Items 1241 to 1260 of 3202

Image of item

£ POA 1 in stock

Fisons Growth Chamber Model - 600G3/TTL Lab

ITEM-20357

This Fisons Growth Chamber Model - 600G3/TTL was removed from a university lab where it was surplus to requirements.


The unit doesn't power up. We are unsure of the fault.


It is in reasonably good cosmetic condition with some marks from use.


Internal dimensions - D61 x W120 x H73cm




Image of item

£ 99.23 (ex. VAT) 1 in stock

Fisons Instruments VG Analytical 1007 Lab High Voltage 10kV 10000V Power Supply

ITEM-05094

This unit was removed from a lab during a clearout as surplus to requirements.


We have powered it on but not tested it further.


Image of item

£ POA 1 in stock

Fisons Model - 600G3/TTL Growth Chamber Lab Spares/Repairs

ITEM-20358

This Fisons Growth Chamber Model - 600G3/TTL was removed from a university lab where it was surplus to requirements.


The unit doesn't power up. We are unsure of the fault.


It is in reasonably good cosmetic condition with some marks from use.


Internal dimensions - D61 x W120 x H73cm


Image of item

£ POA 1 in stock

Fisons MSE Mistral 3000i Centrifuge w/ 3600rpm 750ml Swing Bucket Rotor Lab

ITEM-19906

This Fisons MSE Mistral 3000i Centrifuge was removed from a university lab where it was surplus to requirements.


The unit powers up and the centrifuge ran up to 3600rpm. The chiller was set to -20˚C and dropped to -22˚C on the display after about an hour. Our digital thermometer (not included) measured the temperature at -12˚C.


We set it to heat to 37˚C but it remained ambient.


Included with it are;


1 x MSE 4 x 750ml Windshield Rotor 43124-708 - Max RPM - 3600

2 x Beige Bucket adaptors for 6 x 50ml tubes

2 x Yellow Bucket adaptors for 7 x 50ml tubes


It is in reasonable cosmetic condition but has quite a few marks from use.


Image of item

£ 64.71 (ex. VAT) 1 in stock

Fisons WM/250/FP/2 WhirliMixer Vortex Mixer Lab

ITEM-15416

This Fisons WhirliMixer Vortex Mixer was removed from a university where it was surplus to requirements.


The unit powers up and appears to work as it should and is in good, used cosmetic condition. It has various marks and scrapes from use.


Image of item

£ POA 1 in stock

Fistreem Cyclon Water Purification System - Dioniser, Reservoir & Still Lab

ITEM-24651

This Fistreem Cyclon Water Purification System was removed from a university lab where it was surplus to requirements.


The system is made up of;


1x Fistreem Cyclon Water Still

Part No. WSC044.MH2.7

The unit powers on and is in good cosmetic condition.  The unit made a noise when it was switched on and it made a different noise when the 'clean' button was pushed.  The water condensers inside the unit are in good cosmetic condition and the glass boilers are in reasonable condition. There looks to be some residue inside. it was not tested further.


1x Fistreem Cyclon Dioniser

Model No. WSC901.PDB.9

It is in good cosmetic condition but was not tested. There is some chipped paint and surface rust along the bottom LHS of the unit from general use.


1x Fistreem Cyclon Reservoir

Model No. WSC900.RTB.9

It is in good cosmetic condition but was not tested. There is a 2 core cable, which we suspect should either have a 1/4" jack plug on it or a DIN plug.


Volume:

30L Capacity




Image of item

£ 1,572.18 (ex. VAT) 1 in stock

Flanders Absolute Isolation 8 Slot Dry Glove Box Lab - Refurbishment Needed

ITEM-16825

This Flanders Absolute Isolation 8 Slot Dry Glove Box was removed from a university lab where it was surplus to requirements.


The unit is in reasonable, used condition but it does have various signs of use. The stainless panels have quite a lot of sticker/tape residue.

It only has 4 out of 8 gloves currently fitted but there are two more in a box (totaling 6). Of the two in the box, one is sealed, the other looks used.


Quite a few of the ring seals/glove mounting rings are damaged and will need replacing. One of the main switches has been pushed inside the unit and the cover is missing from the start switch.


One of the gas struts from the main hatch is not fitted. It is inside the unit and appears to be seized and needs replacing, though the hatch does still open fine.


When powered up the internal light comes on and the main control panel lights up. We were not able to test any further.


This unit will require an overhaul and refurbishment prior to use. It is sold as spares/repairs on this basis.


The internal dimensions are:

172cm L x 95cm W x 87cm H.


Please enquire for options if you would like a delivery quote.

Image of item

£ POA 1 in stock

Flatters & Garnett Ltd Hand/Bench Microtome Lab

ITEM-18482

This Flatters & Garnett Ltd Hand/Bench Microtome was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition with only light marks from use. We have not tested it.


The unit comes supplied with a box and manual.

Image of item

£ POA 1 in stock

Flatters & Garnett Ltd Vintage Hand Microtome Lab

ITEM-18481

This Flatters & Garnett Ltd Vintage Hand Microtome was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition with light usage marks but has not been tested. It comes with a box.

Image of item

£ 57.74 (ex. VAT) 1 in stock

Flohr Industries A.12191.90 k110s Motor / Gearbox Lab

ITEM-09509

This unit was removed from a workshop store as surplus to requirements.

Image of item

£ POA 1 in stock

Flow Laboratories Gelaire BSB4 Laminar Air Flow Safety Cabinet Lab Spares/Repair

ITEM-19433

This Flow Laboratories Gelaire BSB4 Laminar Air Flow Safety Cabinet was removed from a university lab where it was surplus to requirements.


The unit has not been tested as a lot of wires behind the front cover are not connected. The plug has also been cut off from a failed PAT test. It will need some degree of refurbishment before it is to be used again.


It is in reasonably good cosmetic condition with marks from use.


Itc omes with a table. Size - W130 x L69 x H74cm

Internal dimensions - D61 x W116 x H65cm


It is sold for spares or repairs.

Image of item

£ 596.53 (ex. VAT) 1 in stock

Flow Visualisation Apparatus Mobile Bed Visualisation Tank - Aeronautical Lab

ITEM-15241

Flow Visualisation Apparatus Mobile Bed -Visualisation Tank Aeronautical Lab

From a top UK University.

Custom made by university Technicians.

In very good condition.

Tested and runs smoothly.


Image of item

£ POA 1 in stock

Fluidigm Biomark HD Genetic Analyser & IFC Controller HX with Accessories Lab

ITEM-18023

Fluidigm Biomark HD Genetic Analyser & IFC Controller HX with Accessories


This was removed from a university lab where it was surplus to requirements.


The units are all in good cosmetic condition with marks from use. Everything powers up. Starting up various programs did trigger the main unit to open its side door ready for a sample so it does appear that the PC and main unit are communicating. We believe the IFC Controller requires an ethernet cable and to be on the same network as the main unit for them to work together. We did not test the IFC working with anything else.


Lot contains:

1 x Fluidigm Biomark HD Genetic Analyser.

1 x Fluidigm IFC Controller HX.

1 x Dell Monitor.

1 x VGA Cable.

1 x Logitech Keyboard.

1 x USB Male to USB Female Cable.

1 x 9 Pin Male to 9 Pin Female Serial Cable (Not VGA).


We logged into the IFC Controller HX successfully.

Settings on controller say:

Serial No: HX-10641.

Chips Supported: 136, 138, 139, 153, 154.

Filmware Version: 53

Software Version: 2.7-2014-12-02.

Last System Check: 19/11/2021.


The PC built inside the Biomark HD Genetic Analyser has had the user data removed but the software remains


Fluidigm Software:

Genetic Analysis.

BioMarkICP

EP1

BioMark.






Image of item

£ 5,223.10 (ex. VAT) 1 in stock

Fluidigm C1 Single Cell Auto Prep System for MRNA Sequencing 100-7000 Lab

ITEM-16106

Fluidigm C1 Single Cell Auto Prep System for MRNA Sequencing


This unit was removed from a university laboratory where it was surplus to requirements.


The unit is in excellent cosmetic condition but has a couple of small scuffs.


It powers up and the sample tray opens and closes. It has not been tested further. We were however informed by the lab that it is indeed functional. It just hasn't been used in a couple of years.





Image of item

£ 5,442.35 (ex. VAT) 1 in stock

Fluidigm C1 Single-Cell Auto Prep System mRNA sequencing Lab

ITEM-09075

This system was removed from a lab as surplus to requirements.


It was in full working order prior to removal from the lab, but simply no longer required.

Image of item

£ 1,875.00 (ex. VAT) 1 in stock

Fluidigm Polaris Single-Cell Research System & Accessories Lab

ITEM-14876

This Fluidigm Polaris Single-Cell Research System was removed from a university where it was surplus to requirements.


Item powers up but shows a display error. 'No signal input'

We were unable to test it any further. It appears as though the internal PC is probably faulty.

All the internal fans power up, and the unit does power. We suspect that the 'no signal input' on the touch screen during startup is caused by the PC not booting however, we cannot be certain of this.

We tested the PC's output onto a different external monitor and had the same problem.

Note that two of the bolts for the side panel also appear to have been sheered off. This does not affect the unit as there were four holding the panel on.


The unit is in very good cosmetic condition and comes with extras.

Image of item

£ 746.56 (ex. VAT) 1 in stock

Fluidigm TPZ-FID TOPAZ Lab Benchtop High / Low Pressure Protein Crystallizer Lab

ITEM-14573

Fluidigm TPZ-FID TOPAZ Lab Benchtop High/Low Pressure Protein Crystallizer.


This item was removed from a lab as surplus to requirements.


We have powered up the unit but not tested it further.


Unit appears to be in good used cosmetic condition.


Please see photos for more details.

Image of item

£ 599.62 (ex. VAT) 1 in stock

FluidX XTR 96 LF Cryo Multi Tube Rack Scanner PN - 20-2206 Lab

ITEM-18084

This FluidX XTR 96 LF Cryo Multi Tube Rack Scanner was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further. It requires a 14V power supply which is not included.


It is in good cosmetic condition but has some marks from use.


It comes in original packaging box and includes:-

1 x USB Memory stick with the setup program on.

1 x Operating instructions manual


Image of item

£ 599.62 (ex. VAT) 1 in stock

FluidX XTR-96 96 Tube Rack Scanner & Software Lab

ITEM-19545

This FluidX XTR-96 96 Tube Rack Scanner was removed from a university lab where it was surplus to requirements.


The unit is in good used cosmetic condition. We have powered the unit up with our own 16v PSU (not included). The Green LED lights up and the internal parts move when powered. The Green LED lights up and the internal parts move when powered. The LED is hidden and our PSU would not plug in without this removed. We were unable to test it further.


Included in the set:


1 x Fluid X XTR 96 Tube Rack Scanner Unit.

1 x Manual.

1 x Fluid X 2008 Catalog.

1 x Fluid X XTR-96 Version 3.211 Software.


We have installed the software on our PC to test the unit. Unfortunately, we are missing the USB dongle so the software will not run.


Image of item

£ POA 1 in stock

Fluovac System Animal Anesthesia Gas Trap & Vetscav Weighing Mechanism Lab

ITEM-20372

Fluovac Vetscav Animal Anesthesia Gas Trap & Filter Weighing Mechanism


This was removed from a university lab where it was surplus to requirements.


Both units power up with a 12v DC power supply (not included) but have not been tested further.


They are in good cosmetic condition with some marks from use.

Items 1241 to 1260 of 3202