All Products

NEW ITEM

£ 1,160.00 (ex. VAT) 1 in stock

Labogene Scanlaf Class 1 Safety Cabinet Jupiter Basic 1800 MSC Lab

ITEM-32003

This Labogene Scanlaf Jupiter Basic 1800 MSC Class 1 Safety Cabinet was removed from a laboratory where it was surplus to requirements.

The cabinet is new and unused but has been powered up for testing. It is in excellent cosmetic condition but may have minor scuffs from being moved around.

The unit powers up and is in full working order.

Internal dimensions - L178 W60 H75cm

£ 1,160.00 (ex. VAT) 1 in stock

Set of 8 x Sartorius Stedim Biowelder Tube Holders (SH3,SH5,SH6)

ITEM-38724

These were removed from a working lab where they were surplus to requirements.

They are all in reasonably good cosmetic condition with marks form use.

Included are;

SH3 OD 7/16"

11,1 mm (Pair)

SH6 OD 3/8"

9,5mm (Pair)

SH6 OD 3,8"

9,5mm (Pair)

SH5 OD 5,16"

8mm (Pair)

£ 1,160.00 (ex. VAT) 1 in stock

DW Scientific MAC 500 Modular Atmosphere Controlled Glove Box System Lab

ITEM-30434

DW Scientific MAC 500 Modular Atmosphere Controlled Glove Box System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with some minor marks from use. The airlock works on both glove doors and you can feel the airflow inside.

Internal dimensions - D55.5 W85 H50cm

We tested it with a digital thermometer (not included)

When the temperature reached 37˚c, the thermometer read 37.7˚c.

When the temperature reached 45˚c (max) the thermometer read 46˚c.

RECERTIFIED ITEM

£ 1,155.00 (ex. VAT) 1 in stock

Bio Rad DNA Engine Dyad Model: PTC0220G Thermal Cycler Lab

ITEM-24873

This Bio-Rad DNA Engine Dyad Model: PTC0220G Thermal Cycler was removed from a university lab where it was surplus to requirements.

The unit has been fully inspected and tested by a service engineer. It is in full working order.

It is in very good cosmetic condition with only minor marks from use.

RECERTIFIED ITEM

£ 1,155.00 (ex. VAT) 1 in stock

Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB Lab

ITEM-28101

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a university lab where it was surplus to requirements.

The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it.

The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed.

It is in excellent cosmetic condition with some minor marks from use.

4 Shelves - 49.5 x 49.5cm

Internal dimensions - D52 W50 H55cm

NEW ITEM

£ 1,150.00 (ex. VAT) 1 in stock

Labogene Scanlaf Jupiter Basic 1800 MSC Class 1 Safety Cabinet Lab

ITEM-32000

This Labogene Scanlaf Jupiter Basic 1800 MSC Class 1 Safety Cabinet was removed from a laboratory where it was surplus to requirements.

The cabinet is new and unused but has been powered up for testing. It is in excellent cosmetic condition but may have minor scuffs from being moved around.

The unit powers up and is in full working order.

Internal dimensions - L178 W60 H75cm

£ POA 1 in stock

Binder KB 115 Lab Cooling Incubator Laboratory

ITEM-39708

This item is new in stock. Please enquire for further details.

£ 1,140.00 (ex. VAT) 1 in stock

Marzhauser SMC-2009 2-Axis Stepper Motor Stage Controller Lab

ITEM-23939

This Marzhauser SMC-2009 2-Axis Stepper Motor Control was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further. It is in excellent condition and is still in the box it was delivered in. We are unsure if it is brand new as the box has been opened, but it does look to be.

It is supplied with software and a manual.

NEW ITEM

£ 1,135.00 (ex. VAT) 1 in stock

Micromass Capillary CE Assy Kit M955420CC1-S for Waters Xevo Lab

ITEM-31722

Micromass Capillary CE Assy Kit M955420CC1-S

This was removed from a university lab where it was surplus to requirements.

Everything is boxed and the consumables are sealed.

Included are;

Micromass Capillary Electrophoresis/Electrochromatography Sprayer Users Guide

Parts:-

Probe Cover M955510BD1

C.E HV Cable Assy M955515BC1

Earth Tag M955514AD1

Capillary M955423BD1

C.E Assembly Spares Kit M955420CC4:-

Cable Clamp M955513AD1

Plug Cap - Valco ZC1 6070233

1/16 Valco Ferrule 6070135

Ingertight Nut - Anachem F125 6070186

Circlip 6364907

Capillary M955423BD1

1.15 I/D x 1.00 C/S O-Ring 5711945

M2 Plain Washer 5331014

Alltech Peek Union 32141 6367402

1/4 - 1/16 Union 6070235

M3 x 4 ST/STL Grub Screw 5316005

1/16 Valco ZN1 Nut 6060806

Ceramic Capillary Cutter 6028630

Special Screw M955370AD1

Fill Port 6060919

Liner - Anachem F182X 6072209

Liner - Anachem F185X 6072210

1/8 - 1/16 PTFE Ferrule T1640357

M2 x 6 ST/STL CH HD Screw 5314050

BS109 Viton O-Ring 5711061

Upchurch F300 Nut & Ferrule 6367401

Microlight Union - Anachem P7 6072208

Fused Silica - TSP050192 6490519

PTFE Tube - TTF110 6063002

Fused Silica - TSP075375 6490512

Fused Silica - TSP075200 6490520

PTFE Tube - TTF115 6060743

Peek Tube - Orange 0.020 Bore 6436002

1/16 x 1mm Bore PTFE Tube 6430206

£ 1,135.00 (ex. VAT) 1 in stock

Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 Lab

ITEM-30514

This Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 was removed from a university lab where it was surplus to requirements.

The pump has been tested with a controller (not included) and is in working order, but has not been tested under a vacuum.

It is in good cosmetic condition with minor marks from use.

SPARES/REPAIR ITEM

£ 1,135.00 (ex. VAT) 1 in stock

BMG Lab Technologies Fluostar Galaxy Microplate Reader Lab Spares/Repairs

ITEM-31557

This BMG Lab Technologies Fluostar Galaxy Microplate Reader was removed from a university lab where it was surplus to requirements.

The unit powers up but would not connect to a PC (not included) when we tried to test it. Other units would connect to this same PC, so we are sure it is the unit itself at fault, and not the PC.

It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

£ 1,135.00 (ex. VAT) 1 in stock

BECKMAN Model J2-21 Floor Standing Centrifuge Lab

ITEM-21249

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order but is not supplied with a rotor.

It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

£ 1,130.00 (ex. VAT) 1 in stock

Carbolite Laboratory Furnace Type VCF 12/5 Lab

ITEM-30288

This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in reasonably good cosmetic condition but has some marks from use.

£ 1,130.00 (ex. VAT) 1 in stock

Thermo Scientific Forma 905 -86 ULT Ultra-Low Temperature Freezer

ITEM-36995

Thermo Scientific Forma 905 -86 ULT Ultra-Low Temperature Freezer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order to -80˚C. It was tested with a digital thermometer (not included).

It is in reasonable cosmetic condition with marks from use. The filter cover is taped in place.

3 Shelves - 63 x 56cm

£ 1,130.00 (ex. VAT) 1 in stock

BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station Lab

ITEM-34875

BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

£ 1,125.00 (ex. VAT) 1 in stock

Scanlaf Mars 900 Biohazard Safety Cabinet Class 2 Lab

ITEM-31155

This Scanlaf Mars 900 Biohazard Safety Cabinet Class 2 was removed from a university lab where it was surplus to requirements.

The item powers on with both white and UV lights working. The airflow and the window are also in working order.

It is in reasonably good cosmetic condition with some marks from use.

Working area - 51 x 90cm

£ 1,120.00 (ex. VAT) 1 in stock

VG Scientific Wien Mass Filter for Ion Beam Filtering UHV Lab

ITEM-19542

VG Scientific Wien Mass Filter for Ion Beam Filtering UHV

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition but has not been tested.

£ 1,120.00 (ex. VAT) 1 in stock

Converteam Hydro-Air MV3000 Power Converter Type - PMVJ3071-3001

ITEM-24355

This Converteam Hydro-Air MV3000 Power Converter Type - PMVJ3071-3001 was removed from a university lab where it was surplus to requirements.

The unit powered up but was not tested further. The on/off switch has a bit missing to be able to turn on the unit from outside the door. The output power cable requires a plug.

The unit is in reasonably good cosmetic condition with some marks from use.

£ 1,120.00 (ex. VAT) 1 in stock

Nikon Microphot-FXA Fluorescence Microscope with HP-10101AF PSU & 4 x Objectives

ITEM-24299

This Nikon Microphot-FXA Fluorescence Microscope was removed from a university lab where it was surplus to requirements.

The PSU is missing so we were unable to power up the Microscope. It requires a Nikon PSM-4A. The power supply unit for the mercury lamp is present. The PSU is working but the bulb needs to be replaced.

The system is in reasonably good cosmetic condition with marks from use.

It has;

2x Nikon FX-350X 35mm film cameras attached via Nikon mounts.

1 x SOFT RTS 25.4 2mp slider with data lead.

1 x NIKON 4/0.10

1 x NIKON FLUOR 20 0.75 160/0.17

1 x NIKON FLUOR 40 0.85 160/0.11-0.23

1 x NIKON FLUOR 100 / 1.30 OIL 160/0.17

2 x CFWN D10 X/20

There is a PC with ISMOL Software & relevant PCI cards for connecting everything.

£ 1,115.00 (ex. VAT) 1 in stock

Grant Digital Flow Heater FH16-D Lab

ITEM-35195

This Grant FH16-D Digital Flow Heater was removed from a university lab where it was surplus to requirements.

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further.

It is in good cosmetic condition but has some marks from use.

All Products

Filters