All Products
Items 1901 to 1950 of 2763
£ 500.00 (ex. VAT) 1 in stock
Pair of FluidX XTR-Single Tube Readers Lab
ITEM-34735
2 x FluidX XTR-Single Tube Reader Lab
These items were removed from a university lab where they were surplus to requirements.
Both items power up and are in good cosmetic condition.
£ 500.00 (ex. VAT) 1 in stock
21 x Fisherbrand 5000ml Conical Flasks FB33137 Lab
ITEM-36620
21 x Fisherbrand 5000ml Conical Flasks FB33137
These were removed from a university lab where they were surplus to requirements.
The units are used but are in good condition.
£ 500.00 (ex. VAT) 1 in stock
Kryo Planer Biomed 10 Series System Lab Spares/Repairs
ITEM-37143
Kryo Planer Biomed 10 Series System
This system was removed from a university where it was surplus to requirement.
The system failed PAT on insulation. It is sold for spares/repairs.
1x Kryo 10 Series Controller:
Model 10-20
1x Kryo 10 Series Controller:
Model 10-20
1x Kryo 10 series Controller Key
All units listed above power on and are in good cosmetic condition, neither have been tested further at our facility.
1x LNP4 Planer freezer Pump:
Model LNP4 13181
This item is in reasonably good cosmetic condition, but due to it requiring a separate power supply, we are unable to test it at our facility.
£ 500.00 (ex. VAT) 1 in stock
HasKris Recirculating Chiller S/n HA007835 Lab Spares/Repairs
ITEM-37147
This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surplus to requirements.
The unit powers up but was not tested further at our facility.
It is in good cosmetic condition, with some marks from use.
Some of the components have been removed, it is sold for spares/repairs
£ 500.00 (ex. VAT) 1 in stock
Rigaku Integrated Actor Controller Automated Crystal Transfer System
ITEM-37644
Rigaku Integrated Actor Controller Automated Crystal Transfer System
This system was removed from a university where it was surplus to requirement.
Both elements power up and are in excellent cosmetic condition, we are unable to test them further at our facility.
All items included:
Rigaku Controller
Serial No. 4016
Rigaku - Leister End Effector Dryer
Serial No. 1054
Accessories/Cables:
2 x serial ribbon leads
Power lead
Robot connection lead
Data lead
Dewar connection lead
Leister End Effector Heater instruction manual
£ 500.00 (ex. VAT) 1 in stock
INTEK Model LH200 Fraction Collector Lab
ITEM-37685
This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.
The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.
£ 500.00 (ex. VAT) 1 in stock
INTEK LH200 Fraction Collector Lab
ITEM-37686
This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requirements.
The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.
£ 500.00 (ex. VAT) 1 in stock
Biometra TGGE System with Controller and TGradient Lab
ITEM-37756
This Biometra TGGE System with Controller and TGradient was removed from a university lab where it was surplus to requirements.
All units are in reasonably good cosmetic condition and powered up, unable to test further at our facility.
System includes:
Biometra TGGE System
Serial Number: 1506138
Biometra TGGE System Controller
Serial Number: 1203176
Biometra TGradient
Serial Number: 1910339
£ 500.00 (ex. VAT) 1 in stock
2 x Multi-Tier Rack Laboratory Trolleys
ITEM-39960
Multi-Tier Rack Trolley x 2
This item was removed from a university lab where it was surplus to requirements.
Feature 3 graduated shelves.
Both trolleys are in good cosmetic condition.
£ 500.00 (ex. VAT) 1 in stock
Vacuum Generators LTD (UHV) Valve & Turbo Molecular Chamber Lab
ITEM-41171
Vacuum Generators LTD (UHV) Valve & Turbo Molecular Chamber Lab
These items were removed from a university where they were surplus to requirement.
Both items are in good cosmetic condition, we cannot test them at our facility.
£ 500.00 (ex. VAT) 1 in stock
Sutter Lambda LS Illuminator LB-LS/17 Lab
ITEM-41429
Sutter Lambda LS Illuminator LB-LS/17
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, but the power switch is stuck in the on position.
We are unable to test it further at our facility.
Lamp Runtime: 05573.7 hours
£ 500.00 (ex. VAT) 1 in stock
Laboratory Isolation Table - White Lab
ITEM-41681
Isolation Table - White Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Hewlett Packard 5890 Series II Plus Gas Chromatograph w/ HP 7673 Injector Lab
ITEM-41843
Hewlett Packard 5890 Series II Plus Gas Chromatograph w/ Hewlett Packard 7673 GC/SFC Injector Lab
This item was removed from a university where it was surplus to requirement.
The item is in good cosmetic condition and powers on. However, when the temperature was tested to its maximum of 325°C, it shut down at 203°C with the error message
"EPPA: SAFETY SHUTDOWN,"
Therefore, it is listed as Spares/Repair.
Furthermore, the included 7673 GC/SFC Injector could not be tested due to the absence of the controller.
£ 500.00 (ex. VAT) 1 in stock
Job Lot of 13 Vintage Microtome Knives With Sharpening strops and Whetstones
ITEM-42018
Job Lot of 13 Vintage Microtome Knives With Sharpening Strops and Whetstones
These items were removed from a university lab, where they were surplus to requirement.
The knife blades are all in very good condition, with sharp and undamaged cutting edges, appearing to have been well maintained, except for the hand knife, which has a poor cutting edge.
The wooden boxes are in excellent condition, except for two that are damaged.
The lot comprises:
- 3 x Shandon Nothung C wedge shape 20cm blades (circa 1967) in box
- 1 x Shandon Northung A concave 25cm blade (circa 1967) in box
- 1 x Unidentified C wedge 18cm blade in box
- 3 x MSE Ltd No. 9057.W wedge 9cm blades in box
- 2 x Cambridge Instruments rocking microtome knives (10cm blades) in box
- 1 x Unidentified wedge 8cm blade in leather case
- 1 x Hand knife with handle in poor condition in box
- 4 x Leather sharpening strops (30-35cm long), 2 in box
- 2 x 15cm whetstones
- 1 x Acrylic 15cm sharpener
- 1 x 25cm blade holder
- 3 x 20cm blade holders
- 1 x 17cm blade holder
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Carl Zeiss LSM 5 Laser Module with 2 Lasos LGK lasers and Controller + PSU
ITEM-42756
Carl Zeiss LSM 5 Laser Module with 2 Lasos LGK Lasers, Controller, and PSU
This system was removed from a university laboratory where it was surplus to requirements.
The Laser Drive 9600 Series PSU powers on and also successfully powers the Lasos LGK 7812 ML 1 Controller, which runs with the large cooler operational.
We were unable to test the Carl Zeiss LSM 5 Laser Module due to our safety policy surrounding Class III Lasers, but we are told it was faulty.
It is sold for spares/repairs.
In good cosmetic condition.
Includes:
- Carl Zeiss LSM 5 Laser Module
- Serial No.: 850 351
- Year: 1997
- Laser Drive 9600 Series Power Supply
- Model: LGN-7802-4
- Serial No.: 794592
- Lasos LGK 7812 ML 1 Controller
- Manufacturing No.: 334
- Lasos LGK 7628-1 Helium Neon Laser
- Serial No.: 6194
- 15mW, Class 3B, 633nm, Year: 1997
- Lasos LGB 7774 Helium Neon Laser
- Serial No.: 459
- 5mW, Class 3B, 543nm, Year: 1997
£ 500.00 (ex. VAT) 14 in stock
Medium Lasermet Heavy Duty Laser Blocking Screen 124x65x199 cm
ITEM-43133
Lasermet Heavy Duty Laser Blocking Screen – Good Condition
This item was removed from a university laboratory as surplus to requirements.
The unit is mostly in good cosmetic condition with minimal wear; however, some panels show minor dents and scratches consistent with previous use.
Suitable for all laser wavelengths.
The screen is labelled with the following irradiated area performance levels:
- Irradiated Area PEL (T3) 10s PEL (T2) 100s
- 4 mm² 61MW/m² 34MW/m²
- 2000 mm² 2.7MW/m² 1.5MW/m²
Model: Laser Blocking Screen
Please note: As multiple units are available, the item you receive may have minor cosmetic differences from the one shown in the listing imag
£ 500.00 (ex. VAT) 1 in stock
Beckman Coulter JLA-10.500 Rotor
ITEM-46322
Beckman Coulter JLA-10.500 Rotor w/ 6 x Expired Biological Safety Canisters
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in working order.
Rotor specifications;
- Model - JLA-10.500
- Max RPM - 10,000.
- Max RCF - 18,600 x g.
- k Factor - 2,850.
- Tube Number / Volume / Size / Dimensions: 6 x 500 mL. 69 x 160 mm. 2.75 x 6.5 in.
- Max Rotor Capacity - 3L.
- Weight - 19.7 kg.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Link Analytical eXL Model 1100-012 X-Ray Imaging & Analysis System Spares/Repair
ITEM-46803
Link Analytical eXL Model 1100-012 System
This system was removed from a university laboratory where it was surplus to requirements.
The main eXL unit initially powered on, supplied power to the monitor, and displayed startup errors (see photos), but the keyboard and mouse were unresponsive. Upon restarting, the monitor and indicator lights did not power up, although internal computer activity could still be heard. Further attempts to power cycle the system were unsuccessful.
Therefore, this system is listed as Spares/Repair.
It is in good overall cosmetic condition.
The system comprises the following:
- Link Analytical eXL
- Model: 1100-012
- Serial No.: 2917
- Link Analytical Monitor
- Model: CLR 1401
- Serial No.: 2665
- Link Analytical Keyboard
- Model: 1487
- Serial No.: 2763
- Link Analytical Mouse and Mouse Mat
- Link Analytical Printer (Epson LQ-500)
- Model: P78PA
- Serial No.: T0011258
- *Note: Printer would fail PAT due to a missing rear cover
- (Box of printer paper included)
Included Manuals:
- Link Analytical eXL System Service Manual
- Link Analytical Disk, Tape & File Sequel, Sequences, Display & Hard Copy, Genie, Video Frame Grabber
- Link Analytical Getting Started – X-Ray Analyser, System Manager, RTS-2/FLS, Auto
- Link Analytical Computer System & Electron Diffraction Pattern Analysis
- Link Analytical Analysis & Imaging
- Link Analytical Quantitative Mapping Operators Manual
Accessories and Additional Parts:
- Box of 10 floppy disks
- Labelled black 'X-Ray' cables and a grey monitor cable (collected as connected)
- 2 x Tracor Northern IPP Series II X-Ray Analyzer Operator Manuals
- 3 x Digital software disks (in blue cases – large format)
- GEMS Sensor – P/N 197093-RS (white)
- Unidentified round metal part
- Boxed metal piece labelled "Scintillator" (assy – ME 0084)
- Metal part tagged "X-Ray Source XA2-57"
- Metal part with Watec WAT-902B CCD Camera and:
- Objective lens: M Plan APO 10 SB 0.23 ∞/0 SLWD 39
- Metal piece with part number AG61-113 etched at the base
- Orange cable marked "AML J011 034"
- Black light source
- Various other cables (not compatible with the eXL)
£ 500.00 (ex. VAT) 1 in stock
Particle Measuring Systems PMS Liquilaz-E20-WN-HF W/ Enclosure
ITEM-48543
Particle Measuring Systems Liquilaz-E20-WN-HF with Enclosure
This item was removed from a university laboratory where it was surplus to requirements.
It is in reasonable cosmetic condition. We were unable to identify the laser classification.
Due to testing limitations with Class 3 and above lasers at our facility, the unit has not been powered on or functionally tested.
Includes:
- PMS Aqua NEMA enclosure
- PMS Liquilaz-E20-WN-HF particle counter
Model: Liquilaz-E20-WN-HF
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Genevac VC3000TA Vapour Condenser Spares/Repair Lab
ITEM-48656
Genevac VC3000TA Vapour Condenser Spares/Repair Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition, but was unable to be tested as it requires connection to a Genevac Centrifugal Evaporator. (Not included)
Additionally, the previous owner notified us that it was faulty, although the fault was not diagnosed,
It is therefore listed as Spares/Repair
£ 500.00 (ex. VAT) 1 in stock
VWR PCR Plate Centrifuge II Lab
ITEM-49516
VWR PCR Plate Centrifuge II Lab
This item is sold on behalf of a client where it is surplus to requirements.
This item is in complete working order, and in good cosmetic condition.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
£ 500.00 (ex. VAT) 1 in stock
Ohaus Frontier Micro Centrifuge FC5513 Lab
ITEM-49518
Ohaus Frontier Micro Centrifuge FC5513 Lab
This item is sold on behalf of a client where it is surplus to requirements.
This item is in complete working order, and in good cosmetic condition.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
ICS Chiller ICE005 230/1/50 Spares/Repair Lab
ITEM-49788
ICS Chiller ICE005 230/1/50
This item was removed from a university laboratory where it was surplus to requirements.
The chiller is in reasonable used cosmetic condition with typical signs of use.
The unit powers on, but is listed as Spares/Repair due to the following;
The previous owner reports it has been unused for 2–3 years and previously developed internal sludge due to a reaction with a black iron connector in the cooling loop. They advise it would likely run again after a full system flush with the correct cleaner.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair
ITEM-08317
Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair
This item was removed from a university where it was surplus to requirement.
This item is in poor cosmetic condition and is sold as Spares/Repair.
The lid of the item is not fixed, and the internal pump has been removed.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Priorclave EV100 Top-Loader Autoclave Lab Spares/Repairs
ITEM-21246
This was removed from a university lab where it was surplus to requirements.
The system has a main board fault. It does not heat up as a result.
It is sold for spares/repairs.
£ 500.00 (ex. VAT) 1 in stock
Analytik Jena AlphaSC Samplerblock Thermal Cycler Lab
ITEM-29877
This Analytik Jena AlphaSC Samplerblock Thermal Cycler was removed from a university lab where it was surplus to requirements.
The unit powers up and runs.
It is in good cosmetic condition with marks from use.
48/R9-96/R4.5
340:720.14
£ 500.00 (ex. VAT) 1 in stock
Leica Diavert Inverted Microscope w/ 4 x Objectives & 465 Power Supply Lab
ITEM-30390
Leica Diavert Inverted Microscope w/ 4 x Objectives & 465 Power Supply
This was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition. There are some light tape marks from general use, as well as some patina from age.
It is in good working order.
Included are;
1 x Leitz Phaco A 0.25 L62 Lamp
2x Eyepieces:
PERIPLAN GF 12.5x /20 M lietz Wetzlar Germany
4x Leitz Wetzlar Objectives:
1x 170/- 4/0.12
1x 170/- L32/0.4 Phaco 1
1x 170/- L20/0.32 Phaco 1
1x 170/- 10/0.25 Phaco
Power Supply:
Model. 465
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Fujifilm FLA-3000R Fluorescent Image Analyzer Spares/Repairs
ITEM-30522
This was removed from a university lab where it was surplus to requirements.
The unit powers up but a warning light flashes. It was not tested further.
It is sold for spares/repairs
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Beckman Coulter Avanti J-HC Centrifuge Lab Spares/Repairs
ITEM-31551
Beckman Coulter Avanti J-HC Centrifuge
This item was removed from a university lab where it was surplus to requirements.
The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted.
The spindle is bent.
Therefore, it is listed as Spares/Repair.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs
ITEM-34798
Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm
This was removed from a university lab where it was surplus to requirements.
The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card Lab Spares/Repairs
ITEM-35094
Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has an issue with its cycle timer. It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Spares/Repair
ITEM-37195
Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Lab
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition, however, during testing, the unit powered on but emitted buzzing sounds followed by hissing and smoke.
Therefore, it is listed as Spares/Repair
£ 500.00 (ex. VAT) 1 in stock
Campden Model 773 Micropipette Puller Lab
ITEM-37802
This Campden Model 773 Micropipette Puller was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition.
We are unable to test this item further at our facility.
£ 500.00 (ex. VAT) 1 in stock
Leybold S16B/WS Trivac Rotary Vane Vacuum Pump
ITEM-39189
Leybold S16B/WS Trivac Rotary Vane Vacuum Pump
This was removed from a university lab where it was surplus to requirements.
The unit powers up and draws suction but has not been tested further.
It is in reasonably good cosmetic condition, with some marks from use.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Astell AMA240N Floorstanding Autoclave Lab Spares/Repairs
ITEM-39207
Astell ASA240 Floorstanding Autoclave
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in reasonably good cosmetic condition externally. However, the internal plastic lid cover supports have been snapped off to release the lock and remove the lid.
This allows access, but the unit remains inoperable for standard use. Therefore, it is sold as Spares/Repair.
As displayed, it is in poor cosmetic condition internally.
Specifications;
- Model- AMA240N
- S/N- CLN51381
£ 500.00 (ex. VAT) 1 in stock
Lab-Bubble Still Air PCR Enclosure - Blue
ITEM-39749
Lab-Bubble Still Air PCR Enclosure - Blue
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Nikon Diaphot 300 Microscope *Condenser Removed* Lab Spares/Repairs
ITEM-39790
Nikon Diaphot 300 Microscope *Condenser Removed*
This microscope was removed from a university lab where it was surplus to requirements.
All mechanical elements are in good working order. The unit does not include the power supply or condenser therefore we are unable to perform any other tests. It is in good cosmetic condition with minor marks.
As stated in the title the condenser is not included.
It is made up of the following modules;
Nikon ND2 Filter
Nikon ND4 Filter
Nikon CFWN 10x/20 Eyepiece x 2
Nikon 100w Mercury Lamphouse LH-M100C-1
Nikon Halogen 12V 100W Microscope Lamp
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Millipore Guava EasyCyte HT Flow Cytometer Lab Spares/Repairs
ITEM-40069
Millipore Guava EasyCyte HT Flow Cytometer
This was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition and powers on, however during testing there were undiagnosed issues identified that prevented use.
Therefore, it is listed as Spares/Repair.
£ 500.00 (ex. VAT) 1 in stock
Leitz Wetzlar Dialux 20 Microscope w/ 3 x Objectives Phaco, Plan, NPL Lab
ITEM-40988
Leitz Wetzlar Dialux 20 Microscope
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition, with all mechanical elements in working order.
Includes the following.
1x Leitz Lamp Power Supply
Objectives:
1x Leitz Wetzlar P 10/0.25 170/-
1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2
1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17
£ 500.00 (ex. VAT) 1 in stock
Perkin Elmer 785A UV-VIS Detector Lab
ITEM-41330
Perkin Elmer 785A UV-VIS Detector Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Perkin Elmer Flexar PDA Detector - Spares/Repair Lab
ITEM-41445
Perkin Elmer Flexar PDA Detector Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, however, it remains inoperative due to suspected internal damage to the motherboard.
Therefore, it is listed as Spares/Repair
£ 500.00 (ex. VAT) 1 in stock
LEEC Research CO2 Incubator Model GA2000 Lab
ITEM-41593
LEEC Research CO2 Incubator Model-GA2000
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in reasonably good cosmetic condition.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Protec Eco Max X-Ray Film Processor Lab Spares/Repairs
ITEM-42060
Protec Eco Max X-Ray Film Processor
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers on and is in fair condition with some wear. There are some spots of rust, and the baseplate is missing. Therefore, resulting in a visual PAT fail.
It is listed as Spares/Repair.
Specifications:
- Model: Eco Max
- Serial No.: 118630-1309-0841
- REF: 1186-3-4000
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer 'Spares/Repair'
ITEM-42303
Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, however, when powered it displays a persistent "Wrong Power" warning with irregular compressor activity and fails to cool.
Therefore, it is listed as Spares/Repair.
Specifications.
- Model: Forma 906
- Serial#: 812688-2375
- Year: 2009
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer Lab Faulty
ITEM-42305
Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on. During testing, it failed to reach the set temperature of -40˚C, only cooling down to 7˚C.
Therefore, it is listed as Spares/Repair.
Additionally, three inner door slide catches are missing.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Spares/repairs
ITEM-42306
Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Freezer
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, however, during testing it failed to cool and remained at ambient temperature when set to -86ºc. Further inspection iden
Therefore, it is listed as Spares/Repair.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Molecular Dynamics Storm 860 Molecular Phosphor Imager Spares/Repair Lab
ITEM-42477
Molecular Dynamics Storm 860 Molecular Phosphor Imager – Spares/Repair
This item was removed from a university laboratory where it was surplus to requirements.
The system powers on, with cooling fans and status lights operating. No further testing was possible due to the absence of a control PC and software.
The previous owner reported it as faulty, but no specific faults were disclosed.
Includes:
- Imager unit only
- 1 x data cable
£ 500.00 (ex. VAT) 1 in stock
Leica AODS 20200-8 Laser Modulator Lab
ITEM-44501
Leica AODS 20200-8 Laser Modulator Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Power supply not included.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Perkin Elmer HS40XL Headspace Sampler Lab Spares/Repairs
ITEM-44629
Perkin Elmer HS 40XL Headspace Sampler Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on. However, the display screen is not functional, preventing further testing.
Therefore, it is listed as Spares/Repair.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Sanyo MDF-U442 Medical Freezer Lab Spares/Repairs
ITEM-44667
Sanyo MDF-U442 Medical Freezer Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, but it is not functional as it stays at ambient room temperature and triggers the alarm when the desired temperature is set.
Therefore, it is listed as Spares/Repair.
Items 1901 to 1950 of 2763