 Fan Deck Lab
ITEM-15915
Elco 4-017-1563 Fan Motors Type 3FGB-CO 85-38/5
This unit was removed from a university laboratory where it was surplus to requirements.
We were unable to test the unit but it is in good cosmetic condition.
£ 398.16 (ex. VAT) 1 in stock
Elcometer SCM 400 Salt Contamination Meter With Case and Accessories Lab
ITEM-14336
SCM 400 Salt Contamination Meter.
This item was removed from a lab during a clear out.
Elcometer SCM400.
Salt contanimation meter.
Appears to work as it should.
Requires 9v battery (not included).
When tested it did read salt levels on a random piece of paper towel.
However it has not been fully tested.
We would suggest that a full service and inspection is carried out prior to use.
Comes with:
Original carry bag.
Pouch of gloves.
Small baggies.
2 x pairs of plastic tweezers and a syringe.
Bag of pressure support pads.
Item appears to be in good cosmetic condition.
Please see photos for further details.
£ POA 1 in stock
Electrical Geodesics GPS 100 EEG Photogrammetry System C-PKG-GPS-1000-000 Lab
ITEM-19443
This Electrical Geodesics GPS 100 EEG Photogrammetry System was removed from a university lab where it was surplus to requirements.
The unit powers up and the controller to raise and lower it seems to be in working order. It requires a PC and software to test it any further.
It is in good cosmetic condition but has some marks from use.
The max height of it fully raised is 196cm.
£ POA 1 in stock
Electro-tech system Inc Environmental Controlled Chamber Model 518 Lab
ITEM-21098
This Electro-tech system Inc Environmental Controlled Chamber Model 518 was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). The lights are not working but the fan is running.
We set the temperature at 20˚C, the item showed 19.6˚C, and the digital thermometer showed 18.4˚C.
We set the temperature at 37˚C, the item showed 37.8˚C, and the digital thermometer showed 36.1˚C.
We set the temperature at max temperature (almost 55˚C), the item showed 55.1˚C, and the digital thermometer showed 48.4˚C.
It is in reasonably good cosmetic condition with some marks from use. It only has one glove.
£ POA 1 in stock
Electrolab pH Control Fermac 260 U9300-0010 Lab Spares/Repairs
ITEM-20322
This Electrolab pH Control Fermac 260 U9300-0010 was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition. There are signs of prior use, such as stains and rust.
The item powered on fine and both pumps turned without issue. The 'acid' pump however continued to rotate even when switched over to alkali and the 'alkali' pump only turned when switched to its prime.
The lab informed us that it no longer sucks.
I was not tested further and is sold for spares/repairs.
£ 145.12 (ex. VAT) 1 in stock
Electrolab Fermac 250 Modular Bench-Top + Bioreactor System
ITEM-10288
This set was removed from a chemical engineering lab during a clearout.
We are not sure if it is the complete system, although the lab manager said that all the equipment from the store was working when last used.
£ 206.94 (ex. VAT) 1 in stock
Electrolab Fermac 250 Modular Bench-Top Bioreactor System
ITEM-10235
This unit was removed from a chemical engineering lab as surplus to requirements.
We have not tested the system.
£ POA 1 in stock
Electrolab Fermac 260 pH Control U9300-0010 Lab
ITEM-20323
This Electrolab Fermac 260 pH Control U9300-0010 was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition but there are signs of prior use, such as stains and rust. The back panel isn't secured and flexes when handled.
The item powered on fine and both pumps turned without issue.
Part of the alkali pump is loose and the acid pump moves even after changing 'prime'.
It couldn't be tested further and is sold for spares/repairs.
£ POA 1 in stock
Electrolab Fermac 260 pH Control Unit U9300-0010 Lab
ITEM-20321
This Electrolab Fermac 260 pH Control Unit U9300-0010 was removed from a university lab where it was surplus to requirements.
The item is in good cosmetic condition but there are some minor signs of prior use. It did sound like there was something loose inside but it seems to operate fine regardless. It was not tested further.
The item powered on fine and both pumps turned without issue.
Items 1021 to 1040 of 3200