Items 1481 to 1500 of 3024

Image of item

£ 565.00 (ex. VAT) 1 in stock

Edwards Penning 8 Vacuum Gauge with CP25-S Cold Cathode High Vacuum Gauge Lab

ITEM-27493

Edwards Penning 8 Vacuum Gauge with CP25-S Cold Cathode High Vacuum Gauge


This was removed from a university lab where it was surplus to requirements.


Both gauges have been tested with an Edwards pump and are in full working order.




Image of item

£ 565.00 (ex. VAT) 1 in stock

Sanyo Medicool Pharmaceutical Refrigerator Model - MPR 161D Lab

ITEM-35095

Sanyo Medicool Pharmaceutical Refrigerator  Model - MPR 161D


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer. It is in good working order.


It is in good cosmetic condition with minor marks from use.


2 Shelves - 70 x 26cm


Image of item

£ 565.00 (ex. VAT) 1 in stock

Spectra Physics 2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box Lab

ITEM-23507

Spectra Physics  2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box


This system was removed from a university lab where it was surplus to requirements.


Included are;


1 x Spectra Physics Laser Model 2025-45

The unit is in good cosmetic condition but we were not able to power on the unit as it had been hardwired and disconnected from its previous location.


1 x Spectra Physics Power supply Model 2560

We were unable to power this up as it has been previously hard wired. It is in good cosmetic condition but has marks from dust and grime. The unit is supplied with Keys.


1 x Spectra Physics Control Box Model 2270

The unit is in good cosmetic condition but we were not able to power the unit as the power supply powers the unit.

Image of item

£ 565.00 (ex. VAT) 1 in stock

4 x Kenwood CS-4125 Oscilloscopes Lab

ITEM-18883

4 x Kenwood CS-4125 Oscilloscopes


These were removed from a university lab where they were surplus to requirements.


The units all power up but have not been tested further.


They are in good cosmetic condition but have some marks from use.

Image of item

£ 565.00 (ex. VAT) 1 in stock

Grant-Bio PHMP Microplate Thermoshaker Shaking Incubator Lab

ITEM-23299

This Grant-Bio PHMP Microplate Thermoshaker was removed from a university lab where it was surplus to requirements.


The unit powers up and was tested with a digital thermometer (not included). The power supply is included.


Wes et the temperature to 37˚c which it reached after around 10 mins, then we set it to the maximum temperature of 60˚c and it reached about half an hour later.


The shaker works well and we have replaced the belt to maximise the longevity of the unit's life. We ran it at 250 and 1200rpm.


It is in good cosmetic condition with some very minor marks from use.

Image of item

£ 565.00 (ex. VAT) 1 in stock

Solotec Scientific Waysafe WS110/T Minicab Fume Hood Lab

ITEM-31950

This Solotec Scientific Waysafe WS110/T Minicab  Fume Hood was removed from a university lab where it was surplus to requirements.


The unit powers up and is in reasonably good cosmetic condition with marks from use.


Internal dimensions - L58 W50 H48cm



Image of item

£ 560.00 (ex. VAT) 1 in stock

Ormerod Engineering Homogeniser Type DF1L P Lab

ITEM-25081

This Ormerod Engineering Homogeniser Type DF1L P was removed from a university lab where it was surplus to requirements.


It is in reasonable condition. There are some scuffs and scratches from general use. The unit's bowl is detachable.


The unit powers up and it makes a grinding noise when running. It was not tested further.


Image of item

£ 560.00 (ex. VAT) 1 in stock

LEEC F2 1500w Laboratory Drying Cabinet Lab

ITEM-29920

This LEEC F2 1500w Laboratory Drying Cabinet was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer. It is in full working order. The power light doesn't work, but that is cosmetic.


It is in good cosmetic condition with marks from use.


Item is supplied with 4 shelves.


Internal dimensions are: L 55cm x W 60cm x H 138cm.

Image of item

£ 560.00 (ex. VAT) 1 in stock

Genlab DC 500 1750w Laboratory Drying Cabinet Lab

ITEM-29919

Genlab DC 500 1750w Laboratory Drying Cabinet


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The power light doesn't work, but it does not affect the operation.


It is in good cosmetic condition with marks from use.


Internal dimensions are: L 58cm x W 49cm x H 138cm. No shelving.

Image of item

£ 560.00 (ex. VAT) 1 in stock

Topcon SL-2E Slit Lamp with Topcon ATE-600 Table/Stand Lab

ITEM-35086

Topcon SL-2E Slit Lamp with Topcon ATE-600 Table/Stand


There was no PSU supplied with the Slit lamp so it has not been tested. The table powers up and moves up and down electronically.


Included are;


Topcon SL-2E Slit Lamp

SN - 621311

No power supply, or eye pieces.


Topcon Table Stand

Model - ATE-600

Table Size - L55 W36 H70 - 88cm


Image of item

£ 560.00 (ex. VAT) 1 in stock

Dionex ASI-100 HPLC Automated Sample Injector Lab

ITEM-26037

This Dionex ASI-100 HPLC Automated Sample Injector was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further at our facility.


It is in good cosmetic condition with some marks from use.

Image of item

£ 560.00 (ex. VAT) 1 in stock

Tanberg Edge 95 Video Conferencing System - TTC8-01, TTC7-14, TRC 4

ITEM-25520

This Tanberg Edge 95 Video Conferencing System was removed from a university where it was surplus to requirements.


The system includes;


Tandberg TTC7-14

Tandberg TTC8-01 Camera (SN-20A80125) Powers on

Tandberg TRC 4 Remote (requires 4 x AAA Batteries)

Audio Technica Microphone

PC Cable

Ethernet Cable

PSU (TTC7)

12vdc Power Supply (Camera)


The item is in a reasonable, used cosmetic condition but the camera is a bit sticky from the age of the rubber components.


Image of item

£ 560.00 (ex. VAT) 1 in stock

Sorvall Heraeus 75006435 5850rpm Swing Arm Centrifuge Rotor with Buckets Lab

ITEM-19091

This Sorvall Heraeus 75006435 5850rpm Swing Arm Centrifuge Rotor with Buckets was removed from a university lab where it was surplus to requirements.


It is in good used condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used again.


It is supplied with 4 Buckets.

Max Load: 600g

Max Speed: 5.850rpm.

Max Cycles: 22.000.

Autoclavable 121˚c.


Image of item

£ 560.00 (ex. VAT) 1 in stock

UVP Gel Documentation System 97-0070-02 w/ Camera & PSU Lab

ITEM-24761

This UVP Gel Documentation System was removed from a university lab where it was surplus to requirements.


Included in the system are;


1 x UVP Gel Documentation System

Model No. 97-0070-02

The unit powers on and is in good cosmetic condition. All buttons appear responsive to the unit. It was not tested further


1 x UVP Camera

Model 4912-5110/0000

The unit powers on and is in good cosmetic condition but it was not tested further.


4x Cables:

3x BNC Cables

1x AUX cable


1 x Camera Power Supply.

Model RS 597-762

The unit powers on and is in good cosmetic condition. A green light on the back of the camera lit once the PS was powered up.




Image of item

£ 560.00 (ex. VAT) 1 in stock

Eppendorf 5430/5430R Rotor A-2-MTP Windshield with 2 x 11/08 Swinging Buckets

ITEM-25497

This Eppendorf 5430/5430R Rotor  A-2-MTP Windshield with 2 x 11/08 Swinging Buckets was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition but has not been tested at our facility. It will need to be inspected for safety by a qualified engineer before it is used.


Max 4680 RPM

Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 560.00 (ex. VAT) 1 in stock

Stemcell Technologies Robosep 20000 Magnetic Cell Separator Lab Spares/Repairs

ITEM-34595

This Stemcell Technologies Robosep 20000 was removed from a university lab where it was surplus to requirements.


The unit powers up but the screen will not communicate with the rest of the units. It just displays "no signal".


It is in good cosmetic condition with marks from use.


It is sold for spares/repairs.

Image of item

£ 560.00 (ex. VAT) 1 in stock

Zeiss Universal Microscope w/ 2 x Objectives Plan 2.5/0.08 100/- 1.6/0.03

ITEM-20045

This Zeiss Universal Microscope was removed from a university lab where it was surplus to requirements.


The unit has no power supply so has not been tested.


It is in good cosmetic condition but has some marks from use. It is supplied with a cover & 2 x objectives.


Plan 2.5/0.08

100/-

4168483


Plan 1.6/0.03 - 5/0.1

160/-

4619740



Image of item

£ 560.00 (ex. VAT) 1 in stock

Varian Membrane Diaphragm Vacuum Pump 949-9402 Lab

ITEM-23380

This Varian Membrane Diaphragm Vacuum Pump 949-9402 was removed from a university lab where it was surplus to requirements.


The unit powers up and runs but has not been tested with a gauge.


It is in good cosmetic condition with minor marks from use.

Image of item

£ 560.00 (ex. VAT) 1 in stock

10 x Oscilloscopes - Telequipment, Hameg, Griffin, Harris, S51E, S51, D51, D61a

ITEM-21058

10 x Oscilloscopes


These were removed from a university lab where they were surplus to requirements.


All the units have been powered up but not tested further. They are in reasonably good cosmetic condition with some marks from use.


Included are;


3 x S51E Telequipment Oscilloscopes

1 x S51 Telequipment Oscilloscopes

2 x D51 Telequipment Oscilloscopes

1 x D61a Telequipment Oscilloscopes

1 x Hameg HM203-2

1 x Griffin Single Beam Oscilloscope

1 x Harris 10MHz Sigle Beam Oscilloscope

Image of item

£ 560.00 (ex. VAT) 1 in stock

Manlight ER/YB Doped Fiber Amplifier Model HWT-EDFA-3UR-C-40-1 Lab

ITEM-25641

This Manlight ER/YB Doped Fiber Amplifier Model HWT-EDFA-3UR-C-40-1 was removed from a university lab where it was surplus to requirements.


The unit powers on and is in good cosmetic condition. Something sounds loose inside.


A message, 'EDFA OFF' appeared on the screen during testing. None of the buttons appeared responsive. The display did not change when pressing any button on the unit.


With it are;


1 x Manual Photocopy


1x Key:

Mod No. 350


Fiberoptic Cables:

1x cable is in good cosmetic condition.

1x cable is in reasonable cosmetic condition. Part of the cable housing is missing.




Items 1481 to 1500 of 3024

Filters

Price (£)

to

Condition