All Products
Items 2401 to 2450 of 2771
£ 250.00 (ex. VAT) 1 in stock
Konica Minolta SRX-101A Medical Film Processor Lab
ITEM-47235
Konica Minolta SRX-101A Medical Film Processor Lab
This item was removed from a facility where it was surplus to requirements.
The unit is in poor cosmetic condition, showing signs of discolouration and staining.
It is also missing two feet.
Despite the cosmetic wear, the unit is in good working order.
Please note; There are no Racks/Rollers included.
Includes:
- 2 x 25L Waste Tanks
£ 250.00 (ex. VAT) 1 in stock
Stainless Steel Encolsure Lx133 Wx98 Hx100 cm
ITEM-49225
Stainless Steel Encolsure Lx133 Wx98 Hx100 cm
This item was removed from a university where it was surplus to requirement.
It is in good overall cosmetic condition, originally removed from a Isolation table.
£ 250.00 (ex. VAT) 1 in stock
PolyScience WB05 5 L Water Bath Lab
ITEM-43141
PolyScience WB05 5 L Water Bath
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 250.00 (ex. VAT) 1 in stock
4 x Restek Helium Specific Filters w/ Baseplates & 2 x Gas Clean Filter Systems
ITEM-49863
4 x Restek Helium Specific Filters w/ Baseplates & 2 x Gas Clean Filter Systems
This lot of items comes from a facility where they were surplus to requirement.
They are in good cosmetic condition and remain untested.
Included;
- 4x Restek Single Position Baseplates
- 6x Restek Helium Specific Filters
- 2x Agilent Gas Clean Filter System Baseplate (one with additional bracket)
- 1x Varian Gas Clean Filter System Baseplate
£ 250.00 (ex. VAT) 1 in stock
A&D Precision Balance FX-1200i Lab
ITEM-49953
A&D Precision Balance FX-1200i Lab
This item was removed from a facility where it was surplus to requirement.
It is in reasonably good cosmetic condition and in good working order. (Calibration weights not included.)
The power supply is included.
£ 250.00 (ex. VAT) 1 in stock
Grimston Electriska EC48AH Pillar Drill 84x46x175 cm LxWxH
ITEM-48759
Grimston Electriska EC48AH Pillar Drill
This item was removed from a facility where it was surplus to requirements.
The unit is in average used cosmetic condition, with various marks and signs of wear from general workshop use.
The drill powers up as expected, and the chuck spins when the power button is pressed. It may benefit from a general service due to age and use, but no faults beyond cosmetic wear have been identified during basic testing.
No chuck key is included with the unit.
Dimensions
- External length (cm) 84
- External width (cm) 46
- External height (cm) 175
Work Table Dimensions
- 46 cm (W) x 45.5 cm (L)
£ 250.00 (ex. VAT) 1 in stock
Faraday Cage Lx122 Wx126 Hx186 cm (Cage Only) Lab
ITEM-49372
Faraday Cage Lx122 Wx126 Hx186 cm (Cage Only) Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good used cosmetic condition.
The main photo shows the cage fully assembled prior to collection; it has since been disassembled for transport and storage.
Included Components:
- 3 x Covers
- 2 x Shelves
- 3 x Cage Panels – 185 x 122 cm (Sides)
- 1 x Cage Panel – 125 x 123 cm (Roof)
- 2 x Frames – 126 x 122 cm
- 5 x Frame Bars – 120 cm
When fully assembled, the cage measures approximately L122 x W126 x H186 cm.
£ 250.00 (ex. VAT) 1 in stock
Perkin Elmer Series 200 LC Pump Lab
ITEM-49376
Perkin Elmer Series 200 LC Pump Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 250.00 (ex. VAT) 1 in stock
Unicam Helios Gamma UV-Vis Spectrophotometer
ITEM-49411
Unicam Helios Gamma UV-Vis Spectrophotometer
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 250.00 (ex. VAT) 1 in stock
Bambi BB8-240 Silent Air Compressor Lab
ITEM-49597
Bambi BB8-240 Silent Air Compressor
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and appears to be in good working order.
£ 250.00 (ex. VAT) 1 in stock
Kenwood Cooking Chef XL Model KCL95
ITEM-49599
Kenwood Cooking Chef XL Model KCL95
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however we are unable to test it further at our facility.
Please note; There are several parts are missing, including the mixing bowl, stirring rod/whisk, and the top cover.
£ 250.00 (ex. VAT) 1 in stock
Kenwood Cooking Chef XL KCL95
ITEM-49598
Kenwood Cooking Chef XL Model KCL95
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however we are unable to test it further at our facility.
Please note; There are several parts are missing, including the mixing bowl and stirring rod/whisk.
£ 250.00 (ex. VAT) 1 in stock
Perkin Elmer 600 Series Link Chromatography Interface Lab
ITEM-49659
Perkin Elmer 600 Series Link Chromatography Interface Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 250.00 (ex. VAT) 1 in stock
Perkin Elmer - Data Handling System DotLink Lab
ITEM-49667
Perkin Elmer - Data Handling System DotLink Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility. PSU not included.
£ 250.00 (ex. VAT) 1 in stock
Perkin Elmer Data Handling System DotLink Lab
ITEM-49666
Perkin Elmer Data Handling System DotLink Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Please note; The power supply is not included.
£ 250.00 (ex. VAT) 1 in stock
Logik LUL48W23 Fridge 92L Lab
ITEM-49687
Logik LUL48W23 Fridge Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
£ 250.00 (ex. VAT) 1 in stock
Teknix T55L1W Laboratory Refrigerator
ITEM-48410
Teknix T55L1W Lab Refrigerator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 250.00 (ex. VAT) 1 in stock
RDC Upright Display Cooler SS-P360FA Lab
ITEM-48413
RDC Upright Display Cooler SS-P360FA
This item was removed from a university where it was surplus to requirements.
It is in reasonably good cosmetic condition with a visible dent on the top panel and is in good working order.
The door handle is broken, but the cooler functions as expected.
Model: SS-P360FA
£ 250.00 (ex. VAT) 1 in stock
GFL 3040 Overhead Rotator Lab
ITEM-49796
GFL 3040 Overhead Rotator Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 240.00 (ex. VAT) 1 in stock
TQ TD1050 Steam Engine Trainer Teaching Rig
ITEM-31868
TQ TD1050 Steam Engine Trainer Teaching Rig
This was removed from a university lab where it was surplus to requirements.
The system powers up and is in full working order.
System Parts:-
TD1050 General Assembly
TQ160508-001
TD1050 - DTS2 Torque/Speed Display Unit
TQ165554-001
TD1050-DT1 Temperature Display
TQ160508-001
VDAS-F - VDAS Frame Mounted Version
TQ158991-010
Grosvenor Pump
Model - 5520
SN - 21248
Dynatherm Part no. 40993
SN - 13057-1
NEW ITEM
NEW ITEM
£ 240.00 (ex. VAT) 2 in stock
320 x Applied Biosystems MicroAmp 0.2ml Optical 96-Well Reaction PLATES
ITEM-35431
320 x Thermo Scientific MicroAmp 0.2ml Optical 96-Well Reaction PLATES
These are sold on behalf of a client.
The lot is brand new and unused.
Quantity - An overpack of 32 Packs of 10 Plates.
Make/Brand - Applied Biosystems
Model Number - N8010560
Product Number - 10411785
Exp Date - N/A
SKU - PLA-96WELL10-LIF
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
£ 230.00 (ex. VAT) 1 in stock
Hettich E1547 Lab Centrifuge Rotor 48 x 3g, 1136, 13000 RPM
ITEM-09570
This rotor was removed from a lab during a clearout.
We have not tested the rotor so it will need to be checked and tested prior to use in your centrifuge.
£ 225.00 (ex. VAT) 1 in stock
RGBLase Fiber Coupled Laser Module 405.5nm FC-405-010-SM-PC-1-0
ITEM-48427
RGBLase Fiber Coupled Laser Module 405.5nm
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition. It has not been powered on due to testing limitations with Class 3 and above lasers at our facility.
The previous owner stated it was in working order prior to removal.
The power supply is not included.
£ 200.00 (ex. VAT) 1 in stock
2 x Blue/White Sets of Drawers 58x50x83 cm LxWxH
ITEM-49579
2 x Blue/White Sets of Drawers 58x50x83 cm LxWxH
These units were removed from a facility where they were surplus to requirement.
Both are in good cosmetic condition with some sticker residue present.
Dimensions per unit:
Length (cm) 58
Width (cm) 50
Height (cm) 83
4 x Drawers
Internal drawer measurement:
Length (cm) 49
Width (cm) 44
Height (cm) 7
£ 200.00 (ex. VAT) 1 in stock
2 x White Metal Laboratory Drawer Units 44x28x69 cm LxWxH
ITEM-49583
2 x White Metal Laboratory Drawer Units 44x28x69 cm LxWxH
These drawer units were removed from a facility where they were surplus to requirements.
Both units are in good cosmetic condition, showing only light wear from previous use.
Each unit contains 6 metal storage drawers suitable for small parts, tools, or laboratory consumables.
No further testing has been carried out.
Included:
2 x White metal drawer units
Each unit with 6 internal drawers
Dimensions (per unit)
External:
Length: 44 cm
Width: 28 cm
Height: 69 cm
Internal Drawer Dimensions:
38 (L) × 23 (W) × 9 (D) cm
£ 200.00 (ex. VAT) 1 in stock
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer
ITEM-49927
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer – Spares/Repair
This item was removed from a facility where it was surplus to requirements.
It is in good cosmetic condition and powers on. The unit is partially functional: adjustments operate smoothly, and the Meograde head filters work correctly, producing light ranging from yellow to white to purple.
However, the brightness wheel does not adjust the light output. No further testing has been carried out.
Included Components:
Meopta Opemus 6a with Meograde Head
S/N: 206870
Transformer (RK100E)
12 V output for Meograde head
Meopta VIPONEL S15 Timer
S/N: 225025
Meopta Easel Baseboard
Size: 30 × 40 cm
£ 200.00 (ex. VAT) 1 in stock
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer
ITEM-49926
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer – Spares/Repair
This item was removed from a facility where it was surplus to requirements.
It is partially functional. Adjustment controls operate smoothly, and the Meograde head filters work correctly, producing light that ranges from yellow to white to purple. However, the brightness wheel does not adjust the light output.
Included Components:
Meopta Opemus 6a with Meograde Head
S/N: 205648
Transformer (RK100E)
12 V output for Meograde head
Meopta VIPONEL S15 Timer
S/N: 225024
Meopta Easel Baseboard
Size: 30 × 40 cm
£ 200.00 (ex. VAT) 1 in stock
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer
ITEM-49909
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer
This item was removed from a facility where it was surplus to requirements.
It is in good cosmetic condition and powers on. The enlarger is fully functional: adjustments move smoothly, the Meograde head filters operate correctly, and the light output ranges from yellow to white to purple as expected. The brightness wheel also functions properly. No further testing has been carried out.
Included Components:
Meopta Opemus 6a with Meograde Head
S/N: 204518
Transformer (RK100E)
12V output for Meograde head
Meopta VIPONEL S15 Timer
S/N: 225030
Meopta Easel Baseboard
Size: 30 × 40 cm
£ 200.00 (ex. VAT) 1 in stock
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer
ITEM-49908
Meopta Opemus 6a Enlarger with Meograde Head, Easel Frame & VIPONEL S15 Timer
This item was removed from a facility where it was surplus to requirements.
It is in good cosmetic condition and fully working. All adjustments operate smoothly, the Meograde head functions correctly, and no issues were observed during basic checks. No further testing has been carried out.
Included Components:
Meopta Opemus 6a with Meograde Head
S/N: 206877
Transformer
12 V output for Meograde head
Meopta VIPONEL S15 Timer
S/N: 225027
Meopta Easel Baseboard
Size: 30 × 40 cm
£ 200.00 (ex. VAT) 1 in stock
Syngene GeneGenius Tall Bio Gel Imaging System Lab (No UV)
ITEM-49794
Syngene GeneGenius Tall Bio Gel Imaging System Lab
This item was removed from a facility where it was surplus to requirement.
It is in reasonably good cosmetic condition and powers on. Zoom, focus, and lighting functions operate as expected.
No UV module is installed.
The system also comes with a spare filtered lens.
£ 200.00 (ex. VAT) 1 in stock
MS WAT-902 Noise Reduction Enclosure for Water Chiller
ITEM-48810
MS WAT-902 Noise Reduction Enclosure for Water Chiller
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 200.00 (ex. VAT) 1 in stock
MS Quiet Box II Noise Reduction System Small
ITEM-47818
MS Quiet Box II Noise Reduction System Small
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. Further testing has not been carried out at our facility.
Please note: There is no power supply included.
Includes:
- 8 Hand screws
Model: Quiet Box II
Serial No.: MSQ-F-01-07T-0376
- Internal Size - 41 x 26 x 45
- External Size once assembled - 50 x 34 x 46
£ 200.00 (ex. VAT) 1 in stock
Beijing Tiertime Technology Co. UP BOX + 3DP - 25 - 4F 3D Printer
ITEM-47602
Beijing Tiertime Technology Co. UP BOX + 3DP - 25 - 4F 3D Printer
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, the client has stated it was in good working order prior to removal.
ABS Filament.
£ 200.00 (ex. VAT) 1 in stock
Sunflower Alberti Medical Rest Couch
ITEM-47531
Sunflower Medical Rest Couch
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition.
£ 200.00 (ex. VAT) 1 in stock
APC SMX2200HV UPS Tower - Spares/Repair
ITEM-47343
APC SMX2200HV UPS Tower - Spares/Repair
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however the display shows - Load: 0% Batt: 0%.
Therefore, it requires a battery replacement, and is listed as Spares/Repair.
£ 200.00 (ex. VAT) 1 in stock
Union Carbide Liquid Nitrogen Dewar Lx28 Wx28 Hx60cm Lab
ITEM-46112
Union Carbide Liquid Nitrogen Dewar Lab
This item was removed from a university where it was surplus to requirement.
It is in good used cosmetic condition, we are unable to test it at our facility.
Dimensions; Lx28 Wx28 Hx60cm
£ 200.00 (ex. VAT) 1 in stock
Laboratory Thermal Equipment Incubator (Cream) Copper Lab
ITEM-46074
Laboratory Thermal Equipment Incubator (Cream) Copper Lab
This item was removed from a university lab where it was surplus to requirement.
It powers on and is in working order.
It is in reasonably poor cosmetic condition.
Features a copper interior.
£ 200.00 (ex. VAT) 1 in stock
Metal Cabinet With Door Lock w/ 2 x Keys Lab
ITEM-43029
Metal Cabinet with Door Lock
This item was removed from a facility where it was surplus to requirement.
It is in reasonably good condition, with some cosmetic wear, including chipped paint and surface scratches.
Includes:
- 2 keys
- 1 large metal tray fitted in the bottom of the unit
£ 200.00 (ex. VAT) 1 in stock
Eutech Instruments Salt 6+ Salinity - Temperature Meter Lab
ITEM-42324
Eutech Instruments Salt 6+ Salinity - Temperature Meter Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.
Included:
- 1 x Instruction manual
- 1 x Hard case
- 1 x Approx 50ml deionised water
- 1 x Approx 50ml 45ppt NaCl solution
- 1 x Approx 50ml 25ppt NaCl solution
- 1 x Approx 15ml 5ppt NaCl solution
£ 200.00 (ex. VAT) 1 in stock
Life Technologies Ion Torrent OneTouch ES with Server & Accessories
ITEM-24815
Life Technologies Ion Torrent OneTouch ES with PC & Accessories
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
The server is running ubuntu and has no graphical front end.
Included with the Ion Torrent OneTouch ES is;
1 x Tip Loader Assembly
1 x Tray Assembly
1 x Tip Arm Assembly
7 x Wash Bottles - unboxed
1 x New Wash Bottles in Box
1 x Line Clear Equipment Box - Includes various items, all photographed.
1 x Ion 318 Chip Kit V2 - 4 pack
3 x Ion PGM Template OT2 Reactions 200 kit
£ 200.00 (ex. VAT) 1 in stock
Scientifica & Cook Electronics Gas Laser Lab
ITEM-26036
THis Scientifica & Cook Electronics Gas Laser was removed from a university lab where it was surplus to requirements.
The unit is sold untested.
It is in good cosmetic condition with minor marks.
£ 200.00 (ex. VAT) 1 in stock
Oertling Vintage Balance Scales Model 146 Metric Manufactured In Britain
ITEM-42186
Oertling Vintage Balance Scales Model 146 Metric Manufactured in Britain
This Vintage Balance Scale was removed from a university lab where it was surplus to requirements.
This item is in excellent condition.
The model was produced between 1953 and 1980 and features a hardwood case with a cast iron chassis. All adjusting
levers and mechanical parts move freely. No further testing was conducted.
Specifications:
- Model: 146
- Serial No.: 24895
£ 200.00 (ex. VAT) 1 in stock
3 x Bristol Maid Physio Beds Lab
ITEM-44449
3 x Bristol Maid Physio Beds
These items were removed from a university where they were surplus to requirements.
The beds are in fairly good cosmetic condition.
NEW ITEM
NEW ITEM
£ 200.00 (ex. VAT) 1 in stock
8 x New X-pendable X29622 Filter Cartridges Lab
ITEM-44948
8 x X-pendable Filter Cartridges
These items were removed from a university lab, where they were surplus to requirement.
Seven come brand new and boxed, and one is unboxed but still sealed and unused.
- Filter No.: X29622
- Fit: 26455/PAS-9
£ 200.00 (ex. VAT) 1 in stock
UVP Lab Products HB-1000 Hybridizer Hybridization Oven Lab
ITEM-38153
UVP Lab Products HB-1000 Hybridizer Hybridization Oven Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
£ 200.00 (ex. VAT) 1 in stock
Reichert-Jung UltraCut Microtome 701701
ITEM-40913
This Reichert-Jung UltraCut Microtome 701701 was removed from a university lab where it was surplus to requirements.
The item is in reasonably good cosmetic condition and is mechanically sound.
We were unable to power it up as we did not have the correct PSU.
£ 200.00 (ex. VAT) 1 in stock
Thermo Electron Corporation Multiskan EX Model 355 Microplate Reader Lab
ITEM-40951
This Thermo Electron Corporation Multiskan EX Model 355 Microplate Reader was removed from a university lab where it was surplus to requirements.
The unit powers up and performs a self-check test on start-up, we are unable to test it further at our facility.
It is in good cosmetic condition with marks from use.
£ 200.00 (ex. VAT) 1 in stock
Techne Progene Thermal Cycler Model FPR0GO2D Lab
ITEM-48734
Techne Progene Thermal Cycler Model FPR0GO2D Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 200.00 (ex. VAT) 1 in stock
Laboratory Trespa Table and Computer Station
ITEM-49425
Table and Computer Station for BD FacsAria II System Lab
This item was removed from a university where it was surplus to requirement.
This listing includes the table and computer station originally supplied as part of a BD FacsAria II System.
The benching comprises two tables secured together using four bolts and a metal joining bracket.
The item has been separated from the main system due to damage sustained to the wheels when supporting the full system weight.
The larger table’s wheels are non-functional, making movement difficult. The bracket and bolts used to secure both tables together are safely stored within the cable tidy beneath the computer desk.
The combined dimensions:
External length (cm) 260
External width (cm) 126
External height (cm) 86
£ 200.00 (ex. VAT) 1 in stock
TEKNOMEK Stainless Steel Lab Table Workbench 180x75x85 cm LxWxH
ITEM-49584
TEKNOMEK Stainless Steel Lab Table Workbench 180x75x85 cm LxWxH
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition.
Dimensions;
- Length (cm) 180
- Width (cm) 75
- Height (cm) 85
Items 2401 to 2450 of 2771