Palas Solid Particle Dispenser RGB 1000 & 2 x Hauke DMA-10/1000 Diffusion Tubes

This was removed from a university lab where it was surplus to requirements.

The set is in reasonable cosmetic condition but there are scratches and signs of wear. One of the buttons is cracked and missing its top.

The Dispenser powered on fine and it responded to inputs from the control panel but we were unable to test it further.

The diffusion tubes are untested.

The components included are as follows:

1x Solid Particle Dispenser

Model: RGB 1000

1x Unbranded diffusion tube

2x Hauke diffusion tubes

Model: DMA-10/1000

Izon Science Ltd - qViro Virus Viral  Particle Analysis System

This was removed from a university lab where it was surplus to requirements.

The item powers on and comes with a USB cable and power supply. It is in good used cosmetic condition.

This Leybold Trivac Ruvac Pump System was removed from a university lab where it was surplus to requirements.

The unit has been inspected and refurbished by a service engineer.

The unit is in great condition and performs well at 6 x 10-4 M/bar. It has CF40/65 oil filtration and ARS 40/65 oil mist filtration.

The set runs on PFPE fluid.

The Trivac was serviced on 09/22, Job no. S01064. Performing at 3x10-3 m/BA.

The Ruvac was serviced on 09/22, Job no. S01064. Performing at 6x10-4.

It is made up of the following;

1x Leybold Vacuum Adapter for Ruvac 150/250

Nr: 165 30

1x Leybold Vacuum Ruvac

Type: WS251 PFPE

11727

Nr: 20200017781

1x Trivac

Model: ARS 40-65

Nr: 18957

20900110457

1x Trivac

Model: CF 40-65

Nr: 10197

20200027963

1x Emod Motoren

Type: VJF 9072-100

Nr: 03612840

Nuaire Cellgard Class 2 Biological Safety Cabinet NU-480-400E

This was removed from a laboratory where it was surplus to requirements.

The item powers on with airflow and both white & UV lights working.

The item is in good cosmetic condition with minor marks from use.

Cabinet dimensions - D89 W137 H150cm

Frame dimensions - D79 W118 H83cm

Internal workspace dimensions - D55 W117 H60cm

This Converteam Hydro-Air MV3000 Power Converter  Type - PMVJ3071-3001 was removed from a university lab where it was surplus to requirements.

The unit powered up but was not tested further. The on/off switch has a bit missing to be able to turn on the unit from outside the door. The output power cable requires a plug.

The unit is in reasonably good cosmetic condition with some marks from use.

This Peak Scientific N300DR Nitrogen Gas Generator was removed from a university lab where it was surplus to requirements.

We had it inspected by a qualified service engineer. It powers on and builds up pressure to >100 psi with no leaks. All parts passed diagnostics.

It is in very good cosmetic condition with only minor marks from use.

This Pfeiffer Vacuum D-35614 Asslar Turbo Pump Mod - TMH 520 IS was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has been used. The fan is very clean. It comes in a Pfeiffer Vacuum packaging box but we don't think it is the original box for this pump as the model number is different.

It has not been tested.

Large Static Catering Trailer Street Food + Refrigerators & Appliances

This was removed from a university lab where it was surplus to requirements.

It is equipped with the following appliances:

3 X Lec Under Counter Fridges-untested

1 X Tefcold Tall Glass Doored Fridge-untested

1 X Jbg2 Lsu03 Counter/serve Over Fridge-untested

Double Round Sinks With Mixer Tap-untested

Large Fresh Water Storage Tank-untested

Strip Lighting-untested

Many Double 240v Sockets-untested

This unit is untested and would require to be fully checked out by a qualified electrician. The water tank will need to be flushed and treated. The unit does require some remedial repairs to the walls due to water ingress at the base corners. One of the LEC fridges requires a new door hinge.

A lot of the damage is superficial and is just down to the graphics peeling off. Overall it is in good condition but would benefit from a deep clean.

The electrics are currently via a 415V 32A connection. However, there are no three-phase appliances or outlets in the unit and this could be altered to a 240V 32A plug very easily.

We don't have the keys to the door or the water filler cap though there are keys present to lock the fridge doors. Due to its size and weight, a lorry equipped with a hiab or a large forklift with extended forks is required to move the unit.

This Biotage SP1 Flash Chromatography System was removed from a university lab where it was surplus to requirements.

The unit powers up but the monitor is faulty. We connected it to an external monitor and were able to power up the system and access the software. The battery for the motherboard with likely need replacing at some point.

The system is comprised of the following modules.

1 x Biotage SPXE 10810016;

1 x Ecom Fixed Wavelength UV Detector ;

1 x Biotage SP1 System & Monitor.

Bruker Agena Bioscience  Sequenom MT Analyser & MassARRAY NanoDispenser

This system was removed from a university lab where it was surplus to requirements.

We have set the system up and everything powers up.

The MassARRAY NanoDispenser has been run in standalone mode as it has its own PC built-in. We have the passwords for the software. We have had the unit home its dispenser, it appears to respond to all commands.

After re-seating the Acqiris PCi card in the PC, we were able to start the Acqiris Live 2.4 program.

The main PC has the following software installed:

Acqiris Digitizer/AcqirisLive Version 2.4 Release 8 Build 0.

Acronis True Image.

Bruker Daltonics FLEXControl.

CMU 1394 Camera Demo.

MassARRAY Typer Version 4.0.

Plus a lot more.

We were unable to get the PC to communicate with the MT Analyser via the com port.

Included are;

1x Sequenom MT Analyser

Model MT9

1x MassARRAY NanoDispenser.

Accessories:

2x HP Monitors

1x LG PC

Model IPC-5120

Cables:

2x Male to Male VGA Cables

1x HP Male DVI to 2x Female VGA Cable

1x Mini gender changer Ribon cable 9 pin Male to 2x 9 pin Female cable

1x 9 pin Female to Female cable

1x D-SUB mixed contact connector to 3x BNC Cable.

1x TRIPP-LITE Compact Flexible Keyboard:

1x HP Keyboard

1x HP Mouse

Model no. M-SBJ96

1x Glass Flask

Volume: 3L

1x Allen Key

8MM

Zoneare Z.One Ultra SmartCart and Scan Engine Ultrasound System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested because there are no transducers and probes with it.

Zoneare Z.One Ultra SmartCart and Scan Engine Ultrasound System

Part no. 85000-00

SN - 03062C308H

Zoneare Z.One Scan Engine

PN - 82001-20

SN - 03002S208H

Comes with Quick Reference Guide

Zonare Operator Manual 3.5 Part no. Q00144 3/08

Extendable height up to 152cm

Monitor folds down for storage.

This Christ Alpha 2-4 LD Freeze Drier Type 101042 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good working order. The vacuum pump we are told is 16 years old but is functional.

It is in good cosmetic condition with minor marks from use.

Christ Freeze Drier

Model - Alpha 2-4 LD

Type - 101042

SN - 11075

Vacubrand Rotary Vane Vacuum Pump

Model - RZ 2.5

SN - 31473411

It comes with Vacubrand Pump Oil (1L)

This Bellco Biotechnology Cell Production Roller Apparatus was removed from a university lab where it was surplus to requirements.

The unit powers up and runs up to 4000rpm. It is in good working order, and has had a brand new dial fitted.

It is in good cosmetic condition with minor marks from use.

9 x Roller levels/shelves

The motor was replaced on 13/12/19

This Leica VT1000M Vibrating Blade Microtome was removed from a university lab where it was surplus to requirements.

The item powers on and the forward/reverse switch works with the speed working to the dial setting. The top section with the lamps and the magnification window is missing. It seems to be in otherwise working condition.

It is in reasonable cosmetic condition but has marks from use.