All Products
Items 101 to 120 of 3024

£ 7,250.00 (ex. VAT) 1 in stock
Siemens QED TxRx CP Head Coil 3T Model No. (1P) 10496483
ITEM-28396
This Siemens QED TxRx CP Head Coil 3T Model No. (1P) 10496483 was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but it has not been tested at our facility. The lab believed it to be operational prior to going into storage. It was being used with an operational Siemens 3T Magnetom Trio system up until a system upgrade.
Interior dims:
H29cm x W27cm x D31cm

£ 7,145.00 (ex. VAT) 1 in stock
Siemens 3T Matrix A TIM Head Coil Model No. (1P) 08622644 with Interface Lab
ITEM-28397
This 3T Matrix A TIM Head Coil Model No. (1P) 08622644 was removed from a university lab where it was surplus to requirements.
The units have not been tested at our facility but the lab believed them to be operational prior to them going into storage. They were being used with an operational Siemens 3T Magnetom Trio system up until a system upgrade.
They are in very good cosmetic condition with only minor marks from use.
Included are;
3T Matrix A TIM Head Coil
Model No. (1P) 08622644
Interior Dims: H27cm x W25cm x D27cm
1x 3T Interface
Model No. (1P) 08625787

£ 7,095.00 (ex. VAT) 1 in stock
Jobin Yvon Horiba Ultima 2 Inductively Coupled Plasma Mass Spectrometer ICP OES
ITEM-28111
This Jobin Yvon Horiba Ultima 2 was removed from a university lab where it was surplus to requirements.
We had a qualified engineer check over and recertify the system. They had it working using the ICP Analyst 5.2 Software. It couldn't be completely tested without the use of Argon gas.
The system is in good cosmetic condition but has some minor marks from use.
1 x Jobin Yvon Horiba Ultima 2
Unit dimensions - L173 W74 H76cm
1 x Jobin Yvon Horiba Emission Autosampler:-
Model - AS 421
1 x Jobin Yvon Horiba Chiller
Type - GenCo
The temperature was first set to 35˚c and it reached 37˚c after half hour or so, then it was set to 8˚c and it dropped as low as 7˚c within 10 minutes.
All 3 units power on.
PC Equipment includes PC, Monitor, Keyboard, Mouse & 2 Cables. The PC has ICP Analyst 5.2 Software.

£ 7,060.00 (ex. VAT) 1 in stock
Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor Lab
ITEM-31255
This Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor was removed from a university lab where it was surplus to requirements.
The system powers up and is in reasonably good cosmetic condition with minor marks from previous use.
Main unit - L70 W58 H77cm
Frame - L68 W54 H57cm

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 7,035.00 (ex. VAT) 1 in stock
Perkin Elmer Optima 7300 DV Optical Emission Spectrometer Lab Spares/Repairs
ITEM-31383
This Perkin Elmer Optima 7300 DV Optical Emission Spectrometer was removed from a university lab where it was surplus to requirements.
The lab advised us that this requires a new pneumatics board and is not functional.
It is in good cosmetic condition with minor marks from use.
It is sold for spares/repairs.

£ POA 1 in stock
Labcyte Portrait 630 Reagent Multi-Spotter
ITEM-34741
This item is new in stock. Please enquire for further details.

£ 6,980.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Automated Liquid Handling Robot Bigneat Clean Air Lab
ITEM-23442
This Beckman Coulter Biomek NXp Automated Liquid Handling Robot System was removed from a university lab where it was surplus to requirements.
The NXp has a 96-well pipetting head as well as carousel to allow storage of plates/tips/reagents etc. The robot is not climate controlled but it is enclosed in a safety cabinet The NXp requires tips purchased from Biomek for accurate pipetting. The instrument is connected to a PC running software to enable programming and scheduling and have been used extensively for (though not limited to) cell-based screening (cell plating, transfection, fixation and staining), including siRNA screens and for cell-free screening with small molecule libraries, in both 96-well and 384-well format.
The system is in good used cosmetic condition but it does have various marks from general use. One end piece appears to be missing from the shroud sensor strip of the NXp. This does not affect the operation of the unit.
All parts power up as they should and appear to operate as they should.
The system consists of:
1 x Beckman Coulter Biomek NXp.
The unit has been powered up and the 'home all axis' program has been executed via the Biomek software.
It appears to run as it should. We have videos of it working.
1 x Thermo Cytomat Microplate Hotel with manual.
The unit powers up fine. The Cytomat has been 'initialized' and has had various commands executed via the Cytomat 6000 software. It appears to run as it should. (note that P1 on the multi cable is COM3 on the PC).
We also have videos of this working.
1 x Jun-Air 40 Liter Compressor with manual.
The unit powers up fine and supplies air to the Biomek as it should. It was tested via the 'Rods up' 'Rods down' control on the Biomek software.
1 x Thermo Scientific ALPS 3000 Automated Microplate Heat Sealer with MGF SIL-EOL 24/50 GF Compressor & manual.
The compressor appears to supply as it should although the ALPS 3000 has a 'low air' warning on it. We were unable to test any further.
The ALPS rear states 6bar of pressure but we could only get the compressor to supply 5bar. This is possibly why it has a 'low air' warning.
1 x BigNeat Robotics Bench Mounted Clean Air Enclosure made in 2007.
The enclosure is in good used cosmetic condition. Though it does have various marks from general use. The enclosure powers up fine, light and fan both work as they should. The Green illuminated switch does not light up for the fan. It is a very common issue and does not affect the operation of the unit.
BigNeat last tested it in 2021.
The enclosure measures:
(External) 210cm L x 100cm W x 168cm H.
(Internal) 202cm L x 92cm W x 116cm H to internal light.
1 x Lenovo ThinkCentre PC with Keyboard, Mouse & Monitor.
Includes a PCi card with a comm breakout cable to control all the systems.
The PC is running Windows XP.
There are Four user accounts setup the passwords have been removed from them all.
The PC has the following software installed:
Beckman Coulter Biomek 3.3.14.
Cytomat 6000.
Plus various other std Windows programs.
Also included are the following software packages on CD:
Beckman Coulter Biomek Tutorials for software version 3.3.
Beckman Coulter Install Disk BIOMEK SYSTEM Version 3.3 Build 14.
Beckman Coulter Accounts & Permissions Version 3.0.
Beckman Coulter Recovery DVD.
There are some spares included. We do not know the operational condition of them.
1 x SMC Booster Regulator NVBA1111-T02.
2 x Gurley Precision Instruments L18S001A0040A0020A 40mm Encoders.
2 x Boxes Thermo 59910052 Shandon Cytoclips.
2 x Cartons of Transnet YX Well Plates with shipping packs etc.
1 x Thermo AB-3738 Pierceable Sealing Foil 78mm Roll (brand new sealed).
2 x A19839 Extrusion Table Spacers (sealed in tubes).
2 x Pairs of A30107 Robot Gripper Rods.
Various boxes of consumables, cables & hoses.

£ 6,975.00 (ex. VAT) 1 in stock
HyClone 100L Single-Use Bioreactor SV50197.02 Lab
ITEM-31069
This HyClone 100L Single-Use Bioreactor was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with marks from use.
It comes with a 32A plug but has an adaptor with a standard plug.

£ 6,930.00 (ex. VAT) 1 in stock
Enraf Nonius XRD System FR590 Base X-Ray Diffraction System Lab
ITEM-21108
Large XRD Cabinet FR590 NONIUS Base X-Ray Diffraction System
This was removed from a university lab where it was surplus to requirements. The lab informed us that it was working the last time it was used though it has been in storage for some time.
Internal sizes of cabinet 200 (L) x 97 (B) x 84 (H) cms.
It comes with a Dell PC with the operating system and programs associated with the unit.
Programmes include:
IMAD V2.5
SYMPHONIX
PEAKOC
PROGRAMMATION.
The unit is in fair condition and has some age and usage-related marks. There is a box containing some parts that were left in the cabinet. The monitor, mouse and keyboard are not included in this sale.

£ 6,930.00 (ex. VAT) 1 in stock
Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A Lab
ITEM-25567
Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A
These units were removed from a university lab where they were surplus to requirements.
Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads.
They are in good cosmetic condition with minor marks from use.
1x Anritsu Error Detector MP1764A
Model. M06340
1x Anritsu Pulse Pattern Generator MP1763B
Model. M06940

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 6,860.00 (ex. VAT) 1 in stock
Priorclave Tactrol 2 Autoclave Type - PS/QCS/EH150 Lab
ITEM-25466
This Priorclave Tactrol 2 Autoclave Type - PS/QCS/EH150 was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in full working order. It has passed all safety checks. Af full report is available on request..
It is in good cosmetic condition with minor marks from use.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 6,805.00 (ex. VAT) 1 in stock
Nikon Eclipse 90i Fluorescence Microscope System Lab
ITEM-20655
This Nikon Eclipse 90i Fluorescence Microscope System was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced. The microscope's manual functionality is in good working condition and has been tested with the PC.
The system is in good used cosmetic condition. It has been tested with one of our slides and appears to work as it should though the geared teeth in the condenser adjuster appear to be broken. You cannot adjust the height of the condenser with the adjusters. It has to be done manually, though it is still perfectly usable.
The system has been fully connected to a PC with the included Nikon software installed. We have set up and viewed one of our slides via the PC monitor.
A 3.5" 500GB HDD with the Nikon software and a fresh install of Windows XP is included with the sale.
A PC with the software installed is included.
The system consists of:
1 x Nikon Eclipse 90i Microscope Body.(With Manual)
It is fitted with the following parts:
1 x Nikon Y-QT Camera Attachment.
1 x Nikon DS-Fi1 Camera
1 x Nikon DS-U2 Digital Sight Camera Controller (With Manual, PSU & Camera Cable)
1 x Nikon D-FL EPI Fluorescence Attachment. (With Manual)
1 x Nikon C-SRR-A Mechanical Rotatable Stage.
1 x Nikon D-CUD Universal Condensor.
1 x Nikon D-PS Power Supply.
1 x Nikon D-LH Halogen Lamp.
The microscope is fitted with 2 x objectives:
1 x Nikon
Plan
40x/0.65
Ph2 DL
∞/0.17 WD 0.56
1 x Nikon
Plan
100x/1.25 Oil
Ph3 DL
∞/0.17 WD 0.2
And a pair of Nikon Japan CFI 10x/22 Eyepieces.
Also included with the system is:
1 x Nikon C-C Achr Condenser.
2 x boxes of 22mm x 22mm Cover Glass.
Boxes are open and some have been used.
3 x Empty filter cube boxes.
1 x Bottle Sigma Immersion Oil used.
3 x Empty Objective Case.
1 x Nikon NIS-Elements NIS-A EDF module License Card.
1 x Nikon F package Version 2.3 NIS Elements Disc.
1 x Nikon Basic Research Version 2.32 Elements Disc.
1 x NIS Elements V3.0 Software Manual Copied disc.
1 x Roxio Easy Media Creator 9 Basic Edition Disc.
1 x Intervideo WinDVD Disc.
1 x HP Documentation And Diagnostics Disc.
1 x Nikon NIS-Elements NIS-D Z drive dongle and card.
1 x HP LCD Monitor Software.
1 x 3.5" 500GB HDD with the Nikon software and a fresh install of Windows XP.

£ 6,695.00 (ex. VAT) 1 in stock
MiE Medical Imaging Electronics Scintron Nuclear Gamma Camera Lab
ITEM-20623
This MiE Medical Imaging Electronics Scintron System was removed from a university lab where it was surplus to requirements.
The university reported: "MIE gamma camera. Fully working when last used (~6yrs ago)"
At our site we inspected the system and it appears in reasonably good cosmetic condition with some marks from use.
The system is comprised of;
1 x Scintron Monitor, Printer & Keyboard
All power on and work, the printer requires a new ink cartridge, the shift key is missing from the keyboard.
1 x Scintron V1 Program on a PC
All patient files, scans etc have been deleted from the PC.
1 x X-Ray Head - This was not tested.
The system has not as of yet been assessed by a medical imaging engineer. Therefore it must be safety inspected and certified appropriately prior to use.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 6,675.00 (ex. VAT) 1 in stock
Dionex Ion Chromatography System - AS50, GP502, ED50A ECD + PC & Dongle Lab
ITEM-21205
This Dionex Ion Chromatography System was removed from a university lab where it was surplus to requirements.
The system has been professionally serviced and re-certified. It is in full working order.
Included are;
1x Dionex AS50 AutoSampler
P/N 056857
1x Dionex AS50 Thermal Compartment
P/N 056536
1x Dionex Gradient Pump
Model GP50-2
1x Dionex Electrochemical Detector
Model ED50A
Dell Optiplex 360 PC that comes with this system has the following installed :-
Windows XP SP3
Chromeleon
Adobe Reader 9
Various microsoft programmes for operation.
There is also a green dongle that has software for the system that is encrypted to the PC.
Accessories:
1x Netgear Fast Ethernet Switch
The unit powers on and is in good cosmetic condition.
5x Ethernet Cables
The units are in good cosmetic condition.
2x Kimax Kimble Glass bottles w/ lids
Volume 2000ml

£ 6,620.00 (ex. VAT) 1 in stock
Rigaku Micro Max 007 X-ray Generator System Protein Crystallography + Marcam CCD
ITEM-21158
This Rigaku Micro Ma 007 X-ray Generator System was removed from a university lab where it was surplus to requirements.
We have been informed that the system had been working when last used but now requires a repair to the vacuum pump and they no longer need the system so did not invest in the repair. We do not have any more details on what is actually wrong with the vacuum pump. For buyers who are interested in the complete system, we do have a vacuum engineer who could potentially assess the vacuum fault but we have not investigated it at this stage.
The system is in very good condition but will require specialist re-commissioning and calibration before use.
Included in the system are;
1 X Rigaku Mar345 Dtd Unit Mounted On Very Heavy Duty Steel Desk. The unit has not been tested
1 X Oxford Cryostream Nitro Pump Cspu 100 - The unit powers up and seems to run fine.
2 X Hale Hamilton Diaphragm Pumps 5-30 Psi - The unit powers up and seems to run fine.
1 X Rotating Anode Dpta-2 Cu & Blanking Plate - The unit has not been tested
1 X Schott Kl 1500 Light Unit - The unit powers up and seems to run fine.
1 X Marcam Ccd X-ray Alignment Camera - The unit powers up and seems to run fine.
1 X Antec Fedora 11 Pc Unit - The unit powers up and seems to run fine. The password is supplied. it is running Linux and has software for the system.
1 X Edwards 5 Vacuum Pump - The unit has not been tested
3 X Oxford Cryosystems Controllers - The units power up and seem to run fine. - One has a faulty screen
1 X Oxford Cryosystems Ad41 Dry Air Unit - The unit powers up and seems to run fine.
3 X Oxford Cryosystems Nitro Gas Cooler Cold Hand. One is fitted to the system. Two In Large Wooden Boxes. - The units have not been tested.
1 X Haskris Hb18375 Cooler/pump - The unit powers up and seems to run fine.
1 X Tec Power Supply Unit - The unit has not been tested
Plus Lots Of Manuals And Logs For System.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 6,510.00 (ex. VAT) 1 in stock
New Brunswick Innova 44 Incubator/Environmental Shaker M1282-0002 Lab
ITEM-16782
This New Brunswick Innova 44 Incubator/Environmental Shaker was removed from a university lab where it was surplus to requirements.
The unit has been tested and rebuilt by and service engineer.
It has had the following replacement parts;
Screen.
Control knob.
New mount bolt kit.
The Shaker plate assembly was stripped and rebuilt.
2 x Shaker plate pivot pins.
1 x Shaker plate top bearing.
3 x Shaker bearing.
All brand new rubber isolation washers.
All wires in the motor were cut, re-soldered & heatshrunk etc.
The unit has been tested at 400rpm (max) and the incubator is in full working order.
Included with it are;
Multiple Sized Shaker Flask Clip Kits.
Multiple Sized Screws and Washers - One bottle labelled "Green Shakers", Another labelled " Screws for flask holder".
8 x 25ml Flask Clips.
3 x Plastic bases - 1 x 10cm in diameter, 2 x 7.4cm in diameter.
3 x Alan Keys - all different sizes.
3 x Xcelite P10 5/16 Alan key drivers.
A box of Springs.
A box of small (Same size of 25ml) flask clips.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 6,460.00 (ex. VAT) 1 in stock
Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System
ITEM-19538
This Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System was removed from a university lab where it was surplus to requirements.
All parts are in good used cosmetic condition but they do have signs of general use. We have powered it all up and the system appears to function as it should. We were able to view a slide via the software on the PC.
It is an excellent system and is in full working order. It has been professionally serviced. The comments from the service engineer are below.
It appears to be in good working condition but we have no way of checking the laser. The internal halogen works fine and so does the external metal halide illumination. Objectives UPlanFl 4x/0.13 ∞/- UPlanFl 10x/0.30 ∞/- LCPlanFl 20x/0.4 ∞/- LCPlanFl 40x/0.60 ∞/- Diagnostic Inst 1x C Mount adaptor. Some evidence of bleaching of fluorescence filters.
The system consists of:
1 x Olympus IX50 Microscope Modified by Arcturus.
With PixCell IIE LCM2016 Laser System (Manufactured September 2002).
The microscope is fitted with:
2 x Olympus WH10X/22 Eyepieces.
Olympus Objectives:
1 x Olympus
LCPlanFl
40x/0.60
∞/
1x Olympus
LCPlanFl
20x/0.40
∞/
1 x Olympus
UPlanFl
10x/0.30
∞/
1x Olympus
UPlanFl
4x/0.13
∞/-
1 x ZEISS
Plan-NEOFLUAR
40x/0.75
∞/0.17
(not fitted in the microscope).
1 x Dell Dimension 3000 PC with keyboard, mouse & monitor.
The PC has Arcturus ARC200 software installed and is fitted with a PCi card interface for the Hitachi camera.
1 x Olympus BH2-RFL-T3 Lamp PSU.
It is showing 71.2 lamp hours.
1 x Olympus U-ULS100HG 100w lamp
1 x Hitachi KP-D590P CCD Color Camera.
1 x Camera Remote Unit.
1 x Arcturus PixCell IIe Control Unit.
1 x MARX Crypto-Box.
1 x Arcturus 12109-00D Sample holder.
Various cables to connect the whole system.
Manuals.

£ 6,435.00 (ex. VAT) 1 in stock
RMC Products PowerTome PC Ultramicrotome + LKB 7800 KnifemakerLab
ITEM-19536
RMC Products PowerTome PC with LKB 7800 Knifemaker and Accessories
This was removed from a university lab where it was surplus to requirements. The unit was reported as being in full working order.
All items are in good used cosmetic condition.
The system consists of:
1 x RMC Products PowerTome PC main unit.
1 x Shuttle X PC with TekVisions touchscreen monitor, keyboard and mouse.
It is running Windows 2000 and has PowerTome PC Version 1,3,0,11 installed.
1 x LKB Bromma 7800 Knifemaker.
It comes with the follow glass:
2 x Full boxes of G329 Ultramicrotome Glass 406mm x 25.4 x 6mm (30 pieces each).
2 x Part used boxes G329.
1 x Boxed Drukker 160-124-0003
Standard Ultraknife 3mm.
WO: 176107
S/N: 464817
The PowerTome powers up fine and the PC software appears to control the unit. We have been able to switch both lights on and off and the cutting head moves when instructed to cut.
It was removed from a lab as they had bought a TEM to replace it so it was no longer required. The unit was reported as fully working when removed.

£ 6,415.00 (ex. VAT) 1 in stock
Stratagene MX3005P Multiplex Quantitative PCR System & Software Lab
ITEM-30456
This Stratagene MX3005P Multiplex Quantitative PCR System was removed from a university lab where it was surplus to requirements.
The unit has been tested by a service engineer who has deemed it to be fully working.
The main unit powers up and is in good used cosmetic condition but it does have some scrapes, scratches and marks from use.
The system includes:
1 x Agilent Stratagene MX3005P. (various marks from use)
1 x Dell Optiplex 7010 with keyboard, Mouse & Monitor.
The PC is running a fresh install of Windows 7. Also installed is a copy of Stratagene MxPro - Mx3005P v4.10 build 389. The software will control the Mx3005P unit. We have run a basic heat cycle with it and verified that the lamp will turn on & off.
The MX3005P has the following filters installed:
- CY5 - CY5 Filter Set - Excitation Wavelength(NM) 635 - Emission Wavelength(NM) 665.
- CY3 - CY3 Filter Set - Excitation Wavelength(NM) 545 - Emission Wavelength(NM) 568.
- ROX - ROX Filter Set - Excitation Wavelength(NM) 585 - Emission Wavelength(NM) 610
- HEX - HEX-JOE Filter Set - Excitation Wavelength(NM) 535 - Emission Wavelength(NM) 555
- FAM - FAM Filter Set - Excitation Wavelength(NM) 492 - Emission Wavelength(NM) 516

£ 6,390.00 (ex. VAT) 1 in stock
Bio-Rad C1000 Thermal Cycler with CFX96 Optics Module RT-PCR Lab
ITEM-20274
This Bio-Rad C1000 Thermal Cycler was removed from a university lab where it was surplus to requirements.
The item is in good cosmetic condition but there are some minor marks from prior use. There are no scratches or dents.
The item powered on without issue. It ran several self-tests and found no errors. The lid heating function works.
When set to 37˚C the thermometer measured 37.3˚C
When set to 100˚C the thermometer measured 98.2˚C
Items 101 to 120 of 3024