All Products

SPARES/REPAIR ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Sorvall RC 5C Plus RC-5C+ Centrifuge Lab

ITEM-37328

Sorvall RC 5C Plus Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on.

However, during testing, the item produced the following code: Error Code 4 - indicating a 'Drive system failure'.

Which prevented further testing from being conducted.

Therefore, it is listed as Spares/Repair.

£ 3,000.00 (ex. VAT) 1 in stock

Baker Hypoxycool Culture Media Hypoxia Conditioner Lab

ITEM-37960

Baker Hypoxycool Culture Media Hypoxia Conditioner

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility.

Internal dimensions 38 x 38 x 30cm (LxWxH)

£ 3,000.00 (ex. VAT) 1 in stock

GE Asymptote VIA Thaw CB1000 Dry Automated Thawer

ITEM-37988

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing Lab

Serial No. TBA1118037

Software Version 1.3.17-06f731

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order. (Thermometer not included.)

Thawing temperature range: -196˚C to 0˚C

Thawing temperatures: 34˚C to 0˚C

Last calibration: 19.05.23

The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

£ 3,000.00 (ex. VAT) 1 in stock

Veeco Dektak 3 Surface Profilmeter

ITEM-38268

Veeco Dektak 3 Surface Profilmeter

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition.

It is untested as it needs a direct connection to a PC with software for power, therefore, no tests can be performed. It also includes a Panasonic GP-KR222 Camera, which cannot be powered on without a direct connection to the Dektak 3.

£ 3,000.00 (ex. VAT) 1 in stock

Agilent 1200 Series HPLC G1312B Binary Pump Lab

ITEM-38344

This Agilent Technologies 1200 Series HPLC G1312B Binary Pump was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel.

We are unable to test this item further at our facility.

Power supply included.

£ 3,000.00 (ex. VAT) 1 in stock

Qiagen Pyromark Q96 ID + Vacuum Prep Worktable System Lab

ITEM-39948

Qiagen Pyromark Q96 ID + Vacuum Prep Worktable System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This system comprises the following:

Qiagen Pyromark Q96 ID

Qiagen PyroMark Vacuum Prep Worktable

Ref - 60-0237

PyroMark Vacuum Prep Tool

Ref - 60-0236

PyroMark Q96 ID

Application Software User Manual

£ 3,000.00 (ex. VAT) 1 in stock

ElectroLab Dissolution Tester EDT-08LX Lab

ITEM-41569

ElectroLab Dissolution Tester EDT-08LX Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

£ 3,000.00 (ex. VAT) 1 in stock

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation Lab

ITEM-41642

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This item also includes the following:

Pyromark Q96 Lab station with plastic liquid container

£ 3,000.00 (ex. VAT) 1 in stock

Bruker MicrOTOF Q MicrOTOF-Q Time-of-Flight Mass Spectrometer Lab

ITEM-42122

Bruker MicrOTOF Q Mass Spectrometer

This item was removed from a university laboratory where it was surplus to requirements.

The mass spectrometer powers on and is in great condition with minimal wear.

No further testing has been conducted.

Specifications:

Model: micrOTOF-Q
Serial No.: 228888.00074

Included Software:

I/O and Security Software and Documentation
Version: 1.16
HP / Hewlett-Packard REV.B
CD Kit: 443200-404

£ 3,000.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat Microplate Hotel w/ Plate Transfer & Scanner Lab

ITEM-42405

Thermo Scientific Cytomat Microplate Hotel with Plate Transfer and Scanner

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and successfully completes the homing sequence. The unit is in excellent cosmetic condition.

The lab confirmed it was in full working order prior to removal.

Specifications:

Cytomat Hotel
Order Code: 51021435
Serial No.: 41869238
Plate Lift Magazine MPH/800 Serial No. 0021
Capacity: 9 x Cytomat P23 plate towers, 21 plate positions each
Year: 2015
Beckman Coulter ALP Plate Conveyor
Serial No.: 4426AE102715001 (partial)
Length: 72 cm
Year: 2015
Microscan MS-710 Barcode Scanner
Serial No.: 1528560

Includes:

2 x data cables

£ 3,000.00 (ex. VAT) 1 in stock

Miltenyi Biotec autoMacs Pro Separator System Lab

ITEM-44488

Miltenyi Biotec Auto Macs Pro Separator System Lab

This system was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This system does not include the required Fluid Bottles, which are available for purchase from the manufacturer's website.

£ 3,000.00 (ex. VAT) 1 in stock

Boxer 300/150LR Steam Steriliser Autoclave Lab

ITEM-44966

Boxer 300/150LR Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit has one missing wheel and another damaged, so it is currently placed on a pallet with blocks. It also requires a plug to be fitted.

Working Condition: The previous client has stated that it was in working order prior to removal. We have not tested it at our facility due to the absence of the plug.

Specifications:

Model: 300/150LR
Serial No.: M2436/87772
Chamber Dimensions: Approximately 540mm diameter x 610mm long
Capacity: Approximately 150 liters
Internal Pressure: 38.7 psi @ 140°C
Power Supply: 415V, 3 phase, 50Hz

£ 3,000.00 (ex. VAT) 1 in stock

Applied Biosystems / Hitachi 3130 Genetic Analyzer With Software Lab

ITEM-45085

Applied Biosystems 3130 Genetic Analyzer with Software

This system was removed from a university laboratory where it was surplus to requirements. It powers on, but no further testing has been conducted.

The previous user indicated the system requires significant maintenance, particularly with the analyte column, which needs regular flushing or refreshing to prevent polymer crystallisation.

Cosmetically, the unit is in good condition; however, it does not come with the original power cable. A NEMA 30A plug and a 32A 240V blue plug are required, but not included.

Included Software:

AB DNA Sequencing Analysis Software v 5.2
3130 Genetic Analyzer Data Collection Software v3.0
GeneMapper ID Software v3.2
SeqScape Software Version 2.5

Included Accessories:

2 x 3100-Avant Capillary Array (36 cm)
1 x 3130 & 3100-Avant Capillary Array (50 cm)
1 x 3130 & 3100-Avant Capillary Array (36 cm)

Specifications:

Model: 3130
Serial No.: 17308-039

SPARES/REPAIR ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Optima L-100 XP Ultra Centrifuge Spares/Repair Lab

ITEM-45138

Beckman Coulter Optima L-100 XP Ultra Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in good cosmetic condition with minimal signs of use.

However, there is an issue with the screen staying black during boot, indicating a potential PC graphics fault.

It also has a vacuum error

For the above-listed reasons, it is listed as Spares/Repair.

£ 3,000.00 (ex. VAT) 1 in stock

Dionex Shodex RI-101 Detector HPLC Chromatography Lab

ITEM-46794

Dionex Shodex RI-101 Detector HPLC Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition, with some rust and age-related marks, including a mark on the display screen.

It powers on, but no further testing has been conducted.

£ 3,000.00 (ex. VAT) 1 in stock

Biotek Epoch Microplate Reader Spectrometer Lab

ITEM-47051

Biotek Epoch Microplate Reader Spectrometer

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and communicates with a PC via USB, tested using the Gen5 software provided on a USB stick. Note: the software functions as a 30-day trial and will require purchase for full activation. The spectrometer is in good cosmetic condition.

Includes:

USB stick containing Gen5 software Trial version
USB cable
Owner's manual

Please note, a 24-volt, 48-watt center-positive PSU is required for operation, not included with this item.

A system report from the software is available upon request.

£ 3,000.00 (ex. VAT) 1 in stock

Safe Lab Airone 1000RS Mobile Ductless Fume Cupboard 'Unused - As New' Lab

ITEM-47448

Safe Lab Airone 1000RS Mobile Ductless Fume Cupboard Unused

This item comes from an operational lab, where it is now surplus to requirements.

It is 'As New' as it has not been used its purchase in 2019.

Specifications:

Average inflow: 0.4m/s
Minimum working aperture: 200mm high
Maximum working aperture: 365mm high
Voltage: 230V
Size: 1000 x 700 x 1850mm (w x d x h)
Internal dimensions: 840 x 500 x 865mm (w x d x h)
Filter type: RS CMS schools filter, a blended filter to meet the national curriculum needs for teaching science

This system is available for collection from Cardiff, UK.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 3,000.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat Microplate Hotel Lab

ITEM-48509

Thermo Scientific Cytomat Microplate Hotel Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Also included;

9 x P69 Microplate holders

£ 3,000.00 (ex. VAT) 1 in stock

Job Lot Of Swagelok Pressure Gauges + Compression Fittings

ITEM-39227

Job Lot Of Swagelok Pressure Gauges + Compression Fittings

These were removed from a university lab where they were surplus to requirements.

The parts are as follows:

PART NUMBER	DESCRIPTION	CONDITION	QUANTITY
PGI-50m-PG25-LASX-ABE	Pressure Gauge, Bottom entry, 0-25 Bar - Swagelok	BN	18
Valve	1/4" Ball Valve - Boss/Waverley & Others	Used	16
3/8" & 3/16" nuts, tees , fittings	Swagelok	Assorted	Assortment
~60mm Panel mount, bottom entry gauge		BNIB	5
PGU-50-PC200-L-4FSF	Gauge, bottom entry, UHPurity - Swagelok	BN	6
PGU-50-PC200-C-4FSF	Rear entry	BNB	5
Pressure gauge	Oil filled, rear entry, 0-11 Bar	New	4
Pressure gauge	Bottom entry, 0-11 Bar	New	6
Union elbow	3/8" Elbows		6
Union cross	3/8" Crosses		5
Straight union	3/8" Union		14
SS-4WVCR-6-400		BNIB	6
SS-4WVCR-CP		BNIB	6
Union	3/8" Elbow	Used	5
SS-810-1-8W	1/2" tube x 1/2" male weld	BNIB	2
SS-600-7-6-BMP	3/8" x 1/2"F		2
SS-PB4-TA4	Box of 10 quick connects	BNIB	1
SS-PB8-TA8	Box of 10 quick connects	BNIB	4
SS-P	Box of 10 quick connects	BNIB	7
SS-QC4-S-400	Box of 10 quick connects	BNIB	3
SS-QC4-B-4PM	Box of 10 quick connects	BNIB	1
Assorted quick connects	Assorted quick connects	BN	~50

RECERTIFIED ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Priorclave Laboratory Benchtop Autoclave Type - PS/MVA/C40 Lab

ITEM-26223

This Priorclave Laboratory Benchtop Autoclave Type - PS/MVA/C40 was removed from a university lab where it was surplus to requirements.

The unit powers up and has been fully serviced. It is in full working order.

It is in good cosmetic condition with minor marks.

External dimensions - D66 W70 H66cm

Internal dimensions - D50 W35 H29cm

£ 3,000.00 (ex. VAT) 1 in stock

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A Lab

ITEM-25567

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A

These units were removed from a university lab where they were surplus to requirements.

Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads.

They are in good cosmetic condition with minor marks from use.

1x Anritsu Error Detector MP1764A

Model. M06340

1x Anritsu Pulse Pattern Generator MP1763B

Model. M06940

£ 3,000.00 (ex. VAT) 1 in stock

Christie Mirage S+4K Commercial Projector

ITEM-36558

Christie Mirage S+4K Commercial Projector

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

The control buttons and remote control are fully functional and performing as intended.

£ 3,000.00 (ex. VAT) 1 in stock

Voltaire ISR-9288 Grid Director

ITEM-39219

Voltaire ISR-9288 Grid Director

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 3,000.00 (ex. VAT) 1 in stock

Interscience Spiral easySpiral Pro Automatic Spiral Plater Lab

ITEM-36900

Interscience Spiral easySpiral Pro Automatic Spiral Plater

This was removed from a university lab where it was surplus to requirements.

The item powers on and appears to run through test sequences.

The item is in a reasonable, used cosmetic condition with marks from use.

£ 3,000.00 (ex. VAT) 1 in stock

Bright OTF/AS/EC 960841296 Cryostat Lab

ITEM-48728

Bright OTF/AS/EC 960841296 Cryostat Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

Includes;

Box of various parts
9 x Spare Blades
5 x Spare Smaller Blades

RECERTIFIED ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Thermo Scientific HERAcell 150i CO2 Incubator Double Stack Lab

ITEM-39008

Thermo Scientific HERAcell 150i CO2 Incubator Double Stack

This incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Thermometer not included)

It is in good cosmetic condition externally but the optional copper walls inside are showing some signs of oxidization, though this is normal, and does not affect the operation of the unit at all.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 3,000.00 (ex. VAT) 1 in stock

ENVAIR Fume Cupboard eco Chem Coalsafe Elite 06 Lab

ITEM-47298

ENVAIR Fume Cupboard eco Chem Coalsafe Elite 06

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The lab confirmed it was in good working order prior to removal.

Please note:

No UV light fitted
No internal sockets fitted

£ 3,000.00 (ex. VAT) 1 in stock

Zeiss Axiovert 200M Inverted Microscope with Lamp, Condenser & Filters

ITEM-47324

Zeiss Axiovert 200M Inverted Microscope with Lamp, Condenser & Filters

This item was removed from a facility where it was surplus to requirement.

The microscope powers on and all buttons function as they should. It cannot be tested further due to missing components, and the display screen surround is broken.

We are told it is in perfect working order. It just needs eyepieces and objectives adding.

The system comprises the following:

1 x Zeiss Axiovert 200M stand
1 x Zeiss HAL100 Lamp – 44 72 19
1 x Zeiss LD 4 Position Condenser 0.3 – 45 13 56 (H, Pho, Ph1, Ph2)
1 x Zeiss Motorized 5 Position Filter Turret (Empty) – 1064-365
1 x Zeiss Binocular Tube – 1005-827
2 x Zeiss Iris Stop Slider – 1062-360

Also includes:

1 x Can-Bus cable
1 x RS232 cable
1 x Axioset software disc

SPARES/REPAIR ITEM

£ 3,000.00 (ex. VAT) 1 in stock

86 x Vickers Instruments M14/2 Monocular Compound Microscopes Job Lot Lab

ITEM-49322

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

£ 3,000.00 (ex. VAT) 1 in stock

HyClone 50L Single Use Bioreactor Lab

ITEM-31068

HyClone 50L Single-Use Bioreactor

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks from use.

£ 3,000.00 (ex. VAT) 1 in stock

Monmouth Clean Tent – Portable Clean Area Enclosure 350 x 240 cm

ITEM-49586

Monmouth Clean Tent – Portable Clean Area Enclosure

This clean tent system was removed from a facility where it was surplus to requirements.

The tent has not been set up or tested on site, but all major components appear to be present, and overall the equipment looks to be in good cosmetic condition.

The clean tent provides a controlled, filtered workspace suitable for light clean-area tasks.

The included Envirco ULPA (U15) filtration unit powers on, and the airflow responds correctly to the dial settings.

No further testing has been carried out.

Included

Monmouth clean tent enclosure (approx. 350 × 240 cm)

Envirco Corp ULPA Filter Unit

Model: A12-002

Filter Type: ULPA (U15)

Serial: 50682F11563299

Powers on with functioning airflow control

Flooring tiles

35 × tiles: 51 × 49 cm

5 × tiles: 51 × 9 cm

Blue mat: 77.5 × 61 cm

Filter stand

Tent frame and fabric panels (as present – not assembled on site)

£ POA 1 in stock

Oxford Instruments INCA X-Stream & INCA MICS Microanalysis System Lab

ITEM-46785

This item is new in stock. Please enquire for further details.

RECERTIFIED ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Nikon Eclipse E800M Fluorescence Microscope Lab

ITEM-25095

This Nikon Eclipse E800M Fluorescence Microscope was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in good working order. A full report is available on request.

1x Nikon Eclipse E800:

Model C-LP

The unit powers on and is in good cosmetic condition.

There is some dust and dirt from general use.

S/N0183376

2x Nikon CFIUW 10/25 eyepieces.

1x Nikon Macro Slider

S/N 660048

1x Nikon Eclipse EH-21

8.4 volt / power supply for

Nikon Coolpix 995 Camera

Nikon Battery Charger

S/N E141988

1x Nikon Microscope Power Supply:

Model V-PS100E

The unit powers on and is in good condition.

S/N 603313

1x Nikon Coolpix Camera:

Model 995

The unit powers on and is in good cosmetic condition.

No battery supplied with the unit.

No memory card supplied with the unit.

S/N 4516080

£ 3,000.00 (ex. VAT) 1 in stock

Tricool MINAC 005LTS Chiller Unit Lab

ITEM-41275

Tricool chiller MINAC 005LTS

These items were removed from a university lab where they were surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Information from the client states both units are in working order.

£ 3,000.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell VIOS 160i CO2 Incubator Lab

ITEM-47203

Thermo Scientific Heracell VIOS 160i CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

In good cosmetic condition.

£ 3,000.00 (ex. VAT) 1 in stock

Bright Refrigerated Cryostat Microtome OTF/AS Lab

ITEM-31880

Bright Refrigerated Cryostat Microtome OTF/AS

This was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 3,000.00 (ex. VAT) 1 in stock

Metrohm 901 Titrando, 800 Dosino And 803 TI Stand With Accessories Lab

ITEM-44662

Metrohm 901 Titrando, 800 Dosino, and 803 TI Stand with Accessories

This system was removed from a university where it was surplus to requirements.

The system powers on and is in good working order. The 901 Titrando, 800 Dosino, and 803 TI Stand were tested with an in-house PC w/ software, and all components appeared to function as expected, including pH measurement, dosing, and stirring.

The PC used for testing is not included in the system.

The required software can be downloaded for free from the Metrohm website, but it will require a purchased licence after 30 days of use.

Included:

Metrohm 901 Titrando
Metrohm 800 Dosino
Metrohm 803 TI Stand
Control cable for PC interface

Specifications:

Model: 901 Titrando

Accessories: 800 Dosino and 803 TI Stand

Everything is in good cosmetic condition with some light signs of use.

NEW ITEM

£ 3,000.00 (ex. VAT) 1 in stock

LABCONCO 28-Port Manifold for Freeze-Dryer Lab

ITEM-49747

LABCONCO 28-Port Manifold for Freeze-Dryer

This item was removed from a facility where it was surplus to requirement.

The item is supplied in its original box, which has been opened, but the manifold remains inside the protective foam packaging.

It is essentially still sealed and in brand-new condition.

£ 3,000.00 (ex. VAT) 1 in stock

Leica EG1150H Paraffin Embedder Lab

ITEM-49756

Leica EG1150H Paraffin Embedder Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however we are unable to test it further at our facility.

There is a substantial amount of paraffin wax still solidified in the trays which cannot be removed.

The previous owner stated it was in working order prior to removal.

£ 3,000.00 (ex. VAT) 1 in stock

Leica DMLM Microscope w/ Renishaw MSC20 Encoded Stage 100 nm 5/10/20/50x Objec

ITEM-49755

Leica DMLM Microscope w/ Renishaw MSC20 Encoded Stage 100 nm

This item was removed from a university where it was surplus to requirement.

It is in good condition, powers on and is in good working order.

Includes:

Leica DMLM (S/N: 888074 / 254089)
Renishaw MSC20 Encoded Stage 100 nm (S/N: 9A2487)
Renishaw MSC20 Stage Controller
Kensington Technology Group Expert Mouse Model No. K64325 (S/N: 0844002106)
Eyepieces: HC PLAN 10x/20& HC PLAN 10x/20 M

Objectives:

N PLAN 5x/0.12 ∞/-/A
N PLAN 10x/0.25 ∞/-/A
N PLAN 20x/0.40 ∞/0/D
N PLAN 50x/0.75 ∞/0/D

£ 3,000.00 (ex. VAT) 1 in stock

Eppendorf 5424 R Refrigerated Centrifuge w/ FA-45-24-11 Rotor Lab

ITEM-50085

Eppendorf 5424 R Refrigerated Centrifuge with FA-45-24-11 Rotor

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and powers up in good working order.

Included Components:

Eppendorf FA-45-24-11 Rotor

Original operating instructions

Spare fuses

Eppendorf rotor tool

SPARES/REPAIR ITEM

£ 3,000.00 (ex. VAT) 1 in stock

BD Biosciences FACSAria Cell Sorter w/ Fluids Cart & Accessories Lab

ITEM-45457

BD Biosciences FACSAria Cell Sorter with Fluidics Cart & Accessories

This item was removed from a university lab where it was surplus to requirements.

The fluidics cart powered on successfully, while the main unit was not powered on due to the presence of a class 3B laser.

The system is in good cosmetic condition and includes various accessories.

The previous client has stated it this system is not currently in working order due to it being decommissioned for an extended period.

The fluidics cart and temp control unit are fully working.

It is listed as Spares/Repair.

Specifications:

FACSAria Cell Sorter
S/N: P07800002
FACSAria Fluidics Cart
S/N: N/A

Included Accessories:

1 x Peak Telecentric Lupe 7x
8 x Waste Caps (PN: 335917)
2 x BD Biosciences Adjustable Nozzle 100um Rev A (PN: 342909)
5 x BD Biosciences Adjustable Nozzle 100um Rev B (PN: 337612)
2 x BD Biosciences Adjustable Nozzle 70um Rev B (PN: 342908)
Variety of tube holders
Assorted loose lids, tubing, lubricant, and small replacement parts

£ 3,000.00 (ex. VAT) 1 in stock

Affymetrix GeneChip™ Scanner 3000 7G with GeneChip 450 Fluidics Station

ITEM-50593

Affymetrix GeneChip™ Scanner 3000 7G with GeneChip 450 Fluidics Station

This system was removed from a university laboratory where it was surplus to requirements.

The GeneChip Scanner 3000 7G is in very good, clean cosmetic condition with minimal wear and powers on. No further functional testing has been carried out. The system includes the autoloader.

The GeneChip Fluidics Station 450 is likewise in very good, clean condition. It powers on, and all four dispenser screens illuminate correctly. Further testing could not be carried out at our facility.

Included Components:

Affymetrix GeneChip Scanner 3000 7G

Model: GeneChip Scanner 3000 7G

Serial Number: 54725350

Affymetrix Autoloader

Serial Number: A17260

Affymetrix GeneChip Fluidics Station 450

Serial Number: 60130820

Manufacture Date: August 2014

Accessories:

Affymetrix Qualification and Service Manual

£ 3,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova U101 -86 Ultra Low Temperature Freezer

ITEM-50444

New Brunswick Scientific Innova U101 -86 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in excellent cosmetic condition.

Includes;

1 x Set of Keys

£ 3,000.00 (ex. VAT) 1 in stock

UniSense Fertilitech Model Embryoscope ES-D Lab

ITEM-46716

UniSense Fertilitech Model Embryoscope ES-D Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing.

RECERTIFIED ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Dionex Ion Chromatography System AS40, LC25, IC20 Lab

ITEM-38972

Dionex Ion Chromatography System

This was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in good working order. A full report is available on request.

It is in good cosmetic condition with minor marks.

Included are;

Dionex AS40 Automated Sampler

Model: AS40-1

Serial#: 98040160

Dionex IC20 Ion Chromotograph

Model: IC20

Serial#: 99120293

Dionex LC25 Chromatography Oven

Model: LC25

Serial#: 0205041

£ 3,000.00 (ex. VAT) 1 in stock

Leica RM2125RT Microtome Lab

ITEM-41623

Leica RM2125RT Microtome Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with all mechanical elements in good working order, we are unable to test it further at our facility.

The unit has no sample holder.

£ 3,000.00 (ex. VAT) 1 in stock

Cepheid GeneXpert IV PCR Machine Lab

ITEM-50151

Cepheid GeneXpert IV PCR Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on.

The previous owner stated it was in working condition prior to removal.

Please note; There is no software included.

£ 3,000.00 (ex. VAT) 1 in stock

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab

ITEM-37194

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor.

The rotor is not included.

£ 3,000.00 (ex. VAT) 1 in stock

Stainless Steel UHV Vacuum Chamber with Multiple CF Ports

ITEM-50222

Stainless Steel UHV Vacuum Chamber with Multiple CF Ports

This item was removed from a facility where it was surplus to requirements.

The chamber is constructed from heavy-duty brushed stainless steel and is fitted throughout with CF (ConFlat) flanges, making it suitable for high- and ultra-high-vacuum applications such as research, thin-film deposition, surface science, and analytical instrumentation.

Cosmetic condition is good with expected signs of prior use.

The chamber provides a flexible platform with a wide range of access points for pumps, instrumentation, feedthroughs, and diagnostics.

Key Features:

Construction: Stainless steel, brushed finish

Flange Type: CF (ConFlat), various sizes

Side Ports: Multiple CF ports (approx. DN40–DN100) suitable for gauges, viewports, feedthroughs, manipulators, etc.

End Flanges: Large central flanges on both ends for turbopumps, extensions, or load-lock assemblies

Top Access Ports: Mixed-diameter CF ports for manipulators, deposition sources, electrical or gas feedthroughs

Base Flanges: CF flanges suitable for chamber mounting or high-capacity pumping configurations