All Products
Items 1121 to 1140 of 3200

£ 74.66 (ex. VAT) 1 in stock
Eppendorf 5415D Digital Benchtop Centrifuge Lab - Spares / Repairs
ITEM-15319
This Eppendorf 5415D Centrifuge was removed from a university where it was surplus to requirements.
The unit did not power up in testing so we were unable to test it. It is in good cosmetic condition but there is no rotor incuded.

£ 92.30 (ex. VAT) 1 in stock
Eppendorf 5417C Benchtop Centrifuge Lab F 45-24-11 rotor - Spars Repairs
ITEM-08745
This unit was removed from a lab as surplus to requirements.
The unit reports error 6 and doesn't run. Error 6 is supposedly:
Converter Overloaded
Brake Defective
Rotor Loose.
We removed and refitted the rotor but no success.
We have not tested it further.
Unit sold as spares/repairs.

£ 90.63 (ex. VAT) 1 in stock
Eppendorf 5424/5424R Centrifuge Rotor - 15000rpm - 24 x 3.75g - Lab
ITEM-17625
This Eppendorf 5424/5424R Centrifuge Rotor was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition but has been used previously. It has not been tested and will need to be inspected for safety before it is used again.
Max 15000 rpm.
Accepts 24 x 3.75g tubes.

£ 115.18 (ex. VAT) 1 in stock
Eppendorf 5424/5424R Centrifuge Rotor - 24 x 3.75g - 15000rpm - Lab
ITEM-17626
This Eppendorf 5424/5424R Centrifuge Rotor was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition but has been used previously. It has not been tested and will need to be inspected for safety before it is used again.
Max 15000 rpm.
Accepts 24 x 3.75g tubes.

£ 991.54 (ex. VAT) 1 in stock
Eppendorf AG Mastercycler Pro 384 PCR Thermal Cycler Lab
ITEM-17785
This Eppendorf AG Mastercycler Pro 384 PCR Thermal Cycler was removed from a university lab where it was surplus to requirements.
The unit powers on but requires a controller to set temperatures, so cannot be tested further.
It is in good cosmetic condition but has been used previously.
Hole size on heater block - 0.1mm

£ 270.54 (ex. VAT) 3 in stock
Eppendorf AG Mastercycler Pro Model 6321 Thermal Cycler PCR Lab Faulty
ITEM-17787
This Eppendorf AG Mastercycler Pro Model 6321 Thermal Cycler was removed from a university lab where it was surplus to requirements.
The unit does not power on. We are unsure as to why. It is in reasonably good cosmetic condition but has marks from use.
Hole size on heater block - 0.2mm
Sold as spares or repairs.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 1,232.89 (ex. VAT) 3 in stock
Eppendorf AG Mastercycler Pro S Model 6325 Thermal Cycler PCR Lab
ITEM-17863
This Eppendorf AG Mastercycler Pro S Model 6325 Thermal Cycler PCR was removed from a university lab where it was surplus to requirements.
The unit powers on but requires a controller to set the temperatures and to run, so it was not tested further.
It is in reasonably good condition but has some marks from sue.
Hole size on heater block - 0.2mm
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 1,055.12 (ex. VAT) 2 in stock
Eppendorf AG Mastercycler Pro vapo.protect Model 6321 PCR Thermal Cycler Lab
ITEM-17786
This Eppendorf AG Mastercycler Pro vapo.protect Model 6321 PCR Thermal Cycler was removed from a university lab where it was surplus to requirements.
The unit powers on but requires a controller for it to work.
It is in reasonably good cosmetic condition but has been used previously.
Hole size on heater block - 0.2mm
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

£ 1,124.27 (ex. VAT) 1 in stock
Eppendorf Benchtop Laboratory Centrifuge 5417C + 14000rpm TE010 Rotor Lab
ITEM-19983
This Eppendorf Benchtop Laboratory Centrifuge 5417C was removed from a university lab where it was surplus to requirements.
The unit powers up and the rotor runs smoothly up to the max of 14000rpm. The centrifuge is capable of going up to 20800rpm.
Included with it is;
1 x Rotor - Eppendorf 24 x 3.75g TE010
F 45-24-11 01433
Max rpm 14000
24 x slots for 2ml tubes.
The centrifuge is in reasonably good cosmetic condition with some marks from use.

£ POA 1 in stock
Eppendorf Benchtop Laboratory Centrifuge Model 5417C with 14000rpm Rotor Lab
ITEM-19547
This Eppendorf Benchtop Laboratory Centrifuge Model 5417C with 14000rpm Rotor was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested between 27rcf and 20817rcf.
It is in reasonably good cosmetic condition with some marks from use. The unit has had a brand new power switch fitted. The seal is in reasonable condition but may benefit from a replacement being fitted.
The rotor accomodates 2mL tubes.

£ 60.00 (ex. VAT) 1 in stock
Eppendorf Centrifuge 5424 Micro-Centrifuge (No Rotor) Lab Spares / Repairs
ITEM-17623
This Eppendorf Centrifuge Model 5424 was removed from a university lab where it was surplus to requirements.
The unit powers up but is indicating a lid error. The LCD display is working but the centrifuge has not been tested.
There is some damage to the casing, but it is in otherwise good, clean condition. There is no rotor supplied.
It is sold as spares or repairs due to the damage and lid error.

£ 56.25 (ex. VAT) 1 in stock
Eppendorf Centrifuge Model 5424 Microcentrifuge (No Rotor) Lab Spares or Repairs
ITEM-17622
This Eppendorf Centrifuge Model 5424 was removed from a university lab where it was surplus to requirements.
The unit powers up but will not operate citing a "no rpm" error (likely because there is no rotor fitted). It was not tested further. It is rated at 14680rpm.
It is in fairly poor cosmetic condition and there is damage to both the casing and the interior.
It is sold as spares or repairs.

£ POA 1 in stock
Eppendorf epMotion 5070 System with Accessories Lab
ITEM-20641
This Eppendorf epMotion 5070 System was removed from a university lab where it was surplus to requirements.
The unit is in good used cosmetic condition but it does have various scrapes and scratches from general use. The rear of the unit near the IEC input appears to be a bit dented in but it does not affect the operation of the unit at all.
The unit has been powered up and the head returns to its home position. The initialisation ran fine during start-up.
It is running 6.002 Software. And apAplication 1.111.
The system consists of:
1 x Eppendorf epMotion 5070 unit.
Which is fitted with:
1 x TS1000 40-1000ul Single-Chanel Dispensing Tool and also comes with a controller pad.
It comes with the following accessories:
1 x Eppendorf Holder For 6 Dispensing Tools.
1 x Eppendorf 0.5 + Adapter/1.5/2ml
1 x Eppendorf 55mm Height Adapter.
1 x Eppendorf Thermorack CB100ul
1 x Eppendorf Module Reservoir.
3 x Extra Boxed Dispensing Heads:
1 x TS50 1-50ul Single-Chanel Dispensing Tool.
1 x TS300 20-300ul Single-Chanel Dispensing Tool.
1 x TM50-8 1-50ul Eight-Chanel Dispensing Tool.
And the following consumables:
4 x Boxes of epT.I.P.S. Motion 1 - 50ul.
Plus 2 individual units.
10 x Boxes of epT.I.P.S. Motion 20 - 300ul.
1 x Box of epMotion Reservoir 100ml.
3 x Boxes of epT.I.P.S. Motion 40 - 1000ul.
Plus 2 individual units.
Some boxes are still sealed.
Some might have had some units removed.

£ 135.00 (ex. VAT) 1 in stock
Eppendorf FA-45-24-11 5424/5424R Centrifuge Rotor max 24x3,75g. max 13200rpm Lab
ITEM-15406
This Eppendorf FA-45-24-11 5424/5424R Centrifuge Rotor was removed from a lab during a clearance.
max 24x3,75g.
max 13200rpm.
It is in good used cosmetic condition but does have signs of use and could do with a good clean. There is a powdery residue inside and the lid is missing.
Hole dimensions are approx 10.9mm x 38.3mm.

£ POA 1 in stock
Eppendorf FemtoJet for MicroInjector Lab
ITEM-16514
This was removed from a university lab where it was surplus to requirements.
Included is;
1 x Eppendorf FemtoJet.
The unit is in good, used condition. It powers up fine and runs self-test but has not been tested further.
2 x Eppendorf Manuals.
1 x USB extension cable.

£ POA 1 in stock
Eppendorf Micro-Centrifuge Model 5424 (No Rotor) Spares or Repairs Lab
ITEM-17624
This Eppendorf Micro-Centrifuge Model 5424 was removed from a university lab where it was surplus to requirements.
The unit does not power up and repeatedly blew fuses.
It's in fairly good cosmetic condition but there is a slight crack to the casing.
It is sold for spares or repairs.

£ 82.36 (ex. VAT) 1 in stock
Eppendorf Microinjector 5242 Model 542 K 064 Lab
ITEM-05574
This Eppendorf Microinjector 5242 Model 542 K 064 was removed from a university laboratory where it was surplus to requirements.
The unit powers on but has not been tested further than this.
It is in reasonable condition but is showing marks from use. The LCD screen is also damaged and bleeding from the edges.

£ 1,430.15 (ex. VAT) 1 in stock
Eppendorf Micromanipulator 5171 + Joystick & Transjector 5246 + Control Pad Lab
ITEM-19320
Eppendorf Micromanipulator 5171 & Transjector 5246 with Accessories
This was removed from a university lab where it was surplus to requirements.
The units are all in reasonably good cosmetic condition but they do have various marks and signs of general use.
All the units power up and appear run but we have only carried out basic testing.
The system consists of:
1 x Eppendorf Micromanipulator 5171.
with Eppendorf 5171 100.005-11 Joystick controller.
And 2 x Eppendorf XYZ motor units.
The joystick does control all axes of the motor units when powered up. The micromanipulator only has the ability to connect one XYZ unit at a time. One of the motor units comes with some sort of framework attached.
1 x Eppendorf Transjector 5246.
Also comes with Eppendorf 5246 150.003-01 control pad.
The unit powers up and pumps. The controller also powers up and appears to operate the Transjector.

£ 75.75 (ex. VAT) 1 in stock
Eppendorf Transjector 5246 + Controller 524600978 Lab
ITEM-15349
This Eppendorf Transjector 5246 With Controller was removed from a laboratory where it was surplus to requirements.
The unit powers up and makes pumping/blowing noises but we were unable to test any further.
The buttons on the controller make it do different things so that appears to be working too.
Both units are in very good cosmetic condition but they do have some slight signs of use.

£ POA 1 in stock
Epson EMP-715 LCD Projector
ITEM-18388
This Epson EMP-715 LCD Projector was removed from a university lab where it was surplus to requirements
The unit powers up but has no remote, so we couldn't test it further or find out the lamp hours. It is in reasonably good cosmetic condition but has some marks from use.
Items 1121 to 1140 of 3200