Items 1141 to 1160 of 2608

Image of item

£ 289.37 (ex. VAT) 1 in stock

Heraeus 7591 Swing Bucket Rotor Centrifuge Lab

ITEM-11711

This rotor set was removed from a university store during a clearout.


We have not tested the rotor.

Image of item

£ 106.88 (ex. VAT) 1 in stock

Heraeus Biofuge Pico Benchtop Microcentrifuge Centrifuge 13000rpm Lab

ITEM-13149

This unit was removed from a lab during a clearout.


The unit works up to 13,000 rpm, though the rotor lid is missing.


However back of unit is quite rusted/corroded.



Image of item

£ 382.73 (ex. VAT) 1 in stock

Heraeus Biofuge Primo Benchtop Lab Centrifuge 13,000 rpm, 24 Eppendorf Tubes

ITEM-12121

This unit was removed from a lab as surplus to requirements.


It appears to be in full working order, and reached 13,000 rpm.


Image of item

£ 52.50 (ex. VAT) 1 in stock

Heraeus CO2 Incubator BB6220 50C Lab Oven - Spares / Repairs

ITEM-05893

This unit was removed from a lab as surplus to requirements.


We tested the unit at our site and it reached 37C and tested to 7% CO2 appearing to work well.


We sold to a customer and they reported that:


"sensor control panel faulty and needs replacing. Seems to have suffered moisture build up"."


Upon return it does not appear to work properly anymore, and further there was some damage to the unit in return transit - specifically a dent on the rear of the unit.


Unit is sold as spares / repairs only.


Item is faulty and customer is returning.



  • The internal dimensions are: (cm)

Length- 59cm

Width- 58cm

Height- 68cm

  • Due to the inside being split. both sides are 29cm wide.
  • The external dimensions are: (cm)

Length- 71cm

Width- 90cm

Height- 83cm

Image of item

£ 142.50 (ex. VAT) 6 in stock

Heraeus Hanau Graphite Crucibles Lab 37453-21

ITEM-13106

This set was removed from a university lab store during a clearout.


The lot appears to be unused in the original box.

Image of item

£ 151.88 (ex. VAT) 1 in stock

Heraeus Instruments Heracell 150 CO2 Incubators Lab - Spares / Repairs

ITEM-12664

This unit was removed from a lab as part of a replacement / upgrade programme.


The incubator powers on and heats and holds temp at 40C. We have not tested the CO2 function.


The door hinges are not quite square and so the door becomes loose when moved - the door seal is slightly broken, and so the door doesn't shut tightly.


The inside is heavily rusted / oxidised as shown in photo.


Unit probably works fine - but needs a refurbishment so is sold as spares / repairs.

Image of item

£ 164.03 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Centrifuge Lab Equipment

ITEM-10519

This unit was removed from a lab as surplus to requirements.


We have tested the unit and it appears to run properly, but there is a missing a bracket for the lid strut, and also a seal needs replacing, so unit needs a little refurbishment prior to use.

Image of item

£ 109.35 (ex. VAT) 1 in stock

Heraeus Labofuge 400R Benchtop Centrifuge Spares Repairs

ITEM-08826

This unit was removed from a lab during a clearout.


Unfortunately on testing the unit we get Error E-15. This apparently relates to the below:


"Open temp. sensor

check sensor, control circuits

replace sensor or main board"


We have not been able to open the unit to assess if there is a rotor.


Unit is sold as spares / repairs only.


Image of item

£ 729.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0 Benchtop Centrifuge + Rotor Lab 6000rpm

ITEM-13428

This unit was removed from a university lab as surplus to requirements.


We have powered the unit on and tested it to 6000 rpm where it appears to run smoothly.


There is a rotor included but it does not have any buckets.


Image of item

£ 98.41 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0 Mid Benchtop Centrifuge Spares Repair

ITEM-10128

This unit was removed from a university store room during a clear out.


It powers on but stops / starts intermittently.

Image of item

£ 246.04 (ex. VAT) 1 in stock

Heraeus Primo Benchtop Lab Centrifuge + Rotor Working but Noisy

ITEM-09572

This unit was removed from a lab as surplus to requirements.


We tested the unit and it runs up to 13,000 but is quite noisy, so probably requires a little servicing.

Image of item

£ 82.01 (ex. VAT) 1 in stock

Heraeus Primo Benchtop Lab Centrifuge - Spares Repairs

ITEM-12120

This centrifuge was removed from a lab during a clearout.


The units lid does not open, and so the unit is sold as spares / repairs.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Heraeus Sepatech Biofuge 15 Benchtop Centrifuge 10,000rpm Lab

ITEM-07328

Heraeus Sepatech Biofuge 15 Centrifuge.


Tested up to 10,000 rpm.

Image of item

£ 199.50 (ex. VAT) 1 in stock

Heraeus Sepatech Biofuge A Benchtop Centrifuge + rotor 13000rpm

ITEM-13038

This unit was removed from a lab as surplus to requirements.


Unit powers on and spins to 13000rpm buckets are 11mm diameter. Timer works, overall in good condition.


Image of item

£ 289.37 (ex. VAT) 1 in stock

Heraeus Sepatech Megafuge Centrifuge Rotor 6000 rpm BS4402/A Cat 3360 Lab

ITEM-10127

This pair of rotors were removed from a lab during a clearout.


One rotor looks to be in good condition - whereas the other has some damage making it only suitable for spares (e.g. spare buckets etc).


Both rotors are untested and would need to be safety tested prior to use.

Image of item

£ 246.04 (ex. VAT) 1 in stock

Heraeus Thermo Scientific Function Line Labofuge 400 Lab Centrifuge + Rotor

ITEM-08929

This unit was removed from a lab during a clearout.


We have tested the unit and it appears to be in good working order.

Image of item

£ 187.50 (ex. VAT) 1 in stock

Herbert & Sons Vintage Animal / Baby Weighing Scales Lab

ITEM-14572

Removed from a university lab as surplus to their requirements.


Item is old but in pretty good condition.


Includes a drop down tray for weighing babies/animals.


We tested it against our digital scales and it appears to be broadly accurate.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Hereaus Instruments Function Line Centrifuge SPARES/REPAIRS

ITEM-04275

Quality Centrifuge for spares repairs. Doesnt power up.

Image of item

£ 246.04 (ex. VAT) 1 in stock

Hermle Z 400 K Refrigerated Bench Top Centrifuge With Rotor

ITEM-08028

This unit came from a laboratory during a clearout as surplus to requirements.


We tested it and it ran smoothly to 3,500 rpm, and refrigeration seems to work properly as well. However, we have not tested it any further than this.


The unit comes with a rotor, but no buckets.

Image of item

£ 152.72 (ex. VAT) 1 in stock

Hermle Z229 Centrifuge Benchtop Laboratory Lab + Rotor

ITEM-09330

This item was removed from a lab as surplus to requirements. We have tested the unit and it appears to work as expected but we havn't tested it fully with samples etc.


However, the lab assured us that the unit was in full working order prior to removal. Therefore if you encounter any issues with the system we will offer you a full refund and cover return postage costs.

Items 1141 to 1160 of 2608