All Products
Items 1041 to 1060 of 3200
£ POA 1 in stock
Electrolab Fermac 260 pH Controller - PN U9300-0010 Lab
ITEM-20324
This Electrolab Fermac 260 pH Controller was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition but there are signs of prior use, such as stains and rust.
The item powered on fine and both pumps turned without issue though the acid pump moves even after changing 'prime'.
The lab it was removed from informed us that it has "slow reactions". It was not tested further.
£ POA 1 in stock
Electrolab Fermac 260 pH Controller Part No U9300-0010 Lab Spares/Repairs
ITEM-20325
This Electrolab Fermac 260 pH Controller was removed from a university lab where it was surplus to requirements.
The item is in fairly poor cosmetic condition and the panels are stained and badly rusted.
The item powered on fine and both pumps turned without issue. The acid pump continued to turn when switched to the alkali pump. The lab informed us that it has a fault where the alkali pump is not sucking. It was not tested further.
It is sold for spares or repairs.
£ POA 1 in stock
Electrolab Fermac 260 pH Controller PN/ U9300-0010 Lab
ITEM-20326
This Electrolab Fermac 260 pH Controller was removed from a university lab where it was surplus to requirements.
The item is in reasonably poor cosmetic condition and the panels are stained with residue marks. There is no plastic cover for the alkali pump.
The item powered on fine and both pumps turned without issue. The switch to change the prime is stiff and the acid pump continued to turn when switched to the alkali pump.
It was not tested further.
£ POA 1 in stock
Electrolab Fermac 260 pH Controller U9300-0010 Lab
ITEM-20320
This Electrolab Fermac 260 pH Controller U9300-0010 was removed from a university lab where they were surplus to requirements.
The item is in good cosmetic condition but there are some minor signs of prior use.
The item powered on fine and both pumps turned without issue.
The lab it was removed from claimed there were unusual readings given when used with multiple probes. It was not tested further.
£ POA 1 in stock
Electrolab Fermac 260 pH Controller U9300-0010 Lab
ITEM-20318
This Electrolab Fermac 260 pH Controller U9300-0010 was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition but it has scratches and dents on its sides/edges.
The item powered on fine and the pumps moved without issue. It couldn't be tested further.
£ 27,501.15 (ex. VAT) 1 in stock
Electrolab FerMac 310 Fermenters and Vessels inc Cooling Supply & Bambi VTS75
ITEM-18657
This system is being sold on behalf of one of our clients. It is not currently at our site but viewings can be arranged.
Electrolab Fermenters and Vessels inc Cooling Supply & Bambi VTS75
Originally purchased in May 2019, this system is no longer required by the Lab
This system has been validated and used minimally to run a couple of tests only
£ 2,912.86 (ex. VAT) 1 in stock
Electrolab Fermentation / Bioreactor System, 300 Stirrer Control, 351, 270 Pump
ITEM-14263
Electrolab Stirring System With Multiple Elements.
This item was removed from a lab during a clear out.
The sale comprises of:
Electrolab System:
1 x Stirring jar 19cm H x 13cm.
1 x Stirring jar 41cm H x 22cm.
1 x Electrolab 300 Stirrer Control with Stirrer jar 19cm H x 13cm.
Appears to work as it should.
1 x Electrolab 300 Stirrer Control with Stirrer jar 25cm H x 13cm.
Appears to work as it should.
1 x Electrolab 351 Measurement & Control & 1 x Electrolab 270 Feed Pump.
Both units power up and the pumps appear to work.
1 x Electrolab 351 Measurement & Control & 1 x Electrolab 270 Feed Pump.
Both units power up and the pumps appear to work.
1 x Carrera Pentium II PC with associated software.
Was previously not working, we replaced the power supply and now it is working fine.
1 x RS232 Box. Powers up when switched on.
Plus various cables and connectors for the system.
Please note:
We do not know if there is a full set of cables to make a full working system.
We have tried to be as detailed as possible with this system.
Although we cannot confirm the operational condition of it.
We would suggest that a full service and inspection is carried out prior to use.
Please see photos for further details.
Ask if you require more.
We have lots of detailed photo of the various units.
£ POA 1 in stock
Electrolab pH Controller Fermac 260 U9300-0010 Lab Spares/Repairs
ITEM-20319
This Electrolab pH Controller Fermac 260 U9300-0010 was removed from a university lab where it was surplus to requirements.
The item is in reasonably poor cosmetic condition. It has scratches and dents on its sides/edges. There are rust marks on the sides and its base which is fairly badly rusted.
The item powered on fine and the acid pumped turned without issue. The alkali pump would only turn on the 'prime' furthest from it. The alkali pump was also making an audible noise while turning. The acid pump didn't make any such noise.
It couldn't be tested further.
It is sold for spares/repairs
£ 524.66 (ex. VAT) 1 in stock
Electrolux Medical Laboratory Freezer Model MRF280 Lab
ITEM-17305
This Electrolux Medical Laboratory Freezer Model MRF280 was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included) It reached -34˚C.
It is in good cosmetic condition but has some marks from use. The bottom panel under the door appears to be missing.
The internal dimensions are: 145x45x37cm
£ 746.56 (ex. VAT) 1 in stock
Electrolux T5130 Commercial Condenser Tumble Dryer 6kg Capacity
ITEM-14177
The unit was removed from a care home as surplus to requirements prior to a building closure. We were assured the unit was in good working order prior to removal.
At our site, we have not tested it because we have not wired it in.
Good used cosmetic condition.
All the plastic 'bars' have been snapped off the lower filter section behind the door.
This won't affect operation in any way.
Top has a lot of the plastic protection film stuck under it.
£ POA 1 in stock
Electromantle ME. Electrothermal EME6 0250/CE MK1 Heating Mantle Lab
ITEM-19008
This Electromantle ME. Electrothermal EME6 0250/CE MK1 Heating Mantle was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It reached and held at 119˚C on the lowest setting and 187˚C on the highest.
It is in reasonably good cosmetic condition but there is some flaking paint around the base of the clamps.
It comes with 6 clamps which are slightly rusted.
£ 112.53 (ex. VAT) 1 in stock
Electronic Components, Circuit Boards etc from a Sorvall Combi Plus Centrifuge
ITEM-05398
These Electronic Components, Circuit Boards etc were pulled from a working Sorvall Combi Plus Centrifuge Centrifuge which originated in a Lab in a top UK University. Would be ideal for spares/repair.
£ 666.13 (ex. VAT) 1 in stock
Electronic Control Panel Balzers UHV Thin Film Deposition Chamber UMS 630 Lab
ITEM-15937
This Electronic Control Panel/Cabinet was removed from a Balzers UMS 630 UHV Thin Film Deposition Chamber.
The chamber was running, but the PC failed, and the lab could not justify recomissioning new software, so they decided to sell the machine.
We sold the chamber seperately, and the buyer did not need this control panel.
The condition of the components is unknown but they appear to be in good used cosmetic condition.
The unit is untested.
Unit dimensions: 81cm L x 45 cm W x 101cm H.
£ POA 1 in stock
Electrothermal Digital Controller MC 810 Cat no. MC810 MK2 Lab Spares/Repairs
ITEM-18433
This Electrothermal Digital Controller was removed from a university lab where it was surplus to requirements.
The unit powers up but the attached cable has been cut off. It is in reasonably good cosmetic condition but has some marks from use.
It is sold for spares or repairs due to the cut cable.
£ 89.59 (ex. VAT) 4 in stock
Electrothermal Electromantle EM250/CE Heating Mantle 250mL Lab
ITEM-14478
Electrothermal Electromantle EM250/CE Heating Mantle.
This item was removed from a lab as surplus to requirements.
Electrothermal Heater.
Cat No EM 0250/CE
250ml.
450degC Max.
Have been tested and appear to work as they should.
Used cosmetic condition.
Various marks etc.
£ 87.74 (ex. VAT) 1 in stock
Electrothermal Electromantle Flask Heating Mantle Lab
ITEM-17108
This Electromantle Flask Heating Mantle was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (thermometer not included in sale). The maximum temperature is 328C.
The unit is in reasonably good cosmetic condition but does show signs of age and wear.
£ 57.74 (ex. VAT) 1 in stock
Electrothermal EM0100/CE Heating Mantle Lab
ITEM-10410
This unit was removed from a lab during a clearout.
On testing it reached 105C so appears to be in working order.
£ 78.54 (ex. VAT) 1 in stock
Electrothermal EM0100/CE MK5 Electomantle Heating Mantle Lab 100mL
ITEM-13047
This unit was removed from a university lab as surplus to requirements.
The unit was tested at a variety of temperatures and appears to be in good working order.
£ 70.25 (ex. VAT) 2 in stock
Electrothermal EM0250/CE 250mL Heating Mantle Lab 300C
ITEM-09158
This unit was removed from a lab as surplus to requirements.
It appears to be in good working order and reaches 300C.
£ 141.85 (ex. VAT) 1 in stock
Electrothermal EM0250/CE MK5 Electomantle Heating Mantle Lab 250mL
ITEM-13049
This unit was removed from a university lab as surplus to requirements.
The unit was tested at a variety of temperatures and appears to be in good working order.
Items 1041 to 1060 of 3200