Items 861 to 880 of 3286

Image of item

£ 72.29 (ex. VAT) 1 in stock

Clarkson Autolock Chuck With Accessories Metalworking Equipment

ITEM-12478

Clarkson Autolock Chuck With Accessories Metalworking Equipment

Image of item

£ POA 1 in stock

Classic King Edwards Potato Oven Spares/Repairs

ITEM-20117

This Classic King Edwards Potato Oven was removed from a university catering department where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer. The control knob has broken off but we think it was set to about 100˚C. It reached 84.8˚C on our thermometer but could not be tested further.


It is in pretty poor cosmetic condition with lots of rust around the dials. Inside it is in good condition.


The top compartment measurements are as follows:

length 43cm, width 32cm


The bottom compartment measurements are as follows:

length 31cm, width 32cm


Image of item

£ 128.93 (ex. VAT) 1 in stock

Cleaver Scientific The Cube Dry Bath Block Heater EL-02 Lab

ITEM-10022

This unit was removed from a lab as surplus to requirements.


We have powered the unit on and tested it and it appears to heat and work properly. It reached 150C with our testing.

Image of item

£ 476.18 (ex. VAT) 1 in stock

Clemens MWG AG Biotech Primus HT PCR System 2 Block Thermal Cycler Lab

ITEM-16772

This Clemens MWG AG Biotech Primus HT PCR System 2 Block Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit was powered on using cables from another unit we have in stock. The power cables are not included in this listing.


It powers up, but we were unable to open the blocks. We are unsure if software is required to do this or not.


The unit is in good cosmetic condition but has marks from use.



Image of item

£ 349.35 (ex. VAT) 1 in stock

Clemens MWG AG Biotech Primus HT PCR System 2 Blocks Thermal Cycler Lab

ITEM-10694

This system was removed from a lab as surplus to requirements.


The lab manager assured us the unit was in working order when last used. At our site we have powered it on but not tested it further.

Image of item

£ 364.67 (ex. VAT) 1 in stock

Clemens MWG AG Biotech Primus HT PCR System Dual Block Thermal Cycler Lab

ITEM-10696

This system was removed from a lab where it was surplus to requirements.


The lab manager assured us the unit was in working order when last used. At our site, we have powered it on but not tested it further.


Please note, that we have been informed this is not a stand-alone unit and will require a computer and a controller to work properly - these are not included.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Clifton NE2D Duo Water Bath 4 Litre + 8 Litre Digital DuoBath Lab Spares Repairs

ITEM-16037

This Clifton NE2D Duo Water Bath 4 Litre + 8 Litre Digital DuoBath was removed from a university laboratory where it was surplus to requirements.


The unit powers on but appears to be faulty on the 4-litre side. It doesn't heat up and keeps switching to "off". The 8-litre bath however seems to be functioning. It reached and held at 37C when set and reached 78C when set to 100, but did not get past 78C even after 6 hours of heating.


It is in very good condition cosmetically but has been used previously.





Image of item

£ 189.13 (ex. VAT) 1 in stock

Clifton-Kjeldahl 6x Positions Extraction Heater Lab 2700W (6x450W)

ITEM-12952

Clifton-Kjeldahl 6x Position Extraction Heater 2700W

This unit was removed from a lab as surplus to requirements.

It appears to be in full working order.


Image of item

£ 217.38 (ex. VAT) 1 in stock

CMA / Microdialysis 200 Refrigerated Microsampler + CMA 280 Fluorescenc Detector

ITEM-09445

This system was removed from a lab as surplus to requirements.


We have powered it on but not tested it further.

Image of item

£ POA 1 in stock

CNCSMART Plus CNC Router with Trend Routing Technology

ITEM-20670

This CNCSMART Plus CNC Router with Trend Routing Technology is being sold on behalf of a university workshop. It is surplus to requirements.


The unit is fully functioning but was disassembled for removal. It is currently located in Manchester.


The system was still in regular use and is in full working order.


It is in good cosmetic condition with the usual sorts of wear and tear from use.



Image of item

£ 75.00 (ex. VAT) 1 in stock

CO-114 Manual Crimper Microvial Bottle Capper Lab

ITEM-14532

CO-114 Manual Crimper.


Item was removed from a lab during a clear out.


Manual crimper.

CO-114 is the only marking on it.

Looks very similar to these:


We think that this is made for 13mm bottle caps.

As that is what the inside of the crimper head measures.


Could benefit from a service as the collars are slightly jamming.

Used cosmetic condition.


Please see photos for more details.

Image of item

£ POA 1 in stock

CO2 Sensor LC 07-40 24118B & Heads 1383 C20-20 1238 C20-5 Lab

ITEM-18447

This CO2 Sensor LC 07-40 24118B & Heads were removed from a university lab where it all was surplus to requirements.


Nothing has been tested but it is in good cosmetic condition.


Included is;


1 x CO2 Sensor LC 07-40 24118B


2 x Sensor Heads

1383 C20-20

1238 C20-5


1 x Power supply


1 x Cable




Image of item

£ 207.93 (ex. VAT) 1 in stock

Coherent Innova 200 Argon Ion Laser With Transformer and Controller

ITEM-08052

Coherent Innova 200 Argon Ion Laser with Transformer and Controller came from a working Lab in a top UK university but is now surplus to requirements. We were informed by our contact at the Uni that the Laser is in fully working order, however we haven't tested it ourselves.


You will need to conduct all and any safety tests prior to use to ensure the unit is safe and operating correctly.

Image of item

£ 565.86 (ex. VAT) 1 in stock

Coherent Innova 300 FRED Laser, Transformer & Controller with Key Lab

ITEM-05562

This Coherent Innova 300 FRED Laser, Transformer & Controller with key came from a working Lab in a top UK University but is now surplus to requirements.  We were informed by our contact at the University that the Laser is in good working order.

Image of item

£ 304.53 (ex. VAT) 1 in stock

Coherent Innova 300C Laser + Innova I300C-FRED Power Supply & Controller Lab

ITEM-12670

System is in good condition, includes a Laser Unit, Power Supply, Controller/Remote, Ethernet Cable & Pipe.


Unit was removed from a laser lab as surplus to requirements. We were assured it was in working order.


At our site we have not tested the system.

Image of item

£ 304.53 (ex. VAT) 1 in stock

Coherent Innova 300C Laser Head + 190C-4 Power Supply, 1300C Controller, Lab

ITEM-12671

System is in good condition, includes a Laser Unit, Power Supply, Controller/Remote, Ethernet Cable & Pipe.

Power Supply has some scratches but overall its ok!


Unit was removed from a laser lab as surplus to requirements. We were assured it was in working order.


At our site we have not tested the system.

Image of item

£ 481.26 (ex. VAT) 1 in stock

Coherent Innova 300C Laser Head, I190C-4 Power Supply & I300C Controller Lab

ITEM-12673

System is in good condition, includes a Laser Unit, Power Supply, Controller/Remote, Ethernet Cable & Pipe.


Unit was removed from a laser lab as surplus to requirements. We were assured it was in working order.


At our site we have not tested the system.

Image of item

£ 458.33 (ex. VAT) 1 in stock

Coherent Innova 300C Laser Head, I90C-5-BD Power Supply, I300C Controller,

ITEM-12818

System is in good condition, includes a Laser Unit, Power Supply, Controller/Remote, Ethernet Cable & Pipe.


Unit was removed from a laser lab as surplus to requirements. We were assured it was in working order.


At our site we have not tested the system.

Image of item

£ 178.62 (ex. VAT) 1 in stock

Coherent Innova 700 Laser, Transformer & Controller (no Key) Lab Equipment

ITEM-05532

This Coherent Innova 700 Laser, Transformer & Controller (no key) came from a working Lab in a top UK University but is now surplus to requirements.  We were informed by our contact at the University that the Laser is in good working order.

Image of item

£ 372.29 (ex. VAT) 1 in stock

Coherent Innova 90 Laser, Transformer & Controller with Key Lab Equipment

ITEM-05531

This Coherent Innova 90 Laser, Transformer & Controller with Key came from a working Lab in a top UK University but is now surplus to requirements.  We were informed by our contact at the University that the Laser is in good working order.

Items 861 to 880 of 3286