Items 1841 to 1860 of 3423

Image of item

£ 15.00 (ex. VAT) 1 in stock

Lab Tubing Control Board Gas Water Fluid Teaching Chemistry

ITEM-10016

This board was removed from a lab as surplus to requirements.


We have not tested the unit.

Image of item

£ 131.62 (ex. VAT) 1 in stock

Lab Yellow / Hazardous Chemical Cabinet

ITEM-09388

This unit was removed from a lab as surplus to requirements.


It appears to be in good condition.

Image of item

£ 32.15 (ex. VAT) 1 in stock

Lab-Line Instruments Multi-Blok Heater # 2093 115V 200W w/ 3 Blocks Working Lab

ITEM-04300

This Lab-Line Instruments Multi-Blok Heater Model no 2093 was removed from a working Lab in a top UK University.  It has 2 x 20 well blocks and 1 x 12 well block.  It has a High and Low heat setting with individual variable heat controls.  The heater easily reached 60°C when tested.  


The unit is fitted with an American style plug (115V) and a transformer or adapter is NOT included.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Lab-Quatec Gastorr GT-103 Degasser Lab HPLC

ITEM-15303

This Lab-Quatec LABOC Gastorr GT-103 Degasser was removed from a laboratory during a clearance.


The lab informed us it was working when last used.


The unit powers up and it sounds like the pump is working, it however has not been tested any further than this. It's in good condition but shows some signs of use.



Image of item

£ 96.65 (ex. VAT) 1 in stock

LabCaire Aura 750E Filter Fume Cupboard Hood / Fume Cabinet Lab - Spares Repair

ITEM-15891

This LabCaire Aura 750E Fume Hood/Fume Cabinet was removed from a laboratory due to a fault.


The lab reported that it was no longer pulling air through and they did not know why - so it was sold as spares / repairs.


The cabinet is in heavily used, cosmetic condition and the fibreglass of the working tray is exposed in a few places. The stand also has quite a few surface rust marks although most of this will clean off. The perspex front is also slightly broken.


The fume hood itself is in reasonable, used condition and it powers up. The fans run and the lights work, but it will need filters.


Please enquire if you would like a shipping quote.

Image of item

£ 101.25 (ex. VAT) 1 in stock

LabCold SLIP-0150 Floor-Standing Blood Monitor Freezer Incubator -8.8C

ITEM-13919

This unit was removed from a hospital blood bank as part of an equipment upgrade programme.


The unit doesn't have any obvious way of changing the temperature and LCD panel doesn't appear to work - this is probably why they were replacing the equipment.


The unit began cooling as soon as powered on and settled at -8.8C.


There is a chart recorder but that doesn't appear to move and we don't have a key to open it.


Unit is perfectly good if you want a unit that cools to approximately -8.8C but nothing else. For any other purposes the unit requires some repairs / refurbishment.


Image of item

£ 64.31 (ex. VAT) 1 in stock

Labconco 4330100 Bench-Top Gel Dryer Lab

ITEM-12192

This unit was removed from a lab during a clearout.


The unit appears to work as it should. The accessories may not be related to the unit - but were included with the item during the clearout.


The unit is missing all its feet.


Image of item

£ 48.23 (ex. VAT) 1 in stock

Labconco Benchtop Gel Dryer

ITEM-04837

Labconco Benchtop Gel dryer, includes power cord and silicone cover. 

Image of item

£ 862.50 (ex. VAT) 1 in stock

Labconco Centrivap Cold Trap Freeze Drier Catalog No: 78110-01 Lab

ITEM-15433

This Labconco Centrivap Cold Trap was removed from a lab where it was surplus to requirements.


The unit powers up and compressor runs. The unit was run until ready light lit. It reached -<a href="http://54.7degC.It">54.7degC.It</a> has not been tested any further.


It is in good, used cosmetic condition but it does has scrapes and plenty of signs of use.


Image of item

£ 3,000.00 (ex. VAT) 1 in stock

Labman Automation SHU2 Automated Blood Plasma Reformatting Robot Micronic Lab

ITEM-10756

This system was removed from a university hospital research site as surplus to requirements.


The unit is a bespoke system manufactured by Labman Automation for one of our university clients - but they no longer require the system.


We are grateful that Labman Automation have provided us user manuals and documentation for this instrument. They are also able to supply software and drivers, and even install and setup the instrument (all for reasonable extra cost of course). We consider their support essential to recomissioning of this instrument, and they are very supportive.


From the user manual:


"The robot has been designed, built and tested for the specific purpose of de-capping, weighing, and identifying chilled 3.8ml cryotubes, taking aliquots of sample using pipettes and dispensing to chilled micronic tubes. The machine is designed for no other purpose."


The system is required to reformat blood, plasma and urine samples from an input tube to one or many micronic output tubes. The robot is a Tecan RSP9000 series auto-sampler with one XL3000 syringe module.


The sample tracking software manages the storage of the samples in the cryogenic freezers. The robot has two independent arms. The left hand robot arm takes the aliquots from input tubes located in a two position tube buffer in the centre of the robot bed and dispenses into the output tubes.


The right hand arm takes input tubes from the input rack, removes the cap, puts them into the tube buffer and takes any processed input tubes from the buffer back to the rack. "


The unit for sale on this listing is the one on the left in the photo showing two units.


The system was in full working order prior to removal from the lab, but we have not tested it at our site.



Image of item

£ 3,000.00 (ex. VAT) 1 in stock

Labman Automation SHUV Automated Blood Plasma Reformatting Robot Micronic Lab

ITEM-11597

This system was removed from a university hospital research site as surplus to requirements.


The unit is a bespoke system manufactured by Labman Automation for one of our university clients - but they no longer require the system.

We are grateful that Labman Automation have provided us user manuals and documentation for this instrument. They are also able to supply software and drivers, and even install and setup the instrument (all for reasonable extra cost of course). We consider their support essential to recomissioning of this instrument, and they are very supportive.


From the user manual:


"The robot has been designed, built and tested for the specific purpose of de-capping, weighing, and identifying chilled 3.8ml cryotubes, taking aliquots of sample using pipettes and dispensing to chilled micronic tubes. The machine is designed for no other purpose."

The system is required to reformat blood, plasma and urine samples from an input tube to one or many micronic output tubes. The robot is a Tecan RSP9000 series auto-sampler with one XL3000 syringe module.


The sample tracking software manages the storage of the samples in the cryogenic freezers. The robot has two independent arms. The left hand robot arm takes the aliquots from input tubes located in a two position tube buffer in the centre of the robot bed and dispenses into the output tubes.


The right hand arm takes input tubes from the input rack, removes the cap, puts them into the tube buffer and takes any processed input tubes from the buffer back to the rack. "


The unit for sale on this listing is the one on the right in the photo showing two units.


The system was in full working order prior to removal from the lab, but we have not tested it at our site.

Image of item

£ 246.04 (ex. VAT) 1 in stock

Labnet C2500 Prism Benchtop Laboratory Centrifuge Microcentrifuge Spares Repair

ITEM-09315

This unit was removed from a lab during a clearout. We tested the unit and it does power up but it doesn't run - it reports an 'sp error'.

Image of item

£ 150.00 (ex. VAT) 1 in stock

Labnet Prism Mini Centrifuge Microcentrifuge with 32 Sample Rotor Lab

ITEM-16006

This Labnet Prism Mini Centrifuge with 32 Sample Rotor was removed from a university laboratory where it was surplus to requirements.


The unit powers on and spins well. It can only be set to one speed.


The unit is in reasonable condition but the lid is quite heavily scratched.


The rotor can hold 32 samples. The bucket holes are 6mm in diameter.



Image of item

£ 38.58 (ex. VAT) 1 in stock

Labnet S0200 Laboratory Vortex Mixer Lab Spares Repairs

ITEM-10740

This unit was removed from a lab during a clearout.


Unfortunately the top piece has been snapped off / is missing so the unit is sold as spares / repairs.

Image of item

£ 71.25 (ex. VAT) 1 in stock

Labnet Spectrafuge C1301-P Mini Centrifuge Lab

ITEM-13297

This unit was removed from a lab during a clearout.


The unit is working and runs smoothly but the hinge lid is broken.

Image of item

£ 305.44 (ex. VAT) 1 in stock

Labnet Spectrafuge C1301-T Mini Centrifuge Benchtop Lab

ITEM-09178

This item was removed from a lab as surplus to requirements.


We have tested the unit and it appears to rotate as expected but we havn't tested it fully with samples etc. However, the lab assured us that the unit was in full working order prior to removal.


Therefore if you encounter any issues with the system we will offer you a full refund and cover return postage costs.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Labomed DC2 DiaCent 2 Cell Washer Centrifuge (Faulty Lid) Lab

ITEM-13764

This Labomed DC2 DiaCent 2 Cell Washer Centrifuge was removed from a laboratory as was surplus to requirements.


The unit powers on and runs smoothly on all settings. The pump runs smoothly too. It spins up to 2850rpm on manual mode.


Unfortunately however the lid button is broken and there is no manual release from what we could see to open the lid.





Image of item

£ 205.77 (ex. VAT) 1 in stock

Labquip Molecular Model Sets 26 Boxes Organic / Inorganic Chemistry Student Kit

ITEM-10265

These superb molecular model sets were removed from a university teaching lab as surplus to requirements.


They are quite old boxes but still in perfect working order.


There are 26 full boxes and then the last photo shows the additional spares.

Image of item

£ 216.82 (ex. VAT) 1 in stock

Labsystems Luminoskan RS Type 391 Microplate Reader

ITEM-06097

Labsystems Luminoskan RS Type 391 Microplate Reader


This item originated in a working lab in a top UK University and has come to us as part of a Lab Clear Out.

The unit powers up and control panel with display operational.

We are unable to test further.

100/110 Vac - 100V - 3.5 A Slow

120/130 Vac - 120V - 3.5A Slow

220/230 Vac - 22V - 2.0A Slow

240 Vac - 240V - 2.0A Slow


150VA


Serial no. 391000-084

Image of item

£ 600.00 (ex. VAT) 1 in stock

Labsystems Thermo Wellwash 4 MK 2 Microplate Washer Lab

ITEM-07622

This Labsystems Thermo Wellwash 4 MK 2 Microplate Washer was removed from a university laboratory where it was surplus to requirements.


Whilst we have only tested the unit to power-up at our site, the previous lab manager assured us the unit was in good working order when last used.


Items 1841 to 1860 of 3423