All Products

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Waters Alliance HT 2795 Separations Module w/ 2 x Selector Valves

ITEM-54645

Waters Alliance HT 2795 Separations Module with Selector Valve & Switching Valve

These items were removed from a facility where they were surplus to requirements.

The Waters Alliance HT 2795 Separations Module powers on, the fans run, and the unit sounds as though it is operating. However, the display screen is not functional and only shows horizontal lines, as shown in the photos.

Due to the faults noted above, no further testing has been carried out and the items are being sold as spares or repairs.

£ 1,000.00 (ex. VAT) 1 in stock

Edwards Diffstak Model 100/300 Oil Diffusion Pump

ITEM-51401

Edwards Diffstak Model 100/300 Oil Diffusion Pump

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

£ 1,000.00 (ex. VAT) 1 in stock

Edwards Diffstak 100-300 Oil Diffusion Pump

ITEM-51400

Edwards Diffstak 100-300 Oil Diffusion Pump

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

£ 1,000.00 (ex. VAT) 1 in stock

GE Healthcare / Cytiva S-2000 - Centrifuge/Therm. Module Lab

ITEM-38168

GE Healthcare / Cytiva S-2000 - Centrifuge/Therm. Module Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent condition, we are unable to test it further due to the nature of the item.

Item No/Product Name: 8800.

O/Part No: 851 1332.

Serial No: 239529.

£ 1,000.00 (ex. VAT) 1 in stock

Baker Hypoxycool Culture Media Hypoxia Conditioner Lab

ITEM-37960

Baker Hypoxycool Culture Media Hypoxia Conditioner

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility.

Internal dimensions 38 x 38 x 30cm (LxWxH)

£ 1,000.00 (ex. VAT) 1 in stock

Bioquell H2O2 Decontamination System Z-2 & R-10 Lab

ITEM-36942

Bioquell H2O2 Decontamination System Z-2 & R-10

This was removed from a university lab where it was surplus to requirements.

The lab confirmed they were fully working prior to removal.

Included are the following;

Bioquell Z-2

Model no. TD068-0000-230V

SN - 201104BZ21160

(5L Container inside is empty)

Hours run - 59

A warning for calibration due came up, was due 14/07/23

Bioquell R-10

Model no. TD060-5900-230V

SN - 201106BR1253

Both units power on and are in good used cosmetic condition.

£ 1,000.00 (ex. VAT) 1 in stock

Neslab Cryocool Immersion Cooler CC-100 II Lab

ITEM-35995

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 1,000.00 (ex. VAT) 1 in stock

Neslab Cryocool CC-100 II Immersion Cooler Lab

ITEM-35994

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

£ 1,000.00 (ex. VAT) 1 in stock

Millipore Mobius FlexReady System CL-2 POD - MPODPILOT - MBSCB002D

ITEM-35826

Millipore Mobius FlexReady System CL-2 POD - MPODPILOT - MBSCB002D

This was removed from a university lab where it was surplus to requirements.

Millipore Mobius FlexReady System CL-2 POD Cart with Drawer

Model: MPODPILOT

Cat#: MBSCB002D

Serial#: F4DA03789

Year: 2014

The unit is in excellent cosmetic condition but has not been tested.

£ 1,000.00 (ex. VAT) 1 in stock

Varian Turbo-V Model 250 Macro Torr Pump w/ Multi Gauge Controller System Lab

ITEM-34859

Varian Turbo-V 250 Macro Torr Pump System

This system was removed from a university where it was surplus to requirements.

It includes a Varian Turbo-V 250 Macro Torr Pump, which is in good cosmetic condition with blades that move freely. The Multi-Gauge controller powers on but displays an error E03, but this is just because it is not connected to anything.

The system comprises the following:

1 x Varian Turbo-V 250 Macro Torr Pump: Model no. 9699008S016
1 x Multigauge controller: Part no. V209600
1 x Turbo-V 250 Controllers Instruction manual: Model 969-9423, 969-9523, 969-9425
1 x Turbo- V 250 Pumps Instructional manual: 969-9007 Series, 969-9008 Series
1 x Multigauge Controller Instruction manual: Part no. L8350301
1 x Multigauge RS232 Board instruction manual: Part no. L6439309
All cables shown in the images are included.

Power supply not included.

£ 1,000.00 (ex. VAT) 1 in stock

Applied Biosystems QuantStudio 12K Flex Accufill System Lab

ITEM-24415

Applied Biosystems QuantStudio 12K Flex Accufill System

This was removed from a university lab where it was surplus to requirements.

The powers up but has not been tested further at our facility. The lab confirmed that it was in working order before it was put into storage.

It is in excellent cosmetic condition with marks from use.

Included with it are;

1x Box of Open Array 384 well sample plates (opened)

Part no. 4406947

10Pk

The plates are still inside a sealed bag and are in good cosmetic condition.

1x Open Array Acufill User guide:

The unit is in good cosmetic condition and appears to be complete.

Cables:

2x USB A to USB B cables:

The units are in good cosmetic condition.

1x Blue ethernet cable:

REV C 4379889

£ 1,000.00 (ex. VAT) 1 in stock

Applied Biosystems OpenArray Accufill Instrument Model 3072 PCR System Lab

ITEM-24414

Applied Biosystems OpenArray Accufill Instrument Model 3072 PCR System

This was removed from a university lab where it was surplus to requirements.

The powers up but has not been tested further at our facility. The lab confirmed that it was in working order before it was put into storage.

It is in excellent cosmetic condition with marks from use.

RECERTIFIED ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Priorclave EV100 Top-Loader Autoclave Lab

ITEM-21247

Priorclave EV100 Top-Loader Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A full report is available on request.

It is in good cosmetic condition with minor marks.

£ 1,000.00 (ex. VAT) 1 in stock

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837 Lab

ITEM-47367

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility.

The lab reported it was in good working condition prior to removal

£ 1,000.00 (ex. VAT) 1 in stock

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837

ITEM-47368

Watson Marlow/Sartorius Stedim Peristaltic Pump Type BB-34161837 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility.

The lab reported it was in good working condition prior to removal

£ 1,000.00 (ex. VAT) 1 in stock

Leitz Labovert FS Microscope w/ 4 x Objectives PHACO 4x/10x/20x/32x Lab

ITEM-47409

Leitz Labovert FS Microscope

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in good cosmetic condition overall, with some surface marks from general use.

All mechanical and optical components function as intended.

Please note that a slide holder is not fitted to the stage.

Includes:

1 x Leitz EF4/0.12 160/- objective
1 x Leitz EF L20/0.30 PHACO 1a 160/1.5 objective
1 x Leitz EF L32/0.40 PHACO 1a 160/1.5 objective
1 x Leitz EF L10/0.25 PHACO 1a 160/- objective
2 x Leitz PERIPLAN 10x/18 eyepieces

£ 1,000.00 (ex. VAT) 1 in stock

Nikon Optiphot Microscope w/ Microflex HFX-II & FX-35A Attachments

ITEM-50298

Nikon Optiphot Microscope with Microflex HFX-II & FX-35A Photo Attachments

This item was removed from a facility where it was surplus to requirements.

The microscope is in very good condition for its age and appears to have been carefully maintained.

The focusing wheels lift and lower the stand but are very stiff, suggesting the mechanism would benefit from cleaning and re-greasing.

All objectives and eyepieces were tested using a sample slide and produced clear images.

The camera system fires, rewinds, and responds correctly to controls on the HFX-II, including the handheld switch and timer. No further testing has been carried out.

Included Components:

Nikon Optiphot Microscope

S/N: 120158

Nikon Microflex HFX-II

S/N: 241341

Nikon FX-35A Camera Back

S/N: 7586982

2 × Original manuals (Optiphot and Microflex HFX)

Eyepieces:

CFW10x and CFW10xM (fitted)
Spare CF PL 2.5x
Spare CFW10x

Accessories:

3 × new boxed Thorn projector lamps
7 × Nikon objective holders with dust caps
6 × filters
Nikon Type 104 cover

Objectives Included:

Plan 2/0.05 160/– (stored in holder)
Plan 4/0.10 160/–
Plan 10/0.25 160/–
Plan 20/0.40 160/0.17
Plan 40/0.65 160/0.17
Plan 100/1.25 Oil 160/0.17

£ 1,000.00 (ex. VAT) 1 in stock

ION Torrent PGM Unit With ION OneTouch 2 Unit And ION OneTouch ES Unit Lab

ITEM-46340

ION Torrent PGM Unit With ION OneTouch 2 Unit And ION OneTouch ES Unit Lab

This system was removed from a university laboratory where it was surplus to requirements.

The units included are in good cosmetic condition and power on, but further testing at our facility was not possible.

According to the previous owner, the system was operational when last used; however, that was over eight years ago.

Includes:

ION Torrent PGM
ION OneTouch 2
ION OneTouch ES

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Bespoke MoFlo Optical Table Bench Imperial 153x122x80cm (LxWxH)

ITEM-46809

Beckman Coulter MoFlo Optical Bench Imperial 153x122x80cm (LxWxH)

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

This purpose built Optical Table was removed from a Beckman Coulter MoFlo system.

£ 1,000.00 (ex. VAT) 1 in stock

LUDL Microscope Stage w/Controller/Filter Wheel/Prior Keypad & Controller

ITEM-44702

LUDL Electronic Products MAC22 Controller System with Accessories

These items were removed from a university lab, where they were surplus to requirement.

All included items are in good cosmetic condition, power status where applicable is stated below.

Included is the following:

LUDL Electronic Products MAC22 Automatic Controller
7-inch enclosure
Part No.: 73002001
Serial No.: 122330
Status: Powers on

LUDL 6-Position Filter Wheel
Part No.: 99A075
Serial No.: 119374

LUDL Stage
Part No.: 99S008-N23-NE
Serial No.: 127742

Prior Scientific Orbit Piezo Drive Controller

Model Type: HPIEZO
Serial No.: 25389
Status: Powers on with included 24V power supply

Ecopac 24V Power Supply
Model No.: SA60-24V

Prior Scientific Instruments Orbit CS100K Filter Wheel Keypad

Keyspan USB Dual Port Converters/Adaptors
Quantity: 2
Part No.: USA-28X B

Cables
2 x RS232 Cables labeled 'Stage X & Stage Y Ludl'
1 x Cable labeled 'Ludl RS232 Scope 4'
1 x Cable labeled 'To RS232 on Ludl 3'

£ 1,000.00 (ex. VAT) 1 in stock

Zeiss Supra 55 VP SEM Detectors Scanning Electron Microscope Lab

ITEM-50422

Zeiss Supra 55 VP SEM Detectors – Scanning Electron Microscope Lab

These detectors were removed from a facility where they were surplus to requirement.

They are in good cosmetic condition with minimal wear.

Their working state is unknown.

There is no available information online regarding these specific detector models, a.nd no serial numbers are present on the units, although we know they were removed from a Zeiss Supra 55 VP SEM system.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

21 x Amersham Pharmacia LKB Novaspec II Spectrophotometer Lab

ITEM-37278

21 x Amersham Pharmacia LKB Novaspec II Spectrophotometer Lab

This job lot of items come from a university, where they were surplus to requirement.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

£ 1,000.00 (ex. VAT) 1 in stock

Varian CC2C Module Model Sentorr Vacuum Gauge Controller Lab

ITEM-45019

Varian CC2C Module Model-Sentorr

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Specifications:

Model: Sentorr
Serial No.: LID30427

£ 1,000.00 (ex. VAT) 1 in stock

Perkin Elmer Flexar Solvent Manager 5-CH Degasser Lab

ITEM-47138

Perkin Elmer Flexar Solvent Manager 5-CH Degasser Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The power supply is included.

£ 1,000.00 (ex. VAT) 1 in stock

Edwards Speedivac Vapour Diffusion Pump EO2 Rig w/ Pressure Gauge

ITEM-47652

Edwards Speedivac Vapour Diffusion Pump EO2 Rig w/ Pressure Gauge

This item was removed from a university where it was surplus to requirement.

It is in good overall cosmetic condition, we are unable to test it at our facility.

The previous owner stated it is in good working order.

£ 1,000.00 (ex. VAT) 1 in stock

Edwards Diffstak 160 Vapour Diffusion Pump Rig w/ Pressure Gauge

ITEM-47653

Edwards Diffstak 160 Vapour Diffusion Pump Rig w/ Pressure Gauge

This item was removed from a university where it was surplus to requirement.

It is in good overall cosmetic condition, we are unable to test it at our facility.

The previous owner stated it is in good working order.

Please note: There is no plug attached.

£ 1,000.00 (ex. VAT) 1 in stock

Packard Cobra II Gamma Counter Model D5010 System Lab

ITEM-36504

Packard Cobra II Gamma Counter Model D5010 System Lab

This system was removed from a university lab, where it was surplus to requirements.

All included units are in good cosmetic condition and powered on.

The system is fully functional, and the PC powered on successfully. The software and syringe runners are operational, though the system requests a printer connection. Overall, the system is ready for use and in working order.

Also included are the following;

1x Dell Monitor M

M/N: E773s

S/N: MY-OY1352-47603-4B4-B7T3

9x Syringe type tubes

1x Keyboard PS2

1x Bag of plastic tips

3x Plastic tip holders

5x Plastic lids

2x VGA type cables

2x Power leads

1x Power lead adaptor

2x Metal hook fixtures

2x 2 amp fuses

1x 15 amp fuse

1x Length of plastic tubing

1x bag of of metal hook fixtures

2x Thin wired VGA type connectors

6x Pipe connectors

1x Box of thin glass tubes (x5)

2x Boxes of assorted fixtures and fittings

1x Force Sensor (capteur de force)

M/N: ELJ-S045C-35G

S/N: R04074

1x Floppy Disc Cobra II Backup

£ 1,000.00 (ex. VAT) 1 in stock

Genevac Boc Edwards Scroll Pump Model XDS 5

ITEM-48654

Genevac Boc Edwards Scroll Pump Model XDS 5

This item was removed from a facility where it was surplus to requirements.

It powers up successfully and is in good cosmetic condition.

Please note: This pump requires a signal from the evaporator to operate, though it can be manually bypassed by unplugging the signal connection. It can then be powered and tested using a standard IEC cable.

Model: XDS 5

£ 1,000.00 (ex. VAT) 1 in stock

Sanyo Fistreem WDA300.RWI 5 AquaRee Water Purification Systems UV Lab

ITEM-40023

Fistreem AquaRee Water Purification Systems UV Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 1,000.00 (ex. VAT) 1 in stock

Minebea Intec Combics 2 CAW2S1-30ED-I Explosion Proof Weighing Scale Lab

ITEM-44657

Minebea Intec Combics 2 CAW2S1-30ED-I Weighing Scale Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and is in good working order. (Calibration weights are not included)

Model - CAW2S1-30ED-I

S/N -35566690

£ 1,000.00 (ex. VAT) 1 in stock

Minebea Intec Combics 2 Model-CAW2S1-30ED-I Weighing Scale Lab

ITEM-44659

Minebea Intec Combics 2 CAW2S1-30ED-I Weighing Scale Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and is in good working order. (Calibration weights are not included)

Model - CAW2S1-30ED-I

S/N -35566690

£ 1,000.00 (ex. VAT) 1 in stock

Zeiss Axioskop EL-Einsatz Microscope Lab

ITEM-44925

Zeiss Axioskop EL-Einsatz Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This microscope does not include any objectives, it was tested with an in-house Achrostigmat 10x /0.25.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Zeiss ConfoCor 2, LSM510, APD Module Meta System Parts Faulty Lab

ITEM-45164

Zeiss ConfoCor 2/LSM510 Meta System Parts Faulty Lab

These items were removed from a university lab where they were surplus to requirements.

Due to the casing being removed from the ConfoCor 2/LSM510 we are unsure of its operational capabilities and therefore, are unable to conduct any further testing.

All other remaining parts are also untested, and therefore, are sold as Spares/Repair.

This system features a Class III Laser.

Included is the following:

1 x Zeiss ConfoCor 2

1228-790

1 x LSM510 Meta

1228-919

Channel 2

1133-991

Channel 3

1140-340

1 x APD Module

1056-471

1 x Andor/Micro Point 2205

Laser Illumination and Ablation System.

1 x Remote Control Switch

2 x System Interface Plates for an AxioVert 200M.

These allow the ConfoCor & LSM to interface with an AxioVert 200M Microscope.

Various connection cables.

NEW ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Vacutech Cryo Arm Lab

ITEM-45169

Vacutech Cryo Arm Lab

This item was removed from a university lab where it was surplus to requirement.

It is in excellent condition, we are told it is brand new.

£ 1,000.00 (ex. VAT) 1 in stock

Varian Cary Fibre Optics Coupler Lab

ITEM-45319

Varian Cary Fibre Optics Coupler

This item was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition and is housed in a protective box. Unable to test for operational status.

Includes:

Phillips screwdriver
Small spanner

Serial No.: 94081255

£ 1,000.00 (ex. VAT) 1 in stock

J&M Tidas 8xout/8xin/rs422 Microscopic Spectrometer Lab

ITEM-45379

J&M Tidas 8xout/8xin/rs422 Microscopic Spectrometer

This item was removed from a university where it was surplus to requirements.

This item is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Specifications:

Model: 8xout/8xin/rs422
Serial No.: 2003-25804

Included:

Imaging Source DFK 41AFO2 Camera
JM 026065 Filter Housing
JM 025865 Filter Housing
Light source connection

£ 1,000.00 (ex. VAT) 1 in stock

PTI F10S-6x500 10,000RPM Rotor Lab

ITEM-45557

PTI F10S-6x500 10,000RPM Rotor Lab

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in good cosmetic condition but has not been tested further.

Specifications:

Rotor Speed: 10,000 RPM
Capacity: 6 x 500 ml test tube holders
Serial No.: 60628

£ 1,000.00 (ex. VAT) 1 in stock

Tecan Te-Flow 48 Position Rack Chamber 48 Pos. TE-Flow Lab

ITEM-47222

Tecan Te-Flow 48 Position Rack Chamber 48 Pos. TE-Flow Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 1,000.00 (ex. VAT) 1 in stock

Deben Cool Stage LEO-1400VP for Scanning Electron Microscope Lab

ITEM-50417

Deben Cool Stage LEO-1400VP for Scanning Electron Microscope Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

This item was removed from a ZEISS SUPRA 55 Scanning Electron Microscope systen. it was working when last used.

£ 1,000.00 (ex. VAT) 1 in stock

MTI Corporation MSK-AFA-L800-H Automatic Thick Film Coater

ITEM-50826

MTI Corporation MSK-AFA-L800-H Automatic Thick Film Coater

This item was removed from a university where it was surplus to requirements.

The unit is in good cosmetic condition with typical signs of previous laboratory use. It powers on, however we are unable to test the system further at our facility.

The previous owner stated the unit was working, but it was only used once as it was too large for their application. They also noted that the blade may be missing.

The system was reportedly used for fuel cell work, specifically with carbon paper substrates.

No further testing has been carried out.

£ 1,000.00 (ex. VAT) 1 in stock

Erlab Captair Bio 320 Ductless PCR Workstation UV Timer Cabinet 2018

ITEM-51210

Erlab Captair Bio 320 Ductless PCR Workstation UV Timer Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Please Note: There is damage to the right hand port.

Dimensions;

External length (cm) 82
External width (cm) 63
External height (cm) 65

Internal length (cm) 76
Internal width (cm) 46
Internal height (cm) 40

RECERTIFIED ITEM

£ 1,000.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S 200 Incubator CO2 Lab

ITEM-51447

RS Biotech Galaxy S 200 Incubator CO2 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 1,000.00 (ex. VAT) 1 in stock

CAS HLF 1200 Horizontal Laminar Flow Cabinet 120x75x130 cm Lab

ITEM-51573

CAS HLF 1200 Horizontal Laminar Flow Cabinet 120x75x130 cm Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility. (Socket tester not incuded.)

The previous owners stated it was in working order prior to removal.

Dimensions;

External length (cm) 120
External width (cm) 75
External height (cm) 130

Internal length (cm)110
Internal width (cm)50
Internal height (cm)73

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter JS-5.3 Centrifuge Swing-Out Rotor w/ 4 x JS 5.3 Buckets Lab

ITEM-46888

Beckman Coulter JS-5.3 Centrifuge Rotor w/ 4 x JS 5.3 Rotor Buckets Lab

This items was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, it has not been tested.

Included;

4 x JS 5.3 Rotor Bucket

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Clearbridge BioMedics ClearCell FX1 Cell Retrieval System Lab

ITEM-31211

Clearbridge BioMedics ClearCell FX Cell Retrieval System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but is showing various historic faults from when it had been run previously. The client informed us it had a fault but were unable to confirm exactly what.

It is in good cosmetic condition with minor marks.

There are 2 x 50ml tubes fitted, a CTChip FR1S & bottle holder included.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Cytiva Xcellerex XDR-10 SLAVE MAX Benchtop Bioreactor System

ITEM-47310

Cytiva Xcellerex XDR-10 SLAVE MAX Benchtop Bioreactor System

This system was removed from a university laboratory where it was surplus to requirements.

The system is in good cosmetic condition and powers on, however, the main unit has failed a PAT on insulation.

Therefore, we are unable to test the system further, and it is listed as Spares/Repair.

The system comprises the following:

1 x Cytiva Xcellerex XDR-10 SLAVE MAX Benchtop Bioreactor Controller
1 x Cytiva Xcellerex XDR-10
1 x Mettler Toledo PBA655-B60 Weighing Platform

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Gerhardt Soxtherm Type 07-5101 Rapid Extraction System Lab

ITEM-48542

Gerhardt Soxtherm Rapid Extraction System - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably poor cosmetic condition, and does not include the power supply.

Therefore, we are unable to power it on to test it further, and it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Molecular Devices ImageXpress Micro Parts / Lot Lab

ITEM-48762

Molecular Devices ImageXpress Micro Parts / Spares Lot – Lab

This item was removed from a laboratory environment where it was surplus to requirements.

This is not a complete working unit, it is a collection of parts and spares from a Molecular Devices ImageXpress Micro system.

The main unit is incomplete with multiple components missing.

Included parts:

1 × Molecular Devices ImageXpress Micro (incomplete, parts missing)
1 × Dover 12-1377 stage
1 × Del-Tron objectives carrier
1 × USB dongle for MetaXpress
1 × PSU
1 × Sutter Instruments LBLS-462
3 × unit panels

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Zeiss AXIO Observer .Z1 Confocal Microscope Lab

ITEM-51805

Zeiss AXIO Observer .Z1 Confocal Microscope Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

The microscope is in very good cosmetic condition, it powers up with a working screen, and although the nosepiece moves, it does not appear to home correctly (previously reported as affected by objective oil ingress)

There may be additional faults, no power supply is included, and only the items shown in the images are supplied.

Due to this it is listed as Spares/Repair

This microscope was removed from a Zeiss LSM confocal system.

£ 1,000.00 (ex. VAT) 1 in stock

Spectron Laser Systems Model SL401 Class IV Laser

ITEM-52692

Spectron Laser Systems Model SL401 Class IV Laser

This system was removed from a facility where it was declared surplus to requirements.

The unit is in good cosmetic condition. Due to safety restrictions associated with testing Class 3+ lasers at our facility, we are unable to power on or test the system.

Please note that the system was originally hardwired and was received without a mains plug attached.

The previous owner advised that the system was in working order prior to removal.