All Products

£ 800.00 (ex. VAT) 1 in stock

Advanced ChemTech Model 90 Peptide Synthesiser 90-CE Lab

ITEM-37387

Advanced ChemTech Model-90 Peptide Synthesis

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 800.00 (ex. VAT) 1 in stock

Thermo IEC Centra CL3-R Refrigerated Centrifuge - 4600rpm Lab

ITEM-18032

This Thermo IEC Centra CL3-R Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested. It is in good working order.

It is in reasonably good cosmetic condition with some marks from use.

The unit comes with;

1 x IEC 243 Rotor.

4 x 12-04 Thermo 51138 271.0G Buckets.

2 x Thermo Electron IEC 6562 140.0 GMS 02-06 Adaptors.

2 x Thermo Electron IEC 6566E 156.0G Adaptors.

The 6562 Adaptors have 8 wells that are 17.5mm in diameter and 100mm deep. The 6566E Adaptors have 58.5mm deep tube wells but extend to the top of the adapter making them 99mm deep.

£ 800.00 (ex. VAT) 1 in stock

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

ITEM-47241

Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Included;

6 x Sample Storage Racks.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Hitachi Sorvall Discovery M120 Refrigerated S/R Broken Motor Mount Lab

ITEM-47196

Sorvall Discovery M120 Floor-Standing Refrigerated Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, further testing was not possible due to the motor mount being broken.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 795.00 (ex. VAT) 1 in stock

Perkin Elmer Spectrometer LS 50 B Lab

ITEM-46254

Perkin Elmer Spectrometer LS 50 B

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but then started emitting a bad smell, suggesting a possible issue with the power supply.

Therefore, it is listed as Spares/Repair.

£ 790.00 (ex. VAT) 1 in stock

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-300 Printer

ITEM-48848

Shimadzu UV mini 1240 UV-VIS Spectrophotometer with Epson LX-300 Printer

This item was removed from a university laboratory where it was surplus to requirements.

Both units power on, but no further testing has been carried out at our facility.

The spectrophotometer shows some discolouration and rust to the rear panel.

Includes:

Epson LX-300 printer
Printer connection cable

£ 790.00 (ex. VAT) 1 in stock

Perkin Elmer 785A UV/VIS Detector Lab

ITEM-46247

PerkinElmer 785A UV/VIS Detector Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 790.00 (ex. VAT) 1 in stock

Thermo Spectronic Genesys 10 vis Visible Light Spectrometer Lab

ITEM-29797

This Thermo Spectronic Genesys 10 VIS Spectrometer was removed from a university lab where it was surplus to requirements.

This item powers on and is in good cosmetic condition, it has not been tested further.

£ 780.00 (ex. VAT) 1 in stock

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-300+II printer

ITEM-48850

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-300+II printer

This item was removed from a university laboratory where it was surplus to requirements.

Both units power on, but no further testing has been carried out at our facility.

The spectrophotometer unit has discolouring and the screen isn't very bright.

Includes:

Epson LX-300+II printer
Printer connection cable

£ 780.00 (ex. VAT) 1 in stock

Thermo Spectronic Model Genesys 10 vis Visible Light Spectrometer Lab

ITEM-29798

This Thermo Spectronic Genesys 10 VIS Spectrometer was removed from a university lab where it was surplus to requirements.

This item powers on and is in good cosmetic condition, it has not been tested further.

Lamp hours: 921.51

£ 770.00 (ex. VAT) 1 in stock

Shimadzu UV mini 1240 UV-VIS Spectrophotometer & Epson LX-300+ Printer Lab

ITEM-48851

Shimadzu UV mini 1240 UV-VIS Spectrophotometer & Epson LX-300+ Printer Lab

This item was removed from a university laboratory where it was surplus to requirements.

Both units power on, but no further testing has been carried out at our facility.

The spectrophotometer unit has discolouring.

Includes:

Epson LX-300+ Printer
Printer connection cable

£ 770.00 (ex. VAT) 1 in stock

Thermo Spectronic Model Genesys 10 VIS Spectrometer Lab

ITEM-29799

This Thermo Spectronic Genesys 10 VIS Spectrometer was removed from a university lab where it was surplus to requirements.

This item powers on and is in good cosmetic condition, it has not been tested further.

Lamp hours: 1041.35

£ 760.00 (ex. VAT) 1 in stock

Shimadzu UV mini 1240 UV-VIS Spectrophotometer and Epson LX-350 printer Lab

ITEM-48852

Shimadzu UV mini 1240 UV-VIS Spectrophotometer and Epson LX-350 printer Lab

This item was removed from a university laboratory where it was surplus to requirements.

Both units power on, but no further testing has been carried out at our facility.

The spectrophotometer unit has discolouring and the screen isn't very bright.

Includes:

Epson LX-350 printer
Printer connection cable

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific Orion VersaStar Pro Electrochemistry Meter w/ SNBC Printer

ITEM-49900

Thermo Scientific Orion VersaStar Pro Electrochemistry Meter with SNBC Printer

This system was removed from a facility where it was surplus to requirements.

Both units are in good cosmetic condition and power on, though the probes may require replacement.

Thermo Scientific Orion VersaStar Pro Advanced Electrochemistry Meter

S/N: 12527

SNBC BTP-M300 Receipt Printer

P/N: BTP-M300BSUBDLYE
S/N: 21036101612

£ 750.00 (ex. VAT) 1 in stock

Taylor Hobson Model K Pantograph Engraver 110.902.324

ITEM-48758

Taylor Hobson Model K Pantograph Engraver 110.902.324

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and appears to be in good working order.

There are various marks and signs of use.

£ 750.00 (ex. VAT) 1 in stock

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

ITEM-38018

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order, we are unable to test it fully at our facility.

This kit includes the following:

1 x main remote controller Model NDJ6 Serial No. MP1410CK003211

1 x thumb controller and guide booklet

1 x iPad mini 2 16GB model A1489 serial No. F9FQ4T3AFCM8 with charger and USB cable

1 x battery charger Model MDA10116803000

1 x camera base plate DJI R-001 for RED/ Canon/ Blackmagic/ Nikon

2 x batteries model No. 824380-3400mAh-14.8v

1 x USB cable

1 x power leads

1 x 3-axis small rig connector

2 x type A quick release mounts

1 x accessory kit - 3 x allen keys, 4 x screws, 1 x locking tool

1 x Ronin-M hard carry case

1 x user manual

1 x stand

£ 750.00 (ex. VAT) 1 in stock

Jun-Air Compressor Model 12-40

ITEM-43051

Jun-Air Compressor Model 12-40

This item was removed from a facility where it was surplus to requirement.

It powers on and is in very good condition with minimal wear. The unit was only powered on briefly, as the oil had been expelled. Therefore, no further testing was carried out.

Specifications:

Pressure: 12.2 bar
Minimum Operating Temperature: 10°C
Maximum Operating Temperature: 50°C

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

7 x Nine Hole Nose Poke Feeder Arrays (Mixed Brands) Cenes Cognition Paul Fray

ITEM-47690

7 x Nine Hole Nose Poke Feeder Arrays (Mixed Brands) Lab

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

Included;

2 x Cenes Cognition Nine Hole Nose Poke Feeder Arrays

2 x Paul Fray (Gray) Nine Hole Nose Poke Feeder Arrays

3 x Paul Fray (Wooden) Nine Hole Nose Poke Feeder Arrays

1 x Nine Hole Nose Poke Feeder Array without case

£ 750.00 (ex. VAT) 8 in stock

Vaisala GMP231 Carbon Dioxide Probe Lab

ITEM-46495

Vaisala Carbon Dioxide Probe

This item was removed from a facility where it was surplus to requirements.

This unit is in very good cosmetic condition, it is unclear whether it has been used. Testing has not been possible, so it is sold as seen.

Includes:

Vaisala GMP231 CO₂ Probe

Model: GMP231

£ 750.00 (ex. VAT) 1 in stock

41 pcs Rotary Evaporator Condenser Glassware Lab

ITEM-24212

41 x Pcs Rotary Evaporator Condenser Glassware

These were removed from a university lab where they were surplus to requirements.

All units are used but are in good, clean cosmetic condition.

Included are;

15 x 30cm x 7cm two inlets, two outlets

4 x 33cm x 7cm two inlets, two outlets

12 x 28cm x 3cm two inlets, two outlets

5 x 18cm x 6cm Linton 10ml separator traps six nozzles, three with taps, two without

4 x 15cm x 3.5cm through flasks with three nozzles

1 x 20cm x 6.5cm Quickfit MF29/3/250 wash bottle 250ml

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m

ITEM-42418

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 149 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m

ITEM-42459

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 154 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Eurotherm Chessell Model 6180A Paperless Graphic Recorder Lab

ITEM-42543

Eurotherm Chessell Model 6180A Paperless Graphic Recorder

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

Colour touchscreen display (30cm visible area, measured diagonally)
USB ‘plug & play’ support
Up to 48 universal inputs
Up to 96MB non-volatile Flash memory
125ms parallel sampling
Compact Flash or Secure Digital card compatibility
Modbus master
Ethernet TCP/IP connectivity

Model: 6180A

Serial No.: GB20917-1-1-3210-PL3 N11

£ 750.00 (ex. VAT) 1 in stock

Ametek PowerVar Sinergy III Model- ACDEF2000-22

ITEM-46464

Ametek PowerVar Sinergy III Model- ACDEF2000-22

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Ametek PowerVar Sinergy III Model ACDEF2000-22

ITEM-46465

Ametek PowerVar Sinergy III Model- ACDEF2000-22

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Tiertime UP300 Tiertime Melted Extrusion Modelling 3D Printer

ITEM-47609

Tiertime UP300 Tiertime Melted Extrusion Modelling 3D Printer

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, the client stated it was in good working order prior to removal.

Specifications;

Firmware Version - 359
Total Time - 519.5h
Model - 3DP-25-5A
S/N - 550047
FCC ID - 2AAHW-UP300

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 10 x Brunel SP27 Compound Microscopes Lab

ITEM-48559

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

All microscopes are in good cosmetic condition.

Each microscope includes;

1 x Carry Case

4 x Objectives:

4/0.10 160/-
10/0.25 160/-
40/0.65 160/0.17
100/1.25oil 160/0.17

£ 750.00 (ex. VAT) 1 in stock

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-350 Lab

ITEM-48853

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-350 Lab

This item was removed from a university laboratory where it was surplus to requirements.

Both units power on, but no further testing has been carried out at our facility.

The spectrophotometer unit has discolouring and the screen isn't very bright.

Includes:

Epson LX-350 printer
Printer connection cable

£ 750.00 (ex. VAT) 1 in stock

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-350 printer

ITEM-48854

Shimadzu UV mini 1240 UV-VIS Spectrophotometer W/ Epson LX-350 Lab

This item was removed from a university laboratory where it was surplus to requirements.

Both units power on, but no further testing has been carried out at our facility.

The spectrophotometer unit has discolouring and the screen isn't very bright.

Includes:

Epson LX-350 printer
Printer connection cable

£ 750.00 (ex. VAT) 1 in stock

Woodway PPS 70 med-1 Treadmill Ergometer

ITEM-50500

Woodway PPS 70 Med Treadmill Ergometer

This item was removed from a university facility where it was surplus to requirements.

The treadmill powers on and is in good overall cosmetic condition with minimal wear.

The previous owner reported that the treadmill is fully working but will very occasionally switch itself off and require a restart. This happens infrequently, sometimes with months between occurrences.

We found no issues in testing.

The treadmill has been serviced annually, with the most recent service carried out in June 2025.

Includes:

Treadmill unit

Integrated control panel

Specifications:

Model: PPS 70 Med-I

Serial Number: 12101 0208

Min Speed: 0 km/h

Max Speed: 20 km/h

Min Incline: 0%

Max Incline: 20%Woodway PPS Med 70 Treadmill Ergometer

£ 750.00 (ex. VAT) 1 in stock

Perkin Elmer Fluorescence 204 Spectrophotometer Analyser Laboratory Equipment

ITEM-06749

This was removed from a university lab where it was surplus to requirements

The unit powers up but has not been tested further.

It is in reasonably good cosmetic condition with minor marks.

£ 750.00 (ex. VAT) 1 in stock

43 x Illumina HiSeq Reagent Racks - Mixed Sizes Lab

ITEM-40998

43 x Illumina HiSeq Reagent Racks - Mixed Sizes

These were removed from a university lab where they were surplus to requirements.

The units are in good cosmetic condition with minor marks.

Included are;

24 x Racks that hold 8 x 6cm diameter tubes

19 x Racks that hold 20 x 12ml tubes

£ 750.00 (ex. VAT) 1 in stock

Panlab Harvard Apparatus Load Cell Coupler LE 111 & Shocker LE 100-26 Lab

ITEM-39742

Panlab Harvard Apparatus Load Cell Coupler LE 111 & Shocker LE 100-26

These units were removed from a university lab where they were surplus to requirements.

Both units power up but have not been tested further. They are in good cosmetic condition with minor marks.

Included are;

Panlab Harvard Apparatus Load Cell Coupler LE 111

Model: Load Cell Coupler LE 111

Serial#: 775509

Panlab Harvard Apparatus Shocker LE 100-26

Model: Shocker LE 100-26

Serial#: 775609

£ 750.00 (ex. VAT) 1 in stock

GE SuperFrac Fraction Collector Lab

ITEM-49996

GE SuperFrac Fraction Collector Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; There is no PC or Software include.

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab

ITEM-50356

Beckman Coulter Biomek 2000 Laboratory Automation Workstation

This item was removed from a laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition.

Please note: The plastic trays within the working area show signs of use and appear to be slightly warped.

The item powers on, however we are unable to test it further at our facility.

NEW ITEM

£ 750.00 (ex. VAT) 1 in stock

Sartorius Stedim 16374 Calibration Kit & Specially Designed Holder for BioWelder

ITEM-36493

Sartorius Stedim 16374 Calibration Kit & Specially Designed Holder for BioWelder

This was removed from a working lab where it was surplus to requirements.

We believe it is new and unused.

£ 750.00 (ex. VAT) 1 in stock

UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05 Lab

ITEM-31863

UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05

This item was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use.

It is in full working order.

Included with it is;

1x Canon Powershot G10 Digital Camera

S/N: 7188100663

£ 750.00 (ex. VAT) 1 in stock

RS Components Stainless Steel Vacuum Bellows UHV Ultra-High Vacuum

ITEM-50220

Stainless Steel Vacuum Bellows - RS Components

This item was removed from a facility where it was surplus to requiremet.

It is in good cosmetic condition and remains untested.

£ 750.00 (ex. VAT) 1 in stock

Pfeiffer Turbomolecular Pump TMH-261-250-030 P X, TVF 005 & TC 600 Controller

ITEM-36066

Pfeiffer Turbomolecular Pump TMH-261-250-030 P X, TVF 005 & TC 600 Controller

All parts included:

Pfeiffer Turbo Pump

Model: TMH-261-250-030 P X

Model#: PM P03 168 I

Serial#: 15519320

Item is in near perfect condition with no signs of damage. It has not been tested at our facility.

Pfeiffer Vent Valve

Model: TVF 005, 24V DC

Model#: PM Z01 135 H

Item is in very good condition with no signs of damage.

Additional items included:

Control box with 4 ports, no serial number or model.

Pfeiffer Manuals

£ 750.00 (ex. VAT) 1 in stock

Surgipath Medical 04502GFS-240 Premier Cooling Plate Lab

ITEM-39973

This Surgipath Medical 04502GFS-240 Premier Cooling Plate was removed from a university lab where it was surplus to requirements.

The item powers on and is in a reasonably used cosmetic condition.

It is in good cosmetic condition.

Work platform cooled to: –10ºc

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall Discovery 100SE Refrigerated Floor Standing Centrifuge Lab Spares/Repair

ITEM-29790

Sorvall Discovery 100SE

This was removed from a university lab where it was surplus to requirements.

The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside.

It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage.

It is sold for spares/repairs.

£ 750.00 (ex. VAT) 1 in stock

Acquity Ultra Performance LC 2996 PDA Detector Lab

ITEM-41571

Acquity Ultra Performance LC 2996 PDA Detector Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition overall.

Please note: The plastic casing is cracked as displayed, though this appears to be cosmetic and does not affect functionality.

£ 750.00 (ex. VAT) 1 in stock

Olympus U-SWTR-2 Trinocular Observation Tube w/ 2 x Olympus SWH10X-H/26.5 Lab

ITEM-46326

Olympus U-SWTR-2 Trinocular Head with Eyepieces

This item was removed from a university laboratory where it was surplus to requirements.

The item is in good cosmetic condition. It comes fitted with 2 x Olympus SWH10X-H/26.5 high-eyepoint eyepieces.

Includes:

Olympus U-SWTR-2 Trinocular Head
2x Olympus SWH10X-H/26.5 Eyepieces

£ 750.00 (ex. VAT) 1 in stock

LabCraft N2 Generator Model NCS 016 R

ITEM-50601

LabCraft N2 Generator (NCS 016 R)

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on. We are unable to test it further at our facility.

612930 Hours

LabCraft N2 Generator

Model: NCS 016 R
Serial Number: 98 90000115
Run Hours: 61,293.0
Flow Rate: 3 l/min
Max Pressure: 9 bar
Operating Temperature: +5°C to +45°C

£ 750.00 (ex. VAT) 1 in stock

Binder CO2 Incubator Series CB CB 150 Lab

ITEM-29765

This Binder CO2 Incubator Series CB CB 150 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but the screen flickers quite a bit. It is readable and usable.

It was tested with a temperature and CO2 sensor (not included).

Internal dimensions are: L44cm x W49cm x H60cm.

£ 750.00 (ex. VAT) 1 in stock

Scanbur Scantainer Cabinet Model 50-SCNT-1-110 - Animal Welfare Lab

ITEM-42841

Scanbur Scantainer Cabinet Model 50-SCNT-1-110

This item was removed from a university laboratory where it was surplus to requirements.

The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.

The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light remained illuminated even at maximum fan speed—likely due to a blocked or saturated inlet filter on the bottom panel.

No further functionality testing was conducted.

Includes:

5 internal shelves (138 x 43cm)
4 lockable castors
Integrated fan system
Flange for optional extraction duct

Model: 50-SCNT-1-110

Cabinet Serial No.: 08064

Extractor Serial No.: 08075

£ 750.00 (ex. VAT) 1 in stock

Scanbur Scantainer Cabinet Model 50-SCNT-1-110 Lab Animal Welfare

ITEM-42844

Scanbur Scantainer Cabinet Model 50-SCNT-1-110

This item was removed from a university laboratory where it was surplus to requirements.

The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.

The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light illuminated when the fan speed was turned to half speed and lower.—likely due to a blocked or saturated inlet filter on the bottom panel.

No further functionality testing was conducted.

Includes:

5 internal shelves (138 x 43cm)
4 lockable castors
Integrated fan system
Flange for optional extraction duct

Model: 50-SCNT-1-110

Cabinet Serial No. 08066

Extractor Serial No. 08079

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

ITEM-46523

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably poor cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

ITEM-47673

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

ITEM-37620

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

These were removed form a university lab where they were surplus to requirements.

The units are all in good working order.

All Products

Filters