All Products
Items 701 to 720 of 3302
£ POA 1 in stock
Blak-Ray UV Light Bed Model C50 Transilluminator Lab
ITEM-16819
This Blak-Ray UV Light Bed Transilluminator was removed from a university lab where it was surplus to requirements.
The unit is in good, used cosmetic condition but it does have some scratches and signs of use.
It appears to work as it should. Our light meter showed 248 on Hi Setting.
The light area is 33cm x 23cm.
£ 225.00 (ex. VAT) 1 in stock
Blank Flange UHV Chamber Part - Shutter, Cover, Cap, Blank Lab
ITEM-17175
This Blank Flange UHV Chamber Part was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
There is a cavity on the underside that is 120mm in diameter and 20mm deep.
£ POA 1 in stock
Boc Edwards Speedivalve SP25K N 9Bar Fluoroelastomer Diaphragm Valve Lab
ITEM-18758
This Boc Edwards Speedivalve SP25K N 9Bar Fluoroelastomer Diaphragm was removed from a university lab where it was surplus to requirements.
The unit is brand new and sealed, but there is a hole in the bag.
£ 375.00 (ex. VAT) 1 in stock
Boekel Illumina Hybridisation Oven / Incubator Model 5420 Lab
ITEM-18313
This Boekel Illumina Hybridisation Oven/Incubator Model 5420 was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has some marks from use. There is a rubber mat with it for the shaker tray.
The unit powers up and it spun well at 5 (Min), 30 and 60 (Max) RPM.
It was tested with a digital thermometer (not included).
When tested to get to 37˚C it had to be set to 35.7˚C
When tested to 37˚C it was actually 39.5˚C on the thermometer.
When tested to 100 degrees (Max) it only displayed 99˚C but was recorded at 105.8˚C on the thermometer.
Internal dimensions: 34cm L x 24.5cm W x 22.5cm H.
Shelf dimensions: 20.5cm L x 28cm W.
Shelf dimensions inside the lip: 20cm L x 27.5cm W.
£ 145.03 (ex. VAT) 1 in stock
Boekel Model 110001 Dry Block Heater Lab Low/High
ITEM-12801
This dry block heater was removed from alab as surplus to requirements.
It appears to be in good working order, and heats to 72degs on low and 128 on high.
£ 109.51 (ex. VAT) 1 in stock
Boekel Scientific MicroCooler II Model 260010 Cooling Dry Bath Lab
ITEM-18200
This Boekel Scientific MicroCooler II Model 260010 Cooling Dry Bath was removed from a university lab where it was surplus to requirements.
The unit powers on and was set to -19 but only reached -14 after being left on for 8 hours. This seems to be the lowest temperature it will work at.
It is in reasonably good cosmetic condition but has marks from use.
£ 1,358.99 (ex. VAT) 1 in stock
Bohlin CS (Constant Stress) Rheometer
ITEM-12925
Bohlin CS (Constant Stress) Rheometer
This set was removed from a university lab as surplus to requirements.
We were assured the set was in working order prior to removal from the lab.
£ 391.02 (ex. VAT) 1 in stock
BOMEM DA3 Series Spectrophotometer System Lab Spares/Repair
ITEM-08952
BOMEM DA Series Spectrophotometer System
We were informed by a Bomem engineer that this system is not complete as the "Scan Tube" is missing. Therefore the unit would only be suitable as spare parts.
Therefore the unit is sold as spares / repairs.
£ 4,876.85 (ex. VAT) 2 in stock
Bose ElectroForce SDWS-1 Mechanical Test Lab Tension Compression Axial Rotation
ITEM-16833
This Bose ElectroForce System was removed from a university lab where it was surplus to requirements.
The lab reported: "This is a Bose testing machine capable of tension/compression, axial rotation and lateral bending."
The unit is in good, used condition but it does have some scrapes/scratches and various signs of use.
The system consists of:
1 x Bose ElectroForce SDWS-1 Main Unit.
1 x Dell Optiplex 755 Bose PC with WinTest Software and 2 x PCi cards.
The PC has had the internal battery changed and powers up fine. The WinTest software has been started. it also comes with 1 x Dell monitor, keyboard and mouse.
1 x Wintest Software Manual.
1 x Bose P/N 310782 Heater Temp/Fluid Temp Unit.
The unit powers up fine.
1 x Bose PCi1 P/N 310493.
The unit powers up fine.
1 x Unknown machined aluminium base container.
1 x Box full of cables to connect the system up.
None of the units have been tested further.
Please note, the trespa table is NOT included in this sale.
We have two of these units in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.
£ 12,856.60 (ex. VAT) 1 in stock
Boundary Layer Full-Scale Wind Tunnel Aeronautical Engineering Device
ITEM-12359
Full-Scale Aerodynamic Wind Tunnel Aeronautical Engineering Device
This system is being removed from a leading UK university engineering department as it is no longer required.
It is in full working order.
£ 64.65 (ex. VAT) 1 in stock
Box of 1000 Sarstedt Microvette 200 K3E Automated Processing Tubes Lab
ITEM-17589
This Box of 1000 Sarstedt Microvette 200 K3E Automated Processing Tubes was removed from a lab during a clearance.
The box is brand new and sealed however it appears to have expired in Nov 2021.
£ 121.93 (ex. VAT) 2 in stock
Box of 25 x MACS Miltenyi Biotec Triple Sampling Adapters Lab 170-076-609, 76609
ITEM-17580
Box of 25 x MACS Miltenyi Biotec Triple Sampling Adapters
These were removed from a lab as surplus to requirements. They are brand new and sealed in the box.
£ 73.15 (ex. VAT) 1 in stock
Box of 4000 x 5ml Round Bottom Test Tubes Without Caps Lab
ITEM-17596
Box of 4000 x 5ml Round Bottom Test Tubes Without Caps
These were removed from a lab during a clearance.
They are brand new and sealed in 8 bags of 500. We are unsure of the brand, but we suspect they are VWR.
£ 56.25 (ex. VAT) 1 in stock
Box of 46 Thermo Scientific Sorvall X50 PA ULTRACRIMP TUBES 11,5ML PN:03526 Lab
ITEM-15622
Box of 46 Thermo Scientific Sorvall X50 PA ULTRACRIMP TUBES 11,5ML
These were removed from a laboratory where they were surplus to requirements.
Cat No 03987.
The units are brand new, but was originally a box of 50, of which 4 have been used up. Also included are some crimp caps.
£ POA 1 in stock
Boxer 300/100L Top Loading Autoclave Steam Steriliser L2255 Lab Spares / Repairs
ITEM-18017
This Boxer 300/100L Top Loading Autoclave Steam Steriliser was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition but has been well used.
It does not power up and was not tested further.
Inner dimensions: 43cm L x 43cm W x 66cm H.
Basket dimensions: 37.5cm L x 37.5cm W x 27.5cm H.
Inner basket dimensions: 36cm L x 36cm W x 27cm H.
For spares or repairs.
£ POA 1 in stock
Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR Lab
ITEM-18169
This Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR was removed from a university lab where it was surplus to requirements.
The unit powers on but could not be tested further. It is in reasonably good cosmetic condition with marks from use.
Internal dimensions:-
Depth - 41cm
Width - 30cm
Height - 30cm
Holes size on tray - 21mm
£ POA 1 in stock
Boxer Front Loading Laboratory Steam Sterilising Autoclave Model 200/40LR Lab
ITEM-18168
This Boxer Front Loading Laboratory Steam Sterilising Autoclave Model 200/40LR was removed from a university lab where it was surplus to requirements.
The unit powers on but it wasn't tested further.
It is in reasonable cosmetic condition but has marks from use.
Inside dimensions:-
Depth - 45cm
Width - 33cm
Height - 27cm
Holes size on tray - 21mm
£ POA 1 in stock
Boxer Steam Sterilising Laboratory Autoclave 400/220L Lab Spares or Repairs
ITEM-18171
This Boxer Steam Sterilising Laboratory Autoclave 400/220L was removed from a university lab where it was surplus to requirements.
The unit does not power on and we were unable to open the door without it being powered up as we were unable to find the manual override switch.
It is in reasonably good cosmetic condition but it has marks from previous use.
£ 525.00 (ex. VAT) 1 in stock
Brady BBP33 Industrial Thermal Label Printer
ITEM-16877
This Brady BBP33 Industrial Thermal Label Printer was removed from a lab as surplus to requirements.
We were assured the unit was in working order when last used.
At our site, the unit powers on but has not been tested further. It is in very good cosmetic condition with only slight marks from use.
£ 106.22 (ex. VAT) 1 in stock
Brady BP-1344 Thermal Label Printer Model - DMX-E-4304 Lab
ITEM-18241
This Brady BP-1344 Thermal Label Printer Model - DMX-E-4304 was removed from a university lab where it was surplus to requirements.
The unit powers on but has not been tested further. It will require a 12v power supply (not included).
It is in reasonably good cosmetic condition but has some marks from use.
Items 701 to 720 of 3302