All Products
Items 1061 to 1080 of 3286
£ POA 1 in stock
Ekom DK50-10 S/M Mobile Air Compressor Lab
ITEM-20493
This Ekom DK50-10 S/M Mobile Air Compressor was removed from a university lab where it was surplus to requirements.
The unit powers up and the needle moved up to 6.5bar. It has not been tested further.
It is in good cosmetic condition but has some marks from use.
Specs
-Air tank 10L
-Run Time: 00714[29]
-Compressor p max 8 bar
-P out, P max (abs) 6.5 bar
£ 83.24 (ex. VAT) 1 in stock
Elco 4-017-1563 Fan Motors Type 3FGB-CO 85-38/5 Fan Deck Lab
ITEM-15915
Elco 4-017-1563 Fan Motors Type 3FGB-CO 85-38/5
This unit was removed from a university laboratory where it was surplus to requirements.
We were unable to test the unit but it is in good cosmetic condition.
£ 452.68 (ex. VAT) 1 in stock
Elcometer SCM 400 Salt Contamination Meter With Case and Accessories Lab
ITEM-14336
SCM 400 Salt Contamination Meter.
This item was removed from a lab during a clear out.
Elcometer SCM400.
Salt contanimation meter.
Appears to work as it should.
Requires 9v battery (not included).
When tested it did read salt levels on a random piece of paper towel.
However it has not been fully tested.
We would suggest that a full service and inspection is carried out prior to use.
Comes with:
Original carry bag.
Pouch of gloves.
Small baggies.
2 x pairs of plastic tweezers and a syringe.
Bag of pressure support pads.
Item appears to be in good cosmetic condition.
Please see photos for further details.
£ POA 1 in stock
Electrical Geodesics GPS 100 EEG Photogrammetry System C-PKG-GPS-1000-000 Lab
ITEM-19443
This Electrical Geodesics GPS 100 EEG Photogrammetry System was removed from a university lab where it was surplus to requirements.
The unit powers up and the controller to raise and lower it seems to be in working order. It requires a PC and software to test it any further.
It is in good cosmetic condition but has some marks from use.
The max height of it fully raised is 196cm.
£ 165.01 (ex. VAT) 1 in stock
Electrolab Fermac 250 Modular Bench-Top + Bioreactor System
ITEM-10288
This set was removed from a chemical engineering lab during a clearout.
We are not sure if it is the complete system, although the lab manager said that all the equipment from the store was working when last used.
£ 235.28 (ex. VAT) 1 in stock
Electrolab Fermac 250 Modular Bench-Top Bioreactor System
ITEM-10235
This unit was removed from a chemical engineering lab as surplus to requirements.
We have not tested the system.
£ 28,534.91 (ex. VAT) 1 in stock
Electrolab FerMac 310 Fermenters and Vessels inc Cooling Supply & Bambi VTS75
ITEM-18657
This system is being sold on behalf of one of our clients. It is not currently at our site but viewings can be arranged.
Electrolab Fermenters and Vessels inc Cooling Supply & Bambi VTS75
Originally purchased in May 2019, this system is no longer required by the Lab
This system has been validated and used minimally to run a couple of tests only
£ 3,142.41 (ex. VAT) 1 in stock
Electrolab Fermentation / Bioreactor System, 300 Stirrer Control, 351, 270 Pump
ITEM-14263
Electrolab Stirring System With Multiple Elements.
This item was removed from a lab during a clear out.
The sale comprises of:
Electrolab System:
1 x Stirring jar 19cm H x 13cm.
1 x Stirring jar 41cm H x 22cm.
1 x Electrolab 300 Stirrer Control with Stirrer jar 19cm H x 13cm.
Appears to work as it should.
1 x Electrolab 300 Stirrer Control with Stirrer jar 25cm H x 13cm.
Appears to work as it should.
1 x Electrolab 351 Measurement & Control & 1 x Electrolab 270 Feed Pump.
Both units power up and the pumps appear to work.
1 x Electrolab 351 Measurement & Control & 1 x Electrolab 270 Feed Pump.
Both units power up and the pumps appear to work.
1 x Carrera Pentium II PC with associated software.
Was previously not working, we replaced the power supply and now it is working fine.
1 x RS232 Box. Powers up when switched on.
Plus various cables and connectors for the system.
Please note:
We do not know if there is a full set of cables to make a full working system.
We have tried to be as detailed as possible with this system.
Although we cannot confirm the operational condition of it.
We would suggest that a full service and inspection is carried out prior to use.
Please see photos for further details.
Ask if you require more.
We have lots of detailed photo of the various units.
£ 1,358.06 (ex. VAT) 1 in stock
Electrolab Filmstar Photoplotter FP-8000 Plotting System Lab
ITEM-14837
This Filmstar Photoplotter FP-8000 was removed from a university where it was surplus to requirements.
The unit is in very good cosmetic condition but has been previously used.
It has been powered up but not tested any further.
It comes with a power supply, a copy of the manual and 3 software discs:
FP-8000 Control Software.
Viglen Desktop Driver CD.
Transverter Pro V4.0.
£ 525.00 (ex. VAT) 1 in stock
Electrolux Medical Laboratory Refrigerator Fridge Model MRF280 Lab
ITEM-17305
This Electrolux Medical Laboratory Refrigerator Model MRF280 was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included) It reached -34˚C.
It is in good cosmetic condition but has some marks from use. The bottom panel under the door appears to be missing.
The internal dimensions are: 145x45x37cm
£ 848.79 (ex. VAT) 1 in stock
Electrolux T5130 Commercial Condenser Tumble Dryer 6kg Capacity
ITEM-14177
The unit was removed from a care home as surplus to requirements prior to a building closure. We were assured the unit was in good working order prior to removal.
At our site, we have not tested it because we have not wired it in.
Good used cosmetic condition.
All the plastic 'bars' have been snapped off the lower filter section behind the door.
This won't affect operation in any way.
Top has a lot of the plastic protection film stuck under it.
£ POA 1 in stock
Electromantle ME. Electrothermal EME6 0250/CE MK1 Heating Mantle Lab
ITEM-19008
This Electromantle ME. Electrothermal EME6 0250/CE MK1 Heating Mantle was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It reached and held at 119˚C on the lowest setting and 187˚C on the highest.
It is in reasonably good cosmetic condition but there is some flaking paint around the base of the clamps.
It comes with 6 clamps which are slightly rusted.
£ 112.53 (ex. VAT) 1 in stock
Electronic Components, Circuit Boards etc from a Sorvall Combi Plus Centrifuge
ITEM-05398
These Electronic Components, Circuit Boards etc were pulled from a working Sorvall Combi Plus Centrifuge Centrifuge which originated in a Lab in a top UK University. Would be ideal for spares/repair.
£ 707.54 (ex. VAT) 1 in stock
Electronic Control Panel Balzers UHV Thin Film Deposition Chamber UMS 630 Lab
ITEM-15937
This Electronic Control Panel/Cabinet was removed from a Balzers UMS 630 UHV Thin Film Deposition Chamber.
The chamber was running, but the PC failed, and the lab could not justify recomissioning new software, so they decided to sell the machine.
We sold the chamber seperately, and the buyer did not need this control panel.
The condition of the components is unknown but they appear to be in good used cosmetic condition.
The unit is untested.
Unit dimensions: 81cm L x 45 cm W x 101cm H.
£ POA 1 in stock
Electrothermal Digital Controller MC 810 Cat no. MC810 MK2 Lab Spares/Repairs
ITEM-18433
This Electrothermal Digital Controller was removed from a university lab where it was surplus to requirements.
The unit powers up but the attached cable has been cut off. It is in reasonably good cosmetic condition but has some marks from use.
It is sold for spares or repairs due to the cut cable.
£ 101.86 (ex. VAT) 4 in stock
Electrothermal Electromantle EM250/CE Heating Mantle 250mL Lab
ITEM-14478
Electrothermal Electromantle EM250/CE Heating Mantle.
This item was removed from a lab as surplus to requirements.
Electrothermal Heater.
Cat No EM 0250/CE
250ml.
450degC Max.
Have been tested and appear to work as they should.
Used cosmetic condition.
Various marks etc.
£ 89.91 (ex. VAT) 1 in stock
Electrothermal Electromantle Flask Heating Mantle Lab
ITEM-17108
This Electromantle Flask Heating Mantle was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (thermometer not included in sale). The maximum temperature is 328C.
The unit is in reasonably good cosmetic condition but does show signs of age and wear.
£ 60.12 (ex. VAT) 1 in stock
Electrothermal EM0100/C Heating Mantle Lab Electrothermal
ITEM-10416
This unit was removed from a lab as surplus to requirements.
With our testing it reached over 100C so appears to be in working order.
Please note our thermometer is not included with the sale.
£ 65.06 (ex. VAT) 1 in stock
Electrothermal EM0100/CE Heating Mantle Lab
ITEM-10410
This unit was removed from a lab during a clearout.
On testing it reached 105C so appears to be in working order.
£ 89.30 (ex. VAT) 1 in stock
Electrothermal EM0100/CE MK5 Electomantle Heating Mantle Lab 100mL
ITEM-13047
This unit was removed from a university lab as surplus to requirements.
The unit was tested at a variety of temperatures and appears to be in good working order.
Items 1061 to 1080 of 3286