This ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirements.

The unit had previously been in use up until the day it was removed. It was replaced with a new system. It is fully working.

The unit powered on with no problems at our facility. It is in excellent cosmetic condition.

It comes supplied with the PSU, USB lead, software CD, manuals and data books.

This MicroBeta TriLux Model:-1450 6 Detector 24/96 Well Scintillation Counter is being sold on behalf of a client. It is surplus to requirements.

Factory-trained Engineers refurbished it to the original instrument specification.

MicroBeta® TriLux is an instrument designed for liquid scintillation or luminescence detection of samples in microplates, tubes or on filters. This system has 6 detectors and is set up for 24/96 well plates and a 16-shelf plate loading magazine

Includes

6 Detectors

USB upgrade

Windows 10 upgrade.

PC Monitor

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further at our facility.

The system is in very good cosmetic condition with only minor marks from use.

Included are;

1 x Thermo Scientific Accela PDA Detector.

1 x Thermo Scientific Accela Autosampler.

1 x Thermo Scientific 1250 Pump.

Set of Accessories

This Hare 50TUP4C Hydraulic Press was removed from a university workshop where it was surplus to requirements.

The unit was previously hard wired so a plug was fitted for testing.

The screen is working.

External plugs are working. (plug tester not included)

SICK Light curtain is working.

The heaters are working.

Bed dimensions are: L 60cm x W 60cm x H 48cm.

The control key is supplied, but the side panel key is missing.

It is in good cosmetic condition with marks from use.

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel

This was removed from a university engineering department where it was surplus to requirements.

The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling.

It is in five sections:

Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor.

Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters.

Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm.

Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal.

Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

This HyClone 250L Single-Use Bioreactor SV50172.02 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

It comes with a 32A plug but has an adaptor with a standard plug. It also comes with 3 x Mixers & some other accessories.



This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university lab where it was surplus to requirements.

All units are in good used cosmetic condition but they do have various signs of general use.

The system consists of:

1 x Beckman Coulter Biomek Fxp CAT No A31842.

The unit powers up and both lights illuminate Green. It was not tested any further.

The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included.

1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.

It comes with:

2 x Stacker 10 hotels.

2 x FX Stacker 10 hotels.

1 x Stacker Carousel Pendant.

The mounting plate to connect it to the Fxp is included.

It also comes with a spare Microscan, operational condition is unknown.

1 x Lenovo PC with monitor, mouse & keyboard.

It has the Biomek Version 3.3 software installed.

1 x Jun-Air 1795001 Compressor.

The system also includes quite a few plates and consumables and various connection cables.

This Perkin Elmer Optima 2100 DV Optical Emission Spectrometer was removed from a university lab where it was surplus to requirements.

The instrument powers up but we were unable to test it further at our facility. The lab did inform us though, that it was fully working prior to removal.

It is in very good cosmetic condition with only minor marks from use.

This Olympus BX61 Microscope System was removed from a university lab where it was surplus to requirements.

All units are in good used cosmetic condition but they do have various signs of general use.

The microscope has been tested with one of our slides and appears to work as it should.

The system consists of:

1 x Olympus BX61 Microscope body. With Manual

Also fitted with:

1 x F-View Firewire Camera.

1 x Olympus UCMAD3 Camera Adapter.

1 x Olympus U-TV1X-2 Camera Adapter.

1 x Olympus BX-RFAA Motorized Reflected Fluorescence Illuminator (doesn't appear to be fitted with filters). With Manual.

Also includes the original top plate that was removed to fit this piece.

1 x Olympus U-D6REM (Sextuple) Revolving Nosepiece. With Manual.

1 x Olympus U-25ND25 Filter.

1 x Olympus U-25ND6 Filter.

1 x Olympus Manual Stage (Unsure on the model)

1 x Olympus U-HLDT-4 Slide Holder.

1 x Olympus U-LH100L-3 Lamp.

1 x OLYMPUS Objective:

UPlanApo

40x/1,00 Oil Iris

JAPAN

BFP1

C2

∞/-

2 x Olympus SWH10X-H/26.5 Eyepieces.

1 x Olympus BX-UCB PSU/Control Box. With Manual.

1 x Olympus U-HSTR2 Keypad Controller. With Manual.

And the cables to connect the control box and lamp.

It also includes C•Imaging Systems Simple PCI 6 Software V.6.1.0 & V.6.1.1 on CD and the USB Dongle.

This BD Biosciences ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirements.

The unit powers up but as there were no software discs or testing solutions with it we had our service engineer observe the system initialising without the cover on. They reported that it initialised as it should.

It is in very good cosmetic condition with only minor marks from use.

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with a minor scratch on the front.

The PSU is included.

This Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer was removed from a university lab where it was surplus to requirements.

The unit is in excellent cosmetic condition with little to no marks from use.

The lab reported that the unit cost around 60K when new. The item is in working condition. The manufacturer has gone into Administration so unable to offer further support for the printer.

Build Volume: 200mm x 157mm x 150mm.

This Thermo Scientific Multifuge X3R Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in excellent cosmetic condition with only minor marks from use.

Included with it is;

1 x Thermo Scientific Rotor Model No. 75003607

2x Swinging Buckets

Model 75003608

Max Load 800g

Max Speed 4700rpm

Max Cycle 70000 cycles

(2x) 5x50ml Tube Holders

2x Swinging trays/Microplate Buckets

75003617

Max load 500g

Max Speed 4700rpm

Max Cycle 120000 cycles

Autoclavable 121ºC

Fluidigm Biomark HD Genetic Analyser & IFC Controller HX with Accessories

This was removed from a university lab where it was surplus to requirements.

The units are all in good cosmetic condition with marks from use. Everything powers up. Starting up various programs did trigger the main unit to open its side door ready for a sample so it does appear that the PC and main unit are communicating. We have not run samples on the instrument but all tests and software appear to be running as expected.

Lot contains:

1 x Fluidigm Biomark HD Genetic Analyser.

1 x Fluidigm IFC Controller HX.

1 x Dell Monitor.

1 x VGA Cable.

1 x Logitech Keyboard.

1 x USB Male to USB Female Cable.

1 x 9 Pin Male to 9 Pin Female Serial Cable (Not VGA).

We logged into the IFC Controller HX successfully.

Settings on controller say:

Serial No: HX-10641.

Chips Supported: 136, 138, 139, 153, 154.

Filmware Version: 53

Software Version: 2.7-2014-12-02.

Last System Check: 19/11/2021.

The PC built inside the Biomark HD Genetic Analyser has had the user data removed but the software remains

Fluidigm Software:

Genetic Analysis.

BioMarkICP

EP1

BioMark.

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack

These were removed from a university lab where they were surplus to requirements.

They have been fully tested to incubate and shake by a service engineer. They are in full working order.

Inside dimensions - D57 W93 H44cm

Platform - 46 x 77cm

They come with brackets for stacking, but there are only 3 feet and one of them is broken.